REPAIRS TO SECURITY WALL, COMPUND WALL, DRAIN, FENCING, GATES, HARDSTANDING AND PATHWAY AT CPE ADM AREA AND TECH AREA TAKU, CPE ITARSI UNDER GE (I) (P) FY JABALPUR

Amount

Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc. complete all as specified and as directed including removal of debris.

Material and labour for brickwork with subclass 'B' bricks straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

Material and labour for Brick work with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick wall built in CM 1:4 complete all as specified and directed.

Material and labour for providing cement concrete 1:4:8 type D2 (40 mm stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

Material and labour for providing cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) for surface channel and drain including necessary form work complete all as specified and as directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stopped ends etc. complete all as specified and as directed.

Taking down cement plaster of any description on brick walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brickwork or concrete surfaces, finished the surfaces even and smooth without using extra cement complete all as specified and as directed.

Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and as directed.

M&l for rendering 15 mm thick on faces other than fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for two coats of cement base paint on newly plastered surfaces of wall including preparation of surfaces over one coat of primer complete all as specified and as directed.

Material and labour for providing cement concrete 1:2:4 type B1 using 20mm graded aggregate as in in lintels upto 1.5m clear span, cills, steps; seismicand other similar bands, plinth courses, string courses, lacing courses, arapets and railings upto 60 cm in height, copings, kneelers, apex stones,bed plates, kerbs not provided , water troughs and the like including weathering, slightly rounded or chamfered angles, formwork and fair finishing the exposed surfaces of concrete and throating complete including demolition of existing reinforced cement concrete and removal of debris to a distance not exceeding 500m all as specified and as directed.

Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

Excavating over areas, under floor n exc 1.5m deep and getting out soft/loose soil of below floor complete all as specified and as directed.

M&L Broken stone or boulders hardcore of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

All as per item No. 15 here-in-before but in except material complete all as specified and as directed.

M&L for sand filling under floor or in foundations including watering and consolidation complete all as specified and directed

Material and labour for 75mm thick PCC (1:3:6) type C-2 (using 20 graded aggregate) as in pavement, fire breakers etc shall be laid in alternate bays complete all as specified and as directed.

Material and labour for 10mm thick vitrified parking tiles heavy duty exterior grade texured finished of size 300X300 mm laid over and including 15 mm thick screed bed in CM 1:6 as in parking shed path complete all as specified and directed.

Material and labour for 300x300x25 mm thick PCC designer Pre-polished tiles (Factory made) as in floors, set & jointed in neat cement slurry and pointed in coloured cement with pigment over and including 20mm thick screed bed or bedding layer in CM (1:6) complete all as specified and as directed.

Supply and laying (factory made) kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed.

Material and labour for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and pigment all as specified and directed.

Material and labour for 75 mm thick cement concrete type D2, 1:4:8 (using 40mm graded stone aggregate)as in sub base complete all as spciified and directed

Material and labour for 100mm thick cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) as flooring and finishing the surface even and smooth without using extra cement complete all as specified and directed.

Material and labour for 40 mm thick Plain cement concrete 1:2:4 type B1 ( using 20mm graded Stone aggregate) as in floors finishing cement concrete surface even and smooth with out using extra cement complete all as specified

Supply only 38 mm wide & 3 mm thick glass dividing strips complete all as specified and directed

Material and labour for providing reinforced cement concrete type B-l, 1:2:4 (20 mm graded aggregate) for cover slab set in cement mortar (1:4) as in drain cover including demolition of existing unserviceable RCC cover slab with MS handle complete all as specified and as directed.

Material and labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. complete all as specified and directed

Material and labour for mild steel TMT bar 6mm to 8mm dia as in stirrups cut to lenth bent to shape required including cranking, bending etc and lapping complete all as specified and as directed.

Dismantling of old chain link fencing including flat iron, line wire complete all as specified and as directed.

Dismantling of RCC posts or struts embedded in concrete any section, including taking out embedded portion and making good disturbed ground and disposal of old debris to outside the premises complete all as specified and as directed.

All as per Item No. 31 here-in-before but embedded in natural ground complete all as specified and as directed.

Supply only MS 10mm dia mild steel round bar Fe 290 Gde E - 165 quality as line wire for holding chain link mesh complete all as specified and as directed.

Supply and fix in repairs MS flat iron clamp, Angle posts and struts in fencing cutting tops to shape as directed, drilling holes, notching for wire etc. Flat iron fillets (For securing chain link fencing etc) and similar work conforming to Fe 290 Gde E - 165 complete all as specified and as directed.

Supply and fix GI chain link fening size of mesh (75x75mm) dia of mesh 4mm etc & fixed to angle iron post including provision of binding wire complete all as specified and as directed.

Material and labour for pre painted GALVALUME ALUMINIUM ZINC coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with tapping screws complete all as specified and directed.

Supply and fix mild steel bolts screw (machine made) with hexagonal or squre head at one end and scrw the other or screw both ends, each each screwed ends, to be fitted with washer and one hexagonal or squre nut exceeding 10cm and not exceeding 15 cm long and dia meter of shank 05 to 10mm, complete all as specified and directed.

Material and labour for PCC 1:4:8 type D2 using 40 mm graded aggregate for embedding posts and struts etc complete all as specified and as directed.

Material and labour for providing reinforced cement concrete type B-l, 1:2:4 (20 mm graded aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area n exc 100 sq. cm, with or without chamfered angles and flat, splayed, rounded or mitred tops as directedand fixed complete all as specified and as directed.

Dismantling of galvanised barber wire from the existing fencing complete all as specified and directed.

Supply and fixing in repair galvanized, 2 strand steel barbed wire 2.24mm dia barbard with 2mm dia barbs at 75 mm spacing straing and fixing to any type of standerd rairs strainig bolts, including and tying at crossing with and provision of galvnized mild wire, staples or steel pins etc.complete all as specified and directed. (including distmantling of unservisable barberdd wire) (Each line of wire to be measured).

All as per item No 41 here-in-before but restringing and rescrubbing only including making good staple complete all as specified and directed.

Material and labour for two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer to new steel surface including preparation of surfaces exceeding 10cm with or girth complete all as specified and as directed.

Material and labour for two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces of any description n.exc. 10cm width or girth including preparation of new surfaces complete all as specified and directed.

Material and labour for applying one coat of synthetic enamal paint on steel surface of any description over 10cm widht or girth incl preparation of old steel surfaces complete all as specified and directed.

Supply and fix in repair PVC (SWR) pipe 150 mm bore,single socketed, in any length with rubber ring joints fixed wall including PVC clip complete all as specified and directed.

Taking down mild steel gate exc 1.50 Sqm & n xc 4.00 Sqm each including making good complete all as specified and directed.

Taking out existing wall cladding of any type fiber sheets/granite stone and Supply and of fixing at site, of the Rectangular/square PANEL SCREW type system with Aluminium composite panel of Approved colour on Exterior walls, cloumn, arch, projection etc , ACP soffits, coping, slab projection at all heights and elevation including necessary aluminium framework and formwork up to 5m height. The aluminium composit panel should 4mm thick finishing,antibacterial, mould proof, fire proof, anti static PVDF coating. The external surface shall be finshed with PVDF based coating on the top side and service coating on the reverse side shall be with a polymer paint complete all as specified and directed.

Material and labour for structural steel work as in truss, rafter purling, made out of anglle/Hollowpipe/tube section including jointing cleats, plates flat iron, gusset plates, rails, braces etc conforming to Fe-290 Gde-E-165 complete all as specified and directed.

Supply and fix granite (of any type) (table rubbed and polished) 20mm thick machine cut, in steps, columns, jambs, pillasrs, window cill, cooking platform, walls and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including demolition of existing unserviceable RCC cover slab with MS handle complete all as specified and as directed.

All as per item No. 50 here-in-before but except granite stone complete all as specified and directed.

Dismantling of existing wall tiles /stones cladding and Material and labour for any coloured exterrrior wall cladding tiles 10 mm thick area of each tile exceeding 0.15 sqm but not exceeding 0.27 sqm thick on vertical surface such as wall cladding, skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in colour cement to match including 10mm thick cement plaster with cement mortar 1:4 complete all as specified and directed.

Supply and fixing for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, brackets of angle for chajja , etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing conforming to Fe.290.Gde-E-165 complete all as specified and as directed

Supply and fixing in repair letters made of stainless steel of any size and shape fixing with solvent complete all as specified and as directed

M/s SHIVRATAN CONSTRUCTION

TANUJ CONST. CO.

pyarelal galar

Singh and sons constructions