Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹4.6 Cr
EMD Value
₹4.6 L
Closing Date
12 Jan 2023, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
REPAIR AND RENOVATION WORK OF ALL P.G. DEPARTMENTS, GIRLS & BOYS HOSTEL, OLD ADMINISTRATIVE BUILDING UNDER UTKAL UNIVERSITY MAIN CAMPUS, VANI VIHAR, BHUBNAESWAR
NBCC/ODISHA/ZO/UTKAL/22-23/88
NBCC/ODISHA/ZO/UTKAL/22-23/88
Open Tender-Domestic
Civil Works General
Khordha, Odisha
₹11,800
₹4.6 L
12 Jan 2023
29 Dec 2022
12 Jan 2023
12 Jan 2023
31 Jan 2023
Sl No Department/Hostel CIVIIL PH WORKS Total Amount
SL No. Descriotion QTY UNIT RATE AMOUNT
1 Removing dry or oil bound distemper,
water proofing cement paint and the like
by scrapping, sand papering and preparing Sqm 2689.63 20.85 56078.75
the surface smooth including necessary
repairs to scratches etc. complete.
Finishing walls with Premium Acrylic
Smooth exterior paint with Silicone
additives of required Sqm 2689.63 108.60 292093.63
Old work (Two or more coats applied @
1.43 ltr/ 10 sqm)
over existing cement paint surface shade
3 Providing and applying white cement
based putty of average thickness 1 mm, of
approved brand and manufacturer, over Sqm 2689.63 123.85 333110.46
the plastered wall surface to prepare the
surface even and smooth complete
4 Painting with synthetic enamel paint of
approved brand and manufacture of
required colour to give an even shade :
One or more coats on old work
5 Painting with aluminium paint of approved
brand and manufacture to give an even
One or more coats on old work
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
WOMEN'S STUDIES
Descriotion UNIT QTY RATE AMOUNT
Removing dry or oil bound distemper, water proofing
cement paint and the like by scrapping, sand papering and
preparing the surface smooth including necessary repairs
to scratches etc. complete.
Finishing walls with Premium Acrylic Smooth exterior paint
with Silicone additives of required
Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm)
over existing cement paint surface shade
Providing and applying white cement based putty of
average thickness 1 mm, of approved brand and
manufacturer, over the plastered wall surface to prepare
the surface even and smooth complete
Painting with synthetic enamel paint of approved brand
4 and manufacture of required colour to give an even shade Sqm 56.46 86.55 4,886.54
: One or more coats on old work
Painting with aluminium paint of approved brand and
5 manufacture to give an even shade: One or more coats on Sqm 25.93 70.4 1,825.43
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
ENGLISH & ODIYA
Descriotion UNIT QTY RATE AMOUNT
Removing dry or oil bound distemper, water proofing cement
paint and the like by scrapping, sand papering and preparing
the surface smooth including necessary repairs to scratches
Finishing walls with Premium Acrylic Smooth exterior paint
with Silicone additives of required
Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm)
over existing cement paint surface shade
Providing and applying white cement based putty of average
thickness 1 mm, of approved brand and manufacturer, over
the plastered wall surface to prepare the surface even and
smooth complete
Painting with synthetic enamel paint of approved brand and
4 manufacture of required colour to give an even shade : One Sqm 233.36 86.55 20197.68
or more coats on old work
Painting with aluminium paint of approved brand and
5 manufacture to give an even shade: One or more coats on old Sqm 60.78 79.40 4825.99
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
MBA & AGRO-BUSINESS
Descriotion UNIT QTY RATE AMOUNT
Removing dry or oil bound distemper,
water proofing cement paint and the like
1 by scrapping, sand papering and preparing Sqm 3807.43 20.85 79385.02
the surface smooth including necessary
repairs to scratches etc. complete.
Finishing walls with Premium Acrylic
Smooth exterior paint with Silicone
additives of required
Old work (Two or more coats applied @
1.43 ltr/ 10 sqm)
over existing cement paint surface shade
Providing and applying white cement
based putty of average thickness 1 mm, of
3 approved brand and manufacturer, over Sqm 3807.43 123.85 471550.82
the plastered wall surface to prepare the
surface even and smooth complete
Painting with synthetic enamel paint of
approved brand and manufacture of
required colour to give an even shade :
One or more coats on old work
Painting with aluminium paint of approved
5 brand and manufacture to give an even Sqm 114.50 79.40 9091.15
shade: One or more coats on old work
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
SL No. Descriotion UNIT QTY RATE AMOUNT
Removing dry or oil bound distemper, water proofing
cement paint and the like by scrapping, sand papering
and preparing the surface smooth including necessary
repairs to scratches etc. complete.
Finishing walls with Premium Acrylic Smooth exterior
paint with Silicone additives of required
2 Old work (Two or more coats applied @ 1.43 ltr/ 10 Sqm 2236.28 108.60 242860.28
over existing cement paint surface shade
Providing and applying white cement based putty of
average thickness 1 mm, of approved brand and
manufacturer, over the plastered wall surface to
prepare the surface even and smooth complete
Painting with synthetic enamel paint of approved
4 brand and manufacture of required colour to give an Sqm 173.98 86.55 15057.77
even shade : One or more coats on old work
Painting with aluminium paint of approved brand and
5 manufacture to give an even shade: One or more coats Sqm 47.58 79.40 3778.14
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
MATHS & COMPUTER SCIENCE
SL No. Descriotion UNIT QTY RATE AMOUNT
Removing dry or oil bound distemper, water
proofing cement paint and the like by
1 scrapping, sand papering and preparing the Sqm 3254.28 20.85 67851.64
surface smooth including necessary repairs to
scratches etc. complete.
Finishing walls with Premium Acrylic Smooth
exterior paint with Silicone additives of
Old work (Two or more coats applied @ 1.43
over existing cement paint surface shade
Providing and applying white cement based
putty of average thickness 1 mm, of approved
3 brand and manufacturer, over the plastered Sqm 3254.28 123.85 403041.97
wall surface to prepare the surface even and
smooth complete
Painting with synthetic enamel paint of
approved brand and manufacture of required
colour to give an even shade : One or more
coats on old work
Painting with aluminium paint of approved
5 brand and manufacture to give an even shade: Sqm 92.67 79.40 7357.97
One or more coats on old work
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
Descriotion UNIT QTY RATE AMOUNT
Removing dry or oil bound distemper, water
proofing cement paint and the like by
1 scrapping, sand papering and preparing the Sqm 1392.49 20.85 29033.43
surface smooth including necessary repairs to
scratches etc. complete.
Finishing walls with Premium Acrylic Smooth
exterior paint with Silicone additives of
Old work (Two or more coats applied @ 1.43
Providing and applying white cement based
putty of average thickness 1 mm, of approved
3 brand and manufacturer, over the plastered Sqm 1392.49 123.85 172459.97
wall surface to prepare the surface even and
smooth complete
Painting with synthetic enamel paint of
approved brand and manufacture of required
colour to give an even shade : One or more
coats on old work
Painting with aluminium paint of approved
5 brand and manufacture to give an even shade: Sqm 106.51 79.40 8456.54
One or more coats on old work
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
HISTORY, POLITICAL SCIENCE, SANSKRIT, SOCIOLOGY, PUBLIC ADMINSTRATION
Descriotion UNIT QTY RATE AMOUNT
Removing dry or oil bound distemper, water
proofing cement paint and the like by
1 scrapping, sand papering and preparing the Sqm 6543.01 20.85 136421.78
surface smooth including necessary repairs
to scratches etc. complete.
Finishing walls with Premium Acrylic Smooth
2 exterior paint with Silicone additives of Sqm 6543.01 108.60 710571.01
Providing and applying white cement based
putty of average thickness 1 mm, of
3 approved brand and manufacturer, over the Sqm 6543.01 123.85 810351.93
plastered wall surface to prepare the surface
even and smooth complete
Painting with synthetic enamel paint of
approved brand and manufacture of
required colour to give an even shade : One
or more coats on old work
Painting with aluminium paint of approved
5 brand and manufacture to give an even Sqm 238.10 79.40 18905.46
shade: One or more coats on old work
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
PSYCHOLOGY, JOURNALISM & MASS COMMUNICATION
SL No. Descriotion UNIT QTY RATE AMOUNT
Removing dry or oil bound distemper, water proofing cement
paint and the like by scrapping, sand papering and preparing
the surface smooth including necessary repairs to scratches
Finishing walls with Premium Acrylic Smooth exterior paint
with Silicone additives of required Old work (Two or more
coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint
Providing and applying white cement based putty of average
thickness 1 mm, of approved brand and manufacturer, over
the plastered wall surface to prepare the surface even and
smooth complete
Painting with synthetic enamel paint of approved brand and
4 manufacture of required colour to give an even shade : One or Sqm 217.47 86.55 18822.21
more coats on old work
Painting with aluminium paint of approved brand and
5 manufacture to give an even shade:One or more coats on old Sqm 63.20 79.40 5017.84
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
SL No. Descriotion UNIT QTY RATE AMOUNT
Removing dry or oil bound distemper, water proofing
cement paint and the like by scrapping, sand papering and
preparing the surface smooth including necessary repairs to
scratches etc. complete.
Finishing walls with Premium Acrylic Smooth exterior paint
with Silicone additives of requir Old work (Two or more
coats applied @ 1.43 ltr/ 10 sqm)
over existing cement paint surface shade
13.80 Providing and applying white cement based putty of
average thickness 1 mm, of approved brand and
manufacturer, over the plastered wall surface to prepare
the surface even and smooth complete
Painting with synthetic enamel paint of approved brand and
4 manufacture of required colour to give an even shade : One Sqm 83.64 86.55 7239.31
or more coats on old work
Painting with aluminium paint of approved brand and
5 manufacture to give an even shade: One or more coats on Sqm 26.02 79.40 2066.17
Total 285129.41
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
SL No. Descriotion UNIT QTY RATE AMOUNT
Removing dry or oil bound distemper, water proofing cement paint
1 and the like by scrapping, sand papering and preparing the surface Sqm 1511.15 20.85 31507.53
smooth including necessary repairs to scratches etc. complete.
Finishing walls with Premium Acrylic Smooth exterior paint with
Silicone additives of required
Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm)
over existing cement paint surface shade
Providing and applying white cement based putty of average
thickness 1 mm, of approved brand and manufacturer, over the
plastered wall surface to prepare the surface even and smooth
Painting with synthetic enamel paint of approved brand and
4 manufacture of required colour to give an even shade : One or more Sqm 138.01 86.55 11944.87
coats on old work
Painting with aluminium paint of approved brand and manufacture
to give an even shade: One or more coats on old work
Total 397745.24
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
Descriotion UNIT QTY RATE AMOUNT
Removing dry or oil bound distemper, water proofing cement
paint and the like by scrapping, sand papering and preparing
the surface smooth including necessary repairs to scratches
Finishing walls with Premium Acrylic Smooth exterior paint
with Silicone additives of required
Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm)
over existing cement paint surface shade
Providing and applying white cement based putty of average
thickness 1 mm, of approved brand and manufacturer, over
the plastered wall surface to prepare the surface even and
smooth complete
Painting with synthetic enamel paint of approved brand and
4 manufacture of required colour to give an even shade : One Sqm 66.91 86.55 5791.45
or more coats on old work
Painting with aluminium paint of approved brand and
5 manufacture to give an even shade:One or more coats on old Sqm 14.87 79.40 1180.67
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
Descriotion UNIT QTY RATE AMOUNT
Removing dry or oil bound distemper, water proofing
cement paint and the like by scrapping, sand papering and
preparing the surface smooth including necessary repairs
to scratches etc. complete.
Finishing walls with Premium Acrylic Smooth exterior paint
with Silicone additives of required
Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm)
over existing cement paint surface shade
Providing and applying white cement based putty of
average thickness 1 mm, of approved brand and
manufacturer, over the plastered wall surface to prepare
the surface even and smooth complete
Painting with synthetic enamel paint of approved brand
4 and manufacture of required colour to give an even shade : Sqm 200.74 86.55 17374.35
One or more coats on old work
Painting with aluminium paint of approved brand and
5 manufacture to give an even shade: One or more coats on Sqm 59.48 79.40 4722.68
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
SL No. Descriotion UNIT QTY RATE AMOUNT
Removing dry or oil bound distemper,
water proofing cement paint and the like
by scrapping, sand papering and
preparing the surface smooth including
necessary repairs to scratches etc.
Finishing walls with Premium Acrylic
Smooth exterior paint with Silicone
additives of required
Old work (Two or more coats applied @
1.43 ltr/ 10 sqm)
over existing cement paint surface shade
Providing and applying white cement
based putty of average thickness 1 mm,
of approved brand and manufacturer,
over the plastered wall surface to
prepare the surface even and smooth
Painting with synthetic enamel paint of
approved brand and manufacture of
required colour to give an even shade :
One or more coats on old work
Painting with aluminium paint of
approved brand and manufacture to give
an even shade: One or more coats on old
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
SL No. Descriotion UNIT QTY RATE AMOUNT
Removing dry or oil bound distemper, water
proofing cement paint and the like by scrapping,
1 sand papering and preparing the surface Sqm 878.25 20.85 18311.57
smooth including necessary repairs to scratches
Finishing walls with Premium Acrylic Smooth
exterior paint with Silicone additives of required
2 Old work (Two or more coats applied @ 1.43 Sqm 878.25 108.60 95378.25
over existing cement paint surface shade
Providing and applying white cement based
putty of average thickness 1 mm, of approved
3 brand and manufacturer, over the plastered Sqm 878.25 123.85 108771.61
wall surface to prepare the surface even and
smooth complete
Painting with synthetic enamel paint of
approved brand and manufacture of required
colour to give an even shade :One or more
coats on old work
Painting with aluminium paint of approved
5 brand and manufacture to give an even shade: Sqm 25.87 79.40 2054.36
One or more coats on old work
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
SL No. Descriotion UNIT QTY RATE AMOUNT
Removing dry or oil bound distemper, water proofing
cement paint and the like by scrapping, sand papering
and preparing the surface smooth including necessary
repairs to scratches etc. complete.
Finishing walls with Premium Acrylic Smooth exterior
paint with Silicone additives of required
2 Old work (Two or more coats applied @ 1.43 ltr/ 10 Sqm 2577.88 108.60 279957.88
over existing cement paint surface shade
Providing and applying white cement based putty of
average thickness 1 mm, of approved brand and
manufacturer, over the plastered wall surface to
prepare the surface even and smooth complete
Painting with synthetic enamel paint of approved
4 brand and manufacture of required colour to give an Sqm 108.95 86.55 9429.20
even shade : One or more coats on old work
Painting with aluminium paint of approved brand and
5 manufacture to give an even shade: One or more coats Sqm 24.21 79.40 1922.28
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
PHARMACEUTICAL SCIENCE
Descriotion UNIT QTY RATE AMOUNT
Removing dry or oil bound distemper, water proofing
cement paint and the like by scrapping, sand
papering and preparing the surface smooth including
necessary repairs to scratches etc. complete.
Finishing walls with Premium Acrylic Smooth exterior
paint with Silicone additives of required Old work
(Two or more coats applied @ 1.43 ltr/ 10 sqm) over
existing cement paint surface shade
Providing and applying white cement based putty of
average thickness 1 mm, of approved brand and
manufacturer, over the plastered wall surface to
prepare the surface even and smooth complete
Painting with synthetic enamel paint of approved
4 brand and manufacture of required colour to give an Sqm 125.46 86.55 10858.97
even shade : One or more coats on old work
Painting with aluminium paint of approved brand and
5 manufacture to give an even shade: One or more Sqm 36.80 79.40 2922.16
coats on old work
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
Descriotion UNIT QTY RATE AMOUNT
Removing dry or oil bound distemper, water proofing
cement paint and the like by scrapping, sand papering
and preparing the surface smooth including necessary
repairs to scratches etc. complete.
Finishing walls with Premium Acrylic Smooth exterior
paint with Silicone additives of required
Old work (Two or more coats applied @ 1.43 ltr/ 10
sqm) over existing cement paint surface shade
Providing and applying white cement based putty of
average thickness 1 mm, of approved brand and
manufacturer, over the plastered wall surface to
prepare the surface even and smooth complete
Painting with synthetic enamel paint of approved brand
4 and manufacture of required colour to give an even Sqm 115.74 86.55 10017.40
shade : One or more coats on old work
Painting with aluminium paint of approved brand and
5 manufacture to give an even shade: One or more coats Sqm 40.59 79.40 3222.86
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
CENTRE FOR INNOVATION & INCUBATION BUILDING
SL No. Descriotion UNIT QTY RATE AMOUNT
Removing dry or oil bound distemper, water
proofing cement paint and the like by
1 scrapping, sand papering and preparing the Sqm 5577.83 20.85 116297.66
surface smooth including necessary repairs to
scratches etc. complete.
Finishing walls with Premium Acrylic Smooth
exterior paint with Silicone additives of
2 required Old work (Two or more coats applied Sqm 5577.83 108.60 605751.83
@ 1.43 ltr/ 10 sqm) over existing cement paint
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
Descriotion UNIT QTY RATE AMOUNT
Removing dry or oil bound distemper, water proofing cement
paint and the like by scrapping, sand papering and preparing
the surface smooth including necessary repairs to scratches
Finishing walls with Premium Acrylic Smooth exterior paint
with Silicone additives of required
2 13.112.1 Old work (Two or more coats applied @ 1.43 ltr/ 10 Sqm 2979.03 108.60 323523.03
over existing cement paint surface shade
Providing and applying white cement based putty of average
thickness 1 mm, of approved brand and manufacturer, over
the plastered wall surface to prepare the surface even and
smooth complete
Painting with synthetic enamel paint of approved brand and
4 manufacture of required colour to give an even shade :One or Sqm 3969.00 86.55 343516.95
more coats on old work
Painting with aluminium paint of approved brand and
5 manufacture to give an even shade: One or more coats on Sqm 641.00 79.40 50895.40
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
SL No. Descriotion UNIT QTY RATE AMOUNT
Removing dry or oil bound distemper, water proofing
cement paint and the like by scrapping, sand papering
and preparing the surface smooth including necessary
repairs to scratches etc. complete.
Finishing walls with Premium Acrylic Smooth exterior
paint with Silicone additives of required
Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm)
over existing cement paint surface shade
Painting with aluminium paint of approved brand and
3 manufacture to give an even shade: One or more coats Sqm 135.46 86.55 11723.66
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
OLD ADMINSTRATIVE BUILDING
Descriotion UNIT QTY RATE AMOUNT
1 Removing dry or oil bound distemper, water proofing
cement paint and the like by scrapping, sand papering and
preparing the surface smooth including necessary repairs to
scratches etc. complete.
Finishing walls with Premium Acrylic Smooth exterior paint
with Silicone additives of required Sqm 5814.87 108.60 631494.87
Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm)
over existing cement paint surface shade
3 Providing and applying white cement based putty of average
thickness 1 mm, of approved brand and manufacturer, over
the plastered wall surface to prepare the surface even and
smooth complete
4 Painting with synthetic enamel paint of approved brand and
manufacture of required colour to give an even shade : One Sqm 1308.35 86.55 113237.32
or more coats on old work
5 Painting with aluminium paint of approved brand and
manufacture to give an even shade: One or more coats on Sqm 1022.23 79.40 81165.06
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
BOYS' HOSTEL NO 3 (FAKIR MOHAN HOSTEL) TWO BLOCKS
Descriotion UNIT QTY RATE AMOUNT
1 Removing dry or oil bound distemper, water
proofing cement paint and the like by
scrapping, sand papering and preparing the
surface smooth including necessary repairs to
scratches etc. complete.
2 Finishing walls with Premium Acrylic Smooth
exterior paint with Silicone additives of
requied Old work (Two or more coats applied Sqm 4734.42 108.60 514158.42
@ 1.43 ltr/ 10 sqm)
over existing cement paint surface shade
3 Providing and applying white cement based
putty of average thickness 1 mm, of approved
brand and manufacturer, over the plastered Sqm 4734.42 123.85 586358.39
wall surface to prepare the surface even and
smooth complete
4 Painting with synthetic enamel paint of
approved brand and manufacture of required
colour to give an even shade : One or more
coats on old work
5 Painting with aluminium paint of approved
brand and manufacture to give an even
shade: One or more coats on old work
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
BOYS' HOSTEL NO 4 (GODABARISHA HOSTEL) TWO BLOCKS
Descriotion UNIT QTY RATE AMOUNT
Removing dry or oil bound distemper, water
proofing cement paint and the like by
1 scrapping, sand papering and preparing the Sqm 4377.66 20.85 91274.17
surface smooth including necessary repairs
to scratches etc. complete.
Finishing walls with Premium Acrylic Smooth
exterior paint with Silicone additives of
Old work (Two or more coats applied @ 1.43
over existing cement paint surface shade
Providing and applying white cement based
putty of average thickness 1 mm, of
3 approved brand and manufacturer, over the Sqm 4377.66 123.85 542172.94
plastered wall surface to prepare the surface
even and smooth complete
Painting with synthetic enamel paint of
approved brand and manufacture of required
colour to give an even shade : One or more
coats on old work
13.100 Painting with aluminium paint of
approved brand and manufacture to give an
even shade: 13.100.1 One or more coats on
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
BOYS' HOSTEL NO 5
SL No. Descriotion UNIT QTY RATE AMOUNT
Removing dry or oil bound distemper, water proofing
cement paint and the like by scrapping, sand papering and
preparing the surface smooth including necessary repairs to
scratches etc. complete.
Finishing walls with Premium Acrylic Smooth exterior paint
with Silicone additives of required
Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm)
over existing cement paint surface shade
Providing and applying white cement based putty of
average thickness 1 mm, of approved brand and
manufacturer, over the plastered wall surface to prepare
the surface even and smooth complete
Painting with synthetic enamel paint of approved brand and
4 manufacture of required colour to give an even shade : Sqm 336.66 86.55 29138.23
13.99.1 One or more coats on old work
13.100 Painting with aluminium paint of approved brand
5 and manufacture to give an even shade: 13.100.1 One or Sqm 201.67 79.40 16012.83
more coats on old work
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
BOYS' HOSTEL NO 6
No Descriotion UNIT QTY RATE AMOUNT
1 Removing dry or oil bound distemper, water proofing
cement paint and the like by scrapping, sand papering
and preparing the surface smooth including necessary Sqm 7520.30 20.85 156798.20
repairs to scratches etc. complete.
2 Finishing walls with Premium Acrylic Smooth exterior
paint with Silicone additives of required
Old work (Two or more coats applied @ 1.43 ltr/ 10 Sqm 7520.30 108.60 816704.30
over existing cement paint surface shade
3 Providing and applying white cement based putty of
average thickness 1 mm, of approved brand and
manufacturer, over the plastered wall surface to
prepare the surface even and smooth complete
4 Painting with synthetic enamel paint of approved brand
and manufacture of required colour to give an even Sqm 1255.27 86.55 108643.98
shade : One or more coats on old work
5 Painting with aluminium paint of approved brand and
manufacture to give an even shade: One or more coats Sqm 178.58 79.40 14179.10
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
BOYS' HOSTEL NO 7
Descriotion UNIT QTY RATE AMOUNT
Removing dry or oil bound distemper, water proofing
cement paint and the like by scrapping, sand papering
and preparing the surface smooth including necessary
repairs to scratches etc. complete.
Finishing walls with Premium Acrylic Smooth exterior
paint with Silicone additives of required
2 Old work (Two or more coats applied @ 1.43 ltr/ 10 Sqm 2822.23 108.60 306494.23
over existing cement paint surface shade
Providing and applying white cement based putty of
average thickness 1 mm, of approved brand and
manufacturer, over the plastered wall surface to
prepare the surface even and smooth complete
Painting with synthetic enamel paint of approved brand
4 and manufacture of required colour to give an even Sqm 795.39 86.55 68841.34
shade : 13.99.1 One or more coats on old work
Painting with aluminium paint of approved brand and
5 manufacture to give an even shade: One or more Sqm 178.58 79.40 14179.10
coats on old work
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
LADIES' HOSTEL NO 4
Descriotion UNIT QTY RATE AMOUNT
Removing dry or oil bound distemper, water proofing cement paint and
1 the like by scrapping, sand papering and preparing the surface smooth Sqm 2506.17 20.85 52253.67
including necessary repairs to scratches etc. complete.
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone
additives of required
Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm)
over existing cement paint surface shade
Providing and applying white cement based putty of average thickness 1
3 mm, of approved brand and manufacturer, over the plastered wall surface Sqm 2506.17 123.85 310389.28
to prepare the surface even and smooth complete
Painting with synthetic enamel paint of approved brand and manufacture
of required colour to give an even shade : One or more coats on old work
13.100 Painting with aluminium paint of approved brand and manufacture
to give an even shade: 13.100.1 One or more coats on old work
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
LADIES' HOSTEL NO 5
Descriotion UNIT QTY RATE AMOUNT
13.91 Removing dry or oil bound distemper, water
proofing cement paint and the like by scrapping, sand
papering and preparing the surface smooth including
necessary repairs to scratches etc. complete.
13.112 Finishing walls with Premium Acrylic Smooth
exterior paint with Silicone additives of required
2 13.112.1 Old work (Two or more coats applied @ 1.43 ltr/ Sqm 9443.42 108.60 1025555.42
over existing cement paint surface shade
13.80 Providing and applying white cement based putty
of average thickness 1 mm, of approved brand and
manufacturer, over the plastered wall surface to prepare
the surface even and smooth complete
13.99 Painting with synthetic enamel paint of approved
4 brand and manufacture of required colour to give an Sqm 1921.91 86.55 166341.30
even shade : 13.99.1 One or more coats on old work
13.100 Painting with aluminium paint of approved brand
5 and manufacture to give an even shade: 13.100.1 One or Sqm 282.53 79.40 22432.71
more coats on old work
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
LADIES' HOSTEL NO 6
Descriotion UNIT QTY RATE AMOUNT
Removing dry or oil bound distemper,
water proofing cement paint and the like
by scrapping, sand papering and
preparing the surface smooth including
necessary repairs to scratches etc.
Finishing walls with Premium Acrylic
Smooth exterior paint with Silicone
additives of required
2 Old work (Two or more coats applied @ Sqm 4427.84 108.60 480863.84
1.43 ltr/ 10 sqm)
over existing cement paint surface
Painting with synthetic enamel paint of
approved brand and manufacture of
required colour to give an even shade :
13.99.1 One or more coats on old work
Painting with aluminium paint of
approved brand and manufacture to
give an even shade: One or more coats
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
LADIES' HOSTEL NO 7
SL No. Descriotion UNIT QTY RATE AMOUNT
Removing dry or oil bound distemper, water
proofing cement paint and the like by scrapping,
1 sand papering and preparing the surface smooth Sqm 4069.07 20.85 84840.12
including necessary repairs to scratches etc.
Finishing walls with Premium Acrylic Smooth
exterior paint with Silicone additives of required
2 Old work (Two or more coats applied @ 1.43 ltr/ Sqm 4069.07 108.60 441901.07
over existing cement paint surface shade
Painting with synthetic enamel paint of
approved brand and manufacture of required
colour to give an even shade : 13.99.1 One or
more coats on old work
Painting with aluminium paint of approved brand
4 and manufacture to give an even shade: One or Sqm 213.57 79.40 16957.36
more coats on old work
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
PG Department of Chemistry
Sl No Item Unit Quanity Rate in Rs. Amount in Rs.
Dismantling G.I. pipes (external work) including excavation
and refilling trenches after taking out the pipes, manually/ by
mechanical means including stacking of pipes within 50
metres lead as per direction of Engineer-in-charge
15 mm to 40 mm nominal bore Rm 36.00 142.10 5115.60
Dismantling aluminium/ Gypsum partitions, doors, windows,
fixed glazing and false ceiling including disposal of
unserviceable material and stacking of serviceable material
with in 50 meters lead as directed by Engineer-in-charge.
Providing and fixing white vitreous china flat back or wall
corner type lipped front urinal basin of 430x260x350 mm
and 340x410x265 mm sizes respectively with automatic
3 flushing cistern with standard flush pipe and C.P. brass
spreaders with brass unions and G.I clamps complete,
including painting of fittings and brackets, cutting and
making good the walls and floors wherever required :
One urinal basin with 5 litre white P.V.C. automatic flushing
Single half stall urinal with 5 litre P.V.C. automatic flushing
White Vitreous China Wash basin size 550x400 mm with a
pair of 15 mm C.P. brass pillar taps
Providing and fixing white vitreous china water closet
squatting pan (Indian type) :
Orissa pattern W.C. pan of size 580x440 mm No 6.00 2758.20 16549.20
Providing and fixing P.V.C. low level flushing cistern with
8 manually controlled device (handle lever) conforming to IS :
7231, with all fittings and fixtures complete:
10 litre capacity - White No 8.00 1023.05 8184.40
Providing and fixing controlled flush, low level cistern made
of vitreous china with all fittings complete:
10 litre (full flush) capacity-white
Providing and fixing white vitreous china squatting plate
urinal with integral rim longitudinal flush pipe:
Providing and fixing white vitreous china wash basin
11 including making all connections but excluding the cost of
Flat back wash basin of size 550x400 mm No 6.00 915.45 5492.70
Providing and fixing P.V.C. waste pipe for sink or wash
basin including P.V.C. waste fittings complete.
Flexible pipe 17.28.2.1 32 mm dia.: No 6.00 104.35 626.10
Providing and fixing 600x450 mm beveled edge mirror of
superior glass (of approved quality) complete with 6 mm
thick hard board ground fixed to wooden cleats with C.P.
brass screws and washers complete.
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)
pipes, having thermal stability for hot & cold water supply,
including all CPVC plain & brass threaded fittings, i/c fixing
the pipe with clamps at 1.00 m spacing. This includes
14 jointing of pipes & fittings with one step CPVC solvent
cement and the cost of cutting chases and making good the
same including testing of joints complete as per direction of
Engineer in Charge. Concealed work, including cutting
chases and making good the walls etc.
20 mm nominal dia Pipes Rm 30.00 513.75 15412.50
25 mm nominal dia Pipes Rm 30.00 626.05 18781.50
32 mm nominal dia Pipes Rm 60.00 712.75 42765.00
Providing and fixing gun metal gate valve with C.I. wheel of
approved quality (screwed end) :
32 mm nominal bore. No 3.00 589.90 1769.70
40 mm nominal bore No 1.00 707.30 707.30
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
Sl No Item Unit Quanity Rate in Rs. Amount in Rs.
Providing and fixing ball valve (brass) of approved quality,
High or low pressure, with plastic floats complete :
25 mm nominal bore No 1.00 399.15 399.15
Providing and fixing C.P. brass bib cock of approved quality
conforming to IS:8931 :
15 mm nominal bore No 8.00 434.20 3473.60
Providing and fixing C.P. brass long body bib cock of
18 approved quality conforming to IS standards and weighing
not less than 690 gms.
15 mm nominal bore each No 8.00 708.40 5667.20
Providing and fixing C.P. brass angle valve for basin mixer
and geyser points of approved quality conforming to IS:8931
15mm nominal bore No 10.00 500.35 5003.50
Providing and fixing C.P. Brass extension nipple (size
20 15mmx50mm) of approved make and quality as per No 5.00 61.70 308.50
direction of Engineer-in-charge.
Cutting holes up to 15x15 cm in R.C.C. floors and roofs for
21 passing drain pipe etc. and repairing the hole after insertion
of drain pipe etc. with cement concrete
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate
20 mm nominal size), including finishing complete so as to No 10.00 377.10 3771.00
make it leak proof
Making chases up to 7.5x7.5 cm in walls including making
22 good and finishing with matching surface after housing G.I. Rm 5.00 171.80 859.00
Making hole up to 20x20 cm and embedding pipes up to
23 150 mm diameter in masonry and filling with cement
1:3:6 (1 cement : 3 coarse sand: 6 graded stone aggregate
20 mm nominal size) including disposal of malba
Dismantling old C.I. pipes including excavation and refilling
trenches after taking out the pipes, breaking lead caulked
joints, melting of lead and making into blocks, including
stacking of pipes at site lead up to 50 metre:
100 mm diameter C.I. pipe Rm 40.00 340.80 13632.00
Constructing brick masonry manhole in cement mortar 1:4 (
1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3
mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone
aggregate 20 mm nominal size), foundation concrete 1:4:8
mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone
aggregate 40 mm nominal size), inside plastering 12 mm
thick with cement mortar 1:3 (1 cement : 3 coarse sand)
finished with floating coat of neat cement and making
channels in cement concrete 1:2:4 (1 cement : 2 coarse
sand : 4 graded stone aggregate 20 mm nominal size)
finished with a floating coat of neat cement complete as per
standard design :
Inside size 90x80 cm and 45 cm deep including C.I. cover
with frame (light duty) 455x610 mm internal dimensions,
total weight of cover and frame to be not less than 38 kg
(weight of cover 23 kg and weight of frame 15 kg) :
With common burnt clay F.P.S. (non modular) bricks of
class designation 7.5
Providing and fixing in position pre-cast R.C.C. manhole
26 cover and frame of required shape and approved quality
Rectangular shape 600x450 mm internal dimensions No 2.00 1255.25 2510.50
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
Sl No Item Unit Quanity Rate in Rs. Amount in Rs.
Making connection of drain or sewer line with existing
manhole including breaking into and making good the walls,
floors with cement concrete 1:2:4 mix (1 cement : 2 coarse
sand : 4 graded stone aggregate 20 mm nominal size)
cement plastered on both sides with cement mortar 1:3 (1
cement : 3 coarse sand), finished with a floating coat of neat
cement and making necessary channels for the drain etc.
For pipes 100 to 250 mm diameter No 1.00 683.70 683.70
Dismantling of manhole including R.C.C. top slab, C.I.
cover with frame, including stacking of useful materials near
the site and disposal of unserviceable materials within 50 m
lead as per direction of Engineer-in-charge:
Rectangular manhole 90x80 cm and 45 cm deep No 1.00 2096.10 2096.10
Constructing brick masonry road gully chamber 45x45x77.5
cm with bricks in cement mortar 1:4 (1 cement : 4 coarse
29 sand ) with precast R.C.C. vertical grating complete as per No 3.00 6258.20 18774.60
standard design : 19.28.1 With common burnt clay F.P.S.
(non modular) bricks of class designation 7.5
Constructing brick masonry chamber for underground C.I.
inspection chamber and bends with bricks in cement mortar
1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light
duty) 455x610 mm internal dimensions, total weight of cover
with frame to be not less than 38 kg (weight of cover 23 kg
and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix
30 (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm
nominal size), foundation concrete 1:5:10 (1 cement : 5 fine
sand : 10 graded stone aggregate 40 mm nominal size),
inside plastering 12 mm thick with cement mortar 1:3 (1
cement : 3 coarse sand), finished smooth with a floating
coat of neat cement on walls and bed concrete etc.
complete as per standard design:
Inside dimensions 500x700 mm and 45 cm deep for pipe
line with one or two inlets :
With common burnt clay F.P.S. (non modular) bricks of
class designation 7.5
Inside dimensions 600x 850 mm and 45 cm deep for pipe
line with three or more inlets :
With common burnt clay F.P.S. (non modular) bricks of
class designation 7.5
31 Extra for depth beyond 45 cm of brick masonry chamber :
2 For 500x700 mm size 19.31.2.1 With common burnt clay
F.P.S. (non modular) bricks of class designation 7.5
For 600x850 mm size 19.31.3.1 With common burnt clay
F.P.S. (non modular) bricks of class designation 7.5
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45
cm dry brick honey comb shaft with bricks and S.W. drain
pipe 100 mm diameter, 1.8 m long complete as per
standard design.
With common burnt clay F.P.S. (non modular) bricks of
class designation 7.5
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
Sl No Item Unit Quanity Rate in Rs. Amount in Rs.
Supplying all materials,labour,T&P and fitting and fixing U-
PVC SWR soil waste ventilating pipes and fittings of the
following outside diameter conforming to ISI No.13592/1992
to walls with nails,bobbins and wooden plugs or laying in
33 trenches including jointing with supply of approved rubber
lubricant by non-heat application method/as per
manufacturer's specification,testing,earthwork in excavation
in all kinds of soil and refilling of trenches as per
specification and direction of Engineer-in-charge
110mm dia. U-PVC SWR pipes(Supreme/Ashirvad make
75mm dia. U-PVC SWR pipes(Supreme/Ashirvad make
110mm dia. U-PVC door bend each 4.00 293.60 1174.40
110mm dia. U-PVC plain bend each 4.00 232.00 928.00
110mm dia. U-PVC plain tee each 4.00 322.70 1290.80
110mm dia. U-PVC door tee each 4.00 386.00 1544.00
110mm dia. U-PVC "P" trap each 4.00 497.30 1989.20
110mm dia. U-PVC plain shoe bend each 4.00 232.00 928.00
110mm dia. U-PVC offset without ear each 4.00 407.40 1629.60
110mm dia. U-PVC vent cowl each 4.00 58.20 232.80
110mm dia. U-PVC socket plain each 4.00 160.10 640.40
75mm dia. U-PVC door bend each 4.00 184.00 736.00
75mm dia. U-PVC plain bend each 4.00 225.10 900.40
Dismantling tile work in floors and roofs laid in cement
mortar including stacking material within 50 metres lead.
For thickness of tiles 10 mm to 25 mm sqm 28.40 60.50 1718.26
Supplying all materials,labour,T&P and laying in trenches (
to level or slope ) unplasticized PVC pipe conforming to
IS:4985/2000 of the following outside dia for class-3
(0.60mpa) including jointing with supply of approved solvent
cement by non-heat application method/ as per
35 manufactures's providing and laying in trench cement
concrete(1:4:8) with 40 mm size hard granite metal in the
Type-C-1 standard bedding surrounding or encasing
including concrete for bedding and curing etc all complete
as per PH specification and direction of the Engineer-in-
110mm dia U-PVC pipe ( Allround concrete ) mtr 15.00 982.50 14737.50
160mm dia U-PVC pipe ( Allround concrete ) mtr 10.00 1608.50 16085.00
Supplying fitting and fixing 30mm thick Solid panel PVC
door shutter consisting of frame made out of MS tube of 19
gauge thickness and size of 19mmx19mm for stile &
15mmx15mm for top and bolt rails set with PVC door
frame(Choukatha)of size 50mmx47mm is made out of 5cm
36 thick sheet properly joined with solvent cement adhesive as
per section view with MS square tube of 19mm of 19mm
gauge to be inserted inside to give extra structural strength
the price is inclusive of all cost of all materials labour,T&P
etc.complete in all respect as per direction of the Engineer-
Providing and laying Ceramic glazed floor tiles of size
300x300 mm (thickness to be specified by the
manufacturer) of 1st quality conforming to IS : 15622 of
approved make in colours such as White, Ivory, Grey, Fume
Red Brown, laid on 20 mm thick cement mortar 1:4 (1
Cement : 4 Coarse sand), Jointing with grey cement slurry
@ 3.3 kg/sqm including pointing the joints with white
cement and matching pigment etc., complete
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
Sl No Item Unit Quanity Rate in Rs. Amount in Rs.
Providing and fixing Ist quality ceramic glazed wall tiles
conforming to IS: 15622 (thickness to be specified by the
manufacturer), of approved make, in all colours, shades
except burgundy, bottle green, black of any size as
38 approved by Engineer-in-Charge, in skirting, risers of steps sqm 10.00 1063.45 10634.50
and dados, over 12 mm thick bed of cement mortar 1:3 (1
cement : 3 coarse sand) and jointing with grey cement slurry
@ 3.3kg per sqm, including pointing in white cement mixed
with pigment of matching shade complete.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
PG Department of Anthropolgy & Statistics
Sl No Item Unit Quanity Rate in Rs. Amount in Rs.
Dismantling G.I. pipes (external work) including excavation and
refilling trenches after taking out the pipes, manually/ by
mechanical means including stacking of pipes within 50 metres
lead as per direction of Engineer-in-charge
15 mm to 40 mm nominal bore Rm 40.00 142.10 5684.00
Dismantling aluminium/ Gypsum partitions, doors, windows, fixed
glazing and false ceiling including disposal of unserviceable
material and stacking of serviceable material with in 50 meters
lead as directed by Engineer-in-charge.
Providing and fixing white vitreous china flat back or wall corner
type lipped front urinal basin of 430x260x350 mm and
340x410x265 mm sizes respectively with automatic flushing
3 cistern with standard flush pipe and C.P. brass spreaders with
brass unions and G.I clamps complete, including painting of
fittings and brackets, cutting and making good the walls and floors
wherever required :
One urinal basin with 5 litre white P.V.C. automatic flushing cistern No 8.00 5268.85 42150.80
Providing and fixing white vitreous china flat back half stall urinal
of size 580x380x350 mm with white PVC automatic flushing
cistern, with fittings, standard size C.P. brass flush pipe,
4 spreaders with unions and clamps (all in C.P. brass) with waste
fitting as per IS : 2556, C.I. trap with outlet grating and other
couplings in C.P. brass, including painting of fittings and cutting
and making good the walls and floors wherever required :
Single half stall urinal with 5 litre P.V.C. automatic flushing cistern No 6.00 10128.30 60769.80
Providing and fixing one piece construction white vitreous china
squatting plate with an integral longitudinal flushing pipe, white
P.V.C. automatic flushing cistern, with fittings, standard size G.I. /
5 PVC flush pipe for back and front flush with standard spreader
pipes with fittings, G.I clamps and C.P. brass coupling complete,
including painting of fittings and cutting and making good the
walls and floors etc. wherever required :
Single squatting plate with 5 litre P.V.C. automatic flushing cistern
Providing and fixing wash basin with C.I. brackets, 15 mm C.P.
brass pillar taps, 32 mm C.P. brass waste of standard pattern,
including painting of fittings and brackets, cutting and making
good the walls wherever required:
White Vitreous China Wash basin size 550x400 mm with a pair of
15 mm C.P. brass pillar taps
Providing and fixing white vitreous china water closet squatting
pan (Indian type) :
Orissa pattern W.C. pan of size 580x440 mm No 6.00 2758.20 16549.20
Providing and fixing P.V.C. low level flushing cistern with manually
8 controlled device (handle lever) conforming to IS : 7231, with all
fittings and fixtures complete:
10 litre capacity - White No 6.00 1023.05 6138.30
Providing and fixing controlled flush, low level cistern made of
vitreous china with all fittings complete:
10 litre (full flush) capacity-white
Providing and fixing white vitreous china squatting plate urinal
with integral rim longitudinal flush pipe:
Providing and fixing white vitreous china wash basin including
making all connections but excluding the cost of fittings :
Flat back wash basin of size 550x400 mm No 6.00 915.45 5492.70
Providing and fixing P.V.C. waste pipe for sink or wash basin
including P.V.C. waste fittings complete.
Flexible pipe 17.28.2.1 32 mm dia.: No 6.00 104.35 626.10
Providing and fixing 600x450 mm beveled edge mirror of superior
glass (of approved quality) complete with 6 mm thick hard board
ground fixed to wooden cleats with C.P. brass screws and
washers complete.
Providing and fixing soil, waste and vent pipes : 17.35.1 100 mm
Sand cast iron S&S pipe as per IS: 1729
Providing and filling the joints with spun yarn, cement slurry and
cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes :
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
Sl No Item Unit Quanity Rate in Rs. Amount in Rs.
100 mm dia pipe
Providing and fixing M.S. holder-bat clamps of approved design to
Sand Cast iron/cast iron (spun) pipe embedded in and including
16 cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2
coarse sand : 4 graded stone aggregate 20 mm nominal size),
including cost of cutting holes and making good the walls etc. :
For 100 mm dia pipe
Providing and fixing bend of required degree with access door,
insertion rubber washer 3 mm thick, bolts and nuts complete.
17.38.1 100 mm dia 17.38.1.1 Sand cast iron S&S as per IS -
Providing and fixing plain bend of required degree. 17.39.1 100
Sand cast iron S&S as per IS - 1729
19 Providing and fixing heel rest sanitary bend 17.40.1 100 mm dia.:
Sand cast iron S&S as per IS - 1729
Providing and fixing single equal plain junction of required degree
20 with access door, insertion rubber washer 3 mm thick, bolts and
nuts complete. 17.43.1 100x100x100 mm:
Sand cast iron S&S as per IS - 1729
Providing and fixing single equal plain junction of required degree
Sand cast iron S&S as per IS - 1729
Providing and fixing sand cast iron S&S off sets as per IS: 1729
17.53.1 76 mm off sets
With 100 mm dia pipe
Providing lead caulked joints to sand cast iron/centrifugally cast
(spun) iron pipes and fittings of diameter :
Providing and fixing trap of self cleansing design with screwed
24 down or hinged grating with or without vent arm complete,
including cost of cutting and making good the walls and floors :
100 mm inlet and 100 mm outlet
Sand cast iron S&S as per IS: 3989
Painting sand cast iron/ centrifugally cast (spun) iron soil, waste
vent pipes and fittings with two coats of synthetic enamel paint of
any colour such as chocolate grey, or buff etc. over a coat of
primer (of approved quality) for new work :
100 mm diameter pipe
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,
having thermal stability for hot & cold water supply, including all
CPVC plain & brass threaded fittings, i/c fixing the pipe with
clamps at 1.00 m spacing. This includes jointing of pipes & fittings
with one step CPVC solvent cement and the cost of cutting
chases and making good the same including testing of joints
complete as per direction of Engineer in Charge. Concealed work,
including cutting chases and making good the walls etc.
20 mm nominal dia Pipes Rm 40.00 513.75 20550.00
25 mm nominal dia Pipes Rm 40.00 626.05 25042.00
32 mm nominal dia Pipes Rm 60.00 712.75 42765.00
Providing and fixing gun metal gate valve with C.I. wheel of
approved quality (screwed end) :
32 mm nominal bore. No 3.00 589.90 1769.70
40 mm nominal bore No 1.00 707.30 707.30
Providing and fixing ball valve (brass) of approved quality, High or
low pressure, with plastic floats complete :
25 mm nominal bore No 1.00 399.15 399.15
Providing lead caulked joints to spun iron or C.I. pipes and
29 specials, including testing of joints but excluding the cost of pig
100 mm diameter pipe
30 Supplying pig lead at site of work.
Providing and fixing C.P. brass bib cock of approved quality
conforming to IS:8931 :
15 mm nominal bore No 8.00 434.20 3473.60
Providing and fixing C.P. brass long body bib cock of approved
32 quality conforming to IS standards and weighing not less than 690
15 mm nominal bore each No 8.00 708.40 5667.20
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
Sl No Item Unit Quanity Rate in Rs. Amount in Rs.
Providing and fixing C.P. brass stop cock (concealed) of standard
design and of approved make conforming to IS:8931.
15 mm nominal bore each
Providing and fixing C.P. brass angle valve for basin mixer and
geyser points of approved quality conforming to IS:8931
15mm nominal bore No 10.00 500.35 5003.50
Providing and fixing C.P. Brass extension nipple (size
35 15mmx50mm) of approved make and quality as per direction of No 5.00 61.70 308.50
Engineer-in-charge.
Cutting holes up to 15x15 cm in R.C.C. floors and roofs for
36 passing drain pipe etc. and repairing the hole after insertion of
drain pipe etc. with cement concrete
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20
mm nominal size), including finishing complete so as to make it No 10.00 377.10 3771.00
Making chases up to 7.5x7.5 cm in walls including making good
and finishing with matching surface after housing G.I. pipe etc.
Making hole up to 20x20 cm and embedding pipes up to 150 mm
diameter in masonry and filling with cement concrete
1:3:6 (1 cement : 3 coarse sand: 6 graded stone aggregate 20
mm nominal size) including disposal of malba
Dismantling old C.I. pipes including excavation and refilling
trenches after taking out the pipes, breaking lead caulked joints,
melting of lead and making into blocks, including stacking of pipes
at site lead up to 50 metre:
100 mm diameter C.I. pipe Rm 40.00 340.80 13632.00
Constructing brick masonry manhole in cement mortar 1:4 ( 1
cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1
cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20
mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4
coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal
40 size), inside plastering 12 mm thick with cement mortar 1:3 (1
cement : 3 coarse sand) finished with floating coat of neat cement
and making channels in cement concrete 1:2:4 (1 cement : 2
coarse sand : 4 graded stone aggregate 20 mm nominal size)
finished with a floating coat of neat cement complete as per
standard design :
Inside size 90x80 cm and 45 cm deep including C.I. cover with
frame (light duty) 455x610 mm internal dimensions, total weight of
cover and frame to be not less than 38 kg (weight of cover 23 kg
and weight of frame 15 kg) :
With common burnt clay F.P.S. (non modular) bricks of class designation
Inside size 120x90 cm and 90 cm deep including C.I. cover with
frame (medium duty) 500 mm internal diameter, total weight of
cover and frame to be not less than 116 kg (weight of cover 58 kg
and weight of frame 58 kg) :
With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5
41 Extra for depth for manholes :
With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5
With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5
Providing and fixing in position pre-cast R.C.C. manhole cover
and frame of required shape and approved quality 19.19.1 L D- 2.5
Rectangular shape 600x450 mm internal dimensions No 2.00 1255.25 2510.50
Supplying and fixing C.I. cover 300x300 mm without frame for
43 gully trap (standard pattern) the weight of cover to be not less
Making connection of drain or sewer line with existing manhole
including breaking into and making good the walls, floors with
cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded
44 stone aggregate 20 mm nominal size) cement plastered on both
sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished
with a floating coat of neat cement and making necessary
channels for the drain etc. complete :
For pipes 100 to 250 mm diameter No 1.00 683.70 683.70
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
Sl No Item Unit Quanity Rate in Rs. Amount in Rs.
Dismantling of manhole including R.C.C. top slab, C.I. cover with
frame, including stacking of useful materials near the site and
disposal of unserviceable materials within 50 m lead as per
direction of Engineer-in-charge:
Rectangular manhole 90x80 cm and 45 cm deep No 1.00 2096.10 2096.10
Rectangular manhole 120x90 cm and 90 cm deep
46 Extra for depth of manholes dismantled :
Rectangular manhole 90x80 cm and beyond 45 cm depth
Rectangular manhole 120x90 cm and beyond 90 cm depth
Constructing brick masonry road gully chamber 50x45x60 cm with
bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including
500x450 mm pre-cast R.C.C. horizontal grating with frame
complete as per standard design :
With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5
Constructing brick masonry road gully chamber 45x45x77.5 cm
with bricks in cement mortar 1:4 (1 cement : 4 coarse sand ) with
48 precast R.C.C. vertical grating complete as per standard design : No 3.00 6258.20 18774.60
19.28.1 With common burnt clay F.P.S. (non modular) bricks of
class designation 7.5
Constructing brick masonry chamber for underground C.I.
inspection chamber and bends with bricks in cement mortar 1:4 (1
cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610
mm internal dimensions, total weight of cover with frame to be not
less than 38 kg (weight of cover 23 kg and weight of frame 15 kg),
R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3
graded stone aggregate 20 mm nominal size), foundation
concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone
aggregate 40 mm nominal size), inside plastering 12 mm thick
with cement mortar 1:3 (1 cement : 3 coarse sand), finished
smooth with a floating coat of neat cement on walls and bed
concrete etc. complete as per standard design:
Inside dimensions 500x700 mm and 45 cm deep for pipe line with
one or two inlets :
With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5
Inside dimensions 600x 850 mm and 45 cm deep for pipe line with
three or more inlets :
With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5
50 Extra for depth beyond 45 cm of brick masonry chamber :
2 For 500x700 mm size 19.31.2.1 With common burnt clay F.P.S.
(non modular) bricks of class designation 7.5
For 600x850 mm size 19.31.3.1 With common burnt clay F.P.S.
(non modular) bricks of class designation 7.5
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm
51 dry brick honey comb shaft with bricks and S.W. drain pipe 100
mm diameter, 1.8 m long complete as per standard design.
With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5
Constructing soak pit 1.20x1.20x1.20 m filled with brickbats
52 including S.W. drain pipe 100 mm diameter and 1.20 m long
complete as per standard design
Supplying all materials,labour,T&P and fitting and fixing U-PVC
SWR soil waste ventilating pipes and fittings of the following
outside diameter conforming to ISI No.13592/1992 to walls with
nails,bobbins and wooden plugs or laying in trenches including
53 jointing with supply of approved rubber lubricant by non-heat
application method/as per manufacturer's
specification,testing,earthwork in excavation in all kinds of soil
and refilling of trenches as per specification and direction of
Engineer-in-charge
110mm dia. U-PVC SWR pipes(Supreme/Ashirvad make Type-A) mtr 20.00 456.90 9138.00
75mm dia. U-PVC SWR pipes(Supreme/Ashirvad make Type-A) mtr 8.00 302.20 2417.60
110mm dia. U-PVC door bend each 4.00 293.60 1174.40
110mm dia. U-PVC plain bend each 4.00 232.00 928.00
110mm dia. U-PVC plain tee each 4.00 322.70 1290.80
110mm dia. U-PVC door tee each 4.00 386.00 1544.00
110mm dia. U-PVC "P" trap each 4.00 497.30 1989.20
110mm dia. U-PVC plain shoe bend each 4.00 232.00 928.00
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
Sl No Item Unit Quanity Rate in Rs. Amount in Rs.
110mm dia. U-PVC offset without ear each 4.00 407.40 1629.60
110mm dia. U-PVC vent cowl each 4.00 58.20 232.80
110mm dia. U-PVC socket plain each 4.00 160.10 640.40
75mm dia. U-PVC door bend each 4.00 184.00 736.00
75mm dia. U-PVC plain bend each 4.00 225.10 900.40
Dismantling tile work in floors and roofs laid in cement mortar
including stacking material within 50 metres lead.
For thickness of tiles 10 mm to 25 mm sqm 40.00 60.50 2420.00
Supplying all materials,labour,T&P and laying in trenches ( to
level or slope ) unplasticized PVC pipe conforming to
IS:4985/2000 of the following outside dia for class-3 (0.60mpa)
including jointing with supply of approved solvent cement by non-
heat application method/ as per manufactures's providing and
laying in trench cement concrete(1:4:8) with 40 mm size hard
granite metal in the Type-C-1 standard bedding surrounding or
encasing including concrete for bedding and curing etc all
complete as per PH specification and direction of the Engineer-in-
110mm dia U-PVC pipe ( Allround concrete ) mtr 15.00 982.50 14737.50
160mm dia U-PVC pipe ( Allround concrete ) mtr 10.00 1608.50 16085.00
Supplying fitting and fixing 30mm thick Solid panel PVC door
shutter consisting of frame made out of MS tube of 19 gauge
thickness and size of 19mmx19mm for stile & 15mmx15mm for
top and bolt rails set with PVC door frame(Choukatha)of size
50mmx47mm is made out of 5cm thick sheet properly joined with
solvent cement adhesive as per section view with MS square tube
of 19mm of 19mm gauge to be inserted inside to give extra
structural strength the price is inclusive of all cost of all materials
labour,T&P etc.complete in all respect as per direction of the
Engineer-in-charge.
Providing and laying Ceramic glazed floor tiles of size 300x300
mm (thickness to be specified by the manufacturer) of 1st quality
conforming to IS : 15622 of approved make in colours such as
57 White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement sqm 25.00 935.60 23390.00
mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement
slurry @ 3.3 kg/sqm including pointing the joints with white
cement and matching pigment etc., complete
Providing and fixing Ist quality ceramic glazed wall tiles
conforming to IS: 15622 (thickness to be specified by the
manufacturer), of approved make, in all colours, shades except
burgundy, bottle green, black of any size as approved by Engineer-
in-Charge, in skirting, risers of steps and dados, over 12 mm thick
bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing
with grey cement slurry @ 3.3kg per sqm, including pointing in
white cement mixed with pigment of matching shade complete.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
Department of Women's Studies
Sl No Item Unit Quanity Rate in Rs. Amount in Rs.
Dismantling G.I. pipes (external work) including
excavation and refilling trenches after taking out
1 the pipes, manually/ by mechanical means
including stacking of pipes within 50 metres lead
as per direction of Engineer-in-charge
15 mm to 40 mm nominal bore Rm 12.00 142.10 1705.20
Dismantling aluminium/ Gypsum partitions, doors,
windows, fixed glazing and false ceiling including
2 disposal of unserviceable material and stacking of Sqm 6.00 46.50 279.00
serviceable material with in 50 meters lead as
directed by Engineer-in-charge.
Providing and fixing white vitreous china flat back
or wall corner type lipped front urinal basin of
430x260x350 mm and 340x410x265 mm sizes
respectively with automatic flushing cistern with
3 standard flush pipe and C.P. brass spreaders with
brass unions and G.I clamps complete, including
painting of fittings and brackets, cutting and
making good the walls and floors wherever
One urinal basin with 5 litre white P.V.C. automatic
flushing cistern
Providing and fixing white vitreous china flat back
half stall urinal of size 580x380x350 mm with white
PVC automatic flushing cistern, with fittings,
standard size C.P. brass flush pipe, spreaders
with unions and clamps (all in C.P. brass) with
waste fitting as per IS : 2556, C.I. trap with outlet
grating and other couplings in C.P. brass,
including painting of fittings and cutting and
making good the walls and floors wherever
Single half stall urinal with 5 litre P.V.C. automatic
flushing cistern
Providing and fixing one piece construction white
vitreous china squatting plate with an integral
longitudinal flushing pipe, white P.V.C. automatic
flushing cistern, with fittings, standard size G.I. /
5 PVC flush pipe for back and front flush with
standard spreader pipes with fittings, G.I clamps
and C.P. brass coupling complete, including
painting of fittings and cutting and making good
the walls and floors etc. wherever required :
Single squatting plate with 5 litre P.V.C. automatic
flushing cistern
Providing and fixing wash basin with C.I. brackets,
15 mm C.P. brass pillar taps, 32 mm C.P. brass
6 waste of standard pattern, including painting of
fittings and brackets, cutting and making good the
walls wherever required:
White Vitreous China Wash basin size 550x400
mm with a pair of 15 mm C.P. brass pillar taps
Providing and fixing white vitreous china water
closet squatting pan (Indian type) :
Orissa pattern W.C. pan of size 580x440 mm No 2.00 2758.20 5516.40
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
Sl No Item Unit Quanity Rate in Rs. Amount in Rs.
Providing and fixing P.V.C. low level flushing
cistern with manually controlled device (handle
lever) conforming to IS : 7231, with all fittings and
fixtures complete:
10 litre capacity - White No 2.00 1023.05 2046.10
Providing and fixing controlled flush, low level
9 cistern made of vitreous china with all fittings
10 litre (full flush) capacity-white
Providing and fixing white vitreous china squatting
plate urinal with integral rim longitudinal flush pipe:
Providing and fixing white vitreous china wash
11 basin including making all connections but
excluding the cost of fittings :
Flat back wash basin of size 550x400 mm No 2.00 915.45 1830.90
Providing and fixing P.V.C. waste pipe for sink or
12 wash basin including P.V.C. waste fittings
Flexible pipe 17.28.2.1 32 mm dia.: No 2.00 104.35 208.70
Providing and fixing 600x450 mm beveled edge
mirror of superior glass (of approved quality)
13 complete with 6 mm thick hard board ground fixed No 2.00 1411.15 2822.30
to wooden cleats with C.P. brass screws and
washers complete.
Providing and fixing soil, waste and vent pipes :
Sand cast iron S&S pipe as per IS: 1729
Providing and filling the joints with spun yarn,
15 cement slurry and cement mortar 1:2 ( 1 cement :
2 fine sand) in S.C.I./ C.I. Pipes :
100 mm dia pipe
Providing and fixing M.S. holder-bat clamps of
approved design to Sand Cast iron/cast iron
(spun) pipe embedded in and including cement
16 concrete blocks 10x10x10 cm of 1:2:4 mix (1
cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size), including cost of
cutting holes and making good the walls etc. :
For 100 mm dia pipe
Providing and fixing bend of required degree with
access door, insertion rubber washer 3 mm thick,
bolts and nuts complete. 17.38.1 100 mm dia
17.38.1.1 Sand cast iron S&S as per IS - 1729
Providing and fixing plain bend of required degree.
Sand cast iron S&S as per IS - 1729
Providing and fixing heel rest sanitary bend
Sand cast iron S&S as per IS - 1729
Providing and fixing single equal plain junction of
required degree with access door, insertion rubber
washer 3 mm thick, bolts and nuts complete.
Sand cast iron S&S as per IS - 1729
Providing and fixing single equal plain junction of
required degree : 17.44.1 100x100x100 mm:
Sand cast iron S&S as per IS - 1729
Providing and fixing sand cast iron S&S off sets
as per IS: 1729 17.53.1 76 mm off sets
With 100 mm dia pipe
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
Sl No Item Unit Quanity Rate in Rs. Amount in Rs.
Providing lead caulked joints to sand cast
23 iron/centrifugally cast (spun) iron pipes and fittings
Providing and fixing trap of self cleansing design
with screwed down or hinged grating with or
without vent arm complete, including cost of
cutting and making good the walls and floors :
100 mm inlet and 100 mm outlet
Sand cast iron S&S as per IS: 3989
Painting sand cast iron/ centrifugally cast (spun)
iron soil, waste vent pipes and fittings with two
25 coats of synthetic enamel paint of any colour such
as chocolate grey, or buff etc. over a coat of
primer (of approved quality) for new work :
100 mm diameter pipe
Providing and fixing Chlorinated Polyvinyl Chloride
(CPVC) pipes, having thermal stability for hot &
cold water supply, including all CPVC plain &
brass threaded fittings, i/c fixing the pipe with
clamps at 1.00 m spacing. This includes jointing of
26 pipes & fittings with one step CPVC solvent
cement and the cost of cutting chases and making
good the same including testing of joints complete
as per direction of Engineer in Charge. Concealed
work, including cutting chases and making good
20 mm nominal dia Pipes Rm 5.00 513.75 2568.75
25 mm nominal dia Pipes Rm 5.00 626.05 3130.25
32 mm nominal dia Pipes Rm 2.00 712.75 1425.50
Providing and fixing gun metal gate valve with C.I.
wheel of approved quality (screwed end) :
32 mm nominal bore. No 1.00 589.90 589.90
40 mm nominal bore No 1.00 707.30 707.30
Providing and fixing ball valve (brass) of approved
28 quality, High or low pressure, with plastic floats
25 mm nominal bore No 1.00 399.15 399.15
Providing lead caulked joints to spun iron or C.I.
29 pipes and specials, including testing of joints but
excluding the cost of pig lead :
100 mm diameter pipe
30 Supplying pig lead at site of work.
Providing and fixing C.P. brass bib cock of
approved quality conforming to IS:8931 :
15 mm nominal bore No 2.00 434.20 868.40
Providing and fixing C.P. brass long body bib cock
32 of approved quality conforming to IS standards
and weighing not less than 690 gms.
15 mm nominal bore each No 2.00 708.40 1416.80
Providing and fixing C.P. brass stop cock
33 (concealed) of standard design and of approved
make conforming to IS:8931.
15 mm nominal bore each
Providing and fixing C.P. brass angle valve for
34 basin mixer and geyser points of approved quality
conforming to IS:8931
15mm nominal bore No 2.00 500.35 1000.70
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
Sl No Item Unit Quanity Rate in Rs. Amount in Rs.
Providing and fixing C.P. Brass extension nipple
35 (size 15mmx50mm) of approved make and quality No 2.00 61.70 123.40
as per direction of Engineer-in-charge.
Cutting holes up to 15x15 cm in R.C.C. floors and
roofs for passing drain pipe etc. and repairing the
hole after insertion of drain pipe etc. with cement
1:2:4 (1 cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size), including finishing No 3.00 377.10 1131.30
complete so as to make it leak proof
Making chases up to 7.5x7.5 cm in walls including
37 making good and finishing with matching surface Rm 2.00 171.80 343.60
after housing G.I. pipe etc.
Making hole up to 20x20 cm and embedding
38 pipes up to 150 mm diameter in masonry and
filling with cement concrete
1:3:6 (1 cement : 3 coarse sand: 6 graded stone
aggregate 20 mm nominal size) including disposal Rm 3.00 198.40 595.20
Dismantling old C.I. pipes including excavation
and refilling trenches after taking out the pipes,
39 breaking lead caulked joints, melting of lead and
making into blocks, including stacking of pipes at
site lead up to 50 metre:
100 mm diameter C.I. pipe Rm 3.00 340.80 1022.40
Constructing brick masonry manhole in cement
mortar 1:4 ( 1 cement : 4 coarse sand ) with
R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5
coarse sand (zone-III) : 3 graded stone aggregate
20 mm nominal size), foundation concrete 1:4:8
mix (1 cement : 4 coarse sand (zone-III) : 8 graded
stone aggregate 40 mm nominal size), inside
plastering 12 mm thick with cement mortar 1:3 (1
cement : 3 coarse sand) finished with floating coat
of neat cement and making channels in cement
concrete 1:2:4 (1 cement : 2 coarse sand : 4
graded stone aggregate 20 mm nominal size)
finished with a floating coat of neat cement
complete as per standard design :
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
Sl No Item Unit Quanity Rate in Rs. Amount in Rs.
Inside size 90x80 cm and 45 cm deep including
C.I. cover with frame (light duty) 455x610 mm
internal dimensions, total weight of cover and
frame to be not less than 38 kg (weight of cover
23 kg and weight of frame 15 kg) :
With common burnt clay F.P.S. (non modular)
bricks of class designation 7.5
Inside size 120x90 cm and 90 cm deep including
C.I. cover with frame (medium duty) 500 mm
internal diameter, total weight of cover and frame
to be not less than 116 kg (weight of cover 58 kg
and weight of frame 58 kg) :
With common burnt clay F.P.S. (non modular)
bricks of class designation 7.5
41 Extra for depth for manholes :
With common burnt clay F.P.S. (non modular)
bricks of class designation 7.5
With common burnt clay F.P.S. (non modular)
bricks of class designation 7.5
Providing and fixing in position pre-cast R.C.C.
42 manhole cover and frame of required shape and
approved quality 19.19.1 L D- 2.5
Rectangular shape 600x450 mm internal
Supplying and fixing C.I. cover 300x300 mm
43 without frame for gully trap (standard pattern) the
weight of cover to be not less than 4.5 kg
Making connection of drain or sewer line with
existing manhole including breaking into and
making good the walls, floors with cement
concrete 1:2:4 mix (1 cement : 2 coarse sand : 4
44 graded stone aggregate 20 mm nominal size)
cement plastered on both sides with cement
mortar 1:3 (1 cement : 3 coarse sand), finished
with a floating coat of neat cement and making
necessary channels for the drain etc. complete :
For pipes 100 to 250 mm diameter No 1.00 683.70 683.70
Dismantling of manhole including R.C.C. top slab,
C.I. cover with frame, including stacking of useful
45 materials near the site and disposal of
unserviceable materials within 50 m lead as per
direction of Engineer-in-charge:
Rectangular manhole 90x80 cm and 45 cm deep No 1.00 2096.10 2096.10
Rectangular manhole 120x90 cm and 90 cm deep
46 Extra for depth of manholes dismantled :
Rectangular manhole 90x80 cm and beyond 45
Rectangular manhole 120x90 cm and beyond 90
Constructing brick masonry road gully chamber
50x45x60 cm with bricks in cement mortar 1:4 (1
47 cement : 4 coarse sand) including 500x450 mm
pre-cast R.C.C. horizontal grating with frame
complete as per standard design :
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
Sl No Item Unit Quanity Rate in Rs. Amount in Rs.
With common burnt clay F.P.S. (non modular)
bricks of class designation 7.5
Constructing brick masonry road gully chamber
45x45x77.5 cm with bricks in cement mortar 1:4 (1
cement : 4 coarse sand ) with precast R.C.C.
vertical grating complete as per standard design :
19.28.1 With common burnt clay F.P.S. (non
modular) bricks of class designation 7.5
Constructing brick masonry chamber for
underground C.I. inspection chamber and bends
with bricks in cement mortar 1:4 (1 cement : 4
coarse sand) C.I. cover with frame (light duty)
455x610 mm internal dimensions, total weight of
cover with frame to be not less than 38 kg (weight
of cover 23 kg and weight of frame 15 kg), R.C.C.
top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand
: 3 graded stone aggregate 20 mm nominal size),
foundation concrete 1:5:10 (1 cement : 5 fine sand
: 10 graded stone aggregate 40 mm nominal size),
inside plastering 12 mm thick with cement mortar
1:3 (1 cement : 3 coarse sand), finished smooth
with a floating coat of neat cement on walls and
bed concrete etc. complete as per standard
Inside dimensions 500x700 mm and 45 cm deep
for pipe line with one or two inlets :
With common burnt clay F.P.S. (non modular)
bricks of class designation 7.5
Inside dimensions 600x 850 mm and 45 cm deep
for pipe line with three or more inlets :
With common burnt clay F.P.S. (non modular)
bricks of class designation 7.5
Extra for depth beyond 45 cm of brick masonry
2 For 500x700 mm size 19.31.2.1 With common
burnt clay F.P.S. (non modular) bricks of class
designation 7.5
For 600x850 mm size 19.31.3.1 With common
burnt clay F.P.S. (non modular) bricks of class
designation 7.5
Making soak pit 2.5 m diameter 3.0 metre deep
with 45 x 45 cm dry brick honey comb shaft with
bricks and S.W. drain pipe 100 mm diameter, 1.8
m long complete as per standard design.
With common burnt clay F.P.S. (non modular)
bricks of class designation 7.5
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
Sl No Item Unit Quanity Rate in Rs. Amount in Rs.
Constructing soak pit 1.20x1.20x1.20 m filled with
brickbats including S.W. drain pipe 100 mm
diameter and 1.20 m long complete as per
standard design
Supplying all materials,labour,T&P and fitting and
fixing U-PVC SWR soil waste ventilating pipes
and fittings of the following outside diameter
conforming to ISI No.13592/1992 to walls with
nails,bobbins and wooden plugs or laying in
53 trenches including jointing with supply of approved
rubber lubricant by non-heat application
method/as per manufacturer's
specification,testing,earthwork in excavation in all
kinds of soil and refilling of trenches as per
specification and direction of Engineer-in-charge
110mm dia. U-PVC SWR
pipes(Supreme/Ashirvad make Type-A)
75mm dia. U-PVC SWR pipes(Supreme/Ashirvad
110mm dia. U-PVC door bend each 2.00 293.60 587.20
110mm dia. U-PVC plain bend each 2.00 232.00 464.00
110mm dia. U-PVC plain tee each 2.00 322.70 645.40
110mm dia. U-PVC door tee each 2.00 386.00 772.00
110mm dia. U-PVC "P" trap each 2.00 497.30 994.60
110mm dia. U-PVC plain shoe bend each 2.00 232.00 464.00
110mm dia. U-PVC offset without ear each 2.00 407.40 814.80
110mm dia. U-PVC vent cowl each 2.00 58.20 116.40
110mm dia. U-PVC socket plain each 2.00 160.10 320.20
75mm dia. U-PVC door bend each 2.00 184.00 368.00
75mm dia. U-PVC plain bend each 2.00 225.10 450.20
Dismantling tile work in floors and roofs laid in
54 cement mortar including stacking material within
50 metres lead.
For thickness of tiles 10 mm to 25 mm sqm 7.00 60.50 423.50
Supplying all materials,labour,T&P and laying in
trenches ( to level or slope ) unplasticized PVC
pipe conforming to IS:4985/2000 of the following
outside dia for class-3 (0.60mpa) including jointing
with supply of approved solvent cement by non-
heat application method/ as per manufactures's
55 providing and laying in trench cement
concrete(1:4:8) with 40 mm size hard granite
metal in the Type-C-1 standard bedding
surrounding or encasing including concrete for
bedding and curing etc all complete as per PH
specification and direction of the Engineer-in-
110mm dia U-PVC pipe ( Allround concrete ) mtr 5.00 982.50 4912.50
160mm dia U-PVC pipe ( Allround concrete ) mtr 5.00 1608.50 8042.50
Supplying fitting and fixing 30mm thick Solid panel
PVC door shutter consisting of frame made out of
MS tube of 19 gauge thickness and size of
19mmx19mm for stile & 15mmx15mm for top and
bolt rails set with PVC door frame(Choukatha)of
size 50mmx47mm is made out of 5cm thick sheet
properly joined with solvent cement adhesive as
per section view with MS square tube of 19mm of
19mm gauge to be inserted inside to give extra
structural strength the price is inclusive of all cost
of all materials labour,T&P etc.complete in all
respect as per direction of the Engineer-in-charge.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
Sl No Item Unit Quanity Rate in Rs. Amount in Rs.
Providing and laying Ceramic glazed floor tiles of
size 300x300 mm (thickness to be specified by the
manufacturer) of 1st quality conforming to IS :
15622 of approved make in colours such as
57 White, Ivory, Grey, Fume Red Brown, laid on 20 sqm 5.00 935.60 4678.00
mm thick cement mortar 1:4 (1 Cement : 4 Coarse
sand), Jointing with grey cement slurry @ 3.3
kg/sqm including pointing the joints with white
cement and matching pigment etc., complete
Providing and fixing Ist quality ceramic glazed wall
tiles conforming to IS: 15622 (thickness to be
specified by the manufacturer), of approved make,
in all colours, shades except burgundy, bottle
green, black of any size as approved by Engineer-
58 in-Charge, in skirting, risers of steps and dados, sqm 2.00 1063.45 2126.90
over 12 mm thick bed of cement mortar 1:3 (1
cement : 3 coarse sand) and jointing with grey
cement slurry @ 3.3kg per sqm, including pointing
in white cement mixed with pigment of matching
shade complete.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
PG Department of English & Odiya
Sl Rate in Amount in
Item Unit Quanity
Dismantling G.I. pipes (external work) including excavation
and refilling trenches after taking out the pipes, manually/ by
mechanical means including stacking of pipes within 50
metres lead as per direction of Engineer-in-charge
15 mm to 40 mm nominal bore Rm 25.00 142.10 3552.50
Dismantling aluminium/ Gypsum partitions, doors, windows,
fixed glazing and false ceiling including disposal of
unserviceable material and stacking of serviceable material
with in 50 meters lead as directed by Engineer-in-charge.
Providing and fixing white vitreous china flat back or wall
corner type lipped front urinal basin of 430x260x350 mm and
340x410x265 mm sizes respectively with automatic flushing
3 cistern with standard flush pipe and C.P. brass spreaders with
brass unions and G.I clamps complete, including painting of
fittings and brackets, cutting and making good the walls and
floors wherever required :
One urinal basin with 5 litre white P.V.C. automatic flushing
Providing and fixing white vitreous china flat back half stall
urinal of size 580x380x350 mm with white PVC automatic
flushing cistern, with fittings, standard size C.P. brass flush
pipe, spreaders with unions and clamps (all in C.P. brass)
with waste fitting as per IS : 2556, C.I. trap with outlet grating
and other couplings in C.P. brass, including painting of fittings
and cutting and making good the walls and floors wherever
Single half stall urinal with 5 litre P.V.C. automatic flushing
Providing and fixing one piece construction white vitreous
china squatting plate with an integral longitudinal flushing
pipe, white P.V.C. automatic flushing cistern, with fittings,
standard size G.I. / PVC flush pipe for back and front flush
with standard spreader pipes with fittings, G.I clamps and
C.P. brass coupling complete, including painting of fittings
and cutting and making good the walls and floors etc.
wherever required :
Single squatting plate with 5 litre P.V.C. automatic flushing
Providing and fixing wash basin with C.I. brackets, 15 mm
C.P. brass pillar taps, 32 mm C.P. brass waste of standard
pattern, including painting of fittings and brackets, cutting and
making good the walls wherever required:
White Vitreous China Wash basin size 550x400 mm with a
pair of 15 mm C.P. brass pillar taps
Providing and fixing white vitreous china water closet
squatting pan (Indian type) :
Orissa pattern W.C. pan of size 580x440 mm No 2.00 2758.20 5516.40
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
Sl Rate in Amount in
Item Unit Quanity
Providing and fixing P.V.C. low level flushing cistern with
8 manually controlled device (handle lever) conforming to IS :
7231, with all fittings and fixtures complete:
10 litre capacity - White No 2.00 1023.05 2046.10
Providing and fixing controlled flush, low level cistern made of
vitreous china with all fittings complete:
10 litre (full flush) capacity-white
Providing and fixing white vitreous china squatting plate
urinal with integral rim longitudinal flush pipe:
Providing and fixing white vitreous china wash basin including
making all connections but excluding the cost of fittings :
Flat back wash basin of size 550x400 mm No 2.00 915.45 1830.90
Providing and fixing P.V.C. waste pipe for sink or wash basin
including P.V.C. waste fittings complete.
Flexible pipe 17.28.2.1 32 mm dia.: No 2.00 104.35 208.70
Providing and fixing 600x450 mm beveled edge mirror of
superior glass (of approved quality) complete with 6 mm thick
hard board ground fixed to wooden cleats with C.P. brass
screws and washers complete.
Providing and fixing soil, waste and vent pipes : 17.35.1 100
Sand cast iron S&S pipe as per IS: 1729
Providing and filling the joints with spun yarn, cement slurry
15 and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I.
100 mm dia pipe
Providing and fixing M.S. holder-bat clamps of approved
design to Sand Cast iron/cast iron (spun) pipe embedded in
and including cement concrete blocks 10x10x10 cm of 1:2:4
mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20
mm nominal size), including cost of cutting holes and making
good the walls etc. :
For 100 mm dia pipe
Providing and fixing bend of required degree with access
door, insertion rubber washer 3 mm thick, bolts and nuts
complete. 17.38.1 100 mm dia 17.38.1.1 Sand cast iron S&S
as per IS - 1729
Providing and fixing plain bend of required degree. 17.39.1
Sand cast iron S&S as per IS - 1729
Providing and fixing heel rest sanitary bend 17.40.1 100 mm
Sand cast iron S&S as per IS - 1729
Providing and fixing single equal plain junction of required
20 degree with access door, insertion rubber washer 3 mm thick,
bolts and nuts complete. 17.43.1 100x100x100 mm:
Sand cast iron S&S as per IS - 1729
Providing and fixing single equal plain junction of required
degree : 17.44.1 100x100x100 mm:
Sand cast iron S&S as per IS - 1729
Providing and fixing sand cast iron S&S off sets as per IS:
1729 17.53.1 76 mm off sets
With 100 mm dia pipe
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
Sl Rate in Amount in
Item Unit Quanity
Providing lead caulked joints to sand cast iron/centrifugally
cast (spun) iron pipes and fittings of diameter :
Providing and fixing trap of self cleansing design with
screwed down or hinged grating with or without vent arm
complete, including cost of cutting and making good the walls
100 mm inlet and 100 mm outlet
Sand cast iron S&S as per IS: 3989
Painting sand cast iron/ centrifugally cast (spun) iron soil,
waste vent pipes and fittings with two coats of synthetic
enamel paint of any colour such as chocolate grey, or buff
etc. over a coat of primer (of approved quality) for new work :
100 mm diameter pipe
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)
pipes, having thermal stability for hot & cold water supply,
including all CPVC plain & brass threaded fittings, i/c fixing
the pipe with clamps at 1.00 m spacing. This includes jointing
26 of pipes & fittings with one step CPVC solvent cement and the
cost of cutting chases and making good the same including
testing of joints complete as per direction of Engineer in
Charge. Concealed work, including cutting chases and
making good the walls etc.
20 mm nominal dia Pipes Rm 10.00 513.75 5137.50
25 mm nominal dia Pipes Rm 10.00 626.05 6260.50
32 mm nominal dia Pipes Rm 5.00 712.75 3563.75
Providing and fixing gun metal gate valve with C.I. wheel of
approved quality (screwed end) :
32 mm nominal bore. No 1.00 589.90 589.90
40 mm nominal bore No 1.00 707.30 707.30
Providing and fixing ball valve (brass) of approved quality,
High or low pressure, with plastic floats complete :
25 mm nominal bore No 1.00 399.15 399.15
Providing lead caulked joints to spun iron or C.I. pipes and
29 specials, including testing of joints but excluding the cost of
100 mm diameter pipe
30 Supplying pig lead at site of work.
Providing and fixing C.P. brass bib cock of approved quality
conforming to IS:8931 :
15 mm nominal bore No 2.00 434.20 868.40
Providing and fixing C.P. brass long body bib cock of
32 approved quality conforming to IS standards and weighing not
less than 690 gms.
15 mm nominal bore each No 2.00 708.40 1416.80
Providing and fixing C.P. brass stop cock (concealed) of
standard design and of approved make conforming to IS:8931.
15 mm nominal bore each
Providing and fixing C.P. brass angle valve for basin mixer
and geyser points of approved quality conforming to IS:8931
15mm nominal bore No 2.00 500.35 1000.70
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
Sl Rate in Amount in
Item Unit Quanity
Providing and fixing C.P. Brass extension nipple (size
35 15mmx50mm) of approved make and quality as per direction No 2.00 61.70 123.40
of Engineer-in-charge.
Cutting holes up to 15x15 cm in R.C.C. floors and roofs for
36 passing drain pipe etc. and repairing the hole after insertion of
drain pipe etc. with cement concrete
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate
20 mm nominal size), including finishing complete so as to No 3.00 377.10 1131.30
make it leak proof
Making chases up to 7.5x7.5 cm in walls including making
37 good and finishing with matching surface after housing G.I. Rm 2.00 171.80 343.60
Making hole up to 20x20 cm and embedding pipes up to 150
mm diameter in masonry and filling with cement concrete
1:3:6 (1 cement : 3 coarse sand: 6 graded stone aggregate
20 mm nominal size) including disposal of malba
Dismantling old C.I. pipes including excavation and refilling
trenches after taking out the pipes, breaking lead caulked
joints, melting of lead and making into blocks, including
stacking of pipes at site lead up to 50 metre:
100 mm diameter C.I. pipe Rm 3.00 340.80 1022.40
Constructing brick masonry manhole in cement mortar 1:4 ( 1
cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix
(1 cement : 1.5 coarse sand (zone-III) : 3 graded stone
aggregate 20 mm nominal size), foundation concrete 1:4:8
mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone
aggregate 40 mm nominal size), inside plastering 12 mm
thick with cement mortar 1:3 (1 cement : 3 coarse sand)
finished with floating coat of neat cement and making
channels in cement concrete 1:2:4 (1 cement : 2 coarse sand
: 4 graded stone aggregate 20 mm nominal size) finished with
a floating coat of neat cement complete as per standard
Inside size 90x80 cm and 45 cm deep including C.I. cover
with frame (light duty) 455x610 mm internal dimensions, total
weight of cover and frame to be not less than 38 kg (weight of
cover 23 kg and weight of frame 15 kg) :
With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5
Inside size 120x90 cm and 90 cm deep including C.I. cover
with frame (medium duty) 500 mm internal diameter, total
weight of cover and frame to be not less than 116 kg (weight
of cover 58 kg and weight of frame 58 kg) :
With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5
41 Extra for depth for manholes :
With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
Sl Rate in Amount in
Item Unit Quanity
With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5
Providing and fixing in position pre-cast R.C.C. manhole
42 cover and frame of required shape and approved quality
Rectangular shape 600x450 mm internal dimensions No 1.00 1255.25 1255.25
Supplying and fixing C.I. cover 300x300 mm without frame for
43 gully trap (standard pattern) the weight of cover to be not less
Making connection of drain or sewer line with existing
manhole including breaking into and making good the walls,
floors with cement concrete 1:2:4 mix (1 cement : 2 coarse
sand : 4 graded stone aggregate 20 mm nominal size)
cement plastered on both sides with cement mortar 1:3 (1
cement : 3 coarse sand), finished with a floating coat of neat
cement and making necessary channels for the drain etc.
For pipes 100 to 250 mm diameter No 1.00 683.70 683.70
Dismantling of manhole including R.C.C. top slab, C.I. cover
with frame, including stacking of useful materials near the site
and disposal of unserviceable materials within 50 m lead as
per direction of Engineer-in-charge:
Rectangular manhole 90x80 cm and 45 cm deep No 1.00 2096.10 2096.10
Rectangular manhole 120x90 cm and 90 cm deep
46 Extra for depth of manholes dismantled :
Rectangular manhole 90x80 cm and beyond 45 cm depth
Rectangular manhole 120x90 cm and beyond 90 cm depth
Constructing brick masonry road gully chamber 50x45x60 cm
with bricks in cement mortar 1:4 (1 cement : 4 coarse sand)
including 500x450 mm pre-cast R.C.C. horizontal grating with
frame complete as per standard design :
With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5
Constructing brick masonry road gully chamber 45x45x77.5
cm with bricks in cement mortar 1:4 (1 cement : 4 coarse
48 sand ) with precast R.C.C. vertical grating complete as per No 1.00 6258.20 6258.20
standard design : 19.28.1 With common burnt clay F.P.S.
(non modular) bricks of class designation 7.5
Constructing brick masonry chamber for underground C.I.
inspection chamber and bends with bricks in cement mortar
1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light
duty) 455x610 mm internal dimensions, total weight of cover
with frame to be not less than 38 kg (weight of cover 23 kg
and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix
49 (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm
nominal size), foundation concrete 1:5:10 (1 cement : 5 fine
sand : 10 graded stone aggregate 40 mm nominal size),
inside plastering 12 mm thick with cement mortar 1:3 (1
cement : 3 coarse sand), finished smooth with a floating coat
of neat cement on walls and bed concrete etc. complete as
per standard design:
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
Sl Rate in Amount in
Item Unit Quanity
Inside dimensions 500x700 mm and 45 cm deep for pipe line
with one or two inlets :
With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5
Inside dimensions 600x 850 mm and 45 cm deep for pipe line
with three or more inlets :
With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5
50 Extra for depth beyond 45 cm of brick masonry chamber :
2 For 500x700 mm size 19.31.2.1 With common burnt clay
F.P.S. (non modular) bricks of class designation 7.5
For 600x850 mm size 19.31.3.1 With common burnt clay
F.P.S. (non modular) bricks of class designation 7.5
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45
cm dry brick honey comb shaft with bricks and S.W. drain
pipe 100 mm diameter, 1.8 m long complete as per standard
With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5
Constructing soak pit 1.20x1.20x1.20 m filled with brickbats
52 including S.W. drain pipe 100 mm diameter and 1.20 m long
complete as per standard design
Supplying all materials,labour,T&P and fitting and fixing U-
PVC SWR soil waste ventilating pipes and fittings of the
following outside diameter conforming to ISI No.13592/1992
to walls with nails,bobbins and wooden plugs or laying in
53 trenches including jointing with supply of approved rubber
lubricant by non-heat application method/as per
manufacturer's specification,testing,earthwork in excavation in
all kinds of soil and refilling of trenches as per specification
and direction of Engineer-in-charge
110mm dia. U-PVC SWR pipes(Supreme/Ashirvad make
75mm dia. U-PVC SWR pipes(Supreme/Ashirvad make Type-
110mm dia. U-PVC door bend each 4.00 293.60 1174.40
110mm dia. U-PVC plain bend each 4.00 232.00 928.00
110mm dia. U-PVC plain tee each 4.00 322.70 1290.80
110mm dia. U-PVC door tee each 4.00 386.00 1544.00
110mm dia. U-PVC "P" trap each 4.00 497.30 1989.20
110mm dia. U-PVC plain shoe bend each 4.00 232.00 928.00
110mm dia. U-PVC offset without ear each 4.00 407.40 1629.60
110mm dia. U-PVC vent cowl each 4.00 58.20 232.80
110mm dia. U-PVC socket plain each 4.00 160.10 640.40
75mm dia. U-PVC door bend each 4.00 184.00 736.00
75mm dia. U-PVC plain bend each 4.00 225.10 900.40
Dismantling tile work in floors and roofs laid in cement mortar
including stacking material within 50 metres lead.
For thickness of tiles 10 mm to 25 mm sqm 12.00 60.50 726.00
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
Sl Rate in Amount in
Item Unit Quanity
Supplying all materials,labour,T&P and laying in trenches ( to
level or slope ) unplasticized PVC pipe conforming to
IS:4985/2000 of the following outside dia for class-3
(0.60mpa) including jointing with supply of approved solvent
cement by non-heat application method/ as per
manufactures's providing and laying in trench cement
concrete(1:4:8) with 40 mm size hard granite metal in the
Type-C-1 standard bedding surrounding or encasing including
concrete for bedding and curing etc all complete as per PH
specification and direction of the Engineer-in-charge.
110mm dia U-PVC pipe ( Allround concrete ) mtr 10.00 982.50 9825.00
160mm dia U-PVC pipe ( Allround concrete ) mtr 10.00 1608.50 16085.00
Supplying fitting and fixing 30mm thick Solid panel PVC door
shutter consisting of frame made out of MS tube of 19 gauge
thickness and size of 19mmx19mm for stile & 15mmx15mm
for top and bolt rails set with PVC door frame(Choukatha)of
size 50mmx47mm is made out of 5cm thick sheet properly
joined with solvent cement adhesive as per section view with
MS square tube of 19mm of 19mm gauge to be inserted
inside to give extra structural strength the price is inclusive of
all cost of all materials labour,T&P etc.complete in all respect
as per direction of the Engineer-in-charge.
Providing and laying Ceramic glazed floor tiles of size
300x300 mm (thickness to be specified by the manufacturer)
of 1st quality conforming to IS : 15622 of approved make in
colours such as White, Ivory, Grey, Fume Red Brown, laid on
20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand),
Jointing with grey cement slurry @ 3.3 kg/sqm including
pointing the joints with white cement and matching pigment
Providing and fixing Ist quality ceramic glazed wall tiles
conforming to IS: 15622 (thickness to be specified by the
manufacturer), of approved make, in all colours, shades
except burgundy, bottle green, black of any size as approved
58 by Engineer-in-Charge, in skirting, risers of steps and dados, sqm 4.00 1063.45 4253.80
over 12 mm thick bed of cement mortar 1:3 (1 cement : 3
coarse sand) and jointing with grey cement slurry @ 3.3kg per
sqm, including pointing in white cement mixed with pigment of
matching shade complete.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
Department of MBA
Unit Quanity Rate in Rs. Amount in Rs.
1 Dismantling G.I. pipes (external work) including
excavation and refilling trenches after taking out the
pipes, manually/ by mechanical means including
stacking of pipes within 50 metres lead as per direction
of Engineer-in-charge
15 mm to 40 mm nominal bore Rm 40.00 142.10 5684.00
2 Dismantling aluminium/ Gypsum partitions, doors,
windows, fixed glazing and false ceiling including
disposal of unserviceable material and stacking of Sqm 20.00 46.50 930.00
serviceable material with in 50 meters lead as directed
by Engineer-in-charge.
3 Providing and fixing white vitreous china flat back or
wall corner type lipped front urinal basin of 430x260x350
mm and 340x410x265 mm sizes respectively with
automatic flushing cistern with standard flush pipe and
C.P. brass spreaders with brass unions and G.I clamps
complete, including painting of fittings and brackets,
cutting and making good the walls and floors wherever
One urinal basin with 5 litre white P.V.C. automatic
flushing cistern
4 Providing and fixing white vitreous china flat back half
stall urinal of size 580x380x350 mm with white PVC
automatic flushing cistern, with fittings, standard size
C.P. brass flush pipe, spreaders with unions and clamps
(all in C.P. brass) with waste fitting as per IS : 2556, C.I.
trap with outlet grating and other couplings in C.P.
brass, including painting of fittings and cutting and
making good the walls and floors wherever required :
Single half stall urinal with 5 litre P.V.C. automatic
flushing cistern
5 Providing and fixing one piece construction white
vitreous china squatting plate with an integral
longitudinal flushing pipe, white P.V.C. automatic
flushing cistern, with fittings, standard size G.I. / PVC
flush pipe for back and front flush with standard
spreader pipes with fittings, G.I clamps and C.P. brass
coupling complete, including painting of fittings and
cutting and making good the walls and floors etc.
wherever required :
Single squatting plate with 5 litre P.V.C. automatic
flushing cistern
6 Providing and fixing wash basin with C.I. brackets, 15
mm C.P. brass pillar taps, 32 mm C.P. brass waste of
standard pattern, including painting of fittings and
brackets, cutting and making good the walls wherever
White Vitreous China Wash basin size 550x400 mm
with a pair of 15 mm C.P. brass pillar taps
7 Providing and fixing white vitreous china water closet
squatting pan (Indian type) :
Orissa pattern W.C. pan of size 580x440 mm No 6.00 2758.20 16549.20
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
Unit Quanity Rate in Rs. Amount in Rs.
8 Providing and fixing P.V.C. low level flushing cistern
with manually controlled device (handle lever)
conforming to IS : 7231, with all fittings and fixtures
10 litre capacity - White No 6.00 1023.05 6138.30
9 Providing and fixing controlled flush, low level cistern
made of vitreous china with all fittings complete:
10 litre (full flush) capacity-white
10 Providing and fixing white vitreous china squatting plate
urinal with integral rim longitudinal flush pipe:
11 Providing and fixing white vitreous china wash basin
including making all connections but excluding the cost
Flat back wash basin of size 550x400 mm No 6.00 915.45 5492.70
12 Providing and fixing P.V.C. waste pipe for sink or wash
basin including P.V.C. waste fittings complete.
Flexible pipe 17.28.2.1 32 mm dia.: No 6.00 104.35 626.10
13 Providing and fixing 600x450 mm beveled edge mirror of
superior glass (of approved quality) complete with 6 mm
thick hard board ground fixed to wooden cleats with C.P. No 6.00 1411.15 8466.90
brass screws and washers complete.
14 Providing and fixing soil, waste and vent pipes : 17.35.1
Sand cast iron S&S pipe as per IS: 1729
15 Providing and filling the joints with spun yarn, cement
slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in
S.C.I./ C.I. Pipes :
100 mm dia pipe
16 Providing and fixing M.S. holder-bat clamps of approved
design to Sand Cast iron/cast iron (spun) pipe
embedded in and including cement concrete blocks
10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4
graded stone aggregate 20 mm nominal size), including
cost of cutting holes and making good the walls etc. :
For 100 mm dia pipe
17 Providing and fixing bend of required degree with
access door, insertion rubber washer 3 mm thick, bolts
and nuts complete. 17.38.1 100 mm dia 17.38.1.1 Sand
cast iron S&S as per IS - 1729
18 Providing and fixing plain bend of required degree.
Sand cast iron S&S as per IS - 1729
19 Providing and fixing heel rest sanitary bend 17.40.1 100
Sand cast iron S&S as per IS - 1729
20 Providing and fixing single equal plain junction of
required degree with access door, insertion rubber
washer 3 mm thick, bolts and nuts complete. 17.43.1
Sand cast iron S&S as per IS - 1729
21 Providing and fixing single equal plain junction of
required degree : 17.44.1 100x100x100 mm:
Sand cast iron S&S as per IS - 1729
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
Unit Quanity Rate in Rs. Amount in Rs.
22 Providing and fixing sand cast iron S&S off sets as per
IS: 1729 17.53.1 76 mm off sets
With 100 mm dia pipe
23 Providing lead caulked joints to sand cast
iron/centrifugally cast (spun) iron pipes and fittings of
24 Providing and fixing trap of self cleansing design with
screwed down or hinged grating with or without vent arm
complete, including cost of cutting and making good the
walls and floors :
100 mm inlet and 100 mm outlet
Sand cast iron S&S as per IS: 3989
25 Painting sand cast iron/ centrifugally cast (spun) iron
soil, waste vent pipes and fittings with two coats of
synthetic enamel paint of any colour such as chocolate
grey, or buff etc. over a coat of primer (of approved
quality) for new work :
100 mm diameter pipe
26 Providing and fixing Chlorinated Polyvinyl Chloride
(CPVC) pipes, having thermal stability for hot & cold
water supply, including all CPVC plain & brass threaded
fittings, i/c fixing the pipe with clamps at 1.00 m spacing.
This includes jointing of pipes & fittings with one step
CPVC solvent cement and the cost of cutting chases
and making good the same including testing of joints
complete as per direction of Engineer in Charge.
Concealed work, including cutting chases and making
good the walls etc.
20 mm nominal dia Pipes Rm 60.00 513.75 30825.00
25 mm nominal dia Pipes Rm 60.00 626.05 37563.00
32 mm nominal dia Pipes Rm 40.00 712.75 28510.00
27 Providing and fixing gun metal gate valve with C.I. wheel
of approved quality (screwed end) :
32 mm nominal bore. No 3.00 589.90 1769.70
40 mm nominal bore No 1.00 707.30 707.30
28 Providing and fixing ball valve (brass) of approved
quality, High or low pressure, with plastic floats
25 mm nominal bore No 1.00 399.15 399.15
29 Providing lead caulked joints to spun iron or C.I. pipes
and specials, including testing of joints but excluding the
cost of pig lead :
100 mm diameter pipe
30 Supplying pig lead at site of work.
31 Providing and fixing C.P. brass bib cock of approved
quality conforming to IS:8931 :
15 mm nominal bore No 8.00 434.20 3473.60
32 Providing and fixing C.P. brass long body bib cock of
approved quality conforming to IS standards and
weighing not less than 690 gms.
15 mm nominal bore each No 8.00 708.40 5667.20
33 Providing and fixing C.P. brass stop cock (concealed) of
standard design and of approved make conforming to
15 mm nominal bore each
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
Unit Quanity Rate in Rs. Amount in Rs.
34 Providing and fixing C.P. brass angle valve for basin
mixer and geyser points of approved quality conforming
15mm nominal bore No 10.00 500.35 5003.50
35 Providing and fixing C.P. Brass extension nipple (size
15mmx50mm) of approved make and quality as per No 5.00 61.70 308.50
direction of Engineer-in-charge.
36 Cutting holes up to 15x15 cm in R.C.C. floors and roofs
for passing drain pipe etc. and repairing the hole after
insertion of drain pipe etc. with cement concrete
1:2:4 (1 cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size), including finishing No 10.00 377.10 3771.00
complete so as to make it leak proof
37 Making chases up to 7.5x7.5 cm in walls including
making good and finishing with matching surface after Rm 5.00 171.80 859.00
housing G.I. pipe etc.
38 Making hole up to 20x20 cm and embedding pipes up
to 150 mm diameter in masonry and filling with cement
1:3:6 (1 cement : 3 coarse sand: 6 graded stone
aggregate 20 mm nominal size) including disposal of Rm 15.00 198.40 2976.00
39 Dismantling old C.I. pipes including excavation and
refilling trenches after taking out the pipes, breaking
lead caulked joints, melting of lead and making into
blocks, including stacking of pipes at site lead up to 50
100 mm diameter C.I. pipe Rm 40.00 340.80 13632.00
40 Constructing brick masonry manhole in cement mortar
1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab
with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) :
3 graded stone aggregate 20 mm nominal size),
foundation concrete 1:4:8 mix (1 cement : 4 coarse sand
(zone-III) : 8 graded stone aggregate 40 mm nominal
size), inside plastering 12 mm thick with cement mortar
1:3 (1 cement : 3 coarse sand) finished with floating
coat of neat cement and making channels in cement
concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size) finished with a
floating coat of neat cement complete as per standard
Inside size 90x80 cm and 45 cm deep including C.I.
cover with frame (light duty) 455x610 mm internal
dimensions, total weight of cover and frame to be not
less than 38 kg (weight of cover 23 kg and weight of
With common burnt clay F.P.S. (non modular) bricks of
class designation 7.5
Inside size 120x90 cm and 90 cm deep including C.I.
cover with frame (medium duty) 500 mm internal
diameter, total weight of cover and frame to be not less
than 116 kg (weight of cover 58 kg and weight of frame
With common burnt clay F.P.S. (non modular) bricks of
class designation 7.5
41 Extra for depth for manholes :
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
Unit Quanity Rate in Rs. Amount in Rs.
With common burnt clay F.P.S. (non modular) bricks of
class designation 7.5
With common burnt clay F.P.S. (non modular) bricks of
class designation 7.5
42 Providing and fixing in position pre-cast R.C.C.
manhole cover and frame of required shape and
approved quality 19.19.1 L D- 2.5
Rectangular shape 600x450 mm internal dimensions
43 Supplying and fixing C.I. cover 300x300 mm without
frame for gully trap (standard pattern) the weight of
cover to be not less than 4.5 kg
44 Making connection of drain or sewer line with existing
manhole including breaking into and making good the
walls, floors with cement concrete 1:2:4 mix (1 cement :
2 coarse sand : 4 graded stone aggregate 20 mm
nominal size) cement plastered on both sides with
cement mortar 1:3 (1 cement : 3 coarse sand), finished
with a floating coat of neat cement and making
necessary channels for the drain etc. complete :
For pipes 100 to 250 mm diameter No 1.00 683.70 683.70
45 Dismantling of manhole including R.C.C. top slab, C.I.
cover with frame, including stacking of useful materials
near the site and disposal of unserviceable materials
within 50 m lead as per direction of Engineer-in-charge:
Rectangular manhole 90x80 cm and 45 cm deep No 1.00 2096.10 2096.10
Rectangular manhole 120x90 cm and 90 cm deep
46 Extra for depth of manholes dismantled :
Rectangular manhole 90x80 cm and beyond 45 cm
Rectangular manhole 120x90 cm and beyond 90 cm
47 Constructing brick masonry road gully chamber
50x45x60 cm with bricks in cement mortar 1:4 (1
cement : 4 coarse sand) including 500x450 mm pre-cast
R.C.C. horizontal grating with frame complete as per
standard design :
With common burnt clay F.P.S. (non modular) bricks of
class designation 7.5
48 Constructing brick masonry road gully chamber
45x45x77.5 cm with bricks in cement mortar 1:4 (1
cement : 4 coarse sand ) with precast R.C.C. vertical
grating complete as per standard design : 19.28.1 With
common burnt clay F.P.S. (non modular) bricks of class
designation 7.5
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
Unit Quanity Rate in Rs. Amount in Rs.
49 Constructing brick masonry chamber for underground
C.I. inspection chamber and bends with bricks in
cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover
with frame (light duty) 455x610 mm internal dimensions,
total weight of cover with frame to be not less than 38 kg
(weight of cover 23 kg and weight of frame 15 kg),
R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine
sand : 3 graded stone aggregate 20 mm nominal size),
foundation concrete 1:5:10 (1 cement : 5 fine sand : 10
graded stone aggregate 40 mm nominal size), inside
plastering 12 mm thick with cement mortar 1:3 (1
cement : 3 coarse sand), finished smooth with a floating
coat of neat cement on walls and bed concrete etc.
complete as per standard design:
Inside dimensions 500x700 mm and 45 cm deep for
pipe line with one or two inlets :
With common burnt clay F.P.S. (non modular) bricks of
class designation 7.5
Inside dimensions 600x 850 mm and 45 cm deep for
pipe line with three or more inlets :
With common burnt clay F.P.S. (non modular) bricks of
class designation 7.5
50 Extra for depth beyond 45 cm of brick masonry
2 For 500x700 mm size 19.31.2.1 With common burnt
clay F.P.S. (non modular) bricks of class designation 7.5
For 600x850 mm size 19.31.3.1 With common burnt
clay F.P.S. (non modular) bricks of class designation 7.5 Rm 3.00 7177.15 21531.45
51 Making soak pit 2.5 m diameter 3.0 metre deep with 45
x 45 cm dry brick honey comb shaft with bricks and
S.W. drain pipe 100 mm diameter, 1.8 m long complete
as per standard design.
With common burnt clay F.P.S. (non modular) bricks of
class designation 7.5
52 Constructing soak pit 1.20x1.20x1.20 m filled with
brickbats including S.W. drain pipe 100 mm diameter
and 1.20 m long complete as per standard design
53 Supplying all materials,labour,T&P and fitting and fixing
U-PVC SWR soil waste ventilating pipes and fittings of
the following outside diameter conforming to ISI
No.13592/1992 to walls with nails,bobbins and wooden
plugs or laying in trenches including jointing with supply
of approved rubber lubricant by non-heat application
method/as per manufacturer's
specification,testing,earthwork in excavation in all kinds
of soil and refilling of trenches as per specification and
direction of Engineer-in-charge
110mm dia. U-PVC SWR pipes(Supreme/Ashirvad
75mm dia. U-PVC SWR pipes(Supreme/Ashirvad make
110mm dia. U-PVC door bend each 4.00 293.60 1174.40
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
Unit Quanity Rate in Rs. Amount in Rs.
110mm dia. U-PVC plain bend each 4.00 232.00 928.00
110mm dia. U-PVC plain tee each 4.00 322.70 1290.80
110mm dia. U-PVC door tee each 4.00 386.00 1544.00
110mm dia. U-PVC "P" trap each 4.00 497.30 1989.20
110mm dia. U-PVC plain shoe bend each 4.00 232.00 928.00
110mm dia. U-PVC offset without ear each 4.00 407.40 1629.60
110mm dia. U-PVC vent cowl each 4.00 58.20 232.80
110mm dia. U-PVC socket plain each 4.00 160.10 640.40
75mm dia. U-PVC door bend each 4.00 184.00 736.00
75mm dia. U-PVC plain bend each 4.00 225.10 900.40
54 Dismantling tile work in floors and roofs laid in cement
mortar including stacking material within 50 metres lead.
For thickness of tiles 10 mm to 25 mm sqm 45.00 60.50 2722.50
55 Supplying all materials,labour,T&P and laying in
trenches ( to level or slope ) unplasticized PVC pipe
conforming to IS:4985/2000 of the following outside dia
for class-3 (0.60mpa) including jointing with supply of
approved solvent cement by non-heat application
method/ as per manufactures's providing and laying in
trench cement concrete(1:4:8) with 40 mm size hard
granite metal in the Type-C-1 standard bedding
surrounding or encasing including concrete for bedding
and curing etc all complete as per PH specification and
direction of the Engineer-in-charge.
110mm dia U-PVC pipe ( Allround concrete ) mtr 15.00 982.50 14737.50
160mm dia U-PVC pipe ( Allround concrete ) mtr 10.00 1608.50 16085.00
56 Supplying fitting and fixing 30mm thick Solid panel PVC
door shutter consisting of frame made out of MS tube of
19 gauge thickness and size of 19mmx19mm for stile &
15mmx15mm for top and bolt rails set with PVC door
frame(Choukatha)of size 50mmx47mm is made out of
5cm thick sheet properly joined with solvent cement
adhesive as per section view with MS square tube of
19mm of 19mm gauge to be inserted inside to give extra
structural strength the price is inclusive of all cost of all
materials labour,T&P etc.complete in all respect as per
direction of the Engineer-in-charge.
57 Providing and laying Ceramic glazed floor tiles of size
300x300 mm (thickness to be specified by the
manufacturer) of 1st quality conforming to IS : 15622 of
approved make in colours such as White, Ivory, Grey,
Fume Red Brown, laid on 20 mm thick cement mortar sqm 30.00 935.60 28068.00
1:4 (1 Cement : 4 Coarse sand), Jointing with grey
cement slurry @ 3.3 kg/sqm including pointing the joints
with white cement and matching pigment etc., complete
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
Unit Quanity Rate in Rs. Amount in Rs.
58 Providing and fixing Ist quality ceramic glazed wall tiles
conforming to IS: 15622 (thickness to be specified by
the manufacturer), of approved make, in all colours,
shades except burgundy, bottle green, black of any size
as approved by Engineer-in-Charge, in skirting, risers of
steps and dados, over 12 mm thick bed of cement sqm 15.00 1063.45 15951.75
mortar 1:3 (1 cement : 3 coarse sand) and jointing with
grey cement slurry @ 3.3kg per sqm, including pointing
in white cement mixed with pigment of matching shade
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
PG Department of Physics
Sl No Item Rate in Amount in
1 Dismantling G.I. pipes (external work) including
excavation and refilling trenches after taking out
the pipes, manually/ by mechanical means
including stacking of pipes within 50 metres lead
as per direction of Engineer-in-charge
15 mm to 40 mm nominal bore Rm 40.00 142.10 5684.00
2 Dismantling aluminium/ Gypsum partitions,
doors, windows, fixed glazing and false ceiling
including disposal of unserviceable material and
stacking of serviceable material with in 50 Sqm 20.00 46.50 930.00
meters lead as directed by Engineer-in-charge.
3 Providing and fixing white vitreous china flat
back or wall corner type lipped front urinal basin
of 430x260x350 mm and 340x410x265 mm
sizes respectively with automatic flushing cistern
with standard flush pipe and C.P. brass
spreaders with brass unions and G.I clamps
complete, including painting of fittings and
brackets, cutting and making good the walls and
floors wherever required :
One urinal basin with 5 litre white P.V.C.
automatic flushing cistern
4 Providing and fixing white vitreous china flat
back half stall urinal of size 580x380x350 mm
with white PVC automatic flushing cistern, with
fittings, standard size C.P. brass flush pipe,
spreaders with unions and clamps (all in C.P.
brass) with waste fitting as per IS : 2556, C.I.
trap with outlet grating and other couplings in
C.P. brass, including painting of fittings and
cutting and making good the walls and floors
wherever required :
Single half stall urinal with 5 litre P.V.C.
automatic flushing cistern
5 Providing and fixing one piece construction
white vitreous china squatting plate with an
integral longitudinal flushing pipe, white P.V.C.
automatic flushing cistern, with fittings, standard
size G.I. / PVC flush pipe for back and front
flush with standard spreader pipes with fittings,
G.I clamps and C.P. brass coupling complete,
including painting of fittings and cutting and
making good the walls and floors etc. wherever
Single squatting plate with 5 litre P.V.C.
automatic flushing cistern
6 Providing and fixing wash basin with C.I.
brackets, 15 mm C.P. brass pillar taps, 32 mm
C.P. brass waste of standard pattern, including
painting of fittings and brackets, cutting and
making good the walls wherever required:
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
Sl No Item Rate in Amount in
White Vitreous China Wash basin size 550x400
mm with a pair of 15 mm C.P. brass pillar taps No 8.00 3158.70 25269.60
7 Providing and fixing white vitreous china water
closet squatting pan (Indian type) :
Orissa pattern W.C. pan of size 580x440 mm No 6.00 2758.20 16549.20
8 Providing and fixing P.V.C. low level flushing
cistern with manually controlled device (handle
lever) conforming to IS : 7231, with all fittings
and fixtures complete:
10 litre capacity - White No 6.00 1023.05 6138.30
9 Providing and fixing controlled flush, low level
cistern made of vitreous china with all fittings
10 litre (full flush) capacity-white
10 Providing and fixing white vitreous china
squatting plate urinal with integral rim
longitudinal flush pipe:
11 Providing and fixing white vitreous china wash
basin including making all connections but
excluding the cost of fittings :
Flat back wash basin of size 550x400 mm No 9.00 915.45 8239.05
12 Providing and fixing P.V.C. waste pipe for sink
or wash basin including P.V.C. waste fittings
Flexible pipe 17.28.2.1 32 mm dia.: No 6.00 104.35 626.10
13 Providing and fixing 600x450 mm beveled edge
mirror of superior glass (of approved quality)
complete with 6 mm thick hard board ground No 6.00 1411.15 8466.90
fixed to wooden cleats with C.P. brass screws
and washers complete.
14 Providing and fixing soil, waste and vent pipes :
Sand cast iron S&S pipe as per IS: 1729
15 Providing and filling the joints with spun yarn,
cement slurry and cement mortar 1:2 ( 1 cement
: 2 fine sand) in S.C.I./ C.I. Pipes :
100 mm dia pipe
16 Providing and fixing M.S. holder-bat clamps of
approved design to Sand Cast iron/cast iron
(spun) pipe embedded in and including cement
concrete blocks 10x10x10 cm of 1:2:4 mix (1
cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size), including cost
of cutting holes and making good the walls etc. :
For 100 mm dia pipe
17 Providing and fixing bend of required degree
with access door, insertion rubber washer 3 mm
thick, bolts and nuts complete. 17.38.1 100 mm
dia 17.38.1.1 Sand cast iron S&S as per IS -
18 Providing and fixing plain bend of required
degree. 17.39.1 100 mm dia.:
Sand cast iron S&S as per IS - 1729
19 Providing and fixing heel rest sanitary bend
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
Sl No Item Rate in Amount in
Sand cast iron S&S as per IS - 1729
20 Providing and fixing single equal plain junction
of required degree with access door, insertion
rubber washer 3 mm thick, bolts and nuts
complete. 17.43.1 100x100x100 mm:
Sand cast iron S&S as per IS - 1729
21 Providing and fixing single equal plain junction
of required degree : 17.44.1 100x100x100 mm:
Sand cast iron S&S as per IS - 1729
22 Providing and fixing sand cast iron S&S off sets
as per IS: 1729 17.53.1 76 mm off sets
With 100 mm dia pipe
23 Providing lead caulked joints to sand cast
iron/centrifugally cast (spun) iron pipes and
fittings of diameter :
24 Providing and fixing trap of self cleansing
design with screwed down or hinged grating with
or without vent arm complete, including cost of
cutting and making good the walls and floors :
100 mm inlet and 100 mm outlet
Sand cast iron S&S as per IS: 3989
25 Painting sand cast iron/ centrifugally cast (spun)
iron soil, waste vent pipes and fittings with two
coats of synthetic enamel paint of any colour
such as chocolate grey, or buff etc. over a coat
of primer (of approved quality) for new work :
100 mm diameter pipe
26 Providing and fixing Chlorinated Polyvinyl
Chloride (CPVC) pipes, having thermal stability
for hot & cold water supply, including all CPVC
plain & brass threaded fittings, i/c fixing the pipe
with clamps at 1.00 m spacing. This includes
jointing of pipes & fittings with one step CPVC
solvent cement and the cost of cutting chases
and making good the same including testing of
joints complete as per direction of Engineer in
Charge. Concealed work, including cutting
chases and making good the walls etc.
20 mm nominal dia Pipes Rm 20.00 513.75 10275.00
25 mm nominal dia Pipes Rm 20.00 626.05 12521.00
32 mm nominal dia Pipes Rm 20.00 712.75 14255.00
27 Providing and fixing gun metal gate valve with
C.I. wheel of approved quality (screwed end) :
32 mm nominal bore. No 3.00 589.90 1769.70
40 mm nominal bore No 1.00 707.30 707.30
28 Providing and fixing ball valve (brass) of
approved quality, High or low pressure, with
plastic floats complete :
25 mm nominal bore No 1.00 399.15 399.15
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
Sl No Item Rate in Amount in
29 Providing lead caulked joints to spun iron or C.I.
pipes and specials, including testing of joints but
excluding the cost of pig lead :
100 mm diameter pipe
30 Supplying pig lead at site of work.
31 Providing and fixing C.P. brass bib cock of
approved quality conforming to IS:8931 :
15 mm nominal bore No 8.00 434.20 3473.60
32 Providing and fixing C.P. brass long body bib
cock of approved quality conforming to IS
standards and weighing not less than 690 gms.
15 mm nominal bore each No 8.00 708.40 5667.20
33 Providing and fixing C.P. brass stop cock
(concealed) of standard design and of approved
make conforming to IS:8931.
15 mm nominal bore each
34 Providing and fixing C.P. brass angle valve for
basin mixer and geyser points of approved
quality conforming to IS:8931
15mm nominal bore No 10.00 500.35 5003.50
35 Providing and fixing C.P. Brass extension nipple
(size 15mmx50mm) of approved make and
quality as per direction of Engineer-in-charge. No 5.00 61.70 308.50
36 Cutting holes up to 15x15 cm in R.C.C. floors
and roofs for passing drain pipe etc. and
repairing the hole after insertion of drain pipe
etc. with cement concrete
1:2:4 (1 cement : 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size), including
finishing complete so as to make it leak proof No 10.00 377.10 3771.00
37 Making chases up to 7.5x7.5 cm in walls
including making good and finishing with Rm 5.00 171.80 859.00
matching surface after housing G.I. pipe etc.
38 Making hole up to 20x20 cm and embedding
pipes up to 150 mm diameter in masonry and
filling with cement concrete
1:3:6 (1 cement : 3 coarse sand: 6 graded stone
aggregate 20 mm nominal size) including Rm 15.00 198.40 2976.00
disposal of malba
39 Dismantling old C.I. pipes including excavation
and refilling trenches after taking out the pipes,
breaking lead caulked joints, melting of lead and
making into blocks, including stacking of pipes
at site lead up to 50 metre:
100 mm diameter C.I. pipe Rm 40.00 340.80 13632.00
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
Sl No Item Rate in Amount in
40 Constructing brick masonry manhole in cement
mortar 1:4 ( 1 cement : 4 coarse sand ) with
R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5
coarse sand (zone-III) : 3 graded stone
aggregate 20 mm nominal size), foundation
concrete 1:4:8 mix (1 cement : 4 coarse sand
(zone-III) : 8 graded stone aggregate 40 mm
nominal size), inside plastering 12 mm thick with
cement mortar 1:3 (1 cement : 3 coarse sand)
finished with floating coat of neat cement and
making channels in cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size) finished with a
floating coat of neat cement complete as per
standard design :
Inside size 90x80 cm and 45 cm deep including
C.I. cover with frame (light duty) 455x610 mm
internal dimensions, total weight of cover and
frame to be not less than 38 kg (weight of cover
23 kg and weight of frame 15 kg) :
With common burnt clay F.P.S. (non modular)
bricks of class designation 7.5
Inside size 120x90 cm and 90 cm deep
including C.I. cover with frame (medium duty)
500 mm internal diameter, total weight of cover
and frame to be not less than 116 kg (weight of
cover 58 kg and weight of frame 58 kg) :
With common burnt clay F.P.S. (non modular)
bricks of class designation 7.5
41 Extra for depth for manholes :
With common burnt clay F.P.S. (non modular)
bricks of class designation 7.5
With common burnt clay F.P.S. (non modular)
bricks of class designation 7.5
42 Providing and fixing in position pre-cast R.C.C.
manhole cover and frame of required shape and
approved quality 19.19.1 L D- 2.5
Rectangular shape 600x450 mm internal
43 Supplying and fixing C.I. cover 300x300 mm
without frame for gully trap (standard pattern)
the weight of cover to be not less than 4.5 kg
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
Sl No Item Rate in Amount in
44 Making connection of drain or sewer line with
existing manhole including breaking into and
making good the walls, floors with cement
concrete 1:2:4 mix (1 cement : 2 coarse sand : 4
graded stone aggregate 20 mm nominal size)
cement plastered on both sides with cement
mortar 1:3 (1 cement : 3 coarse sand), finished
with a floating coat of neat cement and making
necessary channels for the drain etc. complete :
For pipes 100 to 250 mm diameter No 1.00 683.70 683.70
45 Dismantling of manhole including R.C.C. top
slab, C.I. cover with frame, including stacking of
useful materials near the site and disposal of
unserviceable materials within 50 m lead as per
direction of Engineer-in-charge:
Rectangular manhole 90x80 cm and 45 cm deep
Rectangular manhole 120x90 cm and 90 cm
46 Extra for depth of manholes dismantled :
Rectangular manhole 90x80 cm and beyond 45
Rectangular manhole 120x90 cm and beyond
47 Constructing brick masonry road gully chamber
50x45x60 cm with bricks in cement mortar 1:4 (1
cement : 4 coarse sand) including 500x450 mm
pre-cast R.C.C. horizontal grating with frame
complete as per standard design :
With common burnt clay F.P.S. (non modular)
bricks of class designation 7.5
48 Constructing brick masonry road gully chamber
45x45x77.5 cm with bricks in cement mortar 1:4
(1 cement : 4 coarse sand ) with precast R.C.C.
vertical grating complete as per standard design No 2.00 6258.20 12516.40
: 19.28.1 With common burnt clay F.P.S. (non
modular) bricks of class designation 7.5
49 Constructing brick masonry chamber for
underground C.I. inspection chamber and bends
with bricks in cement mortar 1:4 (1 cement : 4
coarse sand) C.I. cover with frame (light duty)
455x610 mm internal dimensions, total weight of
cover with frame to be not less than 38 kg
(weight of cover 23 kg and weight of frame 15
kg), R.C.C. top slab with 1:1.5:3 mix (1 cement :
1.5 fine sand : 3 graded stone aggregate 20 mm
nominal size), foundation concrete 1:5:10 (1
cement : 5 fine sand : 10 graded stone
aggregate 40 mm nominal size), inside
plastering 12 mm thick with cement mortar 1:3
(1 cement : 3 coarse sand), finished smooth with
a floating coat of neat cement on walls and bed
concrete etc. complete as per standard design:
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
Sl No Item Rate in Amount in
Inside dimensions 500x700 mm and 45 cm deep
for pipe line with one or two inlets :
With common burnt clay F.P.S. (non modular)
bricks of class designation 7.5
Inside dimensions 600x 850 mm and 45 cm
deep for pipe line with three or more inlets :
With common burnt clay F.P.S. (non modular)
bricks of class designation 7.5
50 Extra for depth beyond 45 cm of brick masonry
2 For 500x700 mm size 19.31.2.1 With common
burnt clay F.P.S. (non modular) bricks of class
designation 7.5
For 600x850 mm size 19.31.3.1 With common
burnt clay F.P.S. (non modular) bricks of class Rm 2.00 7177.15 14354.30
designation 7.5
51 Making soak pit 2.5 m diameter 3.0 metre deep
with 45 x 45 cm dry brick honey comb shaft with
bricks and S.W. drain pipe 100 mm diameter,
1.8 m long complete as per standard design.
With common burnt clay F.P.S. (non modular)
bricks of class designation 7.5
52 Constructing soak pit 1.20x1.20x1.20 m filled
with brickbats including S.W. drain pipe 100 mm
diameter and 1.20 m long complete as per
standard design
53 Supplying all materials,labour,T&P and fitting
and fixing U-PVC SWR soil waste ventilating
pipes and fittings of the following outside
diameter conforming to ISI No.13592/1992 to
walls with nails,bobbins and wooden plugs or
laying in trenches including jointing with supply
of approved rubber lubricant by non-heat
application method/as per manufacturer's
specification,testing,earthwork in excavation in
all kinds of soil and refilling of trenches as per
specification and direction of Engineer-in-charge
110mm dia. U-PVC SWR
pipes(Supreme/Ashirvad make Type-A)
75mm dia. U-PVC SWR
pipes(Supreme/Ashirvad make Type-A)
110mm dia. U-PVC door bend each 4.00 293.60 1174.40
110mm dia. U-PVC plain bend each 4.00 232.00 928.00
110mm dia. U-PVC plain tee each 4.00 322.70 1290.80
110mm dia. U-PVC door tee each 4.00 386.00 1544.00
110mm dia. U-PVC "P" trap each 4.00 497.30 1989.20
110mm dia. U-PVC plain shoe bend each 4.00 232.00 928.00
110mm dia. U-PVC offset without ear each 4.00 407.40 1629.60
110mm dia. U-PVC vent cowl each 4.00 58.20 232.80
110mm dia. U-PVC socket plain each 4.00 160.10 640.40
75mm dia. U-PVC door bend each 4.00 184.00 736.00
75mm dia. U-PVC plain bend each 4.00 225.10 900.40
54 Dismantling tile work in floors and roofs laid in
cement mortar including stacking material within
50 metres lead.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
Sl No Item Rate in Amount in
For thickness of tiles 10 mm to 25 mm sqm 30.00 60.50 1815.00
55 Supplying all materials,labour,T&P and laying in
trenches ( to level or slope ) unplasticized PVC
pipe conforming to IS:4985/2000 of the following
outside dia for class-3 (0.60mpa) including
jointing with supply of approved solvent cement
by non-heat application method/ as per
manufactures's providing and laying in trench
cement concrete(1:4:8) with 40 mm size hard
granite metal in the Type-C-1 standard bedding
surrounding or encasing including concrete for
bedding and curing etc all complete as per PH
specification and direction of the Engineer-in-
110mm dia U-PVC pipe ( Allround concrete ) mtr 15.00 982.50 14737.50
160mm dia U-PVC pipe ( Allround concrete ) mtr 10.00 1608.50 16085.00
56 Supplying fitting and fixing 30mm thick Solid
panel PVC door shutter consisting of frame
made out of MS tube of 19 gauge thickness and
size of 19mmx19mm for stile & 15mmx15mm for
top and bolt rails set with PVC door
frame(Choukatha)of size 50mmx47mm is made
out of 5cm thick sheet properly joined with
solvent cement adhesive as per section view
with MS square tube of 19mm of 19mm gauge
to be inserted inside to give extra structural
strength the price is inclusive of all cost of all
materials labour,T&P etc.complete in all respect
as per direction of the Engineer-in-charge.
57 Providing and laying Ceramic glazed floor tiles
of size 300x300 mm (thickness to be specified
by the manufacturer) of 1st quality conforming to
IS : 15622 of approved make in colours such as
White, Ivory, Grey, Fume Red Brown, laid on 20
mm thick cement mortar 1:4 (1 Cement : 4 sqm 20.00 935.60 18712.00
Coarse sand), Jointing with grey cement slurry
@ 3.3 kg/sqm including pointing the joints with
white cement and matching pigment etc.,
58 Providing and fixing Ist quality ceramic glazed
wall tiles conforming to IS: 15622 (thickness to
be specified by the manufacturer), of approved
make, in all colours, shades except burgundy,
bottle green, black of any size as approved by
Engineer-in-Charge, in skirting, risers of steps
and dados, over 12 mm thick bed of cement sqm 10.00 1063.45 10634.50
mortar 1:3 (1 cement : 3 coarse sand) and
jointing with grey cement slurry @ 3.3kg per
sqm, including pointing in white cement mixed
with pigment of matching shade complete.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
Sl No Item Rate in Amount in
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
PG Department of Mathmatics & Computer Science
Sl No Item Unit Quanity Rate in Rs.
Dismantling G.I. pipes (external work)
including excavation and refilling trenches
after taking out the pipes, manually/ by
mechanical means including stacking of
pipes within 50 metres lead as per direction
of Engineer-in-charge
15 mm to 40 mm nominal bore Rm 38.00 142.10 5399.80
Dismantling aluminium/ Gypsum partitions,
doors, windows, fixed glazing and false
ceiling including disposal of unserviceable
material and stacking of serviceable
material with in 50 meters lead as directed
by Engineer-in-charge.
Providing and fixing white vitreous china
flat back or wall corner type lipped front
urinal basin of 430x260x350 mm and
340x410x265 mm sizes respectively with
automatic flushing cistern with standard
flush pipe and C.P. brass spreaders with
brass unions and G.I clamps complete,
including painting of fittings and brackets,
cutting and making good the walls and
floors wherever required :
One urinal basin with 5 litre white P.V.C.
automatic flushing cistern
Providing and fixing white vitreous china
flat back half stall urinal of size
580x380x350 mm with white PVC
automatic flushing cistern, with fittings,
standard size C.P. brass flush pipe,
4 spreaders with unions and clamps (all in
C.P. brass) with waste fitting as per IS :
2556, C.I. trap with outlet grating and other
couplings in C.P. brass, including painting
of fittings and cutting and making good the
walls and floors wherever required :
Single half stall urinal with 5 litre P.V.C.
automatic flushing cistern
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
Sl No Item Unit Quanity Rate in Rs.
Providing and fixing one piece construction
white vitreous china squatting plate with an
integral longitudinal flushing pipe, white
P.V.C. automatic flushing cistern, with
fittings, standard size G.I. / PVC flush pipe
5 for back and front flush with standard
spreader pipes with fittings, G.I clamps and
C.P. brass coupling complete, including
painting of fittings and cutting and making
good the walls and floors etc. wherever
Single squatting plate with 5 litre P.V.C.
automatic flushing cistern
Providing and fixing wash basin with C.I.
brackets, 15 mm C.P. brass pillar taps, 32
mm C.P. brass waste of standard pattern,
including painting of fittings and brackets,
cutting and making good the walls wherever
White Vitreous China Wash basin size
550x400 mm with a pair of 15 mm C.P. No 6.00 3158.70 18952.20
brass pillar taps
Providing and fixing white vitreous china
water closet squatting pan (Indian type) :
Orissa pattern W.C. pan of size 580x440
Providing and fixing P.V.C. low level
flushing cistern with manually controlled
device (handle lever) conforming to IS :
7231, with all fittings and fixtures complete:
10 litre capacity - White No 6.00 1023.05 6138.30
Providing and fixing controlled flush, low
9 level cistern made of vitreous china with all
fittings complete:
10 litre (full flush) capacity-white
Providing and fixing white vitreous china
10 squatting plate urinal with integral rim
longitudinal flush pipe:
Providing and fixing white vitreous china
wash basin including making all
connections but excluding the cost of
Flat back wash basin of size 550x400 mm No 6.00 915.45 5492.70
Providing and fixing P.V.C. waste pipe for
12 sink or wash basin including P.V.C. waste
fittings complete.
Flexible pipe 17.28.2.1 32 mm dia.: No 6.00 104.35 626.10
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
Sl No Item Unit Quanity Rate in Rs.
Providing and fixing 600x450 mm beveled
edge mirror of superior glass (of approved
13 quality) complete with 6 mm thick hard No 6.00 1411.15 8466.90
board ground fixed to wooden cleats with
C.P. brass screws and washers complete.
Providing and fixing soil, waste and vent
pipes : 17.35.1 100 mm dia.:
Sand cast iron S&S pipe as per IS: 1729
Providing and filling the joints with spun
yarn, cement slurry and cement mortar 1:2
( 1 cement : 2 fine sand) in S.C.I./ C.I.
100 mm dia pipe
Providing and fixing M.S. holder-bat clamps
of approved design to Sand Cast iron/cast
iron (spun) pipe embedded in and including
cement concrete blocks 10x10x10 cm of
1:2:4 mix (1 cement : 2 coarse sand : 4
graded stone aggregate 20 mm nominal
size), including cost of cutting holes and
making good the walls etc. :
For 100 mm dia pipe
Providing and fixing bend of required
degree with access door, insertion rubber
17 washer 3 mm thick, bolts and nuts
complete. 17.38.1 100 mm dia 17.38.1.1
Sand cast iron S&S as per IS - 1729
Providing and fixing plain bend of required
degree. 17.39.1 100 mm dia.:
Sand cast iron S&S as per IS - 1729
Providing and fixing heel rest sanitary bend
Sand cast iron S&S as per IS - 1729
Providing and fixing single equal plain
junction of required degree with access
20 door, insertion rubber washer 3 mm thick,
bolts and nuts complete. 17.43.1
Sand cast iron S&S as per IS - 1729
Providing and fixing single equal plain
21 junction of required degree : 17.44.1
Sand cast iron S&S as per IS - 1729
Providing and fixing sand cast iron S&S off
sets as per IS: 1729 17.53.1 76 mm off sets
With 100 mm dia pipe
Providing lead caulked joints to sand cast
23 iron/centrifugally cast (spun) iron pipes and
fittings of diameter :
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
Sl No Item Unit Quanity Rate in Rs.
Providing and fixing trap of self cleansing
design with screwed down or hinged grating
24 with or without vent arm complete, including
cost of cutting and making good the walls
100 mm inlet and 100 mm outlet
Sand cast iron S&S as per IS: 3989
Painting sand cast iron/ centrifugally cast
(spun) iron soil, waste vent pipes and
fittings with two coats of synthetic enamel
paint of any colour such as chocolate grey,
or buff etc. over a coat of primer (of
approved quality) for new work :
100 mm diameter pipe
Providing and fixing Chlorinated Polyvinyl
Chloride (CPVC) pipes, having thermal
stability for hot & cold water supply,
including all CPVC plain & brass threaded
fittings, i/c fixing the pipe with clamps at
1.00 m spacing. This includes jointing of
26 pipes & fittings with one step CPVC solvent
cement and the cost of cutting chases and
making good the same including testing of
joints complete as per direction of Engineer
in Charge. Concealed work, including
cutting chases and making good the walls
20 mm nominal dia Pipes Rm 50.00 513.75 25687.50
25 mm nominal dia Pipes Rm 50.00 626.05 31302.50
32 mm nominal dia Pipes Rm 60.00 712.75 42765.00
Providing and fixing gun metal gate valve
27 with C.I. wheel of approved quality
(screwed end) :
32 mm nominal bore. No 3.00 589.90 1769.70
40 mm nominal bore No 1.00 707.30 707.30
Providing and fixing ball valve (brass) of
28 approved quality, High or low pressure, with
plastic floats complete :
25 mm nominal bore No 1.00 399.15 399.15
Providing lead caulked joints to spun iron or
29 C.I. pipes and specials, including testing of
joints but excluding the cost of pig lead :
100 mm diameter pipe
30 Supplying pig lead at site of work.
Providing and fixing C.P. brass bib cock of
approved quality conforming to IS:8931 :
15 mm nominal bore No 8.00 434.20 3473.60
Providing and fixing C.P. brass long body
bib cock of approved quality conforming to
IS standards and weighing not less than
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
Sl No Item Unit Quanity Rate in Rs.
15 mm nominal bore each No 8.00 708.40 5667.20
Providing and fixing C.P. brass stop cock
33 (concealed) of standard design and of
approved make conforming to IS:8931.
15 mm nominal bore each
Providing and fixing C.P. brass angle valve
34 for basin mixer and geyser points of
approved quality conforming to IS:8931
15mm nominal bore No 10.00 500.35 5003.50
Providing and fixing C.P. Brass extension
nipple (size 15mmx50mm) of approved
make and quality as per direction of
Engineer-in-charge.
Cutting holes up to 15x15 cm in R.C.C.
floors and roofs for passing drain pipe etc.
and repairing the hole after insertion of
drain pipe etc. with cement concrete
1:2:4 (1 cement : 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size),
including finishing complete so as to make
Making chases up to 7.5x7.5 cm in walls
37 including making good and finishing with Rm 5.00 171.80 859.00
matching surface after housing G.I. pipe etc.
Making hole up to 20x20 cm and
38 embedding pipes up to 150 mm diameter in
masonry and filling with cement concrete
1:3:6 (1 cement : 3 coarse sand: 6 graded
stone aggregate 20 mm nominal size) Rm 15.00 198.40 2976.00
including disposal of malba
Dismantling old C.I. pipes including
excavation and refilling trenches after
taking out the pipes, breaking lead caulked
joints, melting of lead and making into
blocks, including stacking of pipes at site
lead up to 50 metre:
100 mm diameter C.I. pipe Rm 40.00 340.80 13632.00
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
Sl No Item Unit Quanity Rate in Rs.
Constructing brick masonry manhole in
cement mortar 1:4 ( 1 cement : 4 coarse
sand ) with R.C.C. top slab with 1:1.5:3 mix
(1 cement : 1.5 coarse sand (zone-III) : 3
graded stone aggregate 20 mm nominal
size), foundation concrete 1:4:8 mix (1
cement : 4 coarse sand (zone-III) : 8 graded
stone aggregate 40 mm nominal size),
inside plastering 12 mm thick with cement
mortar 1:3 (1 cement : 3 coarse sand)
finished with floating coat of neat cement
and making channels in cement concrete
1:2:4 (1 cement : 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size)
finished with a floating coat of neat cement
complete as per standard design :
Inside size 90x80 cm and 45 cm deep
including C.I. cover with frame (light duty)
455x610 mm internal dimensions, total
weight of cover and frame to be not less
than 38 kg (weight of cover 23 kg and
weight of frame 15 kg) :
With common burnt clay F.P.S. (non
modular) bricks of class designation 7.5
Inside size 120x90 cm and 90 cm deep
including C.I. cover with frame (medium
duty) 500 mm internal diameter, total weight
of cover and frame to be not less than 116
kg (weight of cover 58 kg and weight of
With common burnt clay F.P.S. (non
modular) bricks of class designation 7.5
41 Extra for depth for manholes :
With common burnt clay F.P.S. (non
modular) bricks of class designation 7.5
With common burnt clay F.P.S. (non
modular) bricks of class designation 7.5
Providing and fixing in position pre-cast
R.C.C. manhole cover and frame of
required shape and approved quality
Rectangular shape 600x450 mm internal
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
Sl No Item Unit Quanity Rate in Rs.
Supplying and fixing C.I. cover 300x300
mm without frame for gully trap (standard
pattern) the weight of cover to be not less
Making connection of drain or sewer line
with existing manhole including breaking
into and making good the walls, floors with
cement concrete 1:2:4 mix (1 cement : 2
coarse sand : 4 graded stone aggregate 20
mm nominal size) cement plastered on both
sides with cement mortar 1:3 (1 cement : 3
coarse sand), finished with a floating coat
of neat cement and making necessary
channels for the drain etc. complete :
For pipes 100 to 250 mm diameter No 1.00 683.70 683.70
Dismantling of manhole including R.C.C.
top slab, C.I. cover with frame, including
stacking of useful materials near the site
and disposal of unserviceable materials
within 50 m lead as per direction of
Engineer-in-charge:
Rectangular manhole 90x80 cm and 45 cm
Rectangular manhole 120x90 cm and 90
46 Extra for depth of manholes dismantled :
Rectangular manhole 90x80 cm and
beyond 45 cm depth
Rectangular manhole 120x90 cm and
beyond 90 cm depth
Constructing brick masonry road gully
chamber 50x45x60 cm with bricks in
cement mortar 1:4 (1 cement : 4 coarse
sand) including 500x450 mm pre-cast
R.C.C. horizontal grating with frame
complete as per standard design :
With common burnt clay F.P.S. (non
modular) bricks of class designation 7.5
Constructing brick masonry road gully
chamber 45x45x77.5 cm with bricks in
cement mortar 1:4 (1 cement : 4 coarse
48 sand ) with precast R.C.C. vertical grating No 6.00 6258.20 37549.20
complete as per standard design : 19.28.1
With common burnt clay F.P.S. (non
modular) bricks of class designation 7.5
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
Sl No Item Unit Quanity Rate in Rs.
Constructing brick masonry chamber for
underground C.I. inspection chamber and
bends with bricks in cement mortar 1:4 (1
cement : 4 coarse sand) C.I. cover with
frame (light duty) 455x610 mm internal
dimensions, total weight of cover with frame
to be not less than 38 kg (weight of cover
23 kg and weight of frame 15 kg), R.C.C.
top slab with 1:1.5:3 mix (1 cement : 1.5
fine sand : 3 graded stone aggregate 20
mm nominal size), foundation concrete
1:5:10 (1 cement : 5 fine sand : 10 graded
stone aggregate 40 mm nominal size),
inside plastering 12 mm thick with cement
mortar 1:3 (1 cement : 3 coarse sand),
finished smooth with a floating coat of neat
cement on walls and bed concrete etc.
complete as per standard design:
Inside dimensions 500x700 mm and 45 cm
deep for pipe line with one or two inlets :
With common burnt clay F.P.S. (non
modular) bricks of class designation 7.5
Inside dimensions 600x 850 mm and 45 cm
deep for pipe line with three or more inlets :
With common burnt clay F.P.S. (non
modular) bricks of class designation 7.5
Extra for depth beyond 45 cm of brick
masonry chamber :
2 For 500x700 mm size 19.31.2.1 With
common burnt clay F.P.S. (non modular)
bricks of class designation 7.5
For 600x850 mm size 19.31.3.1 With
common burnt clay F.P.S. (non modular) Rm 3.00 7177.15 21531.45
bricks of class designation 7.5
Making soak pit 2.5 m diameter 3.0 metre
deep with 45 x 45 cm dry brick honey comb
51 shaft with bricks and S.W. drain pipe 100
mm diameter, 1.8 m long complete as per
standard design.
With common burnt clay F.P.S. (non
modular) bricks of class designation 7.5
Constructing soak pit 1.20x1.20x1.20 m
filled with brickbats including S.W. drain
pipe 100 mm diameter and 1.20 m long
complete as per standard design
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
Sl No Item Unit Quanity Rate in Rs.
Supplying all materials,labour,T&P and
fitting and fixing U-PVC SWR soil waste
ventilating pipes and fittings of the following
outside diameter conforming to ISI
No.13592/1992 to walls with nails,bobbins
and wooden plugs or laying in trenches
53 including jointing with supply of approved
rubber lubricant by non-heat application
method/as per manufacturer's
specification,testing,earthwork in
excavation in all kinds of soil and refilling of
trenches as per specification and direction
of Engineer-in-charge
110mm dia. U-PVC SWR
pipes(Supreme/Ashirvad make Type-A)
75mm dia. U-PVC SWR
pipes(Supreme/Ashirvad make Type-A)
110mm dia. U-PVC door bend each 6.00 293.60 1761.60
110mm dia. U-PVC plain bend each 6.00 232.00 1392.00
110mm dia. U-PVC plain tee each 6.00 322.70 1936.20
110mm dia. U-PVC door tee each 6.00 386.00 2316.00
110mm dia. U-PVC "P" trap each 6.00 497.30 2983.80
110mm dia. U-PVC plain shoe bend each 6.00 232.00 1392.00
110mm dia. U-PVC offset without ear each 6.00 407.40 2444.40
110mm dia. U-PVC vent cowl each 6.00 58.20 349.20
110mm dia. U-PVC socket plain each 6.00 160.10 960.60
75mm dia. U-PVC door bend each 6.00 184.00 1104.00
75mm dia. U-PVC plain bend each 6.00 225.10 1350.60
Dismantling tile work in floors and roofs laid
54 in cement mortar including stacking
material within 50 metres lead.
For thickness of tiles 10 mm to 25 mm sqm 60.00 60.50 3630.00
Supplying all materials,labour,T&P and
laying in trenches ( to level or slope )
unplasticized PVC pipe conforming to
IS:4985/2000 of the following outside dia for
class-3 (0.60mpa) including jointing with
supply of approved solvent cement by non-
heat application method/ as per
manufactures's providing and laying in
trench cement concrete(1:4:8) with 40 mm
size hard granite metal in the Type-C-1
standard bedding surrounding or encasing
including concrete for bedding and curing
etc all complete as per PH specification and
direction of the Engineer-in-charge.
110mm dia U-PVC pipe ( Allround concrete
160mm dia U-PVC pipe ( Allround concrete
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
Sl No Item Unit Quanity Rate in Rs.
Supplying fitting and fixing 30mm thick
Solid panel PVC door shutter consisting of
frame made out of MS tube of 19 gauge
thickness and size of 19mmx19mm for stile
& 15mmx15mm for top and bolt rails set
with PVC door frame(Choukatha)of size
50mmx47mm is made out of 5cm thick
56 sheet properly joined with solvent cement
adhesive as per section view with MS
square tube of 19mm of 19mm gauge to be
inserted inside to give extra structural
strength the price is inclusive of all cost of
all materials labour,T&P etc.complete in all
respect as per direction of the Engineer-in-
Providing and laying Ceramic glazed floor
tiles of size 300x300 mm (thickness to be
specified by the manufacturer) of 1st quality
conforming to IS : 15622 of approved make
in colours such as White, Ivory, Grey,
57 Fume Red Brown, laid on 20 mm thick sqm 40.00 935.60 37424.00
cement mortar 1:4 (1 Cement : 4 Coarse
sand), Jointing with grey cement slurry @
3.3 kg/sqm including pointing the joints with
white cement and matching pigment etc.,
Providing and fixing Ist quality ceramic
glazed wall tiles conforming to IS: 15622
(thickness to be specified by the
manufacturer), of approved make, in all
colours, shades except burgundy, bottle
green, black of any size as approved by
58 Engineer-in-Charge, in skirting, risers of sqm 20.00 1063.45 21269.00
steps and dados, over 12 mm thick bed of
cement mortar 1:3 (1 cement : 3 coarse
sand) and jointing with grey cement slurry
@ 3.3kg per sqm, including pointing in
white cement mixed with pigment of
matching shade complete.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
PG Department of Geography
Sl Item Amount in
Unit Quanity Rate in Rs.
1 Dismantling G.I. pipes (external work) including
excavation and refilling trenches after taking out the
pipes, manually/ by mechanical means including
stacking of pipes within 50 metres lead as per
direction of Engineer-in-charge
15 mm to 40 mm nominal bore Rm 50.00 142.10 7105.00
2 Dismantling aluminium/ Gypsum partitions, doors,
windows, fixed glazing and false ceiling including
disposal of unserviceable material and stacking of Sqm 30.00 46.50 1395.00
serviceable material with in 50 meters lead as
directed by Engineer-in-charge.
3 Providing and fixing white vitreous china flat back or
wall corner type lipped front urinal basin of
430x260x350 mm and 340x410x265 mm sizes
respectively with automatic flushing cistern with
standard flush pipe and C.P. brass spreaders with
brass unions and G.I clamps complete, including
painting of fittings and brackets, cutting and making
good the walls and floors wherever required :
One urinal basin with 5 litre white P.V.C. automatic
flushing cistern
4 Providing and fixing white vitreous china flat back
half stall urinal of size 580x380x350 mm with white
PVC automatic flushing cistern, with fittings,
standard size C.P. brass flush pipe, spreaders with
unions and clamps (all in C.P. brass) with waste
fitting as per IS : 2556, C.I. trap with outlet grating
and other couplings in C.P. brass, including painting
of fittings and cutting and making good the walls and
floors wherever required :
Single half stall urinal with 5 litre P.V.C. automatic
flushing cistern
5 Providing and fixing one piece construction white
vitreous china squatting plate with an integral
longitudinal flushing pipe, white P.V.C. automatic
flushing cistern, with fittings, standard size G.I. / PVC
flush pipe for back and front flush with standard
spreader pipes with fittings, G.I clamps and C.P.
brass coupling complete, including painting of fittings
and cutting and making good the walls and floors
etc. wherever required :
Single squatting plate with 5 litre P.V.C. automatic
flushing cistern
6 Providing and fixing wash basin with C.I. brackets,
15 mm C.P. brass pillar taps, 32 mm C.P. brass
waste of standard pattern, including painting of
fittings and brackets, cutting and making good the
walls wherever required:
White Vitreous China Wash basin size 550x400 mm
with a pair of 15 mm C.P. brass pillar taps
7 Providing and fixing white vitreous china water closet
squatting pan (Indian type) :
Orissa pattern W.C. pan of size 580x440 mm No 6.00 2758.20 16549.20
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
Sl Item Amount in
Unit Quanity Rate in Rs.
8 Providing and fixing P.V.C. low level flushing cistern
with manually controlled device (handle lever)
conforming to IS : 7231, with all fittings and fixtures
10 litre capacity - White No 6.00 1023.05 6138.30
9 Providing and fixing controlled flush, low level cistern
made of vitreous china with all fittings complete:
10 litre (full flush) capacity-white
10 Providing and fixing white vitreous china squatting
plate urinal with integral rim longitudinal flush pipe:
11 Providing and fixing white vitreous china wash basin
including making all connections but excluding the
cost of fittings :
Flat back wash basin of size 550x400 mm No 6.00 915.45 5492.70
12 Providing and fixing P.V.C. waste pipe for sink or
wash basin including P.V.C. waste fittings complete.
Flexible pipe 17.28.2.1 32 mm dia.: No 6.00 104.35 626.10
13 Providing and fixing 600x450 mm beveled edge
mirror of superior glass (of approved quality)
complete with 6 mm thick hard board ground fixed to No 8.00 1411.15 11289.20
wooden cleats with C.P. brass screws and washers
14 Providing and fixing soil, waste and vent pipes :
Sand cast iron S&S pipe as per IS: 1729
15 Providing and filling the joints with spun yarn,
cement slurry and cement mortar 1:2 ( 1 cement : 2
fine sand) in S.C.I./ C.I. Pipes :
100 mm dia pipe
16 Providing and fixing M.S. holder-bat clamps of
approved design to Sand Cast iron/cast iron (spun)
pipe embedded in and including cement concrete
blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2
coarse sand : 4 graded stone aggregate 20 mm
nominal size), including cost of cutting holes and
making good the walls etc. :
For 100 mm dia pipe
17 Providing and fixing bend of required degree with
access door, insertion rubber washer 3 mm thick,
bolts and nuts complete. 17.38.1 100 mm dia
17.38.1.1 Sand cast iron S&S as per IS - 1729
18 Providing and fixing plain bend of required degree.
Sand cast iron S&S as per IS - 1729
19 Providing and fixing heel rest sanitary bend 17.40.1
Sand cast iron S&S as per IS - 1729
20 Providing and fixing single equal plain junction of
required degree with access door, insertion rubber
washer 3 mm thick, bolts and nuts complete. 17.43.1
Sand cast iron S&S as per IS - 1729
21 Providing and fixing single equal plain junction of
required degree : 17.44.1 100x100x100 mm:
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
Sl Item Amount in
Unit Quanity Rate in Rs.
Sand cast iron S&S as per IS - 1729
22 Providing and fixing sand cast iron S&S off sets as
per IS: 1729 17.53.1 76 mm off sets
With 100 mm dia pipe
23 Providing lead caulked joints to sand cast
iron/centrifugally cast (spun) iron pipes and fittings of
24 Providing and fixing trap of self cleansing design
with screwed down or hinged grating with or without
vent arm complete, including cost of cutting and
making good the walls and floors :
100 mm inlet and 100 mm outlet
Sand cast iron S&S as per IS: 3989
25 Painting sand cast iron/ centrifugally cast (spun) iron
soil, waste vent pipes and fittings with two coats of
synthetic enamel paint of any colour such as
chocolate grey, or buff etc. over a coat of primer (of
approved quality) for new work :
100 mm diameter pipe
26 Providing and fixing Chlorinated Polyvinyl Chloride
(CPVC) pipes, having thermal stability for hot & cold
water supply, including all CPVC plain & brass
threaded fittings, i/c fixing the pipe with clamps at
1.00 m spacing. This includes jointing of pipes &
fittings with one step CPVC solvent cement and the
cost of cutting chases and making good the same
including testing of joints complete as per direction of
Engineer in Charge. Concealed work, including
cutting chases and making good the walls etc.
20 mm nominal dia Pipes Rm 20.00 513.75 10275.00
25 mm nominal dia Pipes Rm 20.00 626.05 12521.00
32 mm nominal dia Pipes Rm 10.00 712.75 7127.50
27 Providing and fixing gun metal gate valve with C.I.
wheel of approved quality (screwed end) :
32 mm nominal bore. No 3.00 589.90 1769.70
40 mm nominal bore No 1.00 707.30 707.30
28 Providing and fixing ball valve (brass) of approved
quality, High or low pressure, with plastic floats
25 mm nominal bore No 1.00 399.15 399.15
29 Providing lead caulked joints to spun iron or C.I.
pipes and specials, including testing of joints but
excluding the cost of pig lead :
100 mm diameter pipe
30 Supplying pig lead at site of work.
31 Providing and fixing C.P. brass bib cock of approved
quality conforming to IS:8931 :
15 mm nominal bore No 8.00 434.20 3473.60
32 Providing and fixing C.P. brass long body bib cock of
approved quality conforming to IS standards and
weighing not less than 690 gms.
15 mm nominal bore each No 8.00 708.40 5667.20
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
Sl Item Amount in
Unit Quanity Rate in Rs.
33 Providing and fixing C.P. brass stop cock
(concealed) of standard design and of approved
make conforming to IS:8931.
15 mm nominal bore each
34 Providing and fixing C.P. brass angle valve for basin
mixer and geyser points of approved quality
conforming to IS:8931
15mm nominal bore No 10.00 500.35 5003.50
35 Providing and fixing C.P. Brass extension nipple
(size 15mmx50mm) of approved make and quality as No 5.00 61.70 308.50
per direction of Engineer-in-charge.
36 Cutting holes up to 15x15 cm in R.C.C. floors and
roofs for passing drain pipe etc. and repairing the
hole after insertion of drain pipe etc. with cement
1:2:4 (1 cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size), including finishing No 10.00 377.10 3771.00
complete so as to make it leak proof
37 Making chases up to 7.5x7.5 cm in walls including
making good and finishing with matching surface Rm 5.00 171.80 859.00
after housing G.I. pipe etc.
38 Making hole up to 20x20 cm and embedding pipes
up to 150 mm diameter in masonry and filling with
cement concrete
1:3:6 (1 cement : 3 coarse sand: 6 graded stone
aggregate 20 mm nominal size) including disposal of Rm 15.00 198.40 2976.00
39 Dismantling old C.I. pipes including excavation and
refilling trenches after taking out the pipes, breaking
lead caulked joints, melting of lead and making into
blocks, including stacking of pipes at site lead up to
100 mm diameter C.I. pipe Rm 40.00 340.80 13632.00
40 Constructing brick masonry manhole in cement
mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C.
top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand
(zone-III) : 3 graded stone aggregate 20 mm nominal
size), foundation concrete 1:4:8 mix (1 cement : 4
coarse sand (zone-III) : 8 graded stone aggregate 40
mm nominal size), inside plastering 12 mm thick with
cement mortar 1:3 (1 cement : 3 coarse sand)
finished with floating coat of neat cement and making
channels in cement concrete 1:2:4 (1 cement : 2
coarse sand : 4 graded stone aggregate 20 mm
nominal size) finished with a floating coat of neat
cement complete as per standard design :
Inside size 90x80 cm and 45 cm deep including C.I.
cover with frame (light duty) 455x610 mm internal
dimensions, total weight of cover and frame to be not
less than 38 kg (weight of cover 23 kg and weight of
With common burnt clay F.P.S. (non modular) bricks
of class designation 7.5
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
Sl Item Amount in
Unit Quanity Rate in Rs.
Inside size 120x90 cm and 90 cm deep including C.I.
cover with frame (medium duty) 500 mm internal
diameter, total weight of cover and frame to be not
less than 116 kg (weight of cover 58 kg and weight of
With common burnt clay F.P.S. (non modular) bricks
of class designation 7.5
41 Extra for depth for manholes :
With common burnt clay F.P.S. (non modular) bricks
of class designation 7.5
With common burnt clay F.P.S. (non modular) bricks
of class designation 7.5
42 Providing and fixing in position pre-cast R.C.C.
manhole cover and frame of required shape and
approved quality 19.19.1 L D- 2.5
Rectangular shape 600x450 mm internal dimensions
43 Supplying and fixing C.I. cover 300x300 mm without
frame for gully trap (standard pattern) the weight of
cover to be not less than 4.5 kg
44 Making connection of drain or sewer line with
existing manhole including breaking into and making
good the walls, floors with cement concrete 1:2:4 mix
(1 cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size) cement plastered on
both sides with cement mortar 1:3 (1 cement : 3
coarse sand), finished with a floating coat of neat
cement and making necessary channels for the drain
etc. complete :
For pipes 100 to 250 mm diameter No 1.00 683.70 683.70
45 Dismantling of manhole including R.C.C. top slab,
C.I. cover with frame, including stacking of useful
materials near the site and disposal of unserviceable
materials within 50 m lead as per direction of
Engineer-in-charge:
Rectangular manhole 90x80 cm and 45 cm deep No 1.00 2096.10 2096.10
Rectangular manhole 120x90 cm and 90 cm deep
46 Extra for depth of manholes dismantled :
Rectangular manhole 90x80 cm and beyond 45 cm
Rectangular manhole 120x90 cm and beyond 90 cm
47 Constructing brick masonry road gully chamber
50x45x60 cm with bricks in cement mortar 1:4 (1
cement : 4 coarse sand) including 500x450 mm pre-
cast R.C.C. horizontal grating with frame complete
as per standard design :
With common burnt clay F.P.S. (non modular) bricks
of class designation 7.5
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
Sl Item Amount in
Unit Quanity Rate in Rs.
48 Constructing brick masonry road gully chamber
45x45x77.5 cm with bricks in cement mortar 1:4 (1
cement : 4 coarse sand ) with precast R.C.C. vertical
grating complete as per standard design : 19.28.1 No 2.00 6258.20 12516.40
With common burnt clay F.P.S. (non modular) bricks
of class designation 7.5
49 Constructing brick masonry chamber for
underground C.I. inspection chamber and bends with
bricks in cement mortar 1:4 (1 cement : 4 coarse
sand) C.I. cover with frame (light duty) 455x610 mm
internal dimensions, total weight of cover with frame
to be not less than 38 kg (weight of cover 23 kg and
weight of frame 15 kg), R.C.C. top slab with 1:1.5:3
mix (1 cement : 1.5 fine sand : 3 graded stone
aggregate 20 mm nominal size), foundation concrete
1:5:10 (1 cement : 5 fine sand : 10 graded stone
aggregate 40 mm nominal size), inside plastering 12
mm thick with cement mortar 1:3 (1 cement : 3
coarse sand), finished smooth with a floating coat of
neat cement on walls and bed concrete etc.
complete as per standard design:
Inside dimensions 500x700 mm and 45 cm deep for
pipe line with one or two inlets :
With common burnt clay F.P.S. (non modular) bricks
of class designation 7.5
Inside dimensions 600x 850 mm and 45 cm deep for
pipe line with three or more inlets :
With common burnt clay F.P.S. (non modular) bricks
of class designation 7.5
50 Extra for depth beyond 45 cm of brick masonry
2 For 500x700 mm size 19.31.2.1 With common
burnt clay F.P.S. (non modular) bricks of class
designation 7.5
For 600x850 mm size 19.31.3.1 With common burnt
clay F.P.S. (non modular) bricks of class designation Rm 2.00 7177.15 14354.30
51 Making soak pit 2.5 m diameter 3.0 metre deep with
45 x 45 cm dry brick honey comb shaft with bricks
and S.W. drain pipe 100 mm diameter, 1.8 m long
complete as per standard design.
With common burnt clay F.P.S. (non modular) bricks
of class designation 7.5
52 Constructing soak pit 1.20x1.20x1.20 m filled with
brickbats including S.W. drain pipe 100 mm diameter
and 1.20 m long complete as per standard design
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
Sl Item Amount in
Unit Quanity Rate in Rs.
53 Supplying all materials,labour,T&P and fitting and
fixing U-PVC SWR soil waste ventilating pipes and
fittings of the following outside diameter conforming
to ISI No.13592/1992 to walls with nails,bobbins and
wooden plugs or laying in trenches including jointing
with supply of approved rubber lubricant by non-heat
application method/as per manufacturer's
specification,testing,earthwork in excavation in all
kinds of soil and refilling of trenches as per
specification and direction of Engineer-in-charge
110mm dia. U-PVC SWR pipes(Supreme/Ashirvad
75mm dia. U-PVC SWR pipes(Supreme/Ashirvad
110mm dia. U-PVC door bend each 4.00 293.60 1174.40
110mm dia. U-PVC plain bend each 4.00 232.00 928.00
110mm dia. U-PVC plain tee each 4.00 322.70 1290.80
110mm dia. U-PVC door tee each 4.00 386.00 1544.00
110mm dia. U-PVC "P" trap each 4.00 497.30 1989.20
110mm dia. U-PVC plain shoe bend each 4.00 232.00 928.00
110mm dia. U-PVC offset without ear each 4.00 407.40 1629.60
110mm dia. U-PVC vent cowl each 4.00 58.20 232.80
110mm dia. U-PVC socket plain each 4.00 160.10 640.40
75mm dia. U-PVC door bend each 4.00 184.00 736.00
75mm dia. U-PVC plain bend each 4.00 225.10 900.40
54 Dismantling tile work in floors and roofs laid in
cement mortar including stacking material within 50
For thickness of tiles 10 mm to 25 mm sqm 30.00 60.50 1815.00
55 Supplying all materials,labour,T&P and laying in
trenches ( to level or slope ) unplasticized PVC pipe
conforming to IS:4985/2000 of the following outside
dia for class-3 (0.60mpa) including jointing with
supply of approved solvent cement by non-heat
application method/ as per manufactures's providing
and laying in trench cement concrete(1:4:8) with 40
mm size hard granite metal in the Type-C-1 standard
bedding surrounding or encasing including concrete
for bedding and curing etc all complete as per PH
specification and direction of the Engineer-in-charge.
110mm dia U-PVC pipe ( Allround concrete ) mtr 15.00 982.50 14737.50
160mm dia U-PVC pipe ( Allround concrete ) mtr 10.00 1608.50 16085.00
56 Supplying fitting and fixing 30mm thick Solid panel
PVC door shutter consisting of frame made out of
MS tube of 19 gauge thickness and size of
19mmx19mm for stile & 15mmx15mm for top and
bolt rails set with PVC door frame(Choukatha)of size
50mmx47mm is made out of 5cm thick sheet
properly joined with solvent cement adhesive as per
section view with MS square tube of 19mm of 19mm
gauge to be inserted inside to give extra structural
strength the price is inclusive of all cost of all
materials labour,T&P etc.complete in all respect as
per direction of the Engineer-in-charge.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
Sl Item Amount in
Unit Quanity Rate in Rs.
57 Providing and laying Ceramic glazed floor tiles of
size 300x300 mm (thickness to be specified by the
manufacturer) of 1st quality conforming to IS : 15622
of approved make in colours such as White, Ivory,
Grey, Fume Red Brown, laid on 20 mm thick cement
mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with sqm 20.00 935.60 18712.00
grey cement slurry @ 3.3 kg/sqm including pointing
the joints with white cement and matching pigment
58 Providing and fixing Ist quality ceramic glazed wall
tiles conforming to IS: 15622 (thickness to be
specified by the manufacturer), of approved make, in
all colours, shades except burgundy, bottle green,
black of any size as approved by Engineer-in-
Charge, in skirting, risers of steps and dados, over sqm 10.00 1063.45 10634.50
12 mm thick bed of cement mortar 1:3 (1 cement : 3
coarse sand) and jointing with grey cement slurry @
3.3kg per sqm, including pointing in white cement
mixed with pigment of matching shade complete.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
PG Departments of History, Political Science, Sanskrit, Sociology & Public Adminstration
Unit Quanity Rate in Rs. Amount in Rs.
1 Dismantling G.I. pipes (external work)
including excavation and refilling trenches
after taking out the pipes, manually/ by
mechanical means including stacking of
pipes within 50 metres lead as per
direction of Engineer-in-charge
15 mm to 40 mm nominal bore Rm 36.00 142.10 5115.60
2 Dismantling aluminium/ Gypsum
partitions, doors, windows, fixed glazing
and false ceiling including disposal of
unserviceable material and stacking of Sqm 18.00 46.50 837.00
serviceable material with in 50 meters lead
as directed by Engineer-in-charge.
3 Providing and fixing white vitreous china
flat back or wall corner type lipped front
urinal basin of 430x260x350 mm and
340x410x265 mm sizes respectively with
automatic flushing cistern with standard
flush pipe and C.P. brass spreaders with
brass unions and G.I clamps complete,
including painting of fittings and brackets,
cutting and making good the walls and
floors wherever required :
One urinal basin with 5 litre white P.V.C.
automatic flushing cistern
4 Providing and fixing white vitreous china
flat back half stall urinal of size
580x380x350 mm with white PVC
automatic flushing cistern, with fittings,
standard size C.P. brass flush pipe,
spreaders with unions and clamps (all in
C.P. brass) with waste fitting as per IS :
2556, C.I. trap with outlet grating and other
couplings in C.P. brass, including painting
of fittings and cutting and making good the
walls and floors wherever required :
Single half stall urinal with 5 litre P.V.C.
automatic flushing cistern
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
Unit Quanity Rate in Rs. Amount in Rs.
5 Providing and fixing one piece
construction white vitreous china squatting
plate with an integral longitudinal flushing
pipe, white P.V.C. automatic flushing
cistern, with fittings, standard size G.I. /
PVC flush pipe for back and front flush
with standard spreader pipes with fittings,
G.I clamps and C.P. brass coupling
complete, including painting of fittings and
cutting and making good the walls and
floors etc. wherever required :
Single squatting plate with 5 litre P.V.C.
automatic flushing cistern
6 Providing and fixing wash basin with C.I.
brackets, 15 mm C.P. brass pillar taps, 32
mm C.P. brass waste of standard pattern,
including painting of fittings and brackets,
cutting and making good the walls
wherever required:
White Vitreous China Wash basin size
550x400 mm with a pair of 15 mm C.P. No 8.00 3158.70 25269.60
brass pillar taps
7 Providing and fixing white vitreous china
water closet squatting pan (Indian type) :
Orissa pattern W.C. pan of size 580x440
8 Providing and fixing P.V.C. low level
flushing cistern with manually controlled
device (handle lever) conforming to IS :
7231, with all fittings and fixtures complete:
10 litre capacity - White No 14.00 1023.05 14322.70
9 Providing and fixing controlled flush, low
level cistern made of vitreous china with all
fittings complete:
10 litre (full flush) capacity-white
10 Providing and fixing white vitreous china
squatting plate urinal with integral rim
longitudinal flush pipe:
11 Providing and fixing white vitreous china
wash basin including making all
connections but excluding the cost of
Flat back wash basin of size 550x400 mm
12 Providing and fixing P.V.C. waste pipe for
sink or wash basin including P.V.C. waste
fittings complete.
Flexible pipe 17.28.2.1 32 mm dia.: No 15.00 104.35 1565.25
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
Unit Quanity Rate in Rs. Amount in Rs.
13 Providing and fixing 600x450 mm beveled
edge mirror of superior glass (of approved
quality) complete with 6 mm thick hard
board ground fixed to wooden cleats with
C.P. brass screws and washers complete.
14 Providing and fixing soil, waste and vent
pipes : 17.35.1 100 mm dia.:
Sand cast iron S&S pipe as per IS: 1729
15 Providing and filling the joints with spun
yarn, cement slurry and cement mortar 1:2
( 1 cement : 2 fine sand) in S.C.I./ C.I.
100 mm dia pipe
16 Providing and fixing M.S. holder-bat
clamps of approved design to Sand Cast
iron/cast iron (spun) pipe embedded in
and including cement concrete blocks
10x10x10 cm of 1:2:4 mix (1 cement : 2
coarse sand : 4 graded stone aggregate
20 mm nominal size), including cost of
cutting holes and making good the walls
For 100 mm dia pipe
17 Providing and fixing bend of required
degree with access door, insertion rubber
washer 3 mm thick, bolts and nuts
complete. 17.38.1 100 mm dia 17.38.1.1
Sand cast iron S&S as per IS - 1729
18 Providing and fixing plain bend of required
degree. 17.39.1 100 mm dia.:
Sand cast iron S&S as per IS - 1729
19 Providing and fixing heel rest sanitary
bend 17.40.1 100 mm dia.:
Sand cast iron S&S as per IS - 1729
20 Providing and fixing single equal plain
junction of required degree with access
door, insertion rubber washer 3 mm thick,
bolts and nuts complete. 17.43.1
Sand cast iron S&S as per IS - 1729
21 Providing and fixing single equal plain
junction of required degree : 17.44.1
Sand cast iron S&S as per IS - 1729
22 Providing and fixing sand cast iron S&S
off sets as per IS: 1729 17.53.1 76 mm off
With 100 mm dia pipe
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
Unit Quanity Rate in Rs. Amount in Rs.
23 Providing lead caulked joints to sand cast
iron/centrifugally cast (spun) iron pipes
and fittings of diameter :
24 Providing and fixing trap of self cleansing
design with screwed down or hinged
grating with or without vent arm complete,
including cost of cutting and making good
the walls and floors :
100 mm inlet and 100 mm outlet
Sand cast iron S&S as per IS: 3989
25 Painting sand cast iron/ centrifugally cast
(spun) iron soil, waste vent pipes and
fittings with two coats of synthetic enamel
paint of any colour such as chocolate grey,
or buff etc. over a coat of primer (of
approved quality) for new work :
100 mm diameter pipe
26 Providing and fixing Chlorinated Polyvinyl
Chloride (CPVC) pipes, having thermal
stability for hot & cold water supply,
including all CPVC plain & brass threaded
fittings, i/c fixing the pipe with clamps at
1.00 m spacing. This includes jointing of
pipes & fittings with one step CPVC
solvent cement and the cost of cutting
chases and making good the same
including testing of joints complete as per
direction of Engineer in Charge.
Concealed work, including cutting chases
and making good the walls etc.
20 mm nominal dia Pipes Rm 80.00 513.75 41100.00
25 mm nominal dia Pipes Rm 80.00 626.05 50084.00
32 mm nominal dia Pipes Rm 120.00 712.75 85530.00
27 Providing and fixing gun metal gate valve
with C.I. wheel of approved quality
(screwed end) :
32 mm nominal bore. No 6.00 589.90 3539.40
40 mm nominal bore No 2.00 707.30 1414.60
28 Providing and fixing ball valve (brass) of
approved quality, High or low pressure,
with plastic floats complete :
25 mm nominal bore No 2.00 399.15 798.30
29 Providing lead caulked joints to spun iron
or C.I. pipes and specials, including testing
of joints but excluding the cost of pig lead :
100 mm diameter pipe
30 Supplying pig lead at site of work.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
Unit Quanity Rate in Rs. Amount in Rs.
31 Providing and fixing C.P. brass bib cock of
approved quality conforming to IS:8931 :
15 mm nominal bore No 12.00 434.20 5210.40
32 Providing and fixing C.P. brass long body
bib cock of approved quality conforming to
IS standards and weighing not less than
15 mm nominal bore each No 12.00 708.40 8500.80
33 Providing and fixing C.P. brass stop cock
(concealed) of standard design and of
approved make conforming to IS:8931.
15 mm nominal bore each
34 Providing and fixing C.P. brass angle
valve for basin mixer and geyser points of
approved quality conforming to IS:8931
15mm nominal bore No 16.00 500.35 8005.60
35 Providing and fixing C.P. Brass extension
nipple (size 15mmx50mm) of approved
make and quality as per direction of
Engineer-in-charge.
36 Cutting holes up to 15x15 cm in R.C.C.
floors and roofs for passing drain pipe etc.
and repairing the hole after insertion of
drain pipe etc. with cement concrete
1:2:4 (1 cement : 2 coarse sand : 4
graded stone aggregate 20 mm nominal
size), including finishing complete so as to
make it leak proof
37 Making chases up to 7.5x7.5 cm in walls
including making good and finishing with
matching surface after housing G.I. pipe
38 Making hole up to 20x20 cm and
embedding pipes up to 150 mm diameter
in masonry and filling with cement concrete
1:3:6 (1 cement : 3 coarse sand: 6 graded
stone aggregate 20 mm nominal size)
including disposal of malba
39 Dismantling old C.I. pipes including
excavation and refilling trenches after
taking out the pipes, breaking lead
caulked joints, melting of lead and making
into blocks, including stacking of pipes at
site lead up to 50 metre:
100 mm diameter C.I. pipe Rm 60.00 340.80 20448.00
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
Unit Quanity Rate in Rs. Amount in Rs.
40 Constructing brick masonry manhole in
cement mortar 1:4 ( 1 cement : 4 coarse
sand ) with R.C.C. top slab with 1:1.5:3
mix (1 cement : 1.5 coarse sand (zone-III)
: 3 graded stone aggregate 20 mm
nominal size), foundation concrete 1:4:8
mix (1 cement : 4 coarse sand (zone-III) :
8 graded stone aggregate 40 mm nominal
size), inside plastering 12 mm thick with
cement mortar 1:3 (1 cement : 3 coarse
sand) finished with floating coat of neat
cement and making channels in cement
concrete 1:2:4 (1 cement : 2 coarse sand :
4 graded stone aggregate 20 mm nominal
size) finished with a floating coat of neat
cement complete as per standard design :
Inside size 90x80 cm and 45 cm deep
including C.I. cover with frame (light duty)
455x610 mm internal dimensions, total
weight of cover and frame to be not less
than 38 kg (weight of cover 23 kg and
weight of frame 15 kg) :
With common burnt clay F.P.S. (non
modular) bricks of class designation 7.5
Inside size 120x90 cm and 90 cm deep
including C.I. cover with frame (medium
duty) 500 mm internal diameter, total
weight of cover and frame to be not less
than 116 kg (weight of cover 58 kg and
weight of frame 58 kg) :
With common burnt clay F.P.S. (non
modular) bricks of class designation 7.5
41 Extra for depth for manholes :
With common burnt clay F.P.S. (non
modular) bricks of class designation 7.5
With common burnt clay F.P.S. (non
modular) bricks of class designation 7.5
42 Providing and fixing in position pre-cast
R.C.C. manhole cover and frame of
required shape and approved quality
Rectangular shape 600x450 mm internal
43 Supplying and fixing C.I. cover 300x300
mm without frame for gully trap (standard
pattern) the weight of cover to be not less
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
Unit Quanity Rate in Rs. Amount in Rs.
44 Making connection of drain or sewer line
with existing manhole including breaking
into and making good the walls, floors with
cement concrete 1:2:4 mix (1 cement : 2
coarse sand : 4 graded stone aggregate
20 mm nominal size) cement plastered on
both sides with cement mortar 1:3 (1
cement : 3 coarse sand), finished with a
floating coat of neat cement and making
necessary channels for the drain etc.
For pipes 100 to 250 mm diameter No 2.00 683.70 1367.40
45 Dismantling of manhole including R.C.C.
top slab, C.I. cover with frame, including
stacking of useful materials near the site
and disposal of unserviceable materials
within 50 m lead as per direction of
Engineer-in-charge:
Rectangular manhole 90x80 cm and 45
Rectangular manhole 120x90 cm and 90
46 Extra for depth of manholes dismantled :
Rectangular manhole 90x80 cm and
beyond 45 cm depth
Rectangular manhole 120x90 cm and
beyond 90 cm depth
47 Constructing brick masonry road gully
chamber 50x45x60 cm with bricks in
cement mortar 1:4 (1 cement : 4 coarse
sand) including 500x450 mm pre-cast
R.C.C. horizontal grating with frame
complete as per standard design :
With common burnt clay F.P.S. (non
modular) bricks of class designation 7.5
48 Constructing brick masonry road gully
chamber 45x45x77.5 cm with bricks in
cement mortar 1:4 (1 cement : 4 coarse
sand ) with precast R.C.C. vertical grating
complete as per standard design : 19.28.1
With common burnt clay F.P.S. (non
modular) bricks of class designation 7.5
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.12.29
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
NIT88.pdf
Tender Document
BOQ.pdf
Tender Document
GCC Contracting PMC2022.pdf
Tender Document
SCC.pdf
Tender Document
MAKE LIST UTKAL UNIVERSITY.pdf
Tender Document
Physical Milestone.pdf
Tender Document
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .