Improvement works to R9_5 R10_11 R10_12 R12_12 R13_5 and R13_10 Quarters at Vallur camp

Amount

Plastering the wall/ceiling in cm 1:3 mix 12mm thick over brick wall / concrete surface after removing the peel off/ damaged plaster surface as directed at site including the cost of all materials, labour, lead, lift, T&P etc., complete.

Providing and fixing of door flush type (single leaf) with factory made shutters using 25 mm particle board as per IS 3087/1985 with b-type T.W beading bonded with water resisting adhesive fixed to C.W door frame of size 100 x 65 mm and fully threaded GI screw as per ISO 1003/1977 and with following fixtures for door. 6 nos iron hold fast of size 230 x 5 x 50 mm, 3 nos oxidised iron but hines 100 mm size, 2 nos 200 x 12 mm anodises aluminium tower bolts, 1 no 250 x 16 mm anodised aluminium aldrop, 1 no rubber bush, 1 no wire stopper, 2 no anodised aluminium handles of size 150mm, 1 no chromium plated internal locking arrangement of approved quality.

Providing and laying and jointing PVC pipes (having working pressure 10kg. / sq.cm) including cutting, threading and fixing PVC specials with necessary clamps, scaffolding including cost of material, labour, lead, lift, T&P etc., complete as directed by the Engineer at site. a.25 mm dia PVC pipeline

b. 32 mm dia PVC pipeline

Providing, laying and jointing 63mm dia PVC pipes (having working pressure 6 kg/sq, cm) of cutting, threading and fixing PVC specials with necessary clamps, scaffolding including cost of materials, labour ,lead, lift, T&P etc, complete as directed by the Engineer at site.

Providing, laying and jointing 110mm dia PVC pipes (having working pressure 6 kg/sq, cm) of cutting, threading and fixing PVC specials with necessary clamps, scaffolding including cost of materials, labour ,lead, lift, T&P etc, complete as directed by the Engineer at site

Providing & Fixing in position 15mm dia CP Tap of approved make & quality conforming to IS Specification including cost of all materials, labour, lead, lift, etc., complete as directed by the engineer at site

Providing and Paving of Design Ceramic Tiles of approved make and colour over a base layer of CM 1:3, 20mm thick and pointed with same coloured cement

Providing and fixing up CP Shower rose and Cp angle valve of standard quality with necessary specials. Labour charges etc, complete.

Removing and refixing of aluminium window glazed shutters after replacement of damaged aluminium hinches with new hinches including cost of hinches, and labour charges, etc., complete.

Providing and fixing of Granite slabs of size 4' x 2' (Black Colour) and above 18mm to 20mm thick for kitchen cabinet top with a bed of 20mm thick cement mortar 1:3 including all materials, polishing, labour, lead, lift, etc., complete.

Providing and fixing in position IWC of size 580mm x 440mm, with approved colour and make, white glazed earthenware 'P' or 'S' trap with sand cushion and forming flooring around the closet using lime concrete 100mm thick and finishing the top with required slope without leakage, etc., complete..

Providing ornamental grills for window casing 20 x 5 mm Ms Flats as shown in the drawing and fixing in position, including the cost of all materials, labour, lead , lift, T&P etc., and as directed by the Engineer at the site.

Providing and fixing in position of colour PVC door of sintex or equalent make and shutters frame with size 58mm x 15mm and thickness not less than 1.00mm and shutter multipanelling of size 20mm x 20mm of thickness not less than 1mm and door frame of size 48mm x 40mm thickness of 1mm, including cost of tongue and fasteners MS hold fast, anodized aluminium hinges, tower bolt, handle etc., complete (Colour and pattern of door will be as approved by the department Engineer)

Providing wash hand basin of size 550mmx400mm with all accessories such as cast iron brakets, 32mm dia CP waste coupling, rubber plug and chain, 32mm dia ‘B’ class G.I. waste pipe, 15mm dia G.I. wheel valve, 15mm dia nylon connection, 15mm dia brass nipples, 15mm CP pillar tap, etc., complete.

Providing and fixing of 1200mm (48”) sweep AC Ceiling fan complete with regulator with 300mm down rod on the existing clamp. Retired materials will be devoluted to store.

Providing and fixing of single box type 4’40W flu fitting complete with copper choke and condenser with TW round block on wall or ceiling with flu. Tube with PVC unsheathed leads from terminals to the fitting.

Painting one coats with Oil Bound Distemper of first class quality paint and of approved colour, including thorough scrapping clean removal of dirt, etc., complete and including plaster of pairs, putty wherever required.

Painting one coat with ready mixed enamel paint of approved quality over the wooden surface including scrapping clean removal of dirt labour charges, cost of paint etc., complete.

Painting the ornamental M.S grill works with one coat of enamel paint including cost of all materials, labour, lead, lift, etc., complete as directed by the engineer at site.

C Maria Cross