Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹2.3 LAccepted-AOC 130 SEC 40 A CHANDIGARH | ₹2.3 L | L-1 | Accepted-AOC Allotment |
| 2 | L-2₹2.8 LRejected-Finance 105 B TOP FLOOR MOTIA CITY ZIRAKPUR 140603 PB | S A S NAGAR | PUNJAB | 140603 | ₹2.8 L | L-2 | Rejected-Finance due to higher |
| 3 | L-3₹2.8 LRejected-Finance PLOT NO 691 INDL PHASE II CHANDIGARH | ₹2.8 L | L-3 | Rejected-Finance due to higher |
| 4 | L-4₹3.0 LRejected-Finance CHANDIGARH | CHANDIGARH | CHANDIGARH | 160001 | ₹3.0 L | L-4 | Rejected-Finance due to higher |
Tender Value
₹4.5 L
EMD Value
₹9,020
Closing Date
23 Jan 2026, 11:00 amClosed
Executive Engineer, C.P. Division No.4, Chandigarh
Executive Engineer, C.P. Division No.4, Chandigarh
S/R of N/R/B Govt. Model High School, Sector-38D, Chandigarh for the financial year 2025-2026.
2026_CHD_90105_1
CP4/2026/2531531
Open Tender
Civil Works
240 days
S/R of N/R/B Govt. Model High School, Sector-38D
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹9,020
5 Feb 2026
16 Jan 2026
23 Jan 2026
16 Jan 2026
23 Jan 2026
16 Jan 2026
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. (As per DSR 2.8.1)
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :, 1:5:10 (1 cement : 5 coarse sand (zone-Ill) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources). (As per DSR 4.1.10)
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) (As per DSR 6.1.1)
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (As per DSR 8.31)
Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. (As per DSR 10.31)
Providing and fixing ISI marked, IS : 1341, M.S. heavy weight bright finished butt hinges with necessary screws etc. complete : 125x90x4.00 mm (As per DSR 9.56.1)
75x60x3.10 mm (As per DSR 9.56.3)
Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete : (copper oxidized as per IS: 1378) 150 mm (As per DSR 9.67.1)
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. (As per DSR 9.83)
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm (As per DSR 9.96.1)
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 200x10 mm (As per DSR 9.97.3)
150x10 mm (As per DSR 9.97.4)
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm (As per DSR 9.100.1)
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper (As per DSR 9.101.2)
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (As per DSR 10.2)
Welding by gas or electric plant including transportation of plant at site etc. complete. (As per DSR 10.22)
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate. (As per DSR 11.3.1)
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick (As per DSR 11.26.1)
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. (As per DSR 11.27)
15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand) (As per DSR 13.2.1)
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work (As per DSR 13.99.1)
Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) (As per DSR 14.5.1)
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) (As per DSR 15.2.2)
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. (As per DSR 15.56)
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. (As per DSR 15.60)
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board in existing steel frames well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 25 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. (N.S.)
Providing and applying cement based putty (Birla, Jk or equivalent) to the required finish complete in all respect and to the entire satisfaction of Engineer-in-charge. (N.S.)
Cleaning of red sand stone floors and skirting with grinding machine and polishing the floor include machine charges and Filing the Gaps/Grooves with pigment added White Cement complete in all respects and to the entire satisfaction of the Engineer in charge. (N.S.)
P/F 110 mm internal dia PVC pipe as rain water pipe on walls of 6kg./sqm, pressure with Bend, Elbow and Clamps complete in all respect to the satisfaction to the Engineer-in-charge. (N.S.)
Providing water proofing treatment by laying one coat of cement adhesive Tapecrete mixed with cement in ratio 1:2 (One part of tapecrete : 2 part of cement) complete in all respect and to the entire satisfaction of Engineer-in-charge. (N.S.)
Please Enable Macros to View BoQ information
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.16 MB
BOQ_110197.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid