Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.6 LAccepted-Finance G 2 BIDHAN NAGAR P O MIDNAPUR P S KOTWALI DIST PASCHIM MEDINIPUR PIN 721101 | MIDNAPUR | PASCHIM MEDINIPUR | WEST BENGAL | 721101 | ₹9.6 L | L1 | Accepted-Finance Lowest Bidder |
| 2 | L2₹9.7 LRejected-Finance | ₹9.7 L | L2 | Rejected-Finance Higher Bidder |
| 3 | L3₹9.7 LRejected-Finance | ₹9.7 L | L3 | Rejected-Finance Higher Bidder |
| 4 | Rejected-Technical 131 NILMONI BHATTACHARJEE LANE KADAL BERHAMPORE MURSHIDABAD W B PIN 742102 | BERHAMPORE | MURSHIDABAD | WEST BENGAL | 742102 | - | - | Rejected-Technical Shortfall compliance not given. |
Tender Value
₹9.8 L
EMD Value
₹19,567
Closing Date
16 Jan 2026, 1:00 pmClosed
Executive Engineer Paschim Med. Elecl. Div. PWDte.
Office of the Executive Engineer, Paschim Medinipur Electrical Division, P.W.Dte., Midnapore, Paschim Medinipur.
Electrical Installation work for setting up of permanent VWDC (Vulnerable Witness Deposition Centres) in the Kharagpur Sub-Divisional Court, Kharagpur, Paschim Medinipur.
2025_WBPWD_979608_1
WBPWD/EE/PMED/NIT-08/e-T /2025-2026
Open Tender
ELECTRICAL WORKS ORG
30 days
kharagpur, Paschim Medinipur.
Please refer Tender documents.
3 documents required · 3 mandatory
₹19,567
13 Feb 2026
26 Dec 2025
19 Jan 2026
26 Dec 2025
16 Jan 2026
26 Dec 2025
For Internal E.I. Work Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate flushed in wall incl. mending good damages to original finish. Average run 8 mtr.
Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 6A 5 pin plug point incl. S&F 240 V 6A 3 pin Modular type plug socket & Modular type switch (Brand approved by EIC) incl. S&F earth continuity wire, fixed on 4 Module GI switch board with 3/4 Module top cover plate flushed in wall incl. mending good damages to original finish. 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC. On Board.
Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.
Supply & Fixing 240 V, 4 nos. 6 A, 3 pin Modular type plug socket with 4 nos. 6A Modular type switch (Brand approved by EIC), 16A Modular switch type MCB (C-Curve) and Indicator without plug top on 2 row 18 Module GI Modular type switch board with 2 row 18 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.
Supply & Fixing 240 V, 6 A, 3 pin Modular type plug socket (Brand approved by EIC) with 6A Modular type switch, without plug top on 4 Module GI Modular type switch board with 3 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.
Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc.
Supply & Fixing 240 V,25 A, 3 pin Modular type plug top with indicator (Brand approved by EIC) & necy. Connections.
Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.
Cutting Channel of size (40 mm x 40 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 19 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles. (a) 19 mm dia 3 mm thick polythene pipe without earth continuity wire
Supplying & Fixing 150 mm x 100 mm x 65 mm sheet metal inspection box (16 SWG) of the following sizes flushed in wall by housing the same after cutting brick wall incl. making earthing attachment, painting and mending good damages to building works
Supply & Fixing bakelite / perspex top cover on existing Inspection board by Brass screws (a) 150 mm x 100 mm x 65 mm
Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand Appr. by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required.
a) 2 x 1.5 sqmm +1x1.5sqmm as ECC . ( For 5 A Power Plug )
b) 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC [computer Board and Power Plug]
c) 2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC [For AC & Others]
Supply and delivery of following 1.1 KV Gr., XLPE insulated armoured Al cables (Make- Polycab/ Havells/ Gloster/ RR kable)
a) 4 core 35 sq.mm [Panel to TPNDB]
Laying of 4core 35 sqmm cable in underground trench 460mm wide x 760mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trenchwith shifted soil, leveling up and restoring surface duly rammed.
Laying of 4 core 35 sq.mm cable after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish.
Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below :
a) 4 core 35 sq.mm
Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :
a) 4 core 35 sq.mm
Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes
a) 2.5 sqmm.
b) 4 sq. mm.
c) 6 sq. mm.
Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.
a) 6 way Enclosure (Make:Seimens/ Legrand /Schneider).
Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.
a) 2+12 way Enclosure (Make:Seimens/ Legrand /Schneider).
Supplying and fixing 240/415V MCB Isolator on din rail of existing DBs and necessary connection.
a) 63 A FP MCB (Make:Seimens/ Legrand /Schneider).
b) 40 A DP MCB (Make:Seimens/ Legrand /Schneider).
Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection.
a) 6-32A SP MCB (Make:Seimens/ Legrand /Schneider).
Supply & Delivery 250 volt. 4 Ft. Long t LED tube fittings with LED tube complete with all accessories (Make- Wirpo/ Crompton/ Bajaj).
i) Make- Wipro, Cat no- WIO921208P with 01 nos Polycarbonate LED tube cat no- LL13-181-65SESL1G1.
ii) Make- Wipro, Cat no- WIO922208 with 02 nos Polycarbonate LED tube cat no- LL13-181-65SESL1G1.
Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.
S & Delivery of 240V 50 Hz 48" sweep (1200 mm) ceiling fan complete with down rod, Canopy, fork etc. (Make- Orient- summer breeze/ Crompton/ Usha).
Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible coppe wire.
S&F of Box type fan clamp of 150mm dia & 80mm depth made of 16 SWG CRCA sheet incl. S&F 12mm dia 600mm long MS rod duly bent as per GS.
Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. making necy. connections etc as per G.S.
S&D 250V. 50 Hz. 9 inchi Sweep 920 r.p.m. Heavy Duty AC Exhaust Fan (As per EPC make)
Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter:
Supply & Fixing Al louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long)
a) 23 cm Exhaust fan (9")
Supplying & Fixing 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl. S&F HW board.
S&F of 230 V. 9 W LED bulb (Make- Philips/ Bajaj/ crompton)
S&F of 9W LED Mirror light fittings on wall incl. necy connection as per GS. (Philips/ CG)
S & F of 230V, 9W LED single Wall braket fittings, fixing on wall with necessary arrangement. Appr. Make
Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By ISI-Medium GI pipe
Excavation of soil for installation of Earth Electrode and filling & ramming. For Morrum Soil
Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required.
Connecting the equipments to earth busbar including S & F 4SWG GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages.
E.I. work for UPS Cutting Channel of size (40 mm x 40 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 19 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles. (a) 19 mm dia 3 mm thick polythene pipe without earth continuity wire
Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand Appr. by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required. a) 2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC
Supplying & Fixing Industrial Plug & Socket board with 240V, 40A, SPN & Earth Metal Industrial Plug socket & 32A Industrial top incl. S & F 40 A DP MCB breaking capcity 10kA (C- Curve) in SS enclosure fixed on wall and cecessary conection. (Make- L&T/ ABB/ Siemens)
Supplying and fixing 2way MCB SS enclosure with IP-20/30 protection, powder coated provision for two pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment incl. S&F of 40A DP MCB type Changeover Switch. (Make- Havells/ L&T/ HPL)
S & F of Glow Sign Board(8 ft x 4 ft x 6inch depth) made from 40x40x5mm MS angl, 40x5mm MS flat having the provision for opening from front by 25x25x5mm MS angle, 3 nos hinges duly welded. The board should be enclosed from out side by 20 SWG GI SHEET except the front. The entire board should be painted with one coat of synthetic enamel paint over one coat of RO primer. The front facia of the board is to be made with 2mm thk White PVC sheet of export quality having suitable size and to be fixed on the front structure by S & F suitable size aluminium angle, SS Screws. The matter is to be incripted on a whole best quality venyle sheet as per approved size, colour & matter which will be pasted properly over the PVC sheet. S & F of 8 (eight) nos 4ft 20w LED tube (Philips) including tube light holder, tube light pin holder & entire connection with 3x1.5 sq. mm stranded copper wire through flexible PVC pipe for proper illumination of the GSB from inside as per direction of EIC. (Matter should be incripted in BENGALI for 1no Board and in ENGLISH for the other)
Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required. A) 2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC
E.I. work for Compound Light Supply & Erection of 3" dia. 2 mtr. long heavy gauge G.I. Pipe (Minipole) having 9" x 9" x 1/2" M.S. sole plate welded with drilled hole at bottom of the pole to be installed on roof of building with S & F grounding bolts incl. providing CC (6:3:1) base block (around the pole) dimension 0.60 x 0.60 x 0.76 mtr. above ground level, neatly cemented finish (3 mm thick), at the base pole (in lieu of CC muffing) suitable for alkathene / polythene pipe entry as directed for street light wiring incl. supply & fixing 50 mm dia. 1.5 mtr. long detachable type G.I. Single arm bracket suitable for the pole head. The arm brfacket shall be properly welded with 5 mm. thick stifner plate of pole sleeve for strengthening including properly fixing arrangement with the pole by bolt, nut, washers with painting by 2 coat of aluminium paint as per direction of E.I.C.
Supply & Delivery of 2 core 10 Sq.mm. 1.1 KV Gr. XLPE insulated as per IS -7098 (Part -1) 1988 armoured sheathed Aluminium conductor cable. (Make :- Havells / Polycab / RR Kabel).
Supply & Fixing of 240 V, 70Watt LED street light fittings complete with all accessories street light with IP-66 protection having 10 KV SPD included. Efficacy should be > 110/120 LPW. (Crompton Cat. No. - TRP-409-70-57-SL-GL-NSG/ Philips / Wipro) as per direction of E.I.C.
Laying of cable upto 2 core 10 Sq.mm. on wall / surface incl. S & F MS saddles with earthing attachment in 6 SWG G.I. (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting.
S & F 40 mm dia. medium gauge G.I. Pipe for protection (ISI - Medium) with necessary fittings and jointing materials as required.
S & F compression type brass cable gland complete with brass gland, brass ring & rubber ring for dust & moisture proof entryof XLPE / PVC armoured cable incl Finishing the end of the XLPE / PVC armoured cableas by crimping method incl. S & F solderless socket (Dowels make), tapes, anticorrosive paste & joniting materials. a) 2 core 10 Sq.mm.
Interconnection of LED fittings by 2 x 1.5 Sq.mm. PVC insulated copper wire from loop box with best quality 13 mm dia 3 mm thick PVC pipes as per direction of EIC.
Supplying & Fixing G.I. waterproof type looping cable box size 200 x 150 x 100 mm deep having 4 mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2 core 16 sq.mm. PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S & F 40 x 6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint.
S & F 240V 25A Timer controller for compound light in SS double door 8-way DB enclosure (Make :- L&T, enclosure Cat. No. - DBSPN012DD or equivalent) with S & F following electrical accessories & front door locking arrangement with all connection by finishing the ends of 2 x 4 & 1 x 2.5 copper wire dowells solderless socket by crimping method as to GS earthing attachment on wall incl. necessary connections as per direction of EIC:- i) 20A DPMCB. (Make :- L&T, Cat. No. - B20250C) --- 1 No. ii) 24 Hr. programmable Digital / Analog Timer. (Make :- L&T, Cat. No. - 67DDT0) --- 1 No. iii) 2 pole 40A power contactor. (Make :- L&T, Cat. No. - MNX 22/230V) with 1 NO + NC additional contact block --- 1 No. iv) On, Off push button -- 2 Nos. (Make :- L&T / ABB) --- 1 No. vi) 2A Auto-Off-Bypass SPDT toggle switch. (Make :- Approved / Reputed) --- 1 No. viii) Outgoing connector make ELMAX. (Make :- Approved / Reputed) --- 1 No.
SITC Of UPS SITC of 6 KVA 1-ɸ / 1-ɸ True Online Double Conversion IGBT based UPS system with Advanced DSP based Technology having minimum output power factor 0.9 with 415V Single phase input & 240V single phase output and following minimum accessories. [Make :- VERTIV Liebert ITA 6KVA / NUMERIC make Digital HP MAX 6KVA / APC Model No. SRC6UXI with additional Isolation Transformer] a) in built/ External isolation Transformer b) Suitable size Battery rack c) Total minimum 8064VAH SMF battery for each UPS to provide 30 mins. Battery backup at Full load. (Make :- Amararaja Quanta / Exide Power Safe)
S.I.T.C Air Conditioning Supply & delivery of non-inverter, fixed speed room Air conditioner fitted with rotary compressor and copper condensing and cooling coil having following major specification. Refrigerant - R410A/R32 Capacitor type - P2 Minimum Cooling Capacity(KW) : 6.6 or higher Maximum power consumption : 1850 watts or less EER star rating : 3.57/3.88(2/3 star/2023) or heigher as per recent year manufacturer. Minimum Tonnage required : 1.9/2.0 TR or higher with other modern features. Minimum room discharge air flow(CFM) : 777 or higher & energy efficient type, with approved make as per IS 1391, Part -I, with remote and all the necessary connection etc. as per direction of EIC. (Make - Mitsubishi Electric) [Make- Mitsubishi Electric - MS/MU-GK24VA/ MS/MU-AGZ24VF/ O General]
Installation,Commissioning and testing of 2.0/1.5 ton split type AC machine both indoor/outdoor including fixing of 40 x 40 x 5 mm MS angle iron frame and mending good the damages.
Supply and Fixing of (i) Copper pipe 3/8"/1/2" for liquid as required. (ii) Copper pipe 5/8" / 1/4"for suction as required (iii) Insulation Foam 3/8" / 1/2" for liquid as required. (iv) Insulation Foam 5/8" / 1/4"for suction as required. (v) S & laying of 3 / 4 core 2.5 sqmm 1.1kv grade XLPE insulated round flexible copper cable, Length as required for operation of the machine. (Make:- Havells/ Gloster/ KEI/ carrency)
PVC Drain pipe for drainage of water for Split A.C. both indoor unit.
S & F of 32 mm UPVC hard Drain pipe for drainage of water for AC Machine.
Add GST @ 18% on Item no 1 to 60
Add CESS @ 1% on Item no 1 to 61
Please Enable Macros to View BoQ information
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.96 MB
BOQ_2387989.xls
BOQ • 0.38 MB
2911.pdf
Tender Documents • 0.50 MB
Download all tender documents and submit your bid