Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹51.9 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹57.8 L+₹5.9 L (11.3%)Rejected-Finance | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹68.5 L+₹16.5 L (31.8%)Rejected-Finance FLAT NO 104 SAI VIHAR APARTMENT A WING INFRONT OF NASIK HOSPITAL KATHE GALLI NASIK 422 011 | NASIK | NASHIK | MAHARASHTRA | 422011 | L3 | Rejected-Finance Being L3 |
Tender Value
₹77 L
EMD Value
₹1.4 L
Closing Date
1 Nov 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE AF NAGPUR
HQ CWE AF NAGPUR VAYUSENA NAGAR, NAGPUR 440007 MILITARY ENGINEER SERVICES
RESURFACING OF PARADE GROUND AND HARD STANDING AT 11 BRD
2024_MES_676898_1
80648
Open Tender
Civil Works - Roads
Item Rate
180 days
GE AF OJHAR
Please refer Tender documents.
9 documents required · 9 mandatory
₹1,000
GE (AF) Ojhar
₹1.4 L
Yes
7 Dec 2024
27 Sept 2024
4 Nov 2024
27 Sept 2024
1 Nov 2024
18 Oct 2024
Amount
Material and labour for repair to pot holes depth not exc 30 mm and area not exceeding 1.00 sqm each including sweeping in free from dust and mud or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened and graded road metal, watering and well ramming (including supply of road metal) and by applying tack coat with bitumen primer @ 5 kg per 10 sq m putting in premixed bituminous macadam well rammed and sealed with binder 6.8 kg per 10 sqm, blinded with 0.06 cum of sand ) again well rammed (including supply of premixed macadam, sand) complete all as specified and directed.
Material and labour for preparing black top surface by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with mechanical air compressor to remove all loose dirt etc., complete all as specified and directed.
Material and labour for applying tack coat with bituminous primer @ 5kg/10Sqm of paving bitumen of grade VG-10 over bituminous macadam surfaces all as specified.complete all as specified and directed.
Material and labour for repairs to unleveled surfaces, depression, road side cuts etc., by filling premixed bituminous macadam using VG-40 paving bitumen @ 4% by weight to total mix in unleveled surfaces, depression, road side cuts etc .laid, rolled and compacted to required gradient and camber with 8 to 10 tone power roller (consolidated thickness of 75 mm or less) and laid by mechanical paver complete all as specified and directed Note:- The rates to be worked out by the contractor for quoting their rate for this item is on the basis of binder content of 4% of the total mix by weight. At the time of actual design mix for the bitumen content more than the specified percentage contractor shall not be reimbursed any extra cost and bitumen content less than the specified percentage then rate shall be adjusted on minus side based on prevailing rate of bitumen.
Material and labour Bituminous pre-mixed semi dense asphaltic concrete 40 mm consolidated thickness with 5.5 % (Bitumen grade VG-40) binder content by weight of total mix using paving bitumen of VG-40 penetration (using computerized hot mix plant and mechanical paver) and OPC-43 grade as a filler material compacted to required camber and gradient using vibratory power roller complete all as specified and directed. Note:- (i) The rates to be worked out by the contractor for quoting their rate for this item is on the basis of binder content of 5.5% of the total mix by weight. At the time of actual design mix for the bitumen content more than the specified percentage contractor shall not be reimbursed any extra cost and bitumen content less than the specified percentage then rate shall be adjusted on minus side based on prevailing rate of bitumen.
Material and labour for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as pecified and directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) and disposal off debris complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises, complete all as specified and directed.
Material and labour for 75mm thick Cement Concrete 1:4:8 type D2 using 40 mm graded stone aggregate as in sub base of floor / hardstanding / paving finishing cement concrete surface fair and even complete all as specified and directed.
Material and labour for rendering 10 mm thick in CM 1:4 over brick surfaces, finished even and smooth without using extra cement all as specified and directed.
Material and labour for Granite (of any colour or any grains as approved by GE) work, best quality, 20 mm thick table rubbed and polished as in steps jambs, pillers, window cills, cooking platform and similar works including pointing in white cement using 1:2 using marble dust and admixture of pigments to match with the shade of granite over and including 15mm thick screed bed in CM 1:6 for laying granite all as specified and directed. Note : Granite shall be provided one piece except of cooking platform which shall be of full width as per site including full moulding of exposed edges with polishing. The back surface of granite shall be made rough by sprinkling small pebbles using adhesive for bonding with bedding layer.
Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.
Removing excavated soil to a distance exceeding 1.5 Km but not exceeding 5 Km and depositing where directed complete all as specified and directed.
Material and labour for 75 mm thick, moorum/red bajri as in berms spread, rolled and consolidated to gradient and camber required complete all as specified and directed.
SANJAY B SHARMA (BID ID -3143561)
M/S K.K.BINNAR (BID ID -3146841)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .