Constt. Of Cremination Shed Near Revir Chaneb

Amount

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. A). All kinds of soils

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering .All work up to plinth level . 1:5:10 ( 1 cement :5 fine sand :10 graded stone aggregate 40 mm nominal size ) Nallah.

P L of 1:1.5:3 (1 Cement : 1.5 coarse sand :3 graded crushed stone aggregate 20 mm nominal size),

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering .All work up to plinth level . 1:3:6 ( 1 cement :3 fine sand :6 graded stone aggregate 20 mm nominal size ) 20% boulder.

Dry boulder stone filling layed on horizontal surface

Reinforcement for RCC work including straightening,cutting bending, placing in position and binding all complete upto plinth level Thermo Mechanical Treated bars.

Centering and shuttering including strutting, propping etc. and removal of formwork for Foundations, footings, bases of columns, etc.

Steel work welded in built up sections/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required

Providing corrugated G.S- Sheet roofing incl. vertical/curved surfaces fixed with polymer coated J or L hooks & nuts 8 mm dia with bitumen & G.I limpet wahser or with G.I limpet wahsers filled with white lead & incl a coat of approved steel primer & 2 coats of approved paint on over lapping of sheets complete ( upto any pitch ) in horizontal / curved surfaces excl. the cost of purlins, raften, & trusses and incl. cutting to size and shape whereever req.0.63 mm thick with zinc coating not less than 275 gm/sqm.

Providing ridges or hips of width 60 cm over all width in plains G.S sheets fixed with polymer coated J or L hooks bolts & nuts 8 mm dia G.I lempet & bitumen washers complete. 0.63 mm thick with zinc coating not less than 275gm/sqm.

Cement concrete flooring 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone agg. )finished with a floating coat of neat cement including cement slurry,but excluding the cost nosing of steps etc complete.40 thick with 20 mm nominal size stone agg. Crushed

IQBAL AHMED