Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹161.1 CrAccepted-AOC B 22 2ND FLOOR HIMALAYA HOUSE 23 K G MARG CANNAUGHT PLACE NEW DELHI 110 001 | NEW DELHI | DELHI | 110001 | ₹161.1 Cr | L1 | Accepted-AOC L1 bidder |
| 2 | L2₹162.3 CrRejected-Finance | ₹162.3 Cr | L2 | Rejected-Finance Higher bid value |
Tender Value
Refer Docs
Closing Date
11 Jan 2022, 4:00 pmClosed
Mr. T. S. Bharadwaj, tkIS
thyssenkrupp Industrial Solutions (India) Private Limited, Uhde House, L. B. S. Marg, Vikhroli West, Mumbai, India-400083,
Mechanical, Piping, Painting and Insulation Works for 5th Stream Alumina Plant at Damanjodi, Odisha and Related Facilities at Vishakhapatnam Port
2021_NALCO_661897_1
6695-CMG-G00-CA-0032
Open Tender
Machineries/ Mechanical Engg Items
517 days
Damanjodi
As per NIT
2 documents required · 2 mandatory
₹0
Exempted
17/12/2021, 11AM, Mumbai
1 Aug 2023
8 Dec 2021
12 Jan 2022
8 Dec 2021
11 Jan 2022
27 Dec 2021
8 Dec 2021 - 15 Dec 2021
17 Dec 2021
Amount
DAMANJODI SITE
SECTION 1
Item No.: 1 INSTALLATION OF EQUIPMENT
Item No.: 1.1 Installation of static equipment supplied in single piece .For detailed work Item description refer (sl no 1.1 section 1 of Annexure-I SP1A)
Item No.: 1.1.1 Erection of equipments weights up to 50 Tons
Item No.: 1.1.2 Erection of equipments weights above 50Tons & upto100 Tons
Item No.: 1.2 Installation of static equipment supplied in two pieces.For detailed work Item description refer (sl no 1.2 section 1 of Annexure-I SP1A)
Item No.: 1.2.1 Assembly, Installation of Static Equipment (Supplied in pieces)- Fit-up, welding and pressure testing of equipment by equipment vendor (including supply of consumable & requisite manpower) and all other assistance by contractor. (Digestor: Tag No. 03PV-5004A/B/C/D/E/F) Assistance for field welding of equipment supplied in pieces where Main lifting and trailing crane including assembly, erection, erection engineering and erection crew will in contractor's scope and field fit-up, welding & testing shall be carried out by equipment vendor. For detailed work Item description refer (sl no 1.2.1 section 1 of Annexure-I SP1A). Welding of eight number Cleats (cleats will be supplied by equipment vendor) per digestor after erection of equipment for platform supports as per specification/drawing including consumable, manpower, equipment etc. all complete as per instruction of Engineer-In-Charge.
Item No.: 1.2.3 Assembly (bolted connection), Installation of Static Equipment : weights up to 50 Tons (INDIRECT BAUXITE MILL SLURRY HEATER: 02HE-5003A/B/C/D) For detailed work Item description refer (sl no 1.2.3 section 1 of Annexure-I SP1A)
Item No.: 1.6 Installation of Rotary equipments like pumps,agitators etc. For detailed work Item description refer (sl no 1.6 section 1 of Annexure-I SP1A)
Item No.: 1.6.1 Erection of equipments
Item No.: 1.7 Installation of Package equipments like Air Compressor Package, Air Drying Unit, CGM Dosing Package, Anti-Foam Dosing Package, Anti-Foam Dosing Package for seed tanks , Defoamer / Inhibitor Package and LRVP - Caustic Wagon Unloading system evacuation, Disc Filter, Scalping/product fiter, security filter etc. For detailed work Item description refer (sl no 1.7 section 1 of Annexure-I SP1A)
Item No.: 1.7.1 Erection of package units
Item No.: 1.7.1.1 Air Compressor Package
Item No.: 1.7.1.2 Air Drying Unit
Item No.: 1.7.1.3 CGM Dosing Package
Item No.: 1.7.1.4 Anti-Foam Dosing Package
Item No.: 1.7.1.5 Defoamer / Inhibitor Package
Item No.: 1.7.1.6 LRVP - Caustic Wagon Unloading system evacuation
Item No.: 1.7.1.7 Disc filter
Item No.: 1.7.1.8 Scalping / Product Cyclone
Item No.: 1.7.1.9 Security Filter
Item No.: 1.7.1.10 Oily Water Separator(CPI Separator)
Item No.: 1.8 Installation of EOT Cranes/Hoist/Chain Pulley Blocks For detailed work Item description refer (sl no 1.8 section 1 of Annexure-I SP1A)
Item No.: 1.8.1 EOT Cranes , Capacity -up to 50 Tons
Item No.: 1.8.2 EOT Hoists - Capacity up to 30 Tons
Item No.: 1.8.3 Chain Pulley blocks - Capacity up to 10 Tons
Item No.: 1.9 Installation of safety shower/ sample cooler/ sample bomb For detailed work Item description refer (sl no 1.9 section 1 of Annexure-I SP1A)
Item No.: 1.9.1 Safety shower
Item No.: 1.11 Supply and application of grouting material for Static/Rotary/Package equipments. For detailed work Item description refer (sl no 1.11 section 1 of Annexure-I SP1A)
Item No.: 1.11.1 Type: Fosroc conbextra GP1 or equivalent.
Item No.: 1.11.2 Type : Fosroc conbextra GP2 or equivalent.
Item No.: 1.11.3 Type: M 40 Concrete (cement:sand: grit-1:1:1)
Item No.: 1.11.4 Type : Epoxy grout
Item No.: 1.16 Modification on existing Caustic Soda Siphoning vessel and it’s Saddle Modification of two nozzles (Nozzle ~250 mm to ~ 400 mm) and reduction of saddle height. For detailed work Item description refer (Sl.No.-1.16 section 1 of Annexure-I SP1A)
SECTION 2
Item No.: 2 ABOVE GROUND PIPING WORKS
Item No.: 2.1 Fabrication and Installation of A/G piping works. For detailed work Item description refer (sl no 2.1 section 2 of Annexure-I SP1A).
Item No.: 2.1.1 Carbon steel pipe Non IBR - All grade and specifications including (NACE,H2services) For detailed work Item description refer (sl no 2.1.1 section 2 of Annexure-I SP1A)
Item No.: 2.1.1.1 Welding (Shop)
Item No.: 2.1.1.1.3 Butt Weld Upto 10mm Thk
Item No.: 2.1.1.1.4 Butt Weld > 10 mm thk and up to 20 mm thk
Item No.: 2.1.1.2 Welding (Field / Position)
Item No.: 2.1.1.2.1 Socket Weld - For All Thickness
Item No.: 2.1.1.2.2 Butt Weld Upto 10mm Thk Small Bore
Item No.: 2.1.1.2.3 Butt Weld Upto 10mm Thk
Item No.: 2.1.1.2.4 Butt Weld > 10 mm thk and up to 20 mm thk
Item No.: 2.1.1.2.5 Erection, Alignment, Supporting, Providing identification band, Flushing, Pressure Testing, Drying, pre-commissioning activities etc,
Item No.: 2.1.2 Carbon steel pipe IBR - All grade and specifications For detailed work Item description refer (sl no 2.1.2 section 2 of Annexure-I SP1A)
Item No.: 2.1.2.1 Welding (Shop)
Item No.: 2.1.2.1.3 Butt Weld Upto 10mm Thk
Item No.: 2.1.2.1.4 Butt Weld > 10 mm thk and up to 20 mm thk
Item No.: 2.1.2.2 Welding (Field / Position)
Item No.: 2.1.2.2.1 Socket Weld - For All Thickness
Item No.: 2.1.2.2.2 Butt Weld Upto 10mm Thk Small Bore
Item No.: 2.1.2.2.3 Butt Weld Upto 10mm Thk
Item No.: 2.1.2.2.4 Butt Weld > 10 mm thk and up to 20 mm thk
Item No.: 2.1.2.2.5 Erection, Alignment, Supporting, Providing identification band, Flushing, Pressure Testing, Drying, pre-commissioning activities etc,
Item No.: 2.1.3 Carbon steel pipe - Galvanized For detailed work Item description refer (sl no 2.1.3 section 2 of Annexure-I SP1A)
Item No.: 2.1.3.1 Welding (Shop)
Item No.: 2.1.3.1.3 Butt Weld Upto 10mm Thk
Item No.: 2.1.3.2 Welding (Field / Position)
Item No.: 2.1.3.2.2 Butt Weld Upto 10mm Thk Small Bore
Item No.: 2.1.3.2.3 Butt Weld Upto 10mm Thk
Item No.: 2.1.3.2.4 Erection, Alignment, Supporting, Providing identification band, Flushing, Pressure Testing, Drying, pre-commissioning activities etc,
Item No.: 2.1.7 Stainless steel /Inconnel steel / Duplex pipe Non IBR- All grade and specifications including (NACE,H2 services) For detailed work Item description refer (sl no 2.1.7 section 2 of Annexure-I SP1A)
Item No.: 2.1.7.1 Welding (Shop)
Item No.: 2.1.7.1.3 Butt Weld Upto 10mm Thk
Item No.: 2.1.7.2 Welding (Field / Position)
Item No.: 2.1.7.2.1 Socket Weld - For All Thickness
Item No.: 2.1.7.2.2 Butt Weld Upto 10mm Thk Small Bore
Item No.: 2.1.7.2.3 Butt Weld Upto 10mm Thk
Item No.: 2.1.7.2.5 Erection, Alignment, Supporting, Providing identification band, Flushing, Pressure Testing, Drying, pre-commissioning activities etc,
Item No.: 2.1.9 Scope of work is same as 2.1.7 but for Duplex Qty
Item No.: 2.1.9.1 Welding (Shop)
Item No.: 2.1.9.1.3 Butt Weld Upto 10mm Thk
Item No.: 2.1.9.2 Welding (Field / Position)
Item No.: 2.1.9.2.2 Butt Weld Upto 10mm Thk Small Bore
Item No.: 2.1.9.2.3 Butt Weld Upto 10mm Thk
Item No.: 2.1.9.2.5 Erection, Alignment, Supporting, Providing identification band, Flushing, Pressure Testing, Drying, pre-commissioning activities etc,
Item No.: 2.2 ERECTION OF VALVES
Item No.: 2.2.1 Erection of Flanged /welded valves/strainers/bellows (Except TSV/PSV & Control Valve) of all ratings For detailed work Item description refer (sl no 2.2.1 section 2 of Annexure-I SP1A)
Item No.: 2.2.1.1.1 Size - upto 1 inch NB
Item No.: 2.2.1.1.2 Size - 2 inch NB
Item No.: 2.2.1.1.3 Size - 3 inch NB
Item No.: 2.2.1.1.4 Size - 4 inch NB
Item No.: 2.2.1.1.5 Size - 6 inch NB
Item No.: 2.2.1.1.6 Size - 8 inch NB
Item No.: 2.2.1.1.7 Size - 10 inch NB
Item No.: 2.2.1.1.8 Size - 12 inch NB
Item No.: 2.2.1.1.9 Size - 14 inch NB
Item No.: 2.2.1.1.10 Size - 16 inch NB
Item No.: 2.2.1.1.11 Size - 18 inch NB
Item No.: 2.2.1.1.12 Size - 20 inch NB
Item No.: 2.2.1.1.13 Size - 24 inch NB
Item No.: 2.2.1.1.14 Size - 28 inch NB
Item No.: 2.2.1.1.15 Size - 30 inch NB
Item No.: 2.2.1.1.16 Size - 32 inch NB
Item No.: 2.2.1.1.17 Size - 36 inch NB
Item No.: 2.2.1.1.18 Size - 40 inch NB
Item No.: 2.2.2 Erection of Flanged /welded/Sandwiched Pressure Safery valves/ Temperature Safety Valve of all ratings For detailed work Item description refer (sl no 2.2.2 section 2 of Annexure-I SP1A)
Item No.: 2.2.2.1.1 Size - 0.5 inch NB
Item No.: 2.2.2.1.2 Size - 0.75 inch NB
Item No.: 2.2.2.1.3 Size -1 inch NB
Item No.: 2.2.2.1.4 Size - 1.5 inch NB
Item No.: 2.2.2.1.5 Size - 2 inch NB
Item No.: 2.2.2.1.6 Size - 3 inch NB
Item No.: 2.2.2.1.7 Size - 4 inch NB
Item No.: 2.2.2.1.8 Size - 6 inch NB
Item No.: 2.2.2.1.9 Size - 8 inch NB
Item No.: 2.2.2.1.10 Size - 10 inch NB
Item No.: 2.2.2.1.11 Size - 12 inch NB
Item No.: 2.2.2.1.12 Size - 14 inch NB
Item No.: 2.2.3 Erection of Flanged /welded/Sandwiched Control valves of all ratings with actuators and volume bottles For detailed work Item description refer (sl no 2.2.3 section 2 of Annexure-I SP1A)
Item No.: 2.2.3.1.1 Size - 0.5 inch NB
Item No.: 2.2.3.1.2 Size - 0.75 inch NB
Item No.: 2.2.3.1.3 Size - 1 inch NB
Item No.: 2.2.3.1.4 Size - 1.5 inch NB
Item No.: 2.2.3.1.5 Size - 2 inch NB
Item No.: 2.2.3.1.6 Size - 3 inch NB
Item No.: 2.2.3.1.7 Size - 4 inch NB
Item No.: 2.2.3.1.8 Size - 6 inch NB
Item No.: 2.2.3.1.9 Size - 8 inch NB
Item No.: 2.2.3.1.10 Size - 10 inch NB
Item No.: 2.2.3.1.11 Size - 12 inch NB
Item No.: 2.2.3.1.12 Size - 14 inch NB
Item No.: 2.2.3.1.13 Size - 16 inch NB
Item No.: 2.2.3.1.14 Size - 18 inch NB
Item No.: 2.2.3.1.15 Size - 22 inch NB
SECTION 3
Item No.: 3 NON DESTRUCTIVE TEST
Item No.: 3.1 Carry out non destructive testing and Post weld heat tretement work as per specification and instruction of engineer in charge For detailed work Item description refer (sl no 3.1 section 3 of Annexure-I SP1A)
Item No.: 3.1.1 Radiography test For detailed work Item description refer (sl no 3.1.1 section 3 of Annexure-I SP1A)
Item No.: 3.1.1.1.1 Carrying out Radiography Test -Thickness (By -X-ray or gamma ray or Selinium 75) for sizes up to 2" by eliptical shot
Item No.: 3.1.1.1.2 Carrying out Radiography Test -By -Gamma Ray for sizes above 2"
Item No.: 3.1.4 Dye penetrant test For detailed work Item description refer (sl no 3.1.4 section 3 of Annexure-I SP1A)
Item No.: 3.1.4.1.1 Carrying out DP Test - All thickness
Item No.: 3.1.5 Post weld heat tretement (PWHT) For detailed work Item description refer (sl no 3.1.5 section 3 of Annexure-I SP1A)
Item No.: 3.1.5.1.1 Carrying out Post Weld Heat Treatment(PWHT) including hardness test.
Item No.: 3.1.6 Carrying out PMI check For detailed work Item description refer (sl no 3.1.6 section 3 of Annexure-I SP1A)
Item No.: 3.1.6.1 PMI check of raw material / welding joint
SECTION 4
Item No.: 4 CHEMICAL CLEANING/PASSIVATION WORK
Item No.: 4.1 Degreasing and chemical cleaning inclusive of rinsing, preservation, neutralization, drying etc for Piping,equipments as per specification and as per instruction of Engineer-in-charge.For detailed work Item description refer (sl no 4.1 section 4 of Annexure-I SP1A)
Item No.: 4.1.3 Degreasing/Chemical Cleaning/Passivations of Piping
SECTION 5
Item No.: 5 STEAM TRACING WORK
Item No.: 5.1 Fabrication,Erection, alignment,welding ,blasting and painting of Steam Tracing of Pipe Lines installation of supply & return manifolds as per drawings and specification. For detailed work Item description refer (sl no 5.1 section 5 of Annexure-I SP1A)
Item No.: 5.1.1 Carbon steel Size - 15 mm, Nominal Dia
SECTION 6
Item No.: 6 PIPE SUPPORT WORKS
Item No.: 6.1 Supply, Fabrication, Erection, Shotblasting, Painting (System-1) of carbon steel/Stainless steel secondary /special Pipe Supports as per Technical Spcs. & as per Engineer Incharge. For detailed work Item description refer (sl no 6.1 section 6 of Annexure-I SP1A).
Item No.: 6.1.1 Supply, fabrication,Erection,alignment,welding, site adjustment,bolting etc. of Carbon Steel secondary supports /special supports
Item No.: 6.1.2 Supply, fabrication,Erection,alignment,welding,site adjustment,bolting etc. of Stainless Steel secondary supports /special supports
SECTION 7
Item No.: 7 SURFACE PREPARATION & PAINTING WORKS
Item No.: 7.7.1 Item description is same as item no. 7.7 but for Lettering
Item No.: 7.7.1.1 Letter Size-10mm
Item No.: 7.7.1.2 Letter Size-20mm
Item No.: 7.7.1.3 Letter Size-30mm
Item No.: 7.7.1.4 Letter Size-50mm
Item No.: 7.7.1.5 Letter Size-100 mm
Item No.: 7.7.1.6 Letter Size-300 mm
Item No.: 7.7.2 Item description is same as item no. 7.7 but for arrow marking. Measurement of arrow length shall be (L= L1+L2). L1, L2 & W1 are as indicated in painting specification.
Item No.: 7.7.2.1 Width of arrow (W1) - 3mm
Item No.: 7.7.2.2 Width of arrow (W1) - 5 mm
Item No.: 7.7.2.3 Width of arrow (W1) - 10 mm
Item No.: 7.7.2.4 Width of arrow (W1) - 15 mm
Item No.: 7.7.2.5 Width of arrow (W1) - 30 mm
Item No.: 7.7.2.6 Width of arrow (W1) - 50 mm
Item No.: 7.7.2.7 Width of arrow (W1) - 80 mm
Item No.: 7.7.2.8 Width of arrow (W1) - 100 mm
SECTION 8
Item No.: 8 STRUCTURAL WORKS
Item No.: 8.1 Supply, fabrication , erection including blasting ,painting of structural steel and chequerd plate for equipment platform (Circular or rectangular) & Approach ladder for equipment plateform, Liner plate for equipment etc. For detailed work Item description refer (sl no 8.1 section 8 of Annexure-I SP1A)
Item No.: 8.2 Supply, fabrication & erection including blasting ,painting of structural steel and chequerd plate for stair-way, structural work for tower monitor, walkway platform, valve operating platform, intermediate member required for piping support , providing member for supporting the valves , approach ladders etc. For detailed work Item description refer (sl no 8.2 section 8 of Annexure-I SP1A)
Item No.: 8.3 Erection of prefabricated structural steel supplied by others For detailed work Item description refer (sl no 8.3 section 8 of Annexure-I SP1A)
Item No.: 8.4 Supply , Fabrication and Erection of electroforged galvanised grating 30 mm Thk ( Weight approx. 40 kg/m2) For detailed work Item description refer (sl no 8.4 section 8 of Annexure-I SP1A)
Item No.: 8.5 Supply , fabrication and erection including blasting painting of hand rails on equipment platforms,technological structures etc.as per specification and drawings For detailed work Item description refer (sl no 8.5 section 8 of Annexure-I SP1A)
Item No.: 8.6 Supply, fabrication, erection, alignment, welding, testing, site adjustment, bolting etc. of structural materials (including MS hollow pipes, MS plates, MS bars, rails, wheels, etc. ) for Caustic Wagon unloading Arm as per drawing and specifications; at all locations and elevations and and completing the work in all respect as per instructions of the Engineer-in-Charge. Rate shall be inclusive of blast cleaning and painting as per System 1 of Painting Specifications. Scope also includes engaging of all necessary skilled manpower, PPEs, lifting equipment, supplying all consumables, tools and tackles, crane/hydra, providing scaffolding at all levels/elevations, all types and sizes of HT bolts, nuts and washers including U-Bolts.
SECTION 10
Item No.: 10 DISMANTLING WORKS
Item No.: 10.1 Dismantling and rerection of erected steel structures, ladders, platforms, handrails, etc. to facilitate equipment and piping erection. For detailed work Item description refer (sl no 10.1 section 10of Annexure-I SP1A)
Item No.: 10.2 Dismantling and removal of existing reusable/redundant equipment to facilitate erection of new equipment at all elevation and locations. For detailed work Item description refer (sl no 10.2 section 10 of Annexure-I SP1A)
Item No.: 10.2.1 Dismantling of equipment weights up to 50 Tons
Item No.: 10.3 Dismantling and removal of above ground piping of all sizes,all materials & thickness by hot work (Insulated/uninsulated) .For detailed work Item description refer (sl no 10.3 section 10 of Annexure-I SP1A)
Item No.: 10.3.1 For the work up to height 6 meters elevation (CS/AS/LTCS/SS)
Item No.: 10.3.2 Height more than 6 meters but less than 12 meters elevation (CS/AS/LTCS/SS)
Item No.: 10.3.3 Height more than 12 meters but less than 24 meters elevation (CS/AS/LTCS/SS)
Item No.: 10.3.4 Height more than 24 meters and above (CS/AS/LTCS/SS)
Item No.: 10.3A Dismantling of existing under ground piping of all size and thickness by removal of connecting support, pedestral etc for all type of pipe material,size and thickness,For detailed work Item description refer (sl no 10.3 section 10 of Annexure-I SP1A)
Item No.: 10.4 Dismantling/chipping of existing concrete pavement/ foundations/Grouting/fire proofing etc. by using power tools, removal/ disposal/ cleaning/ transportation of debris to location as decided by engineer in charge with in refinery premises to facilitate construction of new installation. For detailed work Item description refer (Item no 10.4 section 10 of Annexure-I SP1A)
Item No.: 10.4.1 Dismantling existing concrete pavement at all levels including all tools, tackles, compressed air, labour, consumables and disposal of debris as directed by Engineer-in-charge.
Item No.: 10.4.2 Dismantling existing grout at all levels including all tools, tackles, compressed air, labour, consumables and disposal of debris as directed by Engineer-in-charge.
Item No.: 10.4.3 Dismantling of existing Fireproofing at all levels including all tools, tackles, compressed air, labour, consumables and disposal of debris as directed by Engineer-in-charge.
Item No.: 10.4.4 Dismantling of existing PLAIN CEMENT CONCRETE work at all levels including all tools, tackles, compressed air, labour, consumables and disposal of debris as directed by Engineer-in-charge.
Item No.: 10.5 Dismantling and transportation of existing Valves/Control valves/Safety valves at all location & elevation as decided by engineer in charge with in refinery premises to facilitate construction of new installation. For detailed work Item description refer (Item no 10.5 section 10 of Annexure-I SP1A)
Item No.: 10.5.1 All type and rating of flanged / welded valves
Item No.: 10.5.2 All types and rating of control valves with actuator and volume bottles
Item No.: 10.5.3 All types and rating of safety valves
Item No.: 10.9 Removal of existing insulation including dismantling of cladding etc irrespective of its type of any thickness from equipment, piping, valves, inline instruments at all height by providing tools tackles, manpower, consumables, scaffolding as per requirement, and clearing the area by shifting / transportation of the removed insulation materials to identified area by Client. This item shall used if removal of insulation is not mentioned in original SOR item
SECTION 11
Item No.: 11 MODIFICATION WORKS
Item No.: 11.1 Modification and reinstallation of existing steel structures, platforms, ladders, gratings etc. as per instruction of engineer in charge. For detailed work Item description refer (sl no 11.1 section 11 of Annexure-I SP1A)
Item No.: 11.2 Modification of Piping/additional works :-Fabrication of modified pipe spools/in situ modification by cutting grinding,cold bending,edge preparation,fit up welding, supporting, punch listing,dilution of punch list, flushing, testing,drying,final documentation etc. For detailed work Item description refer (Item no 11.2 section 11 of Annexure-I SP1A)
Item No.: 11.2.1 Carbon Steel Piping-All grades (Non IBR) up to 12.7 mm thk
Item No.: 11.2.1.1 Cutting (Up to Pipe thickness 20 mm)
Item No.: 11.2.1.2 Grinding/Edge prpeparation/Bevelling/Fit Up/Welding (Up to Pipe thickness 20 mm)
Item No.: 11.2.1.3 Erection/Supporting/punch listing/dilution of punch list (All thickness)
Item No.: 11.2.1.4 Hydrotesting/Flushing/Reinstatement/documentation (All thickness)
Item No.: 11.2.2 Carbon Steel Piping-All grades ( IBR)
Item No.: 11.2.2.1 Cutting (Up to Pipe thickness 20 mm)
Item No.: 11.2.2.2 Grinding/Edge prpeparation/Bevelling/Fit Up/Welding (Up to Pipe thickness 20 mm)
Item No.: 11.2.2.3 Erection/Supporting/punch listing/dilution of punch list (All thickness)
Item No.: 11.2.2.4 Hydrotesting/Flushing/Reinstatement/documentation (All thickness)
Item No.: 11.2.6 Stainless Steel -All grades (NIBR)
Item No.: 11.2.6.1 Cutting (Up to Pipe thickness 20 mm)
Item No.: 11.2.6.2 Grinding/Edge prpeparation/Bevelling/Fit Up/Welding (Up to Pipe thickness 20 mm)
Item No.: 11.2.6.4 Erection/Supporting/punch listing/dilution of punch list (All thickness)
Item No.: 11.2.6.5 Hydrotesting/Flushing/Reinstatement/documentation (All thickness)
SECTION 13
Item No.: 13 ANCHOR FASTENERS WORKS
Item No.: 13.1 Supply,drilling and fixing of mechanical /Chemical expansion anchor fastener of required size and length (Hilti or equivalant make) as per the Instruction of Engineer in-Charge For detailed work Item description refer (sl no 13.1 section 13 of Annexure-I SP1A) as per STD.drawing.
Item No.: 13.1.1 Chemical Anchor Fasteners-Supply & Fixing
Item No.: 13.1.1.1 M12 X 150 mm
Item No.: 13.1.1.2 M12 X 165mm
Item No.: 13.1.1.3 M12 X 185 mm
Item No.: 13.1.1.4 M16 X 220 mm
Item No.: 13.1.1.5 M20 X 170 mm
Item No.: 13.1.1.6 M20 X 250 mm
Item No.: 13.1.1.7 M20 X 260 mm
Item No.: 13.1.1.8 M20 X300 mm
Item No.: 13.1.1.9 M24 X450 mm
Item No.: 13.1.2 Mechanical Anchor Fasteners-Supply & Fixing
Item No.: 13.1.2.1 M10 X 110 mm
Item No.: 13.1.2.2 M10 X 105 mm
Item No.: 13.1.2.3 M10 X 120 mm
Item No.: 13.1.2.4 M12 X 110 mm
Item No.: 13.1.2.5 M12 X 120 mm
Item No.: 13.1.2.6 M12 X 145 mm
Item No.: 13.1.2.7 M12 X 185 mm
Item No.: 13.1.2.8 M16 X 115 mm
Item No.: 13.1.2.9 M16 X 125 mm
Item No.: 13.1.2.10 M16 X 145 mm
Item No.: 13.1.2.11 M16 X 150 mm
Item No.: 13.1.2.12 M16 X 165 mm
Item No.: 13.1.2.13 M16 X 220 mm
Item No.: 13.1.2.14 M20 X 50 mm
Item No.: 13.1.2.15 M20 X 170 mm
Item No.: 13.1.2.16 M20 X 180 mm
Item No.: 13.1.2.17 M20 X 220 mm
Item No.: 13.1.2.18 M20 X 260 mm
Item No.: 13.1.2.19 M24 X 385 mm
SECTION 18
Item No.: 18 TIE IN WORKS DURING SHUT DOWN
Item No.: 18.1 Prefabrication of piping spools
Item No.: 18.1.1 Pre fabrication of piping spools for for all type of materials and thickness for pipelines required for Tie in connection. .For detailed work Item description refer (sl no 18.1 section18 of Annexure-I SP1A)
Item No.: 18.1.1.1 CS up to 10 mm thk (IBR/NBR)
Item No.: 18.1.1.2 CS up to 11 mm to 20 MM thk (IBR/NBR)
Item No.: 18.1.1.7 SS up to 10 mm thk (IBR/NBR)
Item No.: 18.2 Erection, Alignment, Supporting, Providing identification band, Flushing, Pressure Testing, Drying, pre-commissioning activities etc, For detailed work Item description refer (sl no 18.1 section18 of Annexure-I SP1A)
Item No.: 18.2.1 CS up to 10 mm thk (IBR/NBR)
Item No.: 18.2.2 CS up to 11 mm TO 20 MM thk (IBR/NBR)
Item No.: 18.2.4 SS up to 10 mm thk (IBR/NBR)
Item No.: 18.3 Carry out Mechanical Tie in works for pipelines at all location and elevation as per drawing involving cutting , welding and NDT works .For detailed work Item description refer (sl no 18.1 section18 of Annexure-I SP1A)
Item No.: 18.3.1 For tapping size up to 2"
Item No.: 18.3.2 For tapping size from 3" to 10"
Item No.: 18.3.3 For tapping size from 12" to 18"
Item No.: 19 Hot Tapping For detailed work Item description refer (sl no 19 section 19 of Annexure-I SP1A)
Item No.: 19.1 Hot tapping on bare pipe
Item No.: 19.1.1 For tapping size from 1.5" to 10"
Item No.: 19.1.2 For tapping size from 12" to 24"
Item No.: 19.1.3 For tapping size from 28" to 36"
SECTION 20
Item No.: 20.1 Preparation of detail drawings,and get it approved from Engineer in charge, supply, fabrication, erection, testing and commissioning of movable Chutes including supply of all the materials, flanges, gaskets, fasteners, rubber seal, clamping arrangement, trolley wheels, shaft/bearings/brackets,lifting/pulling lugs etc complete as per the specifications, drawings and to the full satisfaction and instruction of Engineer in charge. (MOC IS 2062 E250)
Item No.: 20.2 Preparation of detail drawings and getting it approved from Engineer in charge,fabrication,erection,testing and commissioning of fixed Chutes including supply of all the materials,flanges,gaskets,fasteners,rubber seal,clamping arrangement,trolley wheels,shaft/bearings/brackets,lifting/pulling lugs etc complete as per the specifications,drawings and to the full satisfaction of the Engineer in charge. (MOC IS 2062 E250)
Item No.:1 INSULATION OF EQUIPMENT& PACKAGE ITEMS (REFER ANNEXURE-II SP1B)
Item No.:1.1 INSULATION ON THE EQUIPMENT AS PER PROJECT SPECIFICATION. FOR DETAILED WORK ITEM DESCRIPTION REFER (sl no 1.1 of Annexure-II SP1B)
Item No.:1.1.1 Insulation Type : IH- Hot Insulation, Thickness:
Item No.:1.1.1.1 Insulation Type : IH- Hot Insulation, Thickness: 30mm
Item No.:1.1.1.2 Insulation Type : IH- Hot Insulation, Thickness: 40 mm
Item No.:1.1.1.3 Insulation Type : IH- Hot Insulation, Thickness: 50 mm
Item No.:1.1.1.4 Insulation Type : IH- Hot Insulation, Thickness: 60 mm
Item No.:1.1.1.5 Insulation Type : IH- Hot Insulation, Thickness: 70 mm
Item No.:1.1.1.6 Insulation Type : IH- Hot Insulation, Thickness: 75 mm
Item No.:1.1.1.7 Insulation Type : IH- Hot Insulation, Thickness: 100 mm
Item No.:1.1.2 Insulation Type : PP - Personnel Protection
Item No.:1.1.2.1 Insulation Type : PP - Personnel Protection, Thickness: 30 mm
Item No.:2 INSULATION OF ABOVE GROUND PIPING AS PER PROJECT SPECIFICATION. FOR DETAILED WORK ITEM DESCRIPTION REFER (sl no 1.2 of Annexure-II SP1B)
Item No.:2.1 Insulation Type : IH- Hot Insulation
Item No.:2.1.1 Insulation Type : IH- Hot Insulation, Thickness: 30 mm, Size: 20 mm
Item No.:2.1.2 Insulation Type : IH- Hot Insulation, Thickness: 30 mm, Size: 25 mm
Item No.:2.1.3 Insulation Type : IH- Hot Insulation, Thickness: 30 mm, Size: 50 mm
Item No.:2.1.4 Insulation Type : IH- Hot Insulation, Thickness: 30 mm, Size: 80 mm
Item No.:2.1.5 Insulation Type : IH- Hot Insulation, Thickness: 30 mm, Size: 100 mm
Item No.:2.1.6 Insulation Type : IH- Hot Insulation, Thickness: 50 mm, Size: 15 mm
Item No.:2.1.7 Insulation Type : IH- Hot Insulation, Thickness: 50 mm, Size: 20 mm
Item No.:2.1.8 Insulation Type : IH- Hot Insulation, Thickness: 50 mm, Size: 25 mm
Item No.:2.1.9 Insulation Type : IH- Hot Insulation, Thickness: 50 mm, Size: 40 mm
Item No.:2.1.10 Insulation Type : IH- Hot Insulation, Thickness: 50 mm, Size: 50 mm
Item No.:2.1.11 Insulation Type : IH- Hot Insulation, Thickness: 50 mm, Size: 80 mm
Item No.:2.1.12 Insulation Type : IH- Hot Insulation, Thickness: 50 mm, Size: 100 mm
Item No.:2.1.13 Insulation Type : IH- Hot Insulation, Thickness: 50 mm, Size: 150 mm
Item No.:2.1.14 Insulation Type : IH- Hot Insulation, Thickness: 50 mm, Size: 200 mm
Item No.:2.1.15 Insulation Type : IH- Hot Insulation, Thickness: 50 mm, Size: 250 mm
Item No.:2.1.16 Insulation Type : IH- Hot Insulation, Thickness: 50 mm, Size: 300 mm
Item No.:2.1.17 Insulation Type : IH- Hot Insulation, Thickness: 50 mm, Size: 350 mm
Item No.:2.1.18 Insulation Type : IH- Hot Insulation, Thickness: 50 mm, Size: 400 mm
Item No.:2.1.19 Insulation Type : IH- Hot Insulation, Thickness: 50 mm, Size: 450 mm
Item No.:2.1.20 Insulation Type : IH- Hot Insulation, Thickness: 50 mm, Size: 500 mm
Item No.:2.1.21 Insulation Type : IH- Hot Insulation, Thickness: 50 mm, Size: 600 mm
Item No.:2.1.22 Insulation Type : IH- Hot Insulation, Thickness: 75 mm, Size: 15 mm
Item No.:2.1.23 Insulation Type : IH- Hot Insulation, Thickness: 75 mm, Size: 25 mm
Item No.:2.1.24 Insulation Type : IH- Hot Insulation, Thickness: 75 mm, Size: 40 mm
Item No.:2.1.25 Insulation Type : IH- Hot Insulation, Thickness: 75 mm, Size: 50 mm
Item No.:2.1.26 Insulation Type : IH- Hot Insulation, Thickness: 75 mm, Size: 80 mm
Item No.:2.1.27 Insulation Type : IH- Hot Insulation, Thickness: 75 mm, Size: 100 mm
Item No.:2.1.28 Insulation Type : IH- Hot Insulation, Thickness: 75 mm, Size: 150 mm
Item No.:2.1.29 Insulation Type : IH- Hot Insulation, Thickness: 75 mm, Size: 200 mm
Item No.:2.1.30 Insulation Type : IH- Hot Insulation, Thickness: 75 mm, Size: 250 mm
Item No.:2.1.31 Insulation Type : IH- Hot Insulation, Thickness: 75 mm, Size: 300 mm
Item No.:2.1.32 Insulation Type : IH- Hot Insulation, Thickness: 75 mm, Size: 350 mm
Item No.:2.1.33 Insulation Type : IH- Hot Insulation, Thickness: 75 mm, Size: 400 mm
Item No.:2.1.34 Insulation Type : IH- Hot Insulation, Thickness: 75 mm, Size: 450 mm
Item No.:2.1.35 Insulation Type : IH- Hot Insulation, Thickness: 75 mm, Size: 500 mm
Item No.:2.1.36 Insulation Type : IH- Hot Insulation, Thickness: 75 mm, Size: 600 mm
Item No.:2.1.37 Insulation Type : IH- Hot Insulation, Thickness: 75 mm, Size: 700 mm
Item No.:2.1.38 Insulation Type : IH- Hot Insulation, Thickness: 75 mm, Size: 750 mm
Item No.:2.3 Insulation Type : PP - Personnel Protection
Item No.:2.3.1 Insulation Type : PP - Personnel Protection Thickness: 30 mm, Size: 20 mm
Item No.:2.3.2 Insulation Type : PP - Personnel Protection Thickness: 30 mm, Size: 25 mm
Item No.:2.3.3 Insulation Type : PP - Personnel Protection Thickness: 30 mm, Size: 50 mm
Item No.:2.3.4 Insulation Type : PP - Personnel Protection Thickness: 30 mm, Size: 80 mm
Item No.:2.3.5 Insulation Type : PP - Personnel Protection Thickness: 30 mm, Size: 100 mm
Item No.:2.3.6 Insulation Type : PP - Personnel Protection Thickness: 30 mm, Size: 150 mm
Item No.:2.3.7 Insulation Type : PP - Personnel Protection Thickness: 30 mm, Size: 200 mm
Item No.:2.3.8 Insulation Type : PP - Personnel Protection Thickness: 30 mm, Size: 250 mm
Item No.:2.3.9 Insulation Type : PP - Personnel Protection Thickness: 30 mm, Size: 300 mm
Item No.:2.3.10 Insulation Type : PP - Personnel Protection Thickness: 30 mm, Size: 350 mm
Item No.:2.3.11 Insulation Type : PP - Personnel Protection Thickness: 30 mm, Size: 400 mm
Item No.:2.3.12 Insulation Type : PP - Personnel Protection Thickness: 30 mm, Size: 450 mm
Item No.:2.3.13 Insulation Type : PP - Personnel Protection Thickness: 30 mm, Size: 500 mm
Item No.:2.3.14 Insulation Type : PP - Personnel Protection Thickness: 30 mm, Size: 600 mm
Item No.:2.3.15 Insulation Type : PP - Personnel Protection Thickness: 30 mm, Size: 750 mm
Item No.:2.3.16 Insulation Type : PP - Personnel Protection Thickness: 30 mm, Size: 900 mm
Item No.:2.3.17 Insulation Type : PP - Personnel Protection Thickness: 30 mm, Size: 1050 mm
Item No.:2.3.18 Insulation Type : PP - Personnel Protection Thickness: 30 mm, Size: 1200 mm
Item No.:2.3.19 Insulation Type : PP - Personnel Protection Thickness: 30 mm, Size: 1350 mm
Item No.:3 INSULATION OF ABOVE GROUND VALVES AS PER PROJECT SPECIFICATION. FOR DETAILED WORK ITEM DESCRIPTION REFER (sl no 1.3 of Annexure-II SP1B)
Item No.:3.1 Insulation Type : IH- Hot Insulation
Item No.:3.1.6 Insulation Type : IH- Hot Insulation, Thickness: 30 mm, Size: 20 mm
Item No.:3.1.7 Insulation Type : IH- Hot Insulation, Thickness: 30 mm, Size: 25 mm
Item No.:3.1.8 Insulation Type : IH- Hot Insulation, Thickness: 30 mm, Size: 50 mm
Item No.:3.1.13 Insulation Type : IH- Hot Insulation, Thickness: 30 mm, Size: 80 mm
Item No.:3.1.14 Insulation Type : IH- Hot Insulation, Thickness: 30 mm, Size: 100 mm
Item No.:3.1.15 Insulation Type : IH- Hot Insulation, Thickness: 50 mm, Size: 15 mm
Item No.:3.1.16 Insulation Type : IH- Hot Insulation, Thickness: 50 mm, Size: 20 mm
Item No.:3.1.17 Insulation Type : IH- Hot Insulation, Thickness: 50 mm, Size: 25 mm
Item No.:3.1.18 Insulation Type : IH- Hot Insulation, Thickness: 50 mm, Size: 40 mm
Item No.:3.1.23 Insulation Type : IH- Hot Insulation, Thickness: 50 mm, Size: 50 mm
Item No.:3.1.24 Insulation Type : IH- Hot Insulation, Thickness: 50 mm, Size: 80 mm
Item No.:3.1.25 Insulation Type : IH- Hot Insulation, Thickness: 50 mm, Size: 100 mm
Item No.:3.1.26 Insulation Type : IH- Hot Insulation, Thickness: 50 mm, Size: 150 mm
Item No.:3.1.27 Insulation Type : IH- Hot Insulation, Thickness: 50 mm, Size: 200 mm
Item No.:3.1.28 Insulation Type : IH- Hot Insulation, Thickness: 50 mm, Size: 250 mm
Item No.:3.1.29 Insulation Type : IH- Hot Insulation, Thickness: 50 mm, Size: 300 mm
Item No.:3.1.30 Insulation Type : IH- Hot Insulation, Thickness: 50 mm, Size: 350 mm
Item No.:3.1.31 Insulation Type : IH- Hot Insulation, Thickness: 50 mm, Size: 400 mm
Item No.:3.1.32 Insulation Type : IH- Hot Insulation, Thickness: 50 mm, Size: 450 mm
Item No.:3.1.35 Insulation Type : IH- Hot Insulation, Thickness: 50 mm, Size: 500 mm
Item No.:3.1.36 Insulation Type : IH- Hot Insulation, Thickness: 50 mm, Size: 600 mm
Item No.:3.1.37 Insulation Type : IH- Hot Insulation, Thickness: 75 mm, Size: 15 mm
Item No.:3.1.38 Insulation Type : IH- Hot Insulation, Thickness: 75 mm, Size: 25 mm
Item No.:3.1.39 Insulation Type : IH- Hot Insulation, Thickness: 75 mm, Size: 50 mm
Item No.:3.1.40 Insulation Type : IH- Hot Insulation, Thickness: 75 mm, Size: 80 mm
Item No.:3.1.43 Insulation Type : IH- Hot Insulation, Thickness: 75 mm, Size: 100 mm
Item No.:3.1.44 Insulation Type : IH- Hot Insulation, Thickness: 75 mm, Size: 150 mm
Item No.:3.1.45 Insulation Type : IH- Hot Insulation, Thickness: 75 mm, Size: 200 mm
Item No.:3.1.46 Insulation Type : IH- Hot Insulation, Thickness: 75 mm, Size: 250 mm
Item No.:3.1.47 Insulation Type : IH- Hot Insulation, Thickness: 75 mm, Size: 300 mm
Item No.:3.1.48 Insulation Type : IH- Hot Insulation, Thickness: 75 mm, Size: 350 mm
Item No.:3.1.49 Insulation Type : IH- Hot Insulation, Thickness: 75 mm, Size: 400 mm
Item No.:3.1.50 Insulation Type : IH- Hot Insulation, Thickness: 75 mm, Size: 450 mm
Item No.:3.1.51 Insulation Type : IH- Hot Insulation, Thickness: 75 mm, Size: 500 mm
Item No.:3.1.52 Insulation Type : IH- Hot Insulation, Thickness: 75 mm, Size: 600 mm
Item No.:3.1.53 Insulation Type : IH- Hot Insulation, Thickness: 75 mm, Size: 750 mm
Item No.:3.2 Insulation Type : PP - Personnel Protection
Item No.:3.2.2 Insulation Type : PP - Personnel Protection Thickness: 30 mm, Size: 25 mm
Item No.:3.2.3 Insulation Type : PP - Personnel Protection Thickness: 30 mm, Size: 50 mm
Item No.:3.2.9 Insulation Type : PP - Personnel Protection Thickness: 30 mm, Size: 80 mm
Item No.:3.2.10 Insulation Type : PP - Personnel Protection Thickness: 30 mm, Size: 100 mm
Item No.:3.2.11 Insulation Type : PP - Personnel Protection Thickness: 30 mm, Size: 150 mm
Item No.:3.2.12 Insulation Type : PP - Personnel Protection Thickness: 30 mm, Size: 200 mm
Item No.:3.2.13 Insulation Type : PP - Personnel Protection Thickness: 30 mm, Size: 250 mm
Item No.:3.2.14 Insulation Type : PP - Personnel Protection Thickness: 30 mm, Size: 300 mm
Item No.:3.2.15 Insulation Type : PP - Personnel Protection Thickness: 30 mm, Size: 350 mm
Item No.:3.2.16 Insulation Type : PP - Personnel Protection Thickness: 30 mm, Size: 400 mm
Item No.:3.2.17 Insulation Type : PP - Personnel Protection Thickness: 30 mm, Size: 450 mm
Item No.:3.2.18 Insulation Type : PP - Personnel Protection Thickness: 30 mm, Size: 750 mm
PORT AREA
SECTION 1
Item No.: 1 INSTALLATION OF EQUIPMENT
Item No.: 1.1 Installation of static equipment supplied in single piece .For detailed work Item description refer (sl no 1.1 section 1 of Annexure-I SP1A)
Item No.: 1.1.3 Erection of equipments weights up to 50 Tons
Item No.: 1.6 Installation of Rotary equipments like pumps,agitators etc. For detailed work Item description refer (sl no 1.6 section 1 of Annexure-I SP1A)
Item No.: 1.6.2 Erection of equipments (Port Area)
SECTION 2
Item No.: 2 ABOVE GROUND PIPING WORKS
Item No.: 2.1 Fabrication and Installation of A/G piping works. For detailed work Item description refer (sl no 2.1 section 2 of Annexure-I SP1A).
Item No.: 2.1.1 Carbon steel pipe Non IBR - All grade and specifications including (NACE,H2services) For detailed work Item description refer (sl no 2.1.1 section 2 of Annexure-I SP1A)
Item No.: 2.1.1.3 Welding (Shop)
Item No.: 2.1.1.3.1 Butt Weld Upto 10mm Thk
Item No.: 2.1.1.4 Welding (Field / Position)
Item No.: 2.1.1.4.1 Butt Weld Upto 10mm Thk
Item No.: 2.1.1.5 Erection, Alignment, Supporting, Providing identification band, Flushing, Pressure Testing, Drying, pre-commissioning activities etc,
Item No.: 2.1.3 Carbon steel pipe - Galvanized For detailed work Item description refer (sl no 2.1.3 section 2 of Annexure-I SP1A)
Item No.: 2.1.3.3 Welding (Field / Position)
Item No.: 2.1.3.3.2 Butt Weld Upto 10mm Thk Small Bore
Item No.: 2.1.3.3.4 Erection, Alignment, Supporting, Providing identification band, Flushing, Pressure Testing, Drying, pre-commissioning activities etc,
Item No.: 2.2 ERECTION OF VALVES
Item No.: 2.2.1 Erection of Flanged /welded valves/strainers/bellows (Except TSV/PSV & Control Valve) of all ratings For detailed work Item description refer (sl no 2.2.1 section 2 of Annexure-I SP1A)
Item No.: 2.2.1.2.1 Size - upto 1 inch NB
Item No.: 2.2.1.2.2 Size - 2 inch NB
Item No.: 2.2.1.2.3 Size - 6 inch NB
Item No.: 2.2.1.2.4 Size - 8 inch NB
Item No.: 2.2.1.2.5 Size - 10 inch NB
Item No.: 2.2.1.2.6 Size - 12 inch NB
Item No.: 2.2.3 Erection of Flanged /welded/Sandwiched Control valves of all ratings with actuators and volume bottles For detailed work Item description refer (sl no 2.2.3 section 2 of Annexure-I SP1A)
Item No.: 2.2.3.2.1 Size - 10 inch NB
SECTION 3
Item No.: 3 NON DESTRUCTIVE TEST
Item No.: 3.1 Carry out non destructive testing and Post weld heat tretement work as per specification and instruction of engineer in charge For detailed work Item description refer (sl no 3.1 section 3 of Annexure-I SP1A)
Item No.: 3.1.1 Radiography test For detailed work Item description refer (sl no 3.1.1 section 3 of Annexure-I SP1A)
Item No.: 3.1.1.2.1 Carrying out Radiography Test -Thickness (By -X-ray or gamma ray or Selinium 75) for sizes up to 2" by eliptical shot
Item No.: 3.1.1.2.2 Carrying out Radiography Test -By -Gamma Ray for sizes above 2"
Item No.: 3.1.4 Dye penetrant test For detailed work Item description refer (sl no 3.1.4 section 3 of Annexure-I SP1A)
Item No.: 3.1.4.2.1 Carrying out DP Test - All thickness
Item No.: 3.1.5 Post weld heat tretement (PWHT) For detailed work Item description refer (sl no 3.1.5 section 3 of Annexure-I SP1A)
Item No.: 3.1.5.2.1 Carrying out Post Weld Heat Treatment(PWHT) including hardness test.
SECTION 6
Item No.: 6 PIPE SUPPORT WORKS
Item No.: 6.1 Supply, Fabrication, Erection, Shotblasting, Painting (System-1) of carbon steel/Stainless steel secondary /special Pipe Supports as per Technical Spcs. & as per Engineer Incharge. For detailed work Item description refer (sl no 6.1 section 6 of Annexure-I SP1A).
Item No.: 6.1.3 Supply, fabrication,Erection,alignment,welding, site adjustment,bolting etc. of Carbon Steel secondary supports /special supports
SECTION 7
Item No.: 7 SURFACE PREPARATION & PAINTING WORKS
Item No.: 7.7.1 Item description is same as item no. 7.7 but for Lettering
Item No.: 7.7.1.1 Letter Size-10mm
Item No.: 7.7.1.2 Letter Size-20mm
Item No.: 7.7.1.3 Letter Size-30mm
Item No.: 7.7.1.4 Letter Size-50mm
Item No.: 7.7.1.5 Letter Size-100 mm
Item No.: 7.7.1.6 Letter Size-300 mm
Item No.: 7.7.2 Item description is same as item no. 7.7 but for arrow marking. Measurement of arrow length shall be (L= L1+L2). L1, L2 & W1 are as indicated in painting specification.
Item No.: 7.7.2.1 Width of arrow (W1) - 3mm
Item No.: 7.7.2.2 Width of arrow (W1) - 5 mm
Item No.: 7.7.2.3 Width of arrow (W1) - 10 mm
SECTION 10
Item No.: 10 DISMANTLING WORKS
Item No.: 10.10 Dismantling of Carbon steel pipe including removal of support, fitting, bolts, consumables, tools & tackles, equipments, shifting, handling, handing over to client store or shifting to designated place etc. all complete as per instruction of engineer-in-charge.
SECTION 13
Item No.: 13 ANCHOR FASTENERS WORKS
Item No.: 13.1 Supply,drilling and fixing of mechanical /Chemical expansion anchor fastener of required size and length (Hilti or equivalant make) as per the Instruction of Engineer in-Charge For detailed work Item description refer (sl no 13.1 section 13 of Annexure-I SP1A) as per STD.drawing.
Item No.: 13.1.2 Mechanical Anchor Fasteners-Supply & Fixing
Item No.: 13.1.2.1 M10 X 110 mm
Item No.: 13.1.2.2 M10 X 105 mm
Item No.: 13.1.2.3 M10 X 120 mm
Item No.: 13.1.2.4 M12 X 110 mm
Item No.: 13.1.2.5 M12 X 120 mm
Item No.: 13.1.2.6 M12 X 145 mm
Item No.: 13.1.2.7 M12 X 185 mm
Item No.: 13.1.2.8 M16 X 115 mm
Item No.: 13.1.2.9 M16 X 125 mm
Item No.: 13.1.2.10 M16 X 145 mm
Item No.: 13.1.2.11 M16 X 150 mm
Item No.: 13.1.2.12 M16 X 165 mm
Item No.: 13.1.2.13 M16 X 220 mm
Bidder Name
Amount in Words
Offshore Infrastructures Ltd
BRIDGE AND ROOF COMPANY INDIA LIMITED
BRIDGE AND ROOF COMPANY INDIA LIMITED
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid