Loading
Loading…
Loading…
Tender Value
₹79.2 L
EMD Value
₹1.6 L
Closing Date
31 Oct 2025, 11:00 pmClosed
Rural Drinking Water and Sanitation Department
KALPANA
8197522378
PROVIDING FHTCS TO 290 HOUSEHOLDS IN DODDAHASALA HABITATION OF DODDAHASALA VILLAGE DODDAHASALA G.P OF KOLAR TALUK KOLAR DISTRICT BY AUGMENTATION AND RETROFITTING THROUGH SVS
RWSSD/2023-24/WS/WORK_INDENT1308/CALL-2
RWSSD/2023-24/WS/WORK_INDENT1308/CALL-2
Open
Water supply/sewage lines
Two Tender Document System(Two Cover)
RWSSD Division Office Kolar
8 documents required · 8 mandatory
Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
In last 5 years achieved In at least one year that is the work done equal to 50 % of amount put to tender for similar nature of work and as per KW (90 % satisfactorily completed) the certificate issued by not below the rank of Executive Engineer.
Valid PWD Contractor Registration Certificate
Additional Documents as per notification
GST & PAN Registration Certificates
The bidder should submit self-declaration regarding drilling of borewell through valid 7A Registration certified agency. At the time of billing should submit valid 7A Registration certificate along with the bill.
Ongoing commitments of the bidder must be submitted the certificate issued by not below the rank of Executive Engineer
Unconditional Line of credit certificate for 30 percent of amount put to tender issued by nationalized bank as per KW
Achieved in at least last 5 years Turn over certificate issued by CA in which two years turnover should be two times amount put to tender as per KW
₹1,990
₹1.6 L
17 Oct 2025
17 Oct 2025
3 Nov 2025
30 Oct 2025
PROVIDING FHTCS TO 290 HOUSEHOLDS IN DODDAHASALA HABITATION OF DODDAHASALA VILLAGE DODDAHASALA G.P OF KOLAR TALUK KOLAR DISTRICT BY AUGMENTATION AND RETROFITTING THROUGH SVS
Cutting road surfaces for pipeline trenches and disposing of the excavated stuff as directed including barricading, danger lighting etc. in the classifications for: Cutting Cement Concrete Road surf...
Cutting road surfaces for pipeline trenches and disposing of the excavated stuff as directed including barricading, danger lighting etc. in the classifications for: Cutting asphalt Road surface by M...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution ...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution ...
Earthwork excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...
Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm (Depth upto 1.50m not exceeding 1.5m in width ) trench width as per drawing and technical specificati...
Supplying S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work si...
Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
HDPE Grade PE100-PN6.0, 75mm dia.
HDPE Grade PE100-PN6.0, 90mm dia.
for Suilce Valve of PN 16.0 and 50mm For Suilce Valve of PN -10.0 and 50mm
For Suilce Valve of PN 16.0 and 80mm.
Refilling Available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deponited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 ...
Supply and fixing of fixed height surface box H-4057 MD-KU with PP 40% GF Lid, Housing of PA+, Locking clip of PP with Notched bolt M 12 x 130 hexagon head A2-70 for service connection valves, desig...
WET MIX MECADAM
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage ...
Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M20 (Grade), c...
Providing Laying and Fixing Gl pipes conforming to IS 12391990 with latest amendments complete with GI fittings escluding the cost of fittings) with cuts and threads wherever necessary, including tes...
63 MM ELECTRO FUSION COUPLER.
75 MM ELECTRO FUSION COUPLER.
90 MM ELECTRO FUSION COUPLER.
63 MM ELECTRO FUSION TEE
75 MM ELECTRO FUSION TEE,
75X63 MM ELECTRO FUSION REDUCER
90X63 MM ELECTRO FUSION REDUCER
90X75 MM ELECTRO FUSION REDUCER.
63 MM ELECTRO FUSION ELBOW.
75 MM ELECTRO FUSION ELBOW.
90 MM ELECTRO FUSION ELBOW.
Supply of Electro fusion End Cap with Pipe of 0.2 m length
Providing 80 mm dia Air valve confirming to IS 1538 (Part-I to XXII) 1978 with latest
amendments if any
Providing and fixing 3 layer PP-R (Poly Propylene Random Copolymer) pipes confinning to IS.1580 I with WRAS and NSF cenificates with UV stabilized and anti-microbial...
Providing and fixing 3 layer PP-R (Poly Propylene Random Copolymer) pipes confinning to IS.1580 I with WRAS and NSF cenificates with UV stabilized and anti-microbial...
Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) ...
Providing and fixing Electro fusion saddle comply with BS EN 12201 - 3:2011, PN - 125 rating and food grade raw material as per BS 6920 for effect on water Quality intended for human consumption. Mate...
Flow Control valve 5LPM/10LPM/15LPM: Providing and fixing Flow control valve using food grade materials SS 316 ball / 1/2 15mm including cost of all materials, labour charges, HOM a...
Providing and fixing brass bib cock of approved quality ,20 mm nominal bore
Supply of PPR Female Threaded Coupling confirming to IS 15801-2008 and DIN Standards 8077/8092 2nd Memorandum Vide Ref CE Office, BWSSB 2022-23-(20Xl/2mm)
Supply of PPR Female Threaded Coupling confirming to IS 15801-2008 and DIN Standards 8077/8092 2nd Memorandum Vide Ref CE Office, BWSSB 2022-23-(25Xl/2mm)
Supply of PPR Plain Union confirming to IS 15801-2008 and DINStandards 8077/8092 (20mm) Item code - B184A
Supply of PPR Ball valve Plastic (Heavy Body) confirming to IS 15801-2008 and DIN Standards 8077 /8092 (20mm) Item code - B189A
Supply of PPR End Cap confirming to IS 15801-2008 and DIN Standards 8077 /8092. PPR End Cap 20mm, Item code - B181A
Supply and Fixing of RCC demarcation stones of 30 cms x 15 cms and 90 cms deep using 1:2:4 cc and 6mm dia rods for verticals and stirrups and rendered smooth , including engraving lette...
Supply and fixing pot rest slab of size 0.45 x 0.30 x 0.20 meters with central dip for resting the pot including two line dressing and edges rounded and with all lead.
Supply and fixing of HDPE water meter box to protect the water meter of class 'B: multijet type of size 15 to 32mm including HDPE box with base dia 300mmxlid dia 200mmxheight 250mm with openable lid a...
Supplying and fixing Multijet class B inferential type, AMR compatible water meters with IP 68 protection totalizer confoming to IS 779 with its latest amendments of ...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt,...
Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M2...
Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade.
Providing and constructing stand post 1.22m x 1,22m size for public fountain with R.C.C. post of size 1.22m x 0.38m x la tom with top rounded and R.C.C. curb slab of size 1.22m x 10.30m x 0.05m in CC ...
Providing and fixing Flow control valve using food grade terials SS 316 ball / 1/2 15mm including cost of all materials, labour charges, HOM and testing complete as per of following specification. The...
Providing. Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with Gl fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including t...
The Supplying and fixing Multijet class B inferential type. AMR compatible water meters with IP 68 protection totalizer confoming to IS 779 with its latest amendments of following size to service conn...
Supply and fixing of HDPE water meter box with locking arrangement to protect the water meter of Class 'B' Multijet type of size 15 to 32 mm including HDPE box with base dia 300mm x lid dia 200mm x he...
Earth work excavation by manual means for drains,canals. waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and echnical specifications, incl...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Providing and fixing MS inspection door of size 60 cms x 60 (ems, including MS frame made of 50x50x6mm angle. Shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. includ...
Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cut- ting, bending, placing in position, binding and anchoring to adjac...
Supply and delivery of Woltman model with removal Imechanism water meters confirming to ISO 4064 part I,II,III class B or IS 779 and IS 2373 with life cycle test certificate Ifrom FCRI/ NABL accredite...
Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments -80mm dia - CSR-2021-22 Vol-V Page No.162 Item No:28.3
Borewell depth of 0 to 50 Mtrs.SR of Water Supply & UGD 2021-22),
Borewell depth of 50 to 100 Mtrs.SR of Water Supply & UGD 2021-22),
Borewell depth of 100 to 150 Mtrs.SR of Water Supply & UGD 2021-22),
Borewell depth of 150 to 200 Mtrs.SR of Water Supply & UGD 2021-22),
Borewell depth of 200 to 250 Mtrs.SR of Water Supply & UGD 2021-22),
Borewell depth of 250 to 300 Mtrs.SR of Water Supply & UGD 2021-22),
Borewell depth of 300 to 350 Mtrs.SR of Water Supply & UGD 2021-22),
Borewell depth of 350 to 400 Mtrs.SR of Water Supply & UGD 2021-22),
Borewell depth of 400 to 450 Mtrs.SR of Water Supply & UGD 2021-22),
Supply of ISI mark 175mm nominal bore,plain and steel lasing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, m...
Providing and laying at site of work MS casing caps as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum)...
Earthwork excavation by manual means for foundation of drains, canals water weir draft, approach channels, key trenches, foundations of Bridges and such similar works, as per drawing and technical sp...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant ...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Providing and laying in position Reinforced cement concrete for columns, braces and ring beam above ground level. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per re...
Providing and laying in position Reinforced cement concrete for shell portion, bottom dome / slab and ribs over the staging. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregat...
Providing and laying in position Reinforced cement concrete for side walls of water tank over the staging above the ground level. The granite/ trap/basalt crushed graded coarse aggregates and fine agg...
Providing and laying in position Reinforced cement concrete for top dome of water tank over the staging above the ground level. The granite/trap/basalt crushed graded coarse aggregates and fine aggreg...
Providing T.M.T steel reinforcement for R.C.C work inclding Labour charges for fabricating mild steel or torsteel bars of all sizes for reinforcement for RCC works including conveying steel to work sp...
Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed,...
Ladder inside the container: Providing anodized aluminium ladder using 65mm x 32mm x 3.0mm C section for ladder side channel x 25mm dia., flutal pipe for Rungs at 250mm c/c ladder fixed at an angle of...
Providing and fixing gauge with iron sheet or enamelled guage plate of 3mm to 4mm thick, 0.23 M width with copper floats indicators and flexible nylone wires, painting figures with approved enamel pai...
Providing and fixing RCC final and ventilators as per approved design and specifications with form works and protected with wire mesh. The plinth to be of RCC circular pillars and canopy with an ornam...
Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. includi...
Supplying and fixing DI/CI puddle flanges conforming to IS 7181-1986 with latest ammendments., in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc...
Supplying, Laying and Jointing Cast Iron (CI) double flanged pipes true to line / hoisting of DI flanged pipe in position and aligning to correct plumb, including cost of jointing materials, conveying...
Providing 80 mm dia Bell mouthed pipes (flanged) confirming to IS 1538 (Part-I toXXII) 1978 with latest amendments if any cost of all materials, labour charges etc.complete.
Suppling Ductile Iron Push on special confirming to IS 9523:2000 - All
Double Socket Duck Foot DI Bends: 80 X 900
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS 1865 and of grade GGG 40/50, shaft of stainless steel, wedge ...
Providing and fixing gauge with iron sheet or enamelled guage plate of 3mm to 4mm thick, 0.23 M width with copper floats indicators and flexible nylone wires, painting figures with approved enamel pai...
Providing two coats of water proof cement painting with approved colour and shade over one coat of primer including scrapping the surface with wire brushes etc. before removal of scaffolding for new R...
Painting with synthetic enamel paint of approved brand andmanufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and fore...
Supplying and fixing lightening arrestor with aluminium strip 25mm x 3mm size including finial and grounding, aluminium strip to be embeded in one of the columns in and independent GI conduit of 40mm ...
Supplying and fixing 40mm dia. GI pipe medium duty pipes hand railing 3 rows fixed to RCC 1:2:4 vibrated post of 150x150mm at bottom and 100x150mm at top, placed at 2 Mtrs. intervals for a height of 7...
Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and uch similar works, as per drawing and technical specifications, incl...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and fixing Steel work in built up tubular (round, square or octangular hollow tubes etc.) trusses etc., including cutting, hoisting. ing in position and applying a priming coat of approved s...
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direct...
Fencing with G.I. barbed wire Angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...
Providing plastering in cement mortar 1:3 proportion with minimum 2% of approved quality water proof compound, including scaffolding, racking out joints 25mm deep, smooth finishing, curing etc. with a...
RCC hume pipe Circular pump house: Supplying precast RCC Circular Hume pipe pump house with M.S door and RCC conical roof as per specification and drawings - Internal dia Mtr. 1200 mm & height of 2.5 ...
Erection and poistioning of RCC Hume Pipe house/Cistern on size stone masory platform including transportation charges and handling, finishing with all necessary tools, plants and materials etc. comp...
• MINI Chlorinator 80gms/Batch Production capacity : 10gms/hr Total time per Batch : 8Hrs. Total volume of chlorine generation : 80 gms/ batch. Salt Required per hr. : 400 gms/batch. Electrical powe...
Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works in all kinds of soils , as per drawing and techni...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing Brick masonary with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand)...
Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...
Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces :One coat with paint of approved quality to give ...
Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034 2000 3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, as per n...
Supply, installing, testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog...
Supply and delivery of galvanized mild steel tubes of 6mtr. standard length heavy duty (C Class) as per IS 1239 (Part-I) 1990 with latest amendments with ISI Mark (one end fitted) 3 with Heavy Duty co...
Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its 4 latest amendments.
Supply and delivery at site wrought middle steel (galvanized) GI bend confirming to IS 1239-II, 1991 with latest amendments if any. ...
Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well cap...
Supply and laying insulated cable on messenger wire using 2 single core wire for a single phase and stringing PVC insulated and PVC sheathed 650 / 1100 V class aluminium conductor of sizes supported ...
Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm.
Supply and delivery at site of brand new best make non-return as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm.
Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including ...
Supply and delivery at site wrought middle steel (galvanized) GI Union confirming to IS 1239-II, 1991 with latest amendments if any. For 50 mm dia GI Union
Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size m...
Fabricating, Supplying and mounting MS Box Made out ... SWG Suitable for Floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged ...
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S.flat with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved pai...
Supplying 6A flush/projected type socket and a 6 amps flush/projected type SP switch either surface/flush mounting in a existing gang box or in a 4mm thick plastic sheet and fixing over a flu...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100Vgrade, multistrand copper wire with low conductor resistance single core in open or concealed system ...
Supplying & fixing of porcelain fuse channel with cut out on existing wooden panel using necessary nuts, bolts and washers etc B) 32 Amps
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF,energy cross-3with Short circuit b...
Supplyng and wiring Earth Leakage Miniature Circuit Breaker (ELMCB) 240 4 /450 V upto 300 mA sensitivity on Existing wood / panel board 32-40 Ampspole.
Supplying and Fixing a shut capacitor of KVAR capacity with necessary clamps, bolts, and nuts on existing wooden metal board including banking of more than one capacitorupto 5 KVAR.
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C. Group A
Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipments on the meter board using 40mm dia 2.90 thick GI pipe 2.5Mtr long buried in ...
Supplying of 1.1 KV LT UG cable having alluminium conductor PVC insulated, sheathed, extruded inner sheathed, galvanized, steel strips (except 2C x 10Sq.mm wire armoured...
Labour charges for laying of 1.1K V class UG cable in existing in existing trench GI pipe/stoneware pipe /on wall/on pole as required, In exIsting trench/duct. 6 Sqmm to 16 sqmm
On wall/structure a)6 sqmm to 16sqmm
Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc, complete (As per civil SR KSRB 1-2, P7) In soil (Hard)
Supplying and fixing of class -A (medium) GI pipe of wall thickness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV class (a) 40mm.
Supplying and fixing L.T cast iron pot heads suitable for 1.1K V class UG cable filled with necessary bitumen / insulation compound with terminals,clamps bolts nuts and washers...
Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps,nails, guttas/spacers etc.,GI Wire c...
Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 A three phase 4 wire whole current class- 1 Accuracy Energy Meter.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
KW 3 - INDENT1308 CALL 2.docx
Tender Document • 0.22 MB
NOTI 9.pdf
Others - NOTIFICATION • 5.21 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].