MP GF 2025-26

Roofing: - Roofing will be provided with 0.5mm thick galvanized/ pre painted G.I. profiled sheets fixed to the purlins with 14 size self-drilling screws with neoprene washer. Side laps are stitched with selftapping/drilling screws. End laps are to be sealed with 25x3 mm Butyl tape. The sheets are provided with anti-capillary grove.

RCC M-20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of 15 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, centering, shuttering laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work but excluding cost of steel and its fabrication charges for finished item of work. (75mm thick roof slab)

Masonry work in CM (1:8) prop with Flyash Cement solid blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs. cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials, labour charges, seiniorage charges, scaffolding and curing etc., cpomplete with a compresive streangth not lessthan 50 kg/sqm for walls for Superstructure Walls.

Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of 100*65 MM with encapsulation of 6 MM rigid layer on all external surfaces. The door frame will have a rebate of 32MM/ 37 MM. The two Vertical members are to be joined together with the horizontal member using 8x75 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to wall using Z Hand fast 300 MM long hold fast

Supplying and fixing of 28/30 mm thick Wood Plastic Composite (WPC) Door shutter, comprising of 70% virgin polymer, 15% wood powder (fiber), and the remaining 15% additives, comprising of virgin PVC polymer of K value 58-60 (Suspension grade). Calcium carbonate and natural fibers (wood powder) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum door density of 650 kg/cum, screw withdrawal strength 1800N (Face) & 900N (Edge), Modulus of Elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws all as per direction of Engineer - in- Charge (SS butt hinges and SS screws shall be paid separately

SupplyingandfixingofUnplasticisedPolyVinyl Chloride (UPVC) 3 track sliding windows with mesh shutter - (2-glass shutters and 1- mesh shutter duly manufactured using UPVC reinforcedprofiles(Compositionofprofileshall consists a minimum of 5.5 PHR of TIO2 andnot more than 12PHR of CaCo3forevery 100parts ofPVCresin) of(94mmx45mm)/(80mmx52 mm) x 2.20 mm for outer frames, (58 mm x 39 mm)/(54 mm x 38 mm) x 2.20 mm for sliding shutter frames capable of mounting single glazing system structurally reinforced withhot dip galvanized up to 50 microns of minimum thicknessof 1.0/1.2mmprefabricated&welded through fusion welding. The window sashshall be fitted with 5 mm thick clear float glass of reputed make and mesh shutter frame shall be (42mmx25mm/ (52mmx21.5mm) x 2.0mm fitted with VinylCoated Fibremesh-onrollers/ pulley duly fixed with Grey colour TPV Gasket for sash & Glazing bead shall be co-extruded with Grey colour soft PVC System shall have single point locking with Touch Lock and the systemis to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation

Plastering 12mm thick double coat in CM (1:5) 8 mm thick base coat and CM (1:3) of 4mm thick top coat with dubara sponge finish including c/c of all materials like cement, sand,water etc., to site, other taxes on all materials, all operational, incidental and labour charges such as mixing mortar, scaffolding charges, lift charges, Including cutting of Grooves wherever necessary as directed by Engineer-in-charge, finishing, curing, etc., complete for for finished item of work. (APSS 901,903 & 904) - External Walls

Flooring with vitrified tiles 600 x 600mm of 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work,.

White washing two coats with white cement to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials

Providing high yield strength deformed (HYSD) steel TMT bars (Fe 415 grade as per IS 1786- 1985) of 8mm to 40mm diameters, cutting, bending, to required sizes and shapes placing in position with cover blocks of approved size and binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings including Cost and Conveyance of bars from approved sources to site of work with all taxes including Cost and Conveyance of binding wire, cover blocks chains, overlaps, spacess, dowels, wastage etc, and all operational, incidental, and labour charges such as cutting, bending, placing in position, tying etc., and other taxes,on cost of all materials complete for finished item of work (APSS No.126) in all floors