Providing IEI, EEI and LED Par lights and SITC of Submersible and Monobloc Pumpset for the Monsoon Festival at Carbyns Cove, Port Blair. Sw Providing IEI and EEI

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Group C

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 A switch

3 pin 5/6 A socket outlet

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings).

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

6 way , Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing brass batten/ angle holder including connection etc. as required.

Supplying of 9W LED Bulb CDL/WW, Make:- Philips, Cat No. 85395000 or equivalent.

Supply of LED Bulkhead 10W, Make:-Bajaj, Model:- BIBWP 10WLED or equivalent.

Supplying of 4' LED slimline next 20W (Make: Philips, Cat No: 94051090 or equivalent).

Installation, testing and commissioning of wall bracket /ceiling fittings/ LED Batten lights/Flood light of all sizes and shapes complete with all accessories including connections etc. as required.

Supplying of 1200 mm sweep BLDC , 5 star rated, energy saving ceiling fan without remote with maximum power input of 32 W (white colour) suitable for 230 V, 50 Hz, A.C. supply (Make: Crompton, Model: Riviera or equivalent).

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Supplying of Exhaust fan 200mm ( Make: Orient, Model : 200mm Ventilator HS (P.B) White or equivalent).

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.

Upto 450 mm sweep

Supplying of Insulation Tape make Pressfit or equivalent.

Supplying and drawing following sizes of PVC insulated al. Conductor, twin core cable in the existing surface/ recessed PVC conduit including connection etc. as required, Make: Polycap or equivalent).

Service cable 6 Sq.mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on surface as required.

Upto 35 sq. mm

Installation, testing and commissioning of Feeder boxes and interconnection with loop cables, Incoming & outgoing cables connections with following acessories including making end termination with Aluminium lugs and bolt & nuts for existing cables etc as required and as directed by Engineer -in- charge .

Fixing following way, MCB Sheet metal enclosure/MCB DB, 240 V, on surface, complete with interconnections etc. as required. (But without MCB/RCCB/Isolator).

6 way / 8 way

Fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.