Certain repair work to steel and wooden furniture including painting and polishing at Mil Stn Beas under GE Kapurthala

Amount

REPAIR & PAINTING TO ALMIRAH STEEL LARGE Removing of old unserviceable shelves and S&F of new 1mm thick PGI Sheet shelves and fixing in position complete all as specified and directed by Engr-in-Charge. FD-1031

M&L for welding to steel Almirah large where required not exceeding 2.5cm in length of all complete all as specified and directed by Engr-in-Charge. FD-1031

Removing of old unserviceable/broken legs and S&F new legs out of 1.00mm thick PBI sheet complete all as shown on Drg and complete all as specified and directed by Engr-in-Charge. FD-1031

Removing of old unserviceable locks and S&F new locks to steel almirah large, complete all as specified and directed by Engr-in-Charge. FD-1031

All as per Srl item No 04 above but CP handle (as per existing size), complete all as specified and directed by Engr-in-Charge. FD-1031

Removing of old unserviceable paints and painting of steel Almirah large with two coats of synthetic enamel paint in side and out side including prep of surfaces complete all as specified and directed by Engr-in-Charge. FD-1031

REPAIR TO ALMIRAH STEEL MEDIUM Removing of old unserviceable shelves and S&F of new 1.00 mm thick PBI Sheet shelves and fixing in position complete all as specified and directed by Engr-in-Charge. FD-1032

M&L for welding to steel Almirah where required n.exc 2.5 cm in length complete all as specified and directed by Engr-in-Charge. FD-1032

Removing of old unserviceable/broken legs and S&F new legs out of 1.00 mm thick PBI Sheet complete all as shown on drg and complete all as specified and directed by Engr-in-Charge. FD-1032

Removing of old unserviceable locks and S&F new locks to steel Almirah medium, complete all as specified and directed by Engr-in-Charge. FD-1032

All as per Srl item No 10 above but CP Handle, complete all as specified and directed by Engr-in-Charge.

Removing of old paints and painting of steel Almirah medium with two coats of synthetic enamel paint in side and out side including preparation of surfaces complete all as specified and directed by Engr-in-Charge. FD-1032.

REPAIR & PAINTING TO CHAIR CB STEEL WITH ARMS Removing of old unserviceable bottom seat and S&F new seat of teak wood of adjusting size duly canned and polished with nut and bolt complete all as specified and directed by Engr-in-Charge. FD-75(M)

All as per Srl item No 13 above but back of Seat, complete all as specified and directed by Engr-in-Charge. FD-75(M)

Removing of old unserviceable arms and S&F new arms rest of teak wood including polishing complete all as specified and directed by Engr-in-Charge. FD-75(M)

M&L for Painting of one coat of synthetic enamel paint OG to chair complete incl preparation of old painted surface complete all as specified and directed by Engr-in-Charge. FD-75(M)

S&F mild steel flat iron 15x3x500mm at front and rear side for stay of seats with two holes for fixing of seat duly welded and painted with two coats of synthetic enamel OG paint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge. FD-75(M)

M&L for welding to chairs where required n.exc 2.5 cm in length complete all as specified and directed by Engr-in-Charge. FD-75(M)

M&L replacement of PVC caps on 25mm conduit pipe of chairs complete all as specified and directed by Engr-in-Charge. FD-75(M)

REPAIR & PANTING TO CHAIR CB STEEL WITH OUT ARMS:- Removing of old unserviceable bottom seat and S&F new seat of teak wood of adjusting size duly canned and polished with nuts and bolts, complete all as specified and directed by Engr-in-Charge. FD-75(M)

All as per Srl item No 20 as above but back of seat,complete all as specified and directed by Engr-in-Charge. FD-75(M)

M&L for painting of one coat of synthetic enamel OG painting to chair complete incl preparation of old painted surface complete all as specified and directed by Engr-in-Charge. FD-75(M)

S&F mild steel flat iron 15x3x500mm at front and rear side for stay of seats with two holes for fixing of seat duly welded and painted with two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge. FD-75(M)

M&L for welding to chairs where required n.exc 2.5 cm in length complete all as specified and directed by Engr-in-Charge. FD-75(M)

S&F in replacement PVC caps on 25mm conduit pipe of chairs complete all as specified and directed by Engr-in-Charge. FD-75(M)

REPAIR & PAINTING TO TABLE 900X600X760 MM STEEL WITH AND WITHOUT DRAWER:- Removing of Unserviceable top of the table and S&F new top of the table made out of 18mm thick pre-laminated MDF Board natural teak shade including 3mm thick teak wood edging complete all as specified and directed by Engr-in-Charge. FD-1007/1008

Removing of old unserviceable legs /stiffener and S&F new legs/stiffener out of 25mm sq tube 1.6 mm thick and fixing in position complete all as specified and directed by Engr-in-Charge. FD-1007/1008

M&L for painting of table with drawer with one coat of synthetic enamel paint over a coat of complete all as specified and directed by Engr-in-Charge. FD-1007/1008

All as per Srl items 28 above but table without drawer, complete all as specified and directed by Engr-in-Charge. FD-1007/1008

Repair to broken drawer complete all as shown on Drg and complete all as specified and directed by Engr-in-Charge. FD-1007/1008

M&L for welding to the table where reqd n.exc 2.5cm in length each complete all as specified and directed by Engr-in-Charge. FD-1007/1008

S&F hard rubber shoe of best approved quality (as per existing size) complete all as specified and directed by Engr-in-Charge. FD-1007/1008

CHAIR VARANDAH:- Recanning of Chair Varandah with half round plastic cane 4 mm wide best quality in Godrej pattern as shown on drg including two coats of white synthetic enamel paint to Chair Varandah complete all as specified and directed by Engr-in-Charge. FD-256

S&F hard rubber shoes suitable for chair Varandah complete all as specified and directed by Engr-in-Charge. FD-256

M&L for welding to Chair Vareandah where required n.exc 2.5cm in length complete all as specified and directed by Engr-in-Charge. FD-256

REPAIR & PAINTING TO TABLE OFFICER STEEL Removing of Unserviceable top of the table and S&F new top of the table made out of 18mm thick pre-laminated MDF Board natural teak shade including 3mm thick teak wood edging complete all as specified and directed by Engr-in-Charge. FD-1003

Removing of old unserviceable legs /stiffener and S&F new legs/stiffener out of 25mm sq tube 1.6 mm thick and fixing in position complete all as specified and directed by Engr-in-Charge. FD-1003

M&L for painting of table office clk steel with one coat of synthetic enamel paint over a coat of complete all as specified and directed by Engr-in-Charge. FD-1003

Repair to broken drawer complete all as shown on Drg and complete all as specified and directed by Engr-in-Charge. FD-1003

M&L for welding to the table where reqd n.exc 2.5cm in length each complete all as specified and directed by Engr-in-Charge. FD-1003

S&F hard rubber shoe of best approved quality (as per existing size) complete all as specified and directed by Engr-in-Charge. FD-1003

Replacement of old UNSV Plywood of Charpoy GI Pipe Removing of UNSV plywood from Charpoy GI Pipe and tightning of complete charpoy and S&F of New plywood (BWR) 12mm thick size 2000x900mm fixed with 10 nos bolts & nuts including washers (3 nos on long rail & 2 nos on short rail each) including S&F flat iron stiffeners/supports 3 nos made out of 40x4mm flat iron, 850mm long complete all as specified and directed by Engr-in-Charge. Plywood shall be ISI marked and shall be Make- Duraply/Kitply/ Archid/Century/Greenply FD-220

REPAIR & PAINTING TO TEAPOY VERANDAH Removing of old unserviceable top and S&F new top made out of 18mm to 20mm prelaminated MDF board with PVC edging around complete all as per drg complete all as specified and directed by Engr-in-Charge. FD-255

M&L for two coats painting of synthetic enamel paint white shade including preparation of old painted surface complete all as per drg and complete all as specified and directed by Engr-in-Charge. FD-255

M&L for welding of steel frame where required n.exc 2.5 cm in length complete all as specified and directed by Engr-in-Charge. FD-255

S&F PVC shoes fixed on 20mm dia conduit pipe complete all as specified and directed by Engr-in-Charge. FD-255

REPAIR & PAINTING TO TABLE OFFICE CLK STEEL Removing of Unserviceable top of the table and S&F new top of the table made out of 18mm thick pre-laminated MDF Board natural teak shade including 3mm thick teak wood edging complete all as specified and directed by Engr-in-Charge. FD-1004

Removing of old unserviceable legs /stiffener and S&F new legs/stiffener out of 25mm sq tube 1.6 mm thick and fixing in position complete all as specified and directed by Engr-in-Charge. FD-1004

M&L for painting of table office clk steel with one coat of synthetic enamel paint over a coat of complete all as specified and directed by Engr-in-Charge. FD-1004

Repair to broken drawer complete all as shown on Drg and complete all as specified and directed by Engr-in-Charge. FD-1004

M&L for welding to the table where reqd n.exc 2.5cm in length each complete all as specified and directed by Engr-in-Charge. FD-1004

S&F hard rubber shoe of best approved quality (as per existing size) complete all as specified and directed by Engr-in-Charge. FD-1004

CHAIR EASY Replacement of old unserviceable legs with new Shisham wood legs well seasoned free from shake and knots complete all as per drg, acomplete all as specified and directed by Engr-in-Charge. FD-17/229

All as per Srl item No 53 above but side/front/rear rails of cane seat with 3mm dia hole for Recanning, complete all as specified and directed by Engr-in-Charge. FD-17/229

All as per Srl item No 53 above but back bottom size- 480 x20 x100mm, complete all as specified and directed by Engr-in-Charge. FD-17/229

All as per Srl item No 53 here-in-before but stiffener of sizes 50 x 25 x 500mm, complete all as specified and directed by Engr-in-Charge. FD-17/229

All as per Srl item No 53 here-in-before but arms of size as shown on drg, complete all as specified and directed by Engr-in-Charge. FD-17/229

M&L for melamine polishing to chair easy complete all as per drg, complete all as specified and directed by Engr-in-Charge. FD-17/229

Re-canning of Chair Easy with half round plastic cane of 2 MM wide best Quality woven in Godrej pattern with 4mm wide plastic cane all-around border all as shown on drg and acomplete all as specified and directed by Engr-in-Charge. FD-17/229

TABLE CENTRE Replacement of old unserviceable top by providing new 18/19mm thick pre-laminated MDF Board natural teak shade including 3mm thick teak wood edging all round complete all as per drawing, complete all as specified and directed by Engr-in-Charge. FD-274

Replacement of old unserviceable legs with new Shisham wood leg well seasoned free from shakes and knots ccomplete all as specified and directed by Engr-in-Charge.

All as per Srl item No 61 above but long rail, complete all as specified and directed by Engr-in-Charge. FD-274

All as per Srl item No 61 above but short rail, complete all as specified and directed by Engr-in-Charge. FD-274

M&L for melamine polishing to table centre complete all as shown on drg, complete all as specified and directed by Engr-in-Charge. FD-274

TABLE PEG Replacement of old unserviceable top by providing new top of 18/19mm thick pre-laminated MDFBoard natural teak shade including 3mm thick teak wood edging all round complete all as specified and directed by Engr-in-Charge, and as shown on drawing. FD-277/384

Replacement of old unserviceable legs with new Shisham wood legs well seasoned free from shakes and knots complete all as per drg and all as specified and directed by Engr-in-Charge. FD-277/384

All as per Srl item No 66 above but long rail, complete all as specified and directed by Engr-in-Charge. FD-277/384

All as per Srl item No 66 above but short rail, complete all as specified and directed by Engr-in-Charge. FD-277/384

M&L for melamine polishing to table peg complete all as shown on drg, all as specified and directed by Engr-in-Charge. FD-277/384

TABLE DINNING 6 PERSON:- Replacement of old unserviceable top by providing new 18/19mm thick pre-laminated MDF Board natural teak shade including 3mm thick teak wood edging around complete all as shown on drg and all as specified and directed by Engr-in-Charge. FD-273

Replacement of old unserviceable leg with new shisham wood leg well seasoned free from shake and knots complete as per drg, all as specified and directed by Engr-in-Charge. FD-273

All as per Srl item No 71 above but top long rail, complete all as specified and directed by Engr-in-Charge. FD-273

All as per Srl item No 71 above but top short rail, complete all as specified and directed by Engr-in-Charge. FD-273

M&L for malemine polishing of table dinning for 6 persons complete as shown on drg, all as specified and directed by Engr-in-Charge. FD-273

SIDE BOARD Removing of old unserviceable frame short rail and supply & fixing new short rail made of Ist class hard wood (shisham) duly smoothed, size and shape as shown on drg complete all as specified and directed by Engr-in-Charge. FD-1112

Removing of old unserviceable frame long rail and supply & fixing new long rail made of Ist class hard wood (shisham) duly smoothed, size and shape as shown on drg complete all as specified and directed by Engr-in-Charge. FD-1112

Removing of old unserviceable back and supply & fixing new back made out of commercial ply wood 6mm thick confirming to ISI complete all as specified and directed by Engr-in-Charge. FD-1112

Removing of old unserviceable top of side board and S & F new top made out of pre-laminated particle board 18mm thick natural teak shade (Exterior gde) confirming to ISI provided with 4mm thick beading of teakwood on exposed edges complete all as specified and directed by Engr-in-Charge. FD-1112

Removing of old unsv knob and S & F new M.S. Knob 25mm dia dark brown coloured complete all as specified and directed by Engr-in-Charge. FD-1112

Smoothening of all exposed surfaces of side board to direct vision and applying two coats of French polish except pre-laminated melamine faced particle board complete all as specified and directed by Engr-in-Charge. FD-1112

TABLE DRESSING LADIES WITH MIRROR Removing of old unserviceable top & supply & fixing new top with MDF Board 18mm thick duly covered with plastic laminated sheet 1.00mm thick of natural teak shade. Edging of size 19mm x 4mm of teak wood shall be fixed around the table top duly smoothed and French polished complete all as specified and directed by Engr-in-Charge. FD-378

Removing of old unserviceable bottom & supply & fixing new bottom made out of ply wood one side teak face 18mm thick complete all as specified and directed by Engr-in-Charge. FD-378

Removing of old unserviceable both sides of table and supply & fixing new sides with MDF Board 12mm thick duly covered with plastic laminated sheet 1.00mm thick of natural teak shade complete all as specified and directed by Engr-in-Charge. FD-378

Removing of old unserviceable back and supply & fixing new back made out of plywood commercial 6mm thick confirming to ISI complete all as specified and directed by Engr-in-Charge. FD-378

Removing of old unserviceable plywood of drawer and supply & fixing new ply wood commercial 4mm thick conforming to ISI complete all as specified and directed by Engr-in-Charge. FD-378

Removing of old unserviceable knob and supply & fixing new M.S. knob 25mm dia dark brown coloured complete all as specified and directed by Engr-in-Charge. FD-378

Removing of old unserviceable glass and supply & fixing new sliding glass 4mm thick with aluminum channel, size and shape as shown on drg complete all as specified and directed by Engr-in-Charge. FD-378

Removing of old unserviceable mirror and S&F new looking mirror for table dressing ladies (size 1220x360x5mm) thick electro copper plated duly fixed in shisham wood frame and back side covered with plywood commercial 4mm thick confirming to ISI, wooden frame shall be french polished complete all as specified and directed by Engr-in-Charge. FD-378

Smoothening of old & new external surfaces with sand paper removing of balck sots and matching of the newly fitted components with original shade by polishing the complete all as specified and directed by Engr-in-Charge. FD-378

CHAIR WRITING Replacement of old unserviceable front leg by providing well seasoned Shisham wood duly smoothed, size and shape as shown on drg, complete all as specified and directed by Engr-in-Charge. FD-250/280

All as per Srl item No 90 above but rear leg, complete all as specified and directed by Engr-in-Charge. FD-250/280

All as per Srl item No 90 above but seat frame and S&F new seat frame bottom made of 1st class hard wood (Shisham) duly cane hole size and shape as shown on drg, complete all as specified and directed by Engr-in-Charge. FD-250/280

All as per Srl item No 90 here-in-before but stiffeners, complete all as specified and directed by Engr-in-Charge. FD-250/280

All as per Srl item No 90 here-in-before but arms, complete all as specified and directed by Engr-in-Charge. FD-250/280

M&L for malemine polishing of chair writing complete all as specified and directed by Engr-in-Charge. FD-250/280

Re canning of Chair Writing with half round plastic cane of 2 MM wide best Quality woven in Godrej pattern with 4mm wide plastic cane all around border all as shown on drg and complete all as specified and directed by Engr-in-Charge. FD-250/280

TABLE 900X600X760 MM WITH OR W/O DRAWERS Replacement of old unserviceable top by providing new 18/19mm thick pre-laminated MDF Board natural teak shade including 3mm thick teak wood edging all round complete all as specified and directed by Engr-in-Charge. FD-223, 224.

Replacement of old unserviceable leg with Shisham wood leg well seasoned free from shakes and knots all as per drg, complete all as specified and directed by Engr-in-Charge. FD-223, 224.

All as per Srl item No 98 above but top long rail, complete all as specified and directed by Engr-in-Charge. FD-223, 224.

All as per Srl item No 98 above but top short rail, complete all as specified and directed by Engr-in-Charge. FD-223, 224.

All as per Srl item No 98 above but stiffener, complete all as specified and directed by Engr-in-Charge. FD-223, 224.

Replacement of old and broken drawers of table by providing new drawers complete all as per drg and specified and as directed made out of 18/19mm thick pre-laminated particle board natural teak shade at the sides and the bottom of the drawers shall be of 6mm plywood commercial type complete duly fitted with fancy type approved knobs complete all as specified and directed by Engr-in-Charge. FD-223, 224.

M&L for melamine polishing to table 900X 600X760mm without or with drawer complete all as specified and directed by Engr-in-Charge. FD-223, 224.

CHAIR DINING Removing of old unserviceable front leg & S&F new front leg made of 1st class hard wood (Shisham) duly smoothed, size and shape as shown on drg, complete all as specified and directed by Engr-in-Charge. FD-1105 & FD-228.

All as per Srl item No 104 here in before but rear leg, complete all as specified and directed by Engr-in-Charge. FD-1105 & FD-228.

All as per Srl item No 104 above but side /front /rear rails of cane seat with 3mm dia hole for re-canning, complete all as specified and directed by Engr-in-Charge. FD-1105 & FD-228.

All as per Srl item No 104 here-in-before but stiffener complete all as specified and directed by Engr-in-Charge. FD-1105 & FD-228.

M&L for malemine polishing of chair dinning complete all as specified and directed by Engr-in-Charge. FD-1105 & FD-228.

Re canning of Chair Dining with half round plastic cane of 2 MM wide best Quality woven in Godrej pattern with 4mm wide plastic cane all-around border complete all as specified and directed by Engr-in-Charge. FD-1105 & FD-228.

TEAPOY Replacement of old unserviceable top by providing new top of 18/19mm thick pre-laminated MDF Board natural teak shade including 3mm thick teak wood edging all-round complete all as specified and directed by Engr-in-Charge. FD-278.

Replacement of old unserviceable legs with new Shisham wood legs duly smoothed, size and shape as shown on drg, complete all as specified and directed by Engr-in-Charge. FD-278.

All as per Srl item No 111 above but long rail, complete all as specified and directed by Engr-in-Charge. FD-278.

All as per Srl item No 111 above but short rail, complete all as specified and directed by Engr-in-Charge. FD-278.

M&L for melamine polishing to table Teapoy complete all as specified and directed by Engr-in-Charge. FD-278.

TABLE BED SIDE Removing of old unsv legs with Teak wood (MP) leg 40 x 40 mm duly smoothed, size and shape as shown on drg, complete all as specified and directed by Engr-in-Charge. FD-276.

All as per Srl item No 115 above but top fixing new top 12mm thick teak wood size- 450 x230mm wide complete all as specified and directed by Engr-in-Charge. FD-276.

Removing of old unserviceable back 6mm thick plywood and fixing new 6mm thick plywood commercial complete all as specified and directed by Engr-in-Charge. FD-276.

Removing of old UNSV Bottom teak wood and New bottom teak wood all complete all as per drg, complete all as specified and directed by Engr-in-Charge. FD-276.

M&L for melamine polishing to Table bed side complete all as specified and directed by Engr-in-Charge. FD-276.

BED PLYWOOD TOP Removing of old unsv head board with legs and S&F new head board made of Shisham wood covered with plywood 4mm thick one side teak faced on front side and 6mm thick commercial plywood on back of head board and legs of Shisham wood including 4 Nos FMN clamps and polishing complete all as specified and directed by Engr-in-Charge as shown on drg FD-246.

All as per Srl item No 120 above but foot board complete all as specified and directed by Engr-in-Charge. FD-246.

Removing of old unsv long rail and S&F new Shisham wood long rail of suitable size complete all as shown on drg and complete all as specified and directed by Engr-in-Charge. FD-246.

Removing of old unserviceable top and S&F new top of 12mm thick ply wood commercial with screws complete all as specified and directed by Engr-in-Charge. Plywood shall be ISI marked. FD-246.

S&F in replacement MS clamps of size 40mm width x4mm thick x 300mm long manufacturing in L shape incl 2 holes on both sides for fixing to locking the head/foot board with long rails complete all as specified and directed by Engr-in-Charge. FD-246.

Preparation of surfaces by removing the scratches spot and dots etc with abrasive cloth and applying one coat of olive green synthetic enamel paint of approved quality for outside of steel Almirah medium with shelf complete all as specified and directed by Engr-in-Charge. FD-1032

Preparation of surfaces by removing the scratches spot and dots etc with abrasive cloth & matching the colour with Raw/burnt sena & polishing with french polish upto standard quality for Bed Hard complete all as specified and directed by Engr-in-Charge. FD-246

All as per Ser No 126 here in before but Chair Writing, complete all as specified and directed by Engr-in-Charge. FD-280

All as per Ser No 126 here in before but Chair Dining, complete all as specified and directed by Engr-in-Charge. FD-228/1105

All as per Ser No 126 here in before but Chair Easy, complete all as specified and directed by Engr-in-Charge. FD-229

All as per Ser No 126 here in before but Table Peg, complete all as specified and directed by Engr-in-Charge. FD-384

All as per Ser No 126 here in before but Table Bed Side, complete all as specified and directed by Engr-in-Charge. FD-276

All as per Ser No 126 here in before but Table Center, complete all as specified and directed by Engr-in-Charge. FD-274

All as per Ser No 126 here in before but Table Dining 6 Person, complete all as specified and directed by Engr-in-Charge. FD-273

All as per Ser No 126 here in before but Table Dressing Ladies complete all as specified and directed by Engr-in-Charge. FD- 378

All as per Ser No 126 here in before but Teapoy Wooden complete all as specified and directed by Engr-in-Charge. FD-382

Preparation of surfaces by removing the scratches spot and dots etc with abrasive cloth and applying one coat of white synthetic enamel paint of approved quality for Chair Verandah complete all as specified and directed by Engr-in-Charge. FD-256

Preparation of surfaces by removing the scratches spot and dots etc with abrasive cloth and applying one coat of white synthetic enamel paint of approved quality for Teapoy Verandah complete all as specified and directed by Engr-in-Charge. FD-245

Preparation of surfaces by removing the scratches spot and dots etc with abrasive cloth and applying one coat of olive green synthetic enamel paint of approved quality for steel Almirah large with shelf ccomplete all as specified and directed by Engr-in-Charge. FD-1031

All as per Ser No 138 here in before but outside of Table office clerk steel complete all as specified and directed by Engr-in-Charge. FD-1004

All as per Ser No 138 here in before but outside of Table Officer steel complete all as specified and directed by Engr-in-Charge. FD-1003

Preparation of surfaces by removing the scratches spot and dots etc with abrasive and applying one coat of olive green/Grey/Blue Sky synthetic enamel paint of approved quality for Chair steel tubular with & w/o Arms complete all as specified and directed by Engr-in-Charge. FD-75 (M)

M/S NEW SUBBERWAL FURNISHERS