SPECIAL REPAIRS TO BLDG NO P 663 AT HERITAGE MESS SCHOOL OF ARTY UNDER THE AOR OF GE DEOLALI

Amount

Dismantling hearth or wall tiling of any description, size and thickness including cement mortor bedding , removing rubbish off the premises etc complete all as directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n exc. 15cm thickness (below or above ground level) complete all as specified and directed

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate ) as in subase finished to receive floor treatment etc complete all as directed.

M&L non skid Virified tiles 8 TO 10mm thick (square/ rectangular/strip) polished, area of each tiles not exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors including screed bed 15mm thick in Cm 1:6 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match

M&L non skid ceramic tile 7 to 8mm thick (square/ rectangular/strip) polished, area of each tiles not exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors including screed bed 15mm thick in Cm 1:6 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match

M&L for GVT/DVT of size each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm 8-10mm thick (coloured) of superior quality with highligter tiles fixed on vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry over 10 mm thick rendering in CM (1:4) and pointed in coloured cement to match complete all as specified and directed.

Demolition of stone slabs, paving stones and tiles of any description and thickness in floors, aprons, laid, bedded and pointed in any mortar complete all as specified and directed.

M&L for Z black Granite (of any type) 15-18mm thick (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including 15mm thick screed bed in CM (1:6), complete all as specified and as directed.

M & L for 15mm thick Artficial Granite (of any type/colour as approved by GE) work in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including Screed bed or bedding layer of mortar 10 mm thick for laying floor finishes complete all as specified.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

Demolition wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards / slabs / blankets, any thickness, including cover fillets all as specified and directed.

S&F 5 to 8 mm thick interlocking PVC hollow false ceiling fixed with self tapping screw over and including aluminium hollow section 40MMX40MM and hanging wire of approved colour and design complete all as specified as per manufacturerer instruction and directed by Engr-in-Charge Make:- Placopan,Sintex/RAJSHREE

Providing and applying plaster of paris (POP) 5-6 mm thickness over plastered surface to prepare the surface even and smooth.

M&L for 20-25mm thick POP moulding /cornices of size exc 75mm but n.exc 150mm of approved design complete all as specified and directed

Providing and fixing Gypsum Board false ceiling 12mm thick fixed with screw including GI frame work odf section 40x60mmx1.25mm and as per manufacturers instructions

Demolition of brick work / stone boulders masonry built in cement mortar incl all Quoins , archeas, pillars etc bu exc cluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

M&L for Brickwork with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and as directed.

All as per item No.02 above but except bricks.

Taking down Chowkhats or frames with shutters (without taking off shutters from the frames) n exc 1.5 Sqm each complete all as specified and directed

Taking down chowkats or frames with Shutters (without taking off shutters from the frame 1.50 Sqm and n exc 4.00 Sqm each complete all as specified and directed

Taking down Shutters of any description exc 1 Sqm but not exc 2 Sqm each complete all as specified and directed

M&L for cement concrete 1:2:4 type B-1, using 20mm graded stone aggregate as in coping, bed blocks, filling of hold fast PCC or similar works including formwork complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed.

Taking up or down 20mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed.

Taking up or down 25mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed.

S&F 15mm boreTubes, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

S&F 20mm boreTubes, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

S&F 25 mm boreTubes, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Refixing old steel tubing and connections in new or old position 15mm to 40mm (Walls, ceiling, floors, etc.)

Cutting chases in Stone, concrete block or slab walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth all as specified and as directed.

S& F Ply board hardwood 2nd class,clean sawn, plain,18mm thick, feather edged cut as required to cut to shape and fixed complete all as specified and directed

S& F 1mm thick sunmica coloured/design/texure of decorative laminated layer that is placed on top of wood/ply boards with adhessives as per manufactured instructions

S&F for teak wood 2 to 3mm thick is placed on top of wood/ply board with adhessives as per manufacred istructions complete all as specified

S&F 28-30 mm thick moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side palin with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified

S&F 30mm thick flush door shutters solid core construction with block board core and if one face is covered with decrative face veneer with lipping/frame to match plywood face panels commercial type including provision of glass in the flush shutter on both sides etc complete all as specified and directed.

teak wood melamet polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats

S&F 5 mm ordinary glass thick area exc 0.50 Sqm in each pane with etching of logo in the glass panel of approved design complete all as specified and directed

S& F brass Mortice lock six livers of size 230mm x 75mm, cylinder 75mm, brass solid body decorative type handles 150mm complete all as specified and as directed.

S&F 300 mm long Extruded brass handles decorative designer type, polished complete all as specified and as directed.

S&F 125 mm long Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, typeB-11 complete all as specified and as directed.

S&F 250mm size Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed.

S&F 450mm size Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed.

S&F factory made 100 % solid wood plastic composite (WPC) flush type shutter of 18mm thickness one side laminate of denisity 600 kg per cum manufactured by ISO-9000 certified company using for shutter cillicia ply 18mm thick and fixed with frame. all edges shall be covered with 2mm thick bonding tape or 90 degree edge bent finish or PVC lining of plain/prelim coloured PVC sheet using etc complete as per manufacture specification.Make : ECHON/Sintex/Rajshree/Navratan

Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing

S&F auto soft closing hinges 35 mm of 0 crank( KH-001) OR 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters Make :Hexa, Hettich, Hafele

S&F Ball bearing runners 45 mm Telescopic channel (KTS-20) full extension load capacity 50 kgs, Make :Hexa, Hettich, Hafele

S&F Hasp and staple, safety type,brass with mild steel hinge pin including bolt to hinge plate and fixed with screws 125mm size.

S&F in repair 25 mm stainless steel curtain rod complete all as specified and directed by Engr-in-charge.

S&F SS heavy duty wood finish decorative brackets suitable for 25mm dia curtain rod (minimum projection from wall 75mm) fixed in wall including drilling, rawl plug, screws etc complete all as specified and directed. Note: Curtain rod shall be measured and paid separately

Material and labour for water proofing treatment to sunken slab, walls, etc, and shall be carried out as specified below and as directed:- (a) Demolition of Cement concrete/brick bats filled on sunken slab upto mother slab including removing and Clean the sunken portion of toilet / Baths/ WCs/ Kitchen thoroughly to remove laitance, dirt, dust etc. (b) Brushing cement slurry with 1.2 kg of cement per square metre duly blended with & including water proofing compound. (c) 15 mm thick (Average thickness) plaster in cement mortar (1:4) mixed with water proofing compound on sunken surface including walls. The corner of sunken portion shall be rounded in concave shape and adequate slope shall be made during plastering to accommodate sump pipe and curing the sunken portion with water minimum for 48 Hrs by ponding. (d) applying primer to the plastered surfeace and Providing and laying 3 mm thick APP modified water proofing membrane double layered weighing not less than 3.0 Kg / Sqm reinforced with non woven polyester mat all as specified procured from any one of the approved manufacturer's instructions (Note:- Floor area shall be considered for measurement & payment purpose)

Material and labour for water proofing treatment to sunken slab, walls, etc, and shall be carried out as specified below and as directed:- (a) Demolition of Cement concrete/brick bats filled on sunken slab upto mother slab including removing and Clean the sunken portion of toilet / Baths/ WCs/ Kitchen thoroughly to remove laitance, dirt, dust etc. (b) Brushing cement slurry with 1.2 kg of cement per square metre duly blended with & including water proofing compound. (c) 15 mm thick (Average thickness) plaster in cement mortar (1:4) mixed with water proofing compound on sunken surface including walls. The corner of sunken portion shall be rounded in concave shape and adequate slope shall be made during plastering to accommodate sump pipe and curing the sunken portion with water minimum for 48 Hrs by ponding. (d) Applying self adhesive type APP based polymeric membrane minimum weighing not less than 3.6 kg/ Sqm and minimum 3 mm thick reinforced with polyester non-woven fabric (e) M&L for PCC 1:7:12 type F2 using brick course agreegates for filling of sunken portion after conceling all menbrane upto FFL and sealing all joints to the entire satisfaction of Engineer-in-Charge. (Note:- Floor area not exc 2.00 Sqm )

S&F LDPE pipe 40mm bore fixed to wall/ceiling with bends/elbow complete all as specified.

S&F in repairs for 150mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall complete all as specified and as directed.

S&F in repair vitreous china rimless back to wall WC of size390X570X365mm with UF soft close slim seat cover, hinges, fixing accessories ,fixing to flushing ceistern(excluding flushing cistern) complete all as specified and directed Make Jaquar cat part No VGS-WHT-81953UF or Eqvl in Kohler/Roca/Grohe

S&F in repair vitreous china rimless FLOOR MOUNTED WC of size 390X570X 365mm with UF soft close slim seat cover, hinges, fixing accessories ,fixing to flushing ceistern(excluding flushing cistern) complete all as specified and directed Make Jaquar cat part No vgs-WHT-81151 or Eqvl in Kohler/Roca/Grohe

S & F in repairs concealed Flush cistren 32 mm concealed body with floor mounting frame,istallation kitand P-type drain pipe connection set for wall hung wc (with exposed Actuation plate kit OF CAT PART NO JCP-CHR-352415)including all joints and making good to the floor complete all as specified and directed Make Jaquar cat part No FLV-CHR-1073FP or Eqvl in Kohler/Roca/Grohe

S&F 15mm bore brass chromium plated long body bath tub spout with flange and screwed down to GI pipe complete all as specified and directed Make Jaguar Cat part No SPJ-35463PM OR EQVL IN Kohlar, Roca/Grohe

S&F 15mm bore chromium plated brass connection 450mm long with 2 Nos connector incl PVC washer complete Make Jaquar Code ALD-805B OR EQVL IN Kohlar, Roca/Grohe

S&F Maze Overhead Shower 300X300mm Square Shape Single Flow (Body & Face Plate Stainless Steel with Chrome Finish) with Rubit Cleaning System including 600mm shower arm, fixing to steel pipe or union complete all as specified Make Jaguar (Cat part No : OHS-1639 and SHA -479L 600) OR EQVL IN Kohlar, Roca/Grohe

S&F brass chromium plated Exposed part Kit of single lever WHB Mixture wall mounted consisting of operating lever, wall flange, nipple and Spout ( Suitable for Item ALD-233) complete all as specified and directed by Engr-in-charge Make : cat Part No:- LYR-38233NK OR EQVL IN Kohlar, Roca/Grohe

S&F Concealed body single lever basin Mixture wall mounted with cartridge sleeve but without exposed parts and fixing to steel pipe or union complete all as specified and directed by Engr-in-charge Make Jaquar cat part No ALD-233N OR EQVL IN Kohlar, Roca/Grohe

S&F 15mm bore brass chromium plated long body bath tub spout with flange and screwed down to GI pipe complete all as specified and directed Make Jaguar Cat part No SPJ-35429PM OR EQVL IN Kohlar, Roca/Grohe

S&F 15mm bore brass chromium plated angle cock fancy tYpe with CP brass cup and screwed down to GI pipe Make:Jaquar Cat Part No LYR-38053 OR EQVL IN Kohlar, Roca/Grohe

S&F in repair Towel Rack with Lower Hanger (Stainless Steel) with hook complete all as specified and directed Make Jaguar (Cat Part No: AHS-CHR-1581H) OR EQVL IN Kohlar, Roca/Grohe

S&F in repair Corner glass shelf ( with Brackets) fixed with rawl plug and washer complete all as specified and directed by Engr-in-charge Make cat part No ACN-1173 of Jaquar OR EQVL IN Kohlar, Roca/Grohe

S&F chromium plated toilet paper holder fixed on wall with PVC Rawal plug complete all as directed Make Jaquar code no-ACN-CHR-1151N OR EQVL IN Kohlar, Roca/Grohe

S&F Double Arm wall mounted Reversible magnifying (X3) Pivotal mirror fixed with rawl pug and washer complete all as specified and directed By Engr-in-charge Make:- cat Part No ACN-1193N of Jaquar OR EQVL IN Kohlar, Roca/Grohe

S&F in repairs 15mm bore fancy typeCONCEALED STOP COCK WITH BODY PART, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as directed Make Jaquar cat part No LYR-38083K AND ALD-089FT OR EQVL IN Kohlar, Roca/Grohe

S&F in repairs 15mm bore fancy type bib tap with wall flange, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as directed Make Jaquar cat part No LYR-38037 AND OR EQVL IN Kohlar, Roca/Grohe

S&F IN Repair 15mm maze hand shower of size 95x95 mm squre shape single flow(face plate stailess steel and ABS body ) with rubbit cleaning system with an incl flexible tube 8mm dia and 1.5mtr long with nuts and premium wall bracket and hand shower fixed wall outlet with shower hook in square shape complete all as directed Make Jaquar cat part No HSH 1655 AND SHA 566S & SHA 549D8 OR EQVL IN Kohlar, Roca/Grohe

S&F In repair s Aquamax exposed part kit of thermostatic shower mixer with 3 way diverter (suitable mixer 3 way diverter (suitable for ALD 683)Jaquar Cat Part No ARI39683K OR EQVL IN Kohlar, Roca/Grohe

S&F Concealed body OF THERMOSTATIC shower mixture with three way diverter but without exposed parts and fixing to steel pipe or union complete all as specified and directed by Engr-in-charge Make Jaquar cat part No ALD-683N OR EQVL IN Kohlar, Roca/Grohe

S&F in repair body shower concealed type 130x120mm rectangular shape with instalation box and rubit cleaning system complete Make Jaquar cat part No bsh -1771 OR EQVL IN Kohlar, Roca/Grohe

S&F in repair stainless steel chromium plated anticockroach grating jali 600x100 mm fixed complete all as spcified and directed by Engr-in-charge

S&F in repair stainless steel chromium plated towel ring complete all as specified and directed Make Jaquar cat part No vgs-ACN1121BN OR EQVL IN Kohlar, Roca/Grohe

S&F in repair stainless steel chromium plated SOAP DISH complete all as specified and directed Make Jaquar cat part No vgs-AKP-35731P OR EQVL IN Kohlar, Roca/Grohe

S&F in repair stainless steel chromium plated SOAP dispenser with glass bottle complete all as specified and directed Make Jaquar cat part No vgs-ACN1135N OR EQVL IN Kohlar, Roca/Grohe

S&F in repair stainless steel chromium plated tumblar holder complete all as specified and directed Make Jaquar cat part No vgs-ACN1141N OR EQVL IN Kohlar, Roca/Grohe

S&F decorative type WHB Vanity floor mounted made out of coloured PVC board of size 900x600/900 complete all specified and approved by GE Make: Cat part No. CARINE of Somany of Somany or Equivalent in Hindware/Parryware/Cera Make: Only vanity required. Wash basin and Miror not required.

S&F in repair vitreous china Wash Basin counter Top 600x400x185mm including stainless steel bottle trap AND 32MM waste coupling and 40 mm dia GI pipe up to Floor trap complete all as specified and directed by Engr-in-Charge Make : Cat Part No SLS-WHT-6901 , ALD-727L130 & ALD-769L250X190 of Jaquar OR EQVL IN Kholar, Roca/Grohe

S&F wall to wall shower enclosure with one fixed glass and one openable glass including stainless steel 304 grade fittings and fixture such as hinges, top rail, cleats, handles towel rail , 10mm thick toughned glass thick chrome finished complete fixing as per manufacturer instruction incldg Artificial Marble ledge 1601-2000mm complete all as specified and directed by Engr-in-charge Make : Cat Part No/Model No 1820W and ESA-WHT-LDG 1620 of Jaquar OR EQVL IN Kholar, Roca/Grohe

S&F 5mm thick looking mirror fixed to wall with glass with teakwood beading fixed to wall complete all as specified and directed by Engr-in-charge

Dismantling of water tanks including disconnecting all connections etc. complete for capacity of tanks .(Exc 500ltrs but n;exc 1000 ltrs)

S&F new rotational moulded polythylene water storage tank (cylindrical/ vertical with closte top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing brass ball valve 25mm bore high pressure with polythene float and fly nut, screwed for iron pipe or brass ferrule complete for tank capacity of: -(Exc 500ltrs but n;exc 1000 ltrs)

Disconnecting existing tanks exc 250 and n.exc 500ltrs, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position.

Disconnecting existing tanks exc 500 and n.exc 1000ltrs, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position.

S & F powder coated aluminium sections for doors, windows, partition including fabrication of frame and shutters and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc. including all accessories such as glazings clips, provn of AC opening and rubber beadings for fixing glass panes in frame complete all as specified by Engr-In- Charge. Note : (i) Glass panes/wire cloth will be measured & paid separately . (ii)The quoted rate shall be inclusive of cost of rubber beading and glazing clips,hinges, handle. However it will be not be weighed and not paid separately. (iii) All other minor details including cost of locking arrangement shall be included in the quoted rate. Make : Hindalco/Indal (Indian Al Coy)/Jindal/Associated Profile & Aluminium Ltd/Ajit India

Taking down Chowkhats or frames with shutters and refixing the same frames and shutters sliding type/openable for taking down and fixing of new wire mesh /glass including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified Note: wire mesh / Glass measured separatly

S & F in repair SS wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staples including takingout old wire mesh from steel window and fixing old steel flats and nut complete all as specified.and directed.

M & L for 4.00mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

S & F Continuous (piano) hinges, mild steel, bright finish or electro galvanised (Width of flaps 40mm)

S & F 75 mm long Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-12 complete all as specified and directed

M&L for painting with two coats of synthetic enamel paint to steel surfaces of any description over 10cm width or girth on untreated steel surfaces over a coat of red oxide primer after preparation of surfaces complete all as specified and directed.

S&F Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed

Taking down cement plaster any description on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for Rendering in 10 mm thick Ready Mix Plaster of Make- ACC’s “ACCOPLAST” / CK Birla’s “AEROCON” / Speed Dry Mix’s “ECO PLASTER” / “MAGIC PLAST” / “BUILDWELL on brick work or concrete surfaces of any description in wall/ceiling etc finished surfaces even and smooth with sogol finish complete all as specifed and directed.

M&L for Rendering in 12mm thick Ready Mix Plaster of Make- ACC’s “ACCOPLAST” / CK Birla’s “AEROCON” / Speed Dry Mix’s “ECO PLASTER” / “MAGIC PLAST” / “BUILDWELL on brick work or concrete surfaces etc finished surfaces even and smooth complete all as specifed and directed.

M&L for complete removal of existing treatment of any type/description from external/internal/ceilings surfaces/walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc with mechanical means/grinder complete all as specified and directed.

M&L for applying two coat of exterior grade acrlic water proof white putty (1.50 mm to 2 mm thick) and applying one coat of exterior water based primer (after complete removal of old finish/newly plastered surface) by using Airless spray techonology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr, the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressue and paint usage and certified by jpaint manufacturer and as mentioned in PS and accessories for applying exterior weather proof, should be able to spray in hard to reach areas and penetration of distemper, on the surface to achieve excellent application using limited manpower complete all as specified and directed. Note : - Sanding of old decorated surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.complete all as specified

M&L for preparation of old /new decorated/plasterd surface of wall applying 1.50 to 2.50mm thick interior grade white putty and applying one coat of primer (after complete removal of old finish/newly plastered surface) by using complete all as specified and directed. Note : - Sanding of old decorated surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.complete all as specified

M&L for preparation of surface of wall and applying two coat of exterior weather proof (on putty surface)100% anti fungal acrylic smooth emulsion with silicon additives that offer anti alge high performance exterior wall finish with 5 years of performance warranty by manufacturer applied by using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacture with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper, should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed. Make: Asian (apex ultima), Berger (wather coat), nerolac (excel total)

M&L for preparation of surface of wall/ceiling applying two coats of Lustre paint done through textured roller (on putty surface) complete all as specified and directed. Note : - Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.

S&F in repair 25mm bore Gun metal gate valves with iron wheel head screwd both ends for iron pipes complete all as specified and directed.

S&F in repair 20mm bore Gun metal, globe or gate valves with iron wheel head screwd both ends for iron pipes complete all as specified and directed.

Dismantling of PVC Pipes with fittings upto 75mm to 110mm dia complete all as specified and as directed.

S&F for 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall complete all as specified and as directed.

S&F for 75mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall complete all as specified and as directed.

S&F PVC (SWR) bend with access door any radius 110mm complete all as specified and directed.

S&F PVC (SWR) bend with access door any radius 75mm complete all as specified and directed.

S&F for 75mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed.

S&F 75 mm PVC (SWR) junction single T equal or unequal complete all as specified and directed .

S&F in repairs 75mm bore PVC (SWR) floor trap/Nahani trap plain with grating including jointing with solvent cement complete all as specified and as directed.

Taking down unserviceable copper/aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, socket outlets, ceiling roses, pendent brackets, holders etc.removing marerialso storeforeeping in safe custody or for taking credt and making good disturbed surfaces of walls, floor etc.complete all as directed.

Taking down old MCCB , TPN DBs , SPN DBs, & main switch/ enclosure box of any make and type from the site and making good surface complete all as specified and directed.

Taking down old submain wiring of any size, including coduit and make from the site complete all as specified.

M & L for Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through and including non-metalic rigid new PVC conduit medium grade ISI Marked not less than 20 mm dia and all conduit accessories concealed in wall on surface in ceiling/fixed to roof/truss/columns etc and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuty, fabricated modular metal flush box, concealed in walls with suitable modular inner and outer plate for housing switches , socket out let and fan regulators etc, complete all as specified.

(a) One light /Ceiling fan/exhaust fan point controlled by one switch.

(b) One 3 pin 5 Amps socket outlet point controlled by one No one way switch on same board

(c) One 3 pin 5 Amps socket outlet point controlled by one No one way switch on independent board.

(d) One bell point controlled by one bell push.

(e) One light point controlled by two Nos two way switches

M&L point wiring with PVC unsheathed multi stranded copper conductor cable 2.5 sqmm FRLS 1100 Volts in New PVC concealed conduit medium grade ISI Marked not less than 20 mm dia in new M S steel terminal boxes modular including one run of using 2.5 sqmm FRLS 1100 Volts copper conductor cable as earth continuity connected to common earth for one 15 A switch socket power point, all as specified

M&L switch Modular type 6 Amps one way ISI marked 230V AC complete all as specified.

M&L switch modular type 6 amp SP two way ISI marked complete all as specified.

M&L Modular socket outlet 5 pin 6 Amp socket 2 module ISI marked complete all as specified.

M&L switch bell push Modular type 6 Amps 1W-1 module, ISI marked 230V AC complete all as specified.

M&L switch Modular type 16 Amps one way ISI marked 230V AC complete all as specified.

M&L Modular socket outlet 5 pin 6/16 Amp universal socket 2 module complete all as specified.

Supply & Fix Modular five stepped type electronic fan regulator 2 module ISI marked 230V AC complete all as specified.

M&L bell electric (ding dong) 230 volt, SP all as specified and directed.

M & L for ceiling rose of size 65 X 25 mm surface Bakelite three terminals complete all as specified and as directed.

M&L for submain wiring with two single core PVC insulated FRLS 1100 Volts unseathed stranded copper conductor cable 6 Sqmm in and including new PVC conduit medium grade not less than 20 mm dia, and all conduit accessories concealed in wall on surface in ceiling/fixed to roof/truss/columns etc, for submain wiring and connection complete FRLS 1100 volts unsheathed stranded copper conuctor cable of 6 Sqmm size stranded conductor as earthwire. Note :- (i) Two runs of copper cable and one run of earth wire including PVC conduit shall be measured as one length.

All as per item No - above but with 2 runs of 4 Sqmm cable with one run of 4 Sqmm cable for earthing.

Supply and fixing ceiling fans three blade, Robust and reliable inverter motor (brush less DC Motor) powered by ECM technology, BEE 5 star rating for energy saving, rated Air delivery >220 cum/min, service valve > 6, AC single phase 230/240 V of size 1200 mm sweep including making connection with three core flexible, copper cable pvc insulated of suitable length, complete all as directed. Note: Ceiling Fan must operated on electronic Regulator, it should not be remote operated.

S&f fresh air fan PVC body, air delivery > 800 CMH , 5 number of blades, AC single phase 230/240 V of size 250 mm sweep with louvre fixed complete with suitable size ply by cutting into suitable size as required complete.

S&F sheet metal enclosure single pole and Neutral with a two pin earth plug and socket complete with a MCB SP 20 Amp 230 volts, 50 Hz, 10KA breaking capacity complete.

S&F sheet metal enclosure single pole and Neutral with a two pin earth plug and socket complete with a MCB SP 10 Amp 220 volts, 50 Hz, 10KA breaking capacity, including fixing completly in wall with sutable sand and cement, complete.

S & F water heater storage type Geyser ABS body vertical type with suitable size of fastner and including provision and connecting up of SS braidedpipe with adopter for inlet and outlet water connection having edjustable knob for temperature control and inner tank should be glass line coated, capacity 25 Ltrs, having heating element 2 KW and not less than 5 star rating, suitable for ,230 volt, 50 Hz electric supply complete all as specified and directed .

M &L telephone Point wiring complete with single pin 0.61mm dia copper conductor cable telephone pain taped and rip conforming to ITD specification D-3003 and ITI-113C/114C cable PVC insulated drawn though PVC concealed conduit not less than 20 mm dia for one 2 pin telephone socket out let on independent modular type board.

Supply & Fix in repair RJ-11 Telephone socket with transparent shutter 1 module on phenolic laminated sheet etc as required.

S&F wall mounted LED Light fittings, 4 feet long, with 18 W LED tube rod and box type batten double side connection type complete all as specified and directed.

S&F wall/surface mounted LED fency mirror Light fittings, 9 W, polycarboate housing and integrated electronic driver complete all as specified and as directed.

Supply and fix surface/recess ceiling mounted, round LED downlighter 4 watts, size 75x38mm, with die cast aluminium housing and system wattage of 4 W, system efficacy at luminary level ≥ 80 Lumens/watt, 50000 burning hours, 3000K color temperature with CRI >80, Power Factor > 0.90, Driver should meet IEC compliant for safety with multi stage high Isolate CC-CV operated driver with voltage variation range - 220 to 240 Volts AC, and surge protection of 2.5 KV, and including connecting up with PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete.

Supply and fix surface/recess ceiling mounted, round LED down light fitting 15 watts with die cast aluminium housing and system wattage of 15W, system efficacy at luminary level ≥ 80 Lumens/watt, 50000 burning hours, 6500K color temperature with CRI >80, Power Factor > 0.90, Driver should meet IEC compliant for safety with multi stage high Isolate CC-CV operated driver with voltage variation range - 150 to 270 Volts AC, and surge protection of 2.5 KV, and including connecting up with PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete.

Supply and fixing wall/surface mounted, 5 watt decorative LED picture light fitting complete all as specified

Supply and fixing rgb color LED strips, 22 W warm day light have bright eco-friendly led lights complete all as specified (Each coil 5 Mtr)

Supply and fixing building LED security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

Supply & fix in repair factory made epoxy powder coated Distribution Board TPN-4 ways with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removeable gland plates with knockouts and suitable for one TPN- MCCB 125/160 Amp as incomer and 40 to 63 Amp SP MCBs outgoing complete all as specified and conforming to IS : 8623.

M&L in replacement MCCB 125 Amps, 16 KA , 4P, complete.

Supply and fix MCB DB SPN 8 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete.

M&L MCB SPN 40 Amp "C " curve

M&L MCB SP 6 to 32 Amp "C" curve.

Earthing complete with galvanized mild steel earth plate electrode size 600x600x6mm thick buried directly in ground (Preferably in vertical position) earth pit not less than 2.25 meter below normal ground level with top edge of the earth plate not less 1.5 meter (BGL) connected to galvanized iron earth lead wire 4mm dia by means of bolts, nuts, check nut and washer of galvanized iron including PCC pit in RCC 1:2:4 type B-1, precast RCC cover with suitable handle, excavation and earth work in any type of soil, 20mm bore “medium grade” galvanized iron water tubing fixed with cast iron funnel and wire mesh and 15mm bore “light grade” galvanized iron protection pipe for earth lead wire upto 5m length, charcoal, common salt, complete all as shown in EP No 3 of SSR 2009 part-I, connected to test point complete, all as specified and testing on completion.

S&F pressure booster pump suitable for 4 Nos bathrooms, flow rate upto 1.2 cum per hour, 35 mtr head, 1 HP, suction pipe size 25mm and delivery pipe size 32mm alongwith all accessories such as gate valve, NRV etc. required for successful poeration of the pump complete all as specified and directed. Make:- Grundfos/Kirloskar/Crompton.

S&F fency type wall sconce indoor bedside reading rocker wall light flexible neck, surface mounted warm white complete all as specified.

S&F fency type wall light metel body with bulb holder and bulb of suitable capacity, golden antique color, round shape sconce type suitable for surface mounting in varandah or porch complete all as specified.

Note: Amount of sch of credit of Rs.47133/-will be deducted from total amount of BOQ.

M/S MANISH CONSTRUCTION CO

M/S YOGESH CONSTRUCTION