Composite work of refurbishment of B-Block lecture hall related to Civil, Electrical, HVAC and other allied works at ground floor, Mod Labs, North Site, BARC, Trombay, Mumbai- 400085

GOVERNMENT OF INDIA

Bhabha Atomic Research Centre

Engineering Services Group

Civil Engineering Division

North Site, Trombay

Mumbai – 400 085.

e-TENDER TECHNICAL BID

NAME OF WORK : Composite work of refurbishment of B-Block lecture hall related to Civil, Electrical, HVAC and other allied works at ground floor, Mod Labs, North Site, BARC, Trombay, Mumbai- 400085

NIT No. : BARC/CED/ET/89/2025-2026 DATE 13/02/2026

Sl. No. PARTICULARS REMARKS

I Name of the Agency

II Postal address

III Contact with STD code

IV Fax with STD code

V Name of Contact person

BELOW GIVEN DOCUMENTS TO BE SCANNED AND UPLOAD IN THE WEBSITE https://eprocure.gov.in/eprocure/app WITHIN THE PERIOD OF SUBMISSION. SCAN COPY ATTACHED "YES" OR "NO"

1 Financial Turn Over Certified by CA of Last 3 Years in Rs.

2 Profit & Loss Statement Certified by CA in Rs.

3 Latest Bank Solvency Certificate

4 List of Construction Plants and Machinery ATTACH SCANNED COPY SEPARATELY

5 List of Technical Staff ATTACH SCANNED COPY SEPARATELY

6 Certificates:

i) Registration Certificate if Any, ATTACH SCANNED COPY SEPARATELY

ii) Certificates of Work Experience /Performance certificates ATTACH SCANNED COPY SEPARATELY

iii) PAN (Permanent Account Number) Registration ATTACH SCANNED COPY SEPARATELY

iv) Certificates of Registration for GST ATTACH SCANNED COPY SEPARATELY

v) Certificates of Registration for EPF & ESIC ATTACH SCANNED COPY SEPARATELY

7 Demand Draft/ Pay Order or Banker's Cheque/ FDR or Bank Gurantee of any scheduled Bank Against EMD ATTACH SCANNED COPY SEPARATELY

8 Undertaking that the eligible similar work(s) have not been executed through another contractor on back to back basis as per NIT ATTACH SCANNED COPY SEPARATELY ON AGENCY'S LETTER HEAD

9 UNDERTAKING : I / We, hereby tender for the execution of the work specified for the President of India within the time specified in Schedule “F”, viz., Schedule of Quantities and in accordance in all respects with the specifications, designs, drawings and instructions in writing referred to in Section II of Part A and Clause - 11 of the General Clauses of Contract and with such materials as are provided for, by, and in respects in accordance with, such conditions so far as applicable. ATTACH SCANNED COPY SEPARATELY ON AGENCY'S LETTER HEAD

10 Tender Acceptance letter (Annexure 1) as given in NIT ATTACH SCANNED COPY SEPARATELY ON AGENCY'S LETTER HEAD

11 Undertaking Pursuant to Section 206 AB of the Income Tax Act 1961 (Annexure-2) ATTACH SCANNED COPY SEPARATELY ON AGENCY'S LETTER HEAD

12 GST UNDERTAKING BY FIRMS/AGENCY (Annexure-3) ATTACH SCANNED COPY SEPARATELY ON AGENCY'S LETTER HEAD

13 UNDERTAKING (Annexure-4): "We ______________ (Name of bidder) undertake that we meet the mandatory Local Content (LC) requirement for qualifying as 'Class I Local Supplier' as per the PP-LC Policy, against tender no._________________________. The percentage of Local Content in the bid is ________% ". ATTACH SCANNED COPY SEPARATELY ON AGENCY'S LETTER HEAD

14 FORM OF CERTIFICATE FOR ELIGIBLE SOURCE COUNTRIES : I/We, ………. (Name of the Bidder) …………., have read the NIT clauses regarding restrictions on procurement from a Bidder of a country which shares a land border with India, and I/we am/are not from such a country’’ or, from such a country (indicate country…….), have been registered with Competent Authority and submit a certificate herewith as an evidence of valid registration by the Competent Authority’’. I/We hereby certify that I/We am/are fulfilling all requirements in this regard and eligible to be considered, in accordance to NIT clauses. I/We acknowledge the right of the Employer that absence of such a certificate in the bid, if the Bidder belongs to such country stated above, shall disqualify the Bidder. I/We acknowledge the right of the Employer to terminate the Bidder for false declaration or certificate, along with such other actions as may be permissible under law. ATTACH SCANNED COPY SEPARATELY ON AGENCY'S LETTER HEAD

NOTE: THE BIDDER MUST FILL UP ALL THE SHEETS VIZ. E-TENDER TECHNICAL BID, ANNEXURE A, Completed Similar works and Projects under execution

GOVERNMENT OF INDIA

Bhabha Atomic Research Centre

Engineering Services Group

Civil Engineering Division

North Site, Trombay, Mumbai – 400 085.

NAME OF WORK : Composite work of refurbishment of B-Block lecture hall related to Civil, Electrical, HVAC and other allied works at ground floor, Mod Labs, North Site, BARC, Trombay, Mumbai- 400085

NIT No. : BARC/CED/ET/89/2025-2026 DATE 13/02/2026

ANNEXURE A - STATEMENT OF MEN AND MACHINERY

Sl. No. PARTICULARS REMARKS

Name of the Agency

1 Have the tenderer visited the site

2 Manpower Deployment: Proposed by Tenderer for Deployment for completion of work.

c Fitter / Bar bending

f Semi Skilled Carpenters

g Semi Skilled Fitters

j Mechanical Operators

3 Technical Staff Deployment:

a Graduate Engineers

b Diploma Engineers

d Quality Control Engineer

4 Machinery Deployment: Nos

a Concrete Manufacturing Plant

b Concrete Mixers

c Dewatering pumps

e Hoist / Tower Crane

f JCB / Poclain

g Compression Testing Machine

h Concrete Workability Test Equipment

i Formwork Materials

j Trucks / Dumpers.

k Scaffolding Materials

l Transit Mixers

n Mechanical Rammer

o Welding Machines

p Gas Cutting Sets

q Survey Instruments

s Material Testing Lab. Equipments

t Road rollers (for road work)

Any Other Machinery / Equipement proposed by Tenderer required for specialised works Nos

Note : 1) It is noted that the above deployment is minimum. After detailed programming and actual condition at site, additional deployment shall be done as necessary for completion of the work within the stipulated time period.

2) It is mandatory to fill up ANNEXURE - A by the tenderer. Non-compliance of the same, tender may be rejected.

Government Of India

Bhabha Atomic Research Centre

Engineering Services Group

Civil Engineering Division

North Site, Trombay, Mumbai – 400 085.

NAME OF WORK : Composite work of refurbishment of B-Block lecture hall related to Civil, Electrical, HVAC and other allied works at ground floor, Mod Labs, North Site, BARC, Trombay, Mumbai- 400085

NIT No. : BARC/CED/ET/89/2025-2026 DATE 13/02/2026 Name of Agency

DETAILS OF ALL WORKS OF SIMILAR CLASS COMPLETED DURING THE LAST SEVEN YEARS

Sl. No. Name of work/ project and location Owner or sponsoring organisation Cost of work in Lakhs Rupees Date of commencement as per contract Stipulated date of completion Actual date of completion Litigation / arbitration cases pending / in progress with details (indicate gross amount claimed and amount awarded by the Arbitrator) Name and address/ telephone number of officer to whom reference may be made Remarks

Government Of India

Bhabha Atomic Research Centre

Engineering Services Group

Civil Engineering Division

North Site, Trombay, Mumbai – 400 085.

NAME OF WORK : Composite work of refurbishment of B-Block lecture hall related to Civil, Electrical, HVAC and other allied works at ground floor, Mod Labs, North Site, BARC, Trombay, Mumbai- 400085

NIT No. : BARC/CED/ET/89/2025-2026 DATE 13/02/2026 Name of Agency

PROJECTS UNDER EXECUTION OR AWARDED

Sl. No. Name of work/ project and location Owner or sponsoring organisation Cost of work in Lakhs Rupees Date of commencement as per contract Stipulated date of completion Up to date percentage progress of work Slow progress if any and reasons thereof Name and address / telephone number of officer to whom reference may be made Remarks

Select, Premium (+), Rebate (-) Less (-)

Tender Inviting Authority: Government of India, Bhabha Atomic Research Centre, Civil Engineering Division, North Site, Trombay, Mumbai – 400 085

Name of Work: Composite work of refurbishment of B-Block lecture hall related to Civil, Electrical, HVAC and other allied works at ground floor, Mod Labs, North Site, BARC, Trombay, Mumbai- 400085

NIT No. : BARC/CED/ET/89/2025-2026 DATE 13/02/2026

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Item Description Item Code / Make Quantity Units Estimated Rate in Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Figures To be entered by the Bidder in Rs. P (Excluding GST) Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category

1 Civil works. Dismantling plain cement concrete manually / by mechanical means carefully without damaging adjacent structures including disposal of debris within 200 m lead as per direction of Engineer-in-charge. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) CuM Excess(+) Full Conversion INR

2 Demolishing C.C / R.C.C works by mechanical means and stock piling at designated locations carefully with out damaging adjacent structures and disposal of dismantled materials up to a lead of 100 m, stacking serviceable and unserviceable materials separately including cutting reinforcement bars all as directed at site. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) CuM Excess(+) Full Conversion INR

3 Dismantling brick work in Cement mortar carefully without damaging adjacent structures including stacking of materials and dispoal of unserviceable materials within 100 m lead as per direction of Engineer-in-charge. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) CuM Excess(+) Full Conversion INR

4 Dismantling doors, windows and clear storey openings (steel / wood) shutter including chowkhats, architraves, holdfasts etc. complete and stacking within 100 m lead (full windows) of area 3.00 Sq.M and below. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) Nos Excess(+) Full Conversion INR

5 Dismantling cement asbestos, Celotax ,wooden or other hard board ceiling or partiton walls/paneling including stacking of serviceable materials and disposal of unserviceable materilas within 100 m lead. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) SqM Excess(+) Full Conversion INR

6 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 100 m lead.For thickness of tiles above 10 mm and up to 25 mm. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) SqM Excess(+) Full Conversion INR

7 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 100 m lead For thickness of tiles above 25 mm and up to 40 mm. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) SqM Excess(+) Full Conversion INR

8 Dismantling old plaster / skirting carefully , raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 100 m lead. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) SqM Excess(+) Full Conversion INR

9 Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismantling and stacking within 100 m lead. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) MT Excess(+) Full Conversion INR

10 Lead charges for lead Exceeding 2 KM but not exceeding 3 KM, by mechanical transport including loading, unloading, stacking / levelling etc. Debris Beyond 2 Km but up to and including 3 km. Note: The rates in respect of Item Nos 10 is applicable for NET Quantities arrived at after making deduction for voids @ 30% from corresponding TRUCK Measurement. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) CuM Excess(+) Full Conversion INR

11 Providing and laying in position cement concrete of 1:2:4 (1 cement, 2 crushed sand, 4 graded stone aggregate of nominal size 20 mm) including consolidation, finishing, curing etc. complete as per specification and drawings but excluding the cost of Formwork shuttering, centering and steel reinforcement at all Levels. Note: Minimum Cement Content to be as per the latest revision of the relevant IS Codes. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) CuM Excess(+) Full Conversion INR

12 Providing and laying in position Reinforced Cement Concrete (RCC) of grade M-30 using 20mm maximum size aggregates and crushed sand of approved quality including admixtures of approved brand and quality (plasticiser or super plasticiser) if required, including weigh batching, mechanical mixing, transporting, placing, vibrating, consolidation, finishing, curing etc. complete but excluding the cost of centering, shuttering and reinforcement complete as per specifications & at all level. Note: Minimum Cement Content to be as per the latest revision of the relevant IS Codes. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) CuM Excess(+) Full Conversion INR

13 Providing REINFORCEMENT FOR REINFORCED CEMENT CONCRETE at all levels including supplying, preparation of bar bending schedules,cutting, bending, transporting, fixing, tieing in position with 1.6 mm dia soft drawn annealed binding wire all labour charges, cost of cover blocks in specified grade of concrete etc. complete including cost of binding wire as per specifications and drawings. Steel Supplied by the Contractor. Using TMT bars of specified grade all dia bars to be supplied by the contractor manufactured confirming to IS:1786. Note: 1. Structural steel confirming to IS 2062 and shall be approved by the Project Engineer, relevant Test cerificate to be produced before procurement. 2. The contractor shall supply documentary evidence of purchase of steel, Test certificate from approved manufacturers and also third party testing from approved laboratories with out any extra cost. 3. Welding weights, connections, bolts and nuts shall not be measured for payment but the cost of which shall be deemed to have been included in the rates. 4. Welding Electrodes manufactured by specified suitable grade only shall be used. 5. Holes to be drilled only by Drilling machines and gas cutting of holes are not permitted. 6. Rate inclusive of all consumables like GAS, welding electrodes and tools and tackles etc. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) MT Excess(+) Full Conversion INR

14 Providing Structural steel work using angles, channels, joists and other sections, welded and / or bolted in built up sections for trusses , structural steel floors, frame works, monorails and other structures including supplying, cutting, welding, fabricating, hoisting, fixing in position, applying a priming coat of approved steel primer etc. complete all as per specifications, drawings and as directed by the Engineer in charge. Up to and including 300 mm Joists, 350 mm channels, and below sections using materials of approved manufacturers. All test reports to be provided along with the supply of the materials. Note: 1. Structural steel confirming to IS 2062 and shall be approved by the Project Engineer, relevant Test cerificate to be produced before procurement. 2. The contractor shall supply documentary evidence of purchase of steel, Test certificate from approved manufacturers and also third party testing from approved laboratories with out any extra cost. 3. Welding weights, connections, bolts and nuts shall not be measured for payment but the cost of which shall be deemed to have been included in the rates. 4. Welding Electrodes manufactured by specified suitable grade only shall be used. 5. Holes to be drilled only by Drilling machines and gas cutting of holes are not permitted. 6. Rate inclusive of all consumables like GAS, welding electrodes and tools and tackles etc. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) MT Excess(+) Full Conversion INR

15 Providing Structural steel work in M.S Plain Plates and chequrred Plates for Embedded Parts, Trench Covers, Connection plates etc.including cutting, hoisting, fixing in position and applying a priming coat of approved zinc chromate steel primer etc.including cost of structural steel Plates, welding all labour charges etc. complete as per drawings and specifications. All test reports to be provided along with the supply of the materials . 1. Structural steel confirming to IS 2062 shall be supplied.2.Product to be got approved by the Project Engineer before procurement and relevant Test cerificate to be produced.3. The contractor shall supply documentary evidence of purchase of steel, Test certificate from approved manufacturers and also third party testing from approved laboratories with out any extra cost.4. Welding weights, connections, bolts and nuts shall not be measured for payment but the cost of which shall be deemed to have been included in the rates. 5. Welding Electrodes of specified and suitable grade only shall be used 6. Holes to be drilled only by Drilling machines and gas cutting of holes are not permitted . 7. Rate inclusive of all consumables like GAS, welding electrodes and tools and tackles etc. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) MT Excess(+) Full Conversion INR

16 Providing, centering, shuttering Form work using steel plates, timber planks for all types of structures including necessary strutting, proping, staging, supports, bracings etc. and deshuttering the same after the specified time all as per drawings, specifications and as directed by the Engineer-in-charge at all levels- For super structure. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) SqM Excess(+) Full Conversion INR

17 Providing and fixing hand rail using 304 grade Stainless Steel pipes of approved size and make and quality by welding, mirror / matt polishing, fixing at site etc. for balcony railing & staircases railing including special sections as per drawings, specifications. complete as directed by the Engineer-in-charge. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) Kg Excess(+) Full Conversion INR

18 Providing and constructing Brickwork in cement mortar 1:4 using crushed sand with Flyash/ Flyash Lime bricks with minimum 70 kg/ sq.cm strength of approved make and size in super structure up to and including Floor II Level including, scaffolding, raking out joints, curing, cleaning complete all as per specifications and drawings. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) CuM Excess(+) Full Conversion INR

19 Providing and constructing Half brick masonry using Flyash/ Flyash Lime bricks with minimum 70 kg / Sq.cm strength of approved make and size in partition walls in C.M 1:4 (using crushed sand) including scaffolding, raking out joints, curing etc. complete and with stiffners of RCC 1:2:4 (105 X 75 mm size) at every 900 mm height including form work curing etc. complete as per specifications but excluding reinforcement in Super Structure up to Floor - II level. (Reinforcement will be paid under relevant item of this schedule). _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) SqM Excess(+) Full Conversion INR

20 Providing and Laying Autoclaved Aerated cement block masonry of approved make with specified thick AAC Blocks in Super structure above plinth level up to 20 m height in cement mortar 1:4 (using crushed sand). The rate shall also include providing and placing in position 2 nos of 8 mm dia bars at every third course of the masonry work. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) CuM Excess(+) Full Conversion INR

21 Providing 15 mm thick plastering using Ready mix internal plastering compound of approved make for internal faces of brickwork / concrete surfaces including preparation of the surface, curing, cleaning, scaffolding complete all as per specifications and as directed at site by the Engineer-in-charge _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) SqM Excess(+) Full Conversion INR

22 Providing 20 mm thick plastering using Ready mix plastering compound of approved make for external faces of brickwork / concrete surfaces including preparation of the surface, curing, cleaning scaffolding up to 10 metres height complete.all as per specifications including forming drip moulds wherever necessary and as directed by the Engineer-in-charge _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) SqM Excess(+) Full Conversion INR

23 Structural repairs works with pre-packed dual shrinkage controlled (volume stable in wet & hardened state), single-component ready-to-use, structural grade high build, alkali-resistant, fibrereinforced, thixotropic polymer modified repair mortar having excellent bond strength to old damaged concrete structures / surfaces by the following process: 1) Removal of loose/spalled or damaged concrete by chipping and cleaning the concrete surface to open up to 20mm behind the reinforcement steel with wire brush and with clean water including removal of dirt, paint, wax, oil, grease, laitance, foreign substances, etc.Mechanically profile and prepare concrete surfaces by abrasive blasting, waterjetting or other engineer approved methods 2) Cleaning the rebars with Acetone for complete rust removal and washing with water to make the surface clean. Ensure that the concrete substrate and ambient temperatures are between (10°C and 35°C) before application 3) Applying protective coat / bond coat using Styrene Butadiene Rubber (SBR) polymer and cement in the proportion of 1: 1 (1 part of polymer : 1 parts of cement). 4) Mixing full 25 Kg bag with clean potable water in water to product ratio of 0.12 to 0.18), mixed by heavy-duty slow speed (300 to 600 rpm) drill with spiral mixing paddle or forced action pan mixer pan for 3 minutes to achieve uniform lump free mortar consistency. 5) Applying polymer modified mortar with trowel & float. The polymer modified mortar shall have the following properties/technical parameters:(A) Properties / technical parameters of pre-packed Polymer Modified Mortar:i) Compressive strength 1 day: Min. 20 MPa (as per BS:6319 : Part 2) ii) Compressive strength 7 days: Min. 35 MPa (as per BS:6319 : Part 2) iii) Compressive strength 28 days: Min. 45 MPa (as per BS:6319 : Part 2) iv) Flexural strength in 28 days: Min. 7 Mpa (as per BS:6319 : Part 3) v) Tensile strength in 28 days: Min. 2.5 MPa (as per BS:6319 : Part 7) vi) Bond strength: Min. 5 MPa (as per ASTM : C881) vii) Water permeability: less than 1% (as per ASTM : C881) viii) Drying shrinkage in 28 days: less than 1000 microstrain (as per ASTM C 157-93) ix) Potential Alkali Reactivity - : <0.1% Expansion % ( ASTM C1260)(B) Properties / technical parameters of SBR polymer bond coat material: "i) Meets the requirements of BS 6319 part 2:1983 & ASTM C 190-85 standards ii) Total solids % by mass at 105oC: 38 + 1 iii) pH value: 7.5 to 9.5iv) Specific gravity at 27.5oC: 1 to 1.05 v) Coverage: 4.2 - 4.5 sq.m/kg per coat" Notes:- (a)Placing and finishing the same with trowel / hand packing carefully compacting the same around the rebars and finishing to bring it in line with existing concrete surface on the beams, slabs, columns, etc. (b) If thickness of repair exceeds 20mm , after every 20 mm thick repair, bond coat as per process no. (3) mentioned above in the BOQ item, to be applied and further thickness of repair to be continued for each layer. (c) The surface preparation & method of application shall be as per manufacturer's technical data sheet. (d) The double tubular steel scaffolding will be paid separately in relevant item. (e) Sampling and testing of cube specimen for compressive strength test shall be as per BS 6319 - Part-2.Other tests mentioned above shall be carried out if required as per the direction of the EIC and the cost of which shall be deemed to be included in the quoted rate (f) For each batch of mortar mixed, following records, i.e Quantity of mortar (kg) mixed, Amount of water added to the mix, Location of application and the area covered.(g) Payment will be paid on the basis of actual consumption of PMM & Reinforcement will be paid in the relevant item.(h) Curing like mist spraying the surface with water or using damp burlap or hessian cloth shall be done. Replacement of old rebars in case of reduction in diamter shall be done in consultation with EIC before applying repair mortar (i) Safety Precuations:- Use wear tight-fitting, dust-resistant, chemical splash goggles and dust respirator, if airborne dust is generated, wear protective rubber hand gloves, wear appropriate clothing to prevent any possibility of skin contact. The above item of work is inclusive of all materials, labour, machinery, tools & tackels, consumables, trasportation, loading & unloading, safety PPEs etc. all complete as directed by Engineer-in-charge at site using approved pre-packed polymer modified mortar suitable for structural repair works. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) Kg Excess(+) Full Conversion INR

24 Providing SFMC Micro concrete for strengthening of structural members including mixing, pouring, curing as per manufacturer specifications and as directed by the Engineer-in-charge . Using 100% SFMC _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) Kg Excess(+) Full Conversion INR

25 Core cutting in RCC beyond 100 mm up to and including 150 mm Dia _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) M Excess(+) Full Conversion INR

26 Providing and applying cold liquid Polyurethane waterproofing system on Horizontal surfaces including coving (if any) having following layers:(a) Primer / base coat: Providing and applying (Pre-Measured Packed) silver grey coloured 2 (two) component solvent free, odourless, Epoxy-basedPrimer with excellent adhesive property on the clean and grinded surface/substrate. The substrate can be slightly moist (in concrete, the moisture must be less than 20 %), sound and free from any material that would hinder good adhesion. Mix component 'A' into component 'B' in ratio of 1: 0.16 by weight thoroughly with a clean stirring stick. The mixture should be of uniform colour & free from streaks and be applied evenly with roller. The primer should be completely dry for further application of liquid applied polyurethane based membrane/ coating. The consumption, depending on the nature and condition of the substrate for priming, should be within the range of 250 – 400 gm/sq.m. The rate shall including cost of all material, labour, tools & plants, consumables etc. complete all as directed by EIC. (b) Top coat: Providing and applying cold liquid applied waterproofing based on highly flexible solvent free single component Polyurethane system and special needle punched non woven, system compatible polyester fleece of minimum 120 GSM as reinforcement. The cold liquid applied reinforced system shall have high crack bridging property and shall be UV stable, solvent-free, Cool Roof system. Application procedure: (i) Stir the material well before use. (ii) 2/3rd of the waterproofing mix material to be applied on the primed substrate and the special polyester fleece of min. 120 gsm to be rolled with roller including removal of air bubbles with an overlap of min. 5 cm. (iii) The remaining 1/3rd of the waterproofing material to be poured onto the surface until complete saturation is achieved. The layers should be applied on wet surface of earlier coat and there should not be any time lag during the laying of the system. (iv) After curing, one coat of material approx. 300g/sq.m. to be applied after 24 hours. (v) The total system of waterproofing for material and components shall be procured from single manufacturer. (vi) The total thickness achieved from the application should be from 1.4 to 1.7 mm. (vii) The total consumption of mix waterproofing depending on the nature, porosity and condition of the substrate should be in the range of 2.3 to 2.7 kg/sq.m. The rate shall including cost of all material, labour, tools & plants, consumables etc. complete all as directed by EIC. Specifications/Technical Parameters: The tensile strength of the membrane shall be min. 8.60 N/sq.mm and Elongation at break with fleece shall be min. 83.0 % (with fleece). The Tear Resistance of the membrane shall be min. 41.0 N/mm, Solar Reflection Index (SRI) Value of membrane shall be min. 100, Degree of solar reflectance of the membrane shall be min. 85% and adhesive strength shall be min. 2.40 N/sq.mm. etc. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) SqM Excess(+) Full Conversion INR

27 Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces, chajjas etc. consisting of flowing operations (i) Injecting the top slab as required with cement and approved water proof compound solution to fill up all inherent holes, voids honey combs etc.in the concrete slab, setting "autoclaved aerated light weight block bats" coba in waterproof mortar with necessary gradient for easy flow of water & continue the treatment along the inner faces of parapet or other adjoining wall upto a height of 300 mm in the shape of vatas, finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (using river / crushed sand) admixed with proprietary water proofing compound conforming to IS 2645 and approved by Engineer-in-charge including mixing polyester fibre of approved make' at the rate of 125 grams per 50 kg of cement in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300 X 300 mm square, 3 mm deep (v) The whole terrace so finished shall be flooded with water for a minimum period of 2 weeks for curing and for final test. All above operations to be done in order and as directed and as specified by the Engineer-in-charge (120 mm Average thickness for terraces using river sand ) _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) SqM Excess(+) Full Conversion INR

28 Extra over 120 mm thick for providing cement based waterproofing treatment to new terraces / chajjas including cleaning the concrete surfaces, giving injections to the top slab as required with cement & approved waterproofing compound solution to fill up all inherent holes, voids honey-combs etc. in the concrete slab, setting "autoclaved aerated light weight block bats" coba in waterproof mortar 1:4 (using crushed sand) with necessary gradient for easy flow of water, complete as per specifications and as directed by the Engineer-in-charge. (Measurement will be over and above the average thickness of 120 mm only) _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) CuM Excess(+) Full Conversion INR

29 Providing and laying minimum 25 mm thick uniform shade Kotah stone flooring & skirting over 20 mm thick (Avearge) base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing in minimum three levels to obtain mirror polish complete with base cement mortar 1:4 (using crushed sand) all as per specifications, patterns and drawings complete. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) SqM Excess(+) Full Conversion INR

30 Providing and fixing Glazed VITRIFIED floor tiles of approved make in different sizes conforming to IS 15622 in all colours and shades in Glossy or Matt or satin finish laid over a bed of minimum 20 mm thick bed of cement mortar 1:4 (using Crushed sand) and jointing with grey cement slurry including grouting with the joints with white cement based Tile Grout of approved make and matching shade complete as per patterns, drawings and specifications complete as directed by the Engineer-in-charge. Using Tiles of size 600 X 600 mm _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) SqM Excess(+) Full Conversion INR

31 Providing and Laying non toxic, solvent free ,epoxy resin for waterproofing potable/general water retaing structures and surfaces, toilets etc. in two coats ( overcoating time 24hrs ) to achive minimum total protective thickness of 200microns ( theoretical consumption 0.1ltr per Sqm per coat) including preparation of surface to receive the treatment, spreading quatz sand after first coat and curing to obtain full watertightness of the surfaces. Complete as per the manufacture's specification and as directed by the Engineer -in-charge. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) SqM Excess(+) Full Conversion INR

32 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS 15622 of approved make. shade and colour of size ranging from 300 - 600 mm long and 300 mm - 600 mm wide and thickness not less than 6 mm as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (using crushed sand), setting the tiles in cement slurry and pointing the joints with matching colour Tile grout of approved make of matching shade including using PVC tile trim in the exposed corners, complete as per drawings, patterns and specifications complete as directed by the Engineer-in-charge. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) SqM Excess(+) Full Conversion INR

33 Providing and fixing 1st quality ceramic glazed floor tiles of minimum 300 - 600 mm long and 300 - 600 mm wide and thickness not less than 6 mm conforming to IS 15622 of approved make in all colours and shades as approved by Engineer-in-charge over a bed of 20 mm thick bed of cement mortar 1:4 (using crushed sand) and jointing with grey cement slurry including pointing with white cement based Tile grout of approved make and matching shade complete as per patterns, drawings and specifications complete as directed by the Enginner-in-charge _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) SqM Excess(+) Full Conversion INR

34 Providing, supplying and laying pre polished granite slab flooring / dado / Wall cladding with 15 - 17 mm thick granite slabs over 20 mm thick base cement mortar 1:4 (using crushed sand) laid and placed with grey cement slurry including filling the joints with matching white cement based tile grout complete all as per specifications and drawings.-Using approved shade other than black _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) SqM Excess(+) Full Conversion INR

35 Extra for providing edge moulding to 15 to 17 mm thick marble stone / Granite Slab counters, Vanitis etc. including machine polishing to edge to give high gloss finish et. Complete as per design approved by Engineer-in-charge.-For Granite work _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) M Excess(+) Full Conversion INR

36 Providing and laying granite Inlay of approved Pattern made out of 19 mm thk machine cut & machine polished 1st quality Granite slab of approved make, color & shade. Granite shall be free from any color variation and deformities. The granite shall be fixed on floor, before fixing the surface shall be properly hacked, scrapped, surface preparation shall be done with 1:1 cement slurry paste of min 12 mm thk shall be placed and on the top granite with proper edge moulding , water jet/laser jet cutting, bedding / lipping, shall be placed, Proper curing, joints filling, etc. all will be complete as per directions of Project Engineer. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) SqM Excess(+) Full Conversion INR

37 Providing and fixing second class TEAK wood skirting upto 50 mm high, bands etc. on partitions, walls and other similar locations, including necessary B.W.P. ply backing, nails, screws, melamine polishing in approved colour etc. raised from FFL as per dwg. complete as per detailed drawings. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) Rmt Excess(+) Full Conversion INR

38 Providing and fixing Aluminium skirting 50 mm high on partitions and walls. The rate to be inclusive of all accessories, such as anchor fasteners etc. complete. as per the approval of Project Engineer. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) Rmt Excess(+) Full Conversion INR

39 Supplying and injecting with approved quality chemical emulsion at the rates and concentrations as per IS 6313-2001 Part II for post Anti-termite treatment to existing buildings as per manufacturers specifications and as directed by the Engineer-in-Charge. Work to be executed by approved agency and specified guarantee for 7 (Seven) years shall be furnished by the tenderer. Payment will be cleared only after submission of guarantee. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) SqM Excess(+) Full Conversion INR

40 Providing and fixing anodized aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereever required including cleat angle, aluminium snap beading for glazing / panelling, C.P brass / stainless screws all complete as per drawings and and directions of Engineer-in-charge including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required filling the gaps using silicon grout sealent etc. (fittings glazing and panelling shall be paid for separately) _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) Kg Excess(+) Full Conversion INR

41 Extra over for colour anodizing as directed by the Architect/Project Engineer. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) Kg Excess(+) Full Conversion INR

42 Extra over for wooden txture/finish coating etc., as directed by the Architect/Project Engineer _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) SqM Excess(+) Full Conversion INR

43 Designing, providing and fixing of 4 mm thick approved make and shade Aluminium Composite Metal Panel of approved make cladding at different locations including soffits of over-hangs but excluding aluminium frame work with grids filled in with weather silicon sealant as per the drawings. The ACM panel composition shall be of 0.5 mm thick PVDF coated aluminium sheet + 3 mm thick low density polyethelene virgin resin core + 0.5 mm thick polyester (PVDF) coated Aluminium sheet all complete as per approved shop drawings and specification (Aluminium frame work will be paid under reelevant item) Note : ACMP shall be measured to the actual visible area of the ACP sheet including silicon joints as fixed on site. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) SqM Excess(+) Full Conversion INR

44 Providing and fixing glazing in aluminium doors, window, ventilator shutters and partitions etc with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-charge (Cost of snap beading shall be paid in basic item) With clear float glass panes of 6.00 mm thickness _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) SqM Excess(+) Full Conversion INR

45 Providing and fixing in position suspended false ceiling system using 12 mm thick calcium silicate boards 100% humidity resistance, incombustible as per BS476 part IV with thermal conductivity of 0.043 w/m KC placed in a suspended grid of size of 600x 600mm made of hot-dipped G.I steel sections wherein the ceiling sections of 0.55 mm thick shall be suspended at 1200 mm centres along the length of ceiling with 4mm dia G.I wires/ 1 mm thick strip hangers made of G.I sheet sections with necessary level adjusters and inter channels of 0.90mm thick with connecting clips and resting on the periphery walls on wall angles of 0.55 mm thickness including providing necessary openings for light fixtures, diffusers, trap doors etc to be made as per layout drawings and as per directions of Engineer-in-charge.The main tees to be suspended from the ceiling/ soffit with the help of metal dash fastners of 6mmx50mm, soffit clits of 25mmx35mmx1.60mm and 4mm dia G.I wire with galvanised spring steel levelling clips/ G.I strip Hangers at 600mm centers . the entire grid system shall be designed to bear a distributed load of minimum 25 kg/Sq.m (Only calcium silicate false ceiling area will be measured for the purpose of payment) Note:The rate shall include providing necessary openings for light fixtures, diffusers, trap doors etc to be made as per layout drawings. The work shall be carried out as per directions of Engineer-in-charge. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) SqM Excess(+) Full Conversion INR

46 Providing & Fixing of Perforated Calcium Silicate Acoustical Suspended Ceiling System, 08mm thick with (600x600mm) Tiles. Noise Reduction Coefficient (NRC) ranging from 0.70 to 0.85, with rockwool 50mm thick, 48 kg density, for enhancing the NRC value.The exposed grid ceiling comprises a pre-coated steel angle of size 24×24mm, fixed to the brick wall partition at the perimeter of the ceiling by nylon sleeves and wood screws at 450 mm centers. A cross "T" of size 24×38×600mm, with interlocking notches at both ends, is inserted and fixed into the center notch of the above cross "T" to form a grid of size 600×600mm. Boards, cut to size 595×595mm, are then laid onto the grid accordingly.The system complies with EN 13501-1 standards (Class A1) for fire performance, with a Flame Spread Index (FSI) of 0 and a Smoke Developed Index (SDI) of 5, meeting ASTM E84 standards.The rate is to include all profiles and cut-outs required for light fixtures, speakers, smoke detectors, trap doors, and AC grills in the ceiling, all complete as per the manufacturer's specifications. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) SqM Excess(+) Full Conversion INR

47 Providing wood work in frames of doors, windows, clear story openings and other frames, wrought framed and fixed in position of required size and shape including sawing, jointing,making rebates for shutters, making grooves as shown in the drawings, finishing the surfaces to the required finish all as per specifications and drawings including necessary MS hold fasts 40 mm X 3 mm thick, 200 mm long / with coach screws including protective painting to the suface that will come in contact with walls, joining materials, labour etc. complete all as per specifications and as directed by the Engineer-in-charge. Second class teak wood (Timber to be got approved by the Project Engineer before manufacturing) _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) CuM Excess(+) Full Conversion INR

48 Providing and fixing FRP door shutters flush door / panelled type with plain colour or wooden veneer finish of approved make, design & colour. made out of 1.5 mm thick FRP skin moulded over wooden frame work of 40 mm wide and required thickness wooden styles and minimum 100 mm wide lock rails and wooden blocks for door stoppers, tower bolts, baby latch, aldrop, handles etc. wherever required and core filled with Polyurethane Foam and fixing with 4 Nos 100 mm (ISI marked) stainless steel hinges with S.S. wood screws .35 mm thick panelled door type of approved colours including the cost of 100 mm ISI marked heavy quality stainless steel butt hinges with necessary screws. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) SqM Excess(+) Full Conversion INR

49 Providing and fixing 35 mm thick flush door shutters conforming to IS : 2202 non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with internal teak wood lipping 25mm wide and fixing with 4 Nos of 125 mm long Stainless steel Hinges with S.S. wood screws complete. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) SqM Excess(+) Full Conversion INR

50 Extra over for providing and fixing flush doors with decorative veneering on both sides _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) SqM Excess(+) Full Conversion INR

51 Extra over for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of shutters (over all area of door shutter to be measured) Commercial flush door shutters _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) SqM Excess(+) Full Conversion INR

52 Providing and fixing brass mortise latch and lock of approved make with 6 levers and a pair of lever Brass handles with necessary screws etc complete suitable for fixing in wooden / steel/ FRP/ doors as per specifications. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) Nos Excess(+) Full Conversion INR

53 Providing and fixing approved make 7 Lever Night latch including necessary screws etc in wooden doors complete all as directed at site. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) Nos Excess(+) Full Conversion INR

54 Providing and fixing stainless steel tower bolts of size 300 X 12 mm of approved make with necessary screws etc. all as per specifications and as per drawings. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) Each Excess(+) Full Conversion INR

55 Providing and fixing IS: 3564 marked aluminium die cast body tubular type universal hydraulic door closer of approved make with necessary accessories and screws etc. in wooden doors / steel doors with necessary bolts & nuts complete as per specifications and as directed by the Engineer-in-charge. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) Each Excess(+) Full Conversion INR

56 Providing and fixing aluminium handles 175 mm long Inner grip 125 mm with 12 mm dia rod plate type BOW handles ISI marked of approved make, anodised transparent or dyed to req. colour or shade with necessary screws etc. complete. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) Each Excess(+) Full Conversion INR

57 Providing and applying two coats of Anti-carbonaton paint of approved colour and shade of approved manufacturers on concrete surfaces (ceilings, beams, columns etc.) _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) SqM Excess(+) Full Conversion INR

58 Providing, applying wall painting two coats with Lustur paint of approved brand to give an even shade over a coat of cement primer including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) SqM Excess(+) Full Conversion INR

59 Providing Melamine polishing on wood work (one coat) as per manufacturers instructions, matt or glossy finish as specified including preparation of the surfaces, complete. as per specifications and as directed by the Engineer-in-charge _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) SqM Excess(+) Full Conversion INR

60 Providing and painting with PU paint or polish on wood/metal/plastic surface as per manufacturer's instructions with thickness of 1mm achieved in two or three coats, matte or glossy finish including preparation of surface by removing all contaminants, sanding if necessary and making it even, for better adhesion & ensure thorough stirring to get consistent texture, evenly applied and properly cured complete as per specifications and as directed by the Engineer-in-charge. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) SqM Excess(+) Full Conversion INR

61 Providing and applying white cement based wall putty of approved make over concrete or Plastered surface up to 3 mm thick to get uniform surface free from undulation including cleaning complete all as directed by the Engineer-in-charge .Note: Scaffolding will be paid separately under relevant item. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) SqM Excess(+) Full Conversion INR

62 Providing and fixing double tubular scaffolding system using H- frames with cup lock type on the exterior side upto seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre horizontal and vertical tubes joining with cup and lock system with M.S. tubes, M.S. tube challies, M.S clamps and M.S staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and as approved by the Engineer -in - charge. The elevational area of the scaffolding shall be measured for payment purposes. The payment shall be made once irrespective of duration of scaffolding. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) SqM Excess(+) Full Conversion INR

63 Providing & Fixing 19mm thick marine ply confirming to IS :710 - 2010 over existing framework fixed with screws, hardwares, adhesive etc. at minimum spacing of 600mm vertically & horizontally finished with minimum jointing groves visible. complete as per detail specification & approved drawing including labours, tools, tackels in all respects and as directed by the Project Engineer. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) SqM Excess(+) Full Conversion INR

64 Providing & fixing 12mm thick cement bonded board made up of 62% cement, 28% wood and 10% water & chemicals confirming to IS 14276- 2016. This board to be fixed over existing Aluminium / GI framework fixed with Screws of 25mm with 12nos per Sqm, at minimum spacing of 600mm vertically & horizontally finished with minimum jointing groves visible. complete as per detail specifications, approved drawings including labours, tools, tackels in all respects and as directed by the Project Engineer. The detailed specification is mentioned below; i) Density :- 1250 +- 10% Kg/cum ii) Moisture content 9% +- 3% iii) Bending strength :- 9 N/mm2 iv) Compressive strength :- 15 N / mm2 v) Nail holding power :- 205 kg vi) Screw holding power :- 312 kg. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) SqM Excess(+) Full Conversion INR

65 Providing and fixing acoustic insulation treatment to the dry wall in premises using high performance accoustic sheets of 4mm thick high density mass loaded sound barrier sheet ,along with other accessories and fixtures etc., all complete as per the manufacturer's specification, the laying of the acoustic treatment shall be done by the authorized applicator of the manufacturer of acoustic sheets: Area thickness tolerance of less than 10% and length and width tolerances of less than 5%. It boasts a nominal mass over 7.2kg/m2 and a density greater than 1800 Kg/m³. It meets Euroclass B s1 d0 fire standards and provides significant sound and insulation improvements. Environmentally, it contains 15% recycled raw material, with 60% post-consumer content, and emits 50 µg/m³ VOCs. Front elevation, one side only no wastage to be added ( no overlaps to be provided ). Complete as per detail specification & approved drawing including labours, tools, tackels in all respects and as directed by the Project Engineer. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) SqM Excess(+) Full Conversion INR

66 Providing & Fixing 6mm thick marine ply in position on frame work including all materials,labour etc complete including labours, tools, tackels in all respects as per specification and as directed by the Project Engineer. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) SqM Excess(+) Full Conversion INR

67 Providing & Fixing 4mm thick wooden series and dark series Veneer of approved shade, pattern, color cladded over existing ply panelling with necessary & approved hardware & adhesive as per requirement in line level, free from buldge , matching grove and patterns complete as per detail Specification & Approved drawing etc.,complete including labours, tools, tackels in all respects and as directed by the Project Engineer. Veneer shall be finished with LOW VOC melamine polish. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) SqM Excess(+) Full Conversion INR

68 Providing & fixing stretch fabric gripper system, UPVC grippers,standard,cove mono,edge, but as required by design & manufacture's specifications.Core - fire retardant compressible polyster padding Of 25 mm thk frame : Gripper fix On 75 X 12Mm Ply (Fire Retardant) patty with 25 mm thk polyster padding as required by design.Installation:Installation in accordance with drawings and manufacturer's instruction. Installation of grippers in maximum length possible, from end to end butt joints with hairline not be visible in finished work. Install grippers so that joints between core material & grippers are not visible in finished work, rebate edge of rigid core material for flush fit.Install fabric without wrinkles or folds, maintaining horizontal/vertical alignment of warp/woof of fabric, force fabric edges into clamping jaws, using tools and techniques that will not damage finish of the fabric complete to the satisfaction of Project Engineer. Submittals : Shop drawings indicating location, size, type,including frame, core & fabric of nextgen / innovative make finish Components, for each panel In project. drgs indicating construction details of interface with adjacent construction. The rates shall Includes the shapes, pattern as mentioned In the drawing indicating graphics If any. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) SqM Excess(+) Full Conversion INR

69 Providing and fixing 6 mm thick commercial ply backing of size 600 mm X 600 mm on modular false ceiling tiles to support light fitting, speakers, CCTV cameras, diffuser of grid work size with necessary cut outs for the same etc.Complete including labours, tools, tackels in all respects and as directed by the Project Engineer. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) Nos Excess(+) Full Conversion INR

70 Providing and fixing Aniodized Aluminium L corner profile in bronze/titanium Carpet steps etc Complete including labours, tools, tackels in all respects and as directed by the Project Engineer. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) M Excess(+) Full Conversion INR

71 Providing , fabricating and fixing DB storage unit of 600 mm deep made out of 25 mm thick block board ,Openable shutters made out of 25 mm thick blockboard mounted on butterfly soft close hinges. All internal surfaces to be finished in 0.8 mm thick laminate and external surfaces to be finished in 4mm thick Veneer finisehd with melamine Polish, units to have 18 mm thick. MDF board adjustable shelves at 375 mm c/c. Back of storage unit to be out of 6 mm thick commercial ply . The cost to be also inclusive of 150 mm high SS concealed handles, locks with key holes, etc complete including labours, tools, tackels in all respects and as directed by the Project Engineer. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) SqM Excess(+) Full Conversion INR

72 Providing , fabricating and fixing accosutical wooden Door 45 STC Size -1050 mm x 2400 mm. Frame: Acoustical Door Frame Providing/ Fixing 200 mm X 100 mm, 100 X 37.5 mm Thk Teak Wood Door Frame With Double Rebate As Per Detail Drawing Including Ms Hold Fast In Plumbline And One Coat Of Black Japan Paint & Anti Termite Treatment On Frame As Per Drw & Instruction Of Acoustic Consultant / Project Engineer & Architect and testedas per IS: 9901-1981(part III). Doors: Providing & Making Of The 125 mm Thk Acoustical Door In Hard Wood Frame Of 75 X 37.5 mm All Around Both Side And Intermediate Frame Of 50 X37.5 mm @ 600 Mmc/C In Both Direction Keep 50 mm Thk 1000 Gsm Density Micron In Between Frame Bothside With 5 Mm Thk 10 Kg/M2 Tec Sound & One Layer Of 12.5 mm Thk Plain Gypsum Inbetween The Frame.Door Shall Be Finished With 12 mm Thk Com. Ply Both Side With 1.5 mm Thk Laminate As Per Architect Design Drawing & Pattern.All The Edges Of The Door Shall Be Finished With T.W Lapping Putty As Per Detail. Door Shall Have A Drop Down D-Seal Dp160-drop Seal Profile and "O" Seal Rubber Lining On Three Side Of The Frame Rebate As Per Design, Drawings Instruction Of Acoustic Consultant / Site Engineer & Architect. Accessories :Hinges - 150 X 50 X 6mm Stainless Steel Hinges 4 No'S Per Shutter.Door Closer Concealed Heavy-Duty Door Closer,1 number Per Shutter,Hold Open Type Door Closer,Handle Shall Be Fabricated As Per Design, 1No'S Per Shutter, Stainless Steel (304 Grade)Hairline Finish,40mm Diameter, 750mm Long On pull Side Of Both Side Doors. 2 Set Per Door, etc. complete including labours, tools, tackels in all respects and as directed by the Project Engineer. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) Nos Excess(+) Full Conversion INR

73 Providing, fabrication & fixing Accosutical wooden Door 45 STC Size- (900 mm L X 2400 mm) Frame: Acoustical Door Frame Providing/ Fixing 200 mm X 100 mm, 100 X 37.5 mm Thk Teak Wood Door Frame With Double Rebate As Per Detail Drawing Including Ms Hold Fast In Plumbline And One Coat Of Black Japan Paint & Anti Termite Treatment On Frame As Per Drw & Instruction Of Architect or Project Engineer. Doors: Providing & Making Of The 125 mm Thk Acoustical Door In Hard Wood Frame Of 75 X 37.5 mm All Around Both Side and Intermediate Frame Of 50 X37.5 mm @ 600 Mmc/C In Both Direction Keep 50 mm Thk 1000 Gsm Density Micron In Between Frame Bothside With 5 Mm Thk 10 Kg/M2 Tec Sound & One Layer Of 12.5 mm Thk Plain Gypsum Inbetween The Frame.Door Shall Be Finished With 12 mm Thk Com. Ply Both Side With 1.5 mm Thk Laminate As Per Architect Design Drawing & Pattern.All The Edges Of The Door Shall Be Finished With T.W Lapping Putty As Per Detail. Door Shall Have A Drop Down D-Seal Dp160-Athmer Seal Profile And "O" Seal Rubber Lining On Three Side Of The Frame Rebate As Per Design, Drawings Instruction Of Acoustic Consultant / Site Engineer & Architect. Accessories :Hinges - 150 X 50 X 6mm Stainless Steel Hinges 4No'S Per Shutter.Door Closer ,Concealed Heavy-Duty Door Closer,one number Per Shutter.,Hold Open Type Door Closer, Handle Shall be Fabricated As Per Design, 1No'S Per Shutter, Stainless Steel (304 Grade)Hairline Finish,40mm Diameter, 750mm Long On pull Side Of Both Side Doors, 2 nos. Per Door total including labours, tools, tackels in all respects and as directed by the Project Engineer. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) Nos Excess(+) Full Conversion INR

74 Providing , fabrication & fixing Double leaf 120 minutes fire rated fire door of size 2500mm x 1200mm. The Frame : GI 1.20 mm ,Shutter : GI 0.80 mm Frame Profile (D X H): 100mm x 57mm Frame rebate single. Door type : Single leaf / Double leaf door with folding mechanism in equal part ( 4 folding panel of 625 mm folding internally) .Infill Material : Honey Comb Vision Panel Active (VPW X VPH): 200 mmX300 mm .Vision Panel Glazing type : Single Vision Panel Type in shutters. Glazing Kit Hinges:- 3No Ball bearing butt hinge, SS304, of size 100 x 75 x 3mm with SS screws Lock:- Mortise dead lock, inc strike H4, 55mm BS, 20mm sq.for end SSS finish - Euro profile 5 pin cylinder 5702, 70mm Key x Key, NP finish.Handle:- Pull handle D type PD10,19 dia, CTC 250mm, back to back, with extended spindle, SS 304, SSS finish - Rose & escutcheon for 19mm dia handles - Door closer - CE Fire Rated Surface door closer, HDC003 with standard arm, Silver finish - Bolt:- Flush Bolt Concealed size 300mm/600mm, SSS - Gasket:- Fire rated 4mm thk x 13mm, Black Clear fire rated glass:- 6mm, 120min, of size 200 x 300mm. Cost shall be inclusive of providing master key & grand master key etc. complete including labour, tools, tackels in all respects and as directed by the Project Engineer. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) Nos Excess(+) Full Conversion INR

75 Providing and Fixing Trap door made of 19mm thk marine ply with 1.0mm thk laminate on both sides with 50 mm X 35 mm thk ply frame work @ c/c distance of 450 mm or as per site conditions, with required hardware fitting and Allen key locking arrangement, etc. complete including labours, tools, tackels in all respects and as directed by the Project Engineer. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) SqM Excess(+) Full Conversion INR

76 Providing & Fixing Gypsum Ceiling which includes G.I Perimeter Channel is fixed along the perimeter of existing wall/ partition at 600mm centre. G.I Ceiling Angle is suspended at up to 1.5m height by fixing it to the soffit clit with Soffit Cleat and or Rawl Plug- 8x45mm creating 1220mm x 1220mm grid. G.I Intermediate channel is fixed to the G.I Ceiling Angle with M6 x 12mm Hex Bolt & Hex Nut arrangement or with 2 Nos of 4.2x13 metal to metal screw .The G.I. Ceiling Section is then fixed to the G.I. Intermediate Channel with the help of Connecting Clip and in direction perpendicular to the Intermediate channel at 457mm c/c. Single layer of 12.5mm thick Plain Gypsum board is then screw fixed to ceiling section with 25mm drywall screws at 230mm centres. Finally square and tapered edges of the boards are to be jointed and finished so as to have a flush look which includes filling and finishing with Jointing Compound & Joint Paper tape. Serrated steel section has effective thickness of 2T (2xdepth), better load carrying capacity, enhanced screw retention, Improved acoustic performance & fire resistance as compared to plain steel section. Cost should be inclusive of necessary cutouts for light fixtures, speakers, sprinklers, any other services etc. The rate shall also include providing perimeter channel for grills, lights, diffusers as called for in HVAC and Electrical Drawings. The rate shall also include providing for edge/angle bits at all corners, necessary taping, filling with jointing compound as per manufacturers specifications etc. complete including labours, tools, tackels in all respects and as directed by the Project Engineer. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) SqM Excess(+) Full Conversion INR

77 Providing and Fixing cove ceiling made out of 150mm width 12mm thick plyboard finished in approved 4 mm thick Veneer as per detail drawing and direction of the architects. With provision and cutouts for fixing light fittings, cable, conduits etc running internally, AC grill fixing etc. 100mm front facia and 200mm back facia. Veneer shall be fixed with LOW VOC melamine polish, etc. complete including labours, tools, tackels in all respects and as directed by the Project Engineer. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) Rmt Excess(+) Full Conversion INR

78 Providing and fixing 150mm Veneer ceiling band made out of 12mm thk marine ply frame work cladded with 4mm thick Wooden series Veneer in approved make / shade / figures with groves & direction as per detailed drawings. Veneer to be finished with Low VOC Melamine Polish. All above ceiling surfaces should be painted with Black japan. The ceiling shall be suspended from trues lab with necessary supports. Cost should be inclusive of cutouts for lights, grills, any MEP services etc. complete including labours, tools, tackels in all respects and as directed by the Project Engineer.. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) Rmt Excess(+) Full Conversion INR

79 Supply, installation of Acoustic insulation with 25mm thick self extinguishing high performance acoustic insulation open cell processed elastomeric foam with anti bacterial coating - Class 1 fixed with adhesive ( ducting) lined internally as recommended by manufacturer (Density 160 Kg/m3). The rate must be included with Perforated Aluminium Sheet ( 18 gauge ). (AHU room wall ) The cost inclusive of materials, labour, tools & tackles and consumables all complete and as directed by the Project Engineer. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) SqM Excess(+) Full Conversion INR

80 Providing and fixing acoustic Infill - 50mm thick rock wool insulation of 48kg/m3 density or 50mm thick 1000 GSM polyester wool insulation as an acoustic requirement. The work affix of 50mm thick of acoustic infill insulation of density 48 kg/m3 or 1000 GSM of approved make wrapped in RP tissues suitably affixed to partition framework using necessary Holding Clips, GI binding wire, duct tape, etc.The cost shall be inclusive of materials, labour, tools & tackles and consumables all complete as directed by Project Engineer. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) SqM Excess(+) Full Conversion INR

81 Providing and fixing Mural of approved design theme of five elements of nature like Air/water/fire/earth/sky made using Glass Mosaic Tiles of 20mm x 20mm of approved make & size and shade and shape of first quality including cutting to any shape and set in minimum 12 mm thk cement and sand mortar of 1:3 backing pointing,laid to proper line and level flush with filling the joints with white cement mixed with matching colour pigment complete as directed by the consultant Cost should be inclusive of 3mm thk spacer epoxy grout. Edges / Corners to be finished with Aluminum corner profile , etc. The cost shall be inclusive of materials, labour, tools & tackles and consumables all complete as directed by Project Engineer. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) SqM Excess(+) Full Conversion INR

82 Providing, supplying and installation of Nylon Roll Form Carpet in the specified areas as per patterns and specifications as below. Construction - Tufted Level Loop Fiber Type - Nylon 6 Dye Method - 100% Solution Dyed Gauge - 1/12 or 1/10 Backing Material - PVC free 100% Recyclable backing Indoor Air Quality - Green Label Plus Prices shall be inclusive of transportation, shop drawings preparation (if reqd) /getting approval from Architects/Mockups/Handing over documents that inclusive of as build drg, warranty& Guarantee certificate, user manuals, products catalogues, contact details etc.Carpet pattern / Colour / Shade to be strictly as per Project Architect approval. Installation of carpet with approved Pressure Sensitive Adhesive / Water Based / Solvent-Free / Low Odor / (less than 0.25 Grams / litre VOC). Note- Cost to include complete installation, cleaning and 2 Layer of Plastic bubble sheet upto handover. Cost to include One time Carpet Shampooing .The contractor shall ensure that the floor surfaces are acceptable and that any issues related to the same are indicated to the architects at the initial stages itself. Type of adhesive, strength & stickness factor shall be as per manufactures specifications. Average Density - 7500 oz/yd3 to 9500oz/yd3 Underlay - Cushion backing fibre base underlay / 4mm thk form underlay Backing Material - Mesh backing Size -W 3600mm, etc. complete including labours, tools, tackels in all respects and as directed by the Project Engineer. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) SqM Excess(+) Full Conversion INR

83 Providing and applying one coat of exterior primer( resistant to bacteria suprior hiding powder fast drying eco friendly), two coats of acrylic based textured plaster of stone Finish Texture by making Brick size Groove Pattern and finish as with average thickness of 2.50 mm to 3.00 mm and finished with 2 coats of high performance coating of approved shade including preparation of surfaces, masking tape for preparation of groove etc. complete , as per specifications and as directed by the Engineer-in-charge. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) SqM Excess(+) Full Conversion INR

84 Providing, applying and finishing walls with two coats of premium fine textured exerior paint of required shade over new work including base coat of water proof cement paint, preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge On Plain plastered / concrete sufaces. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) SqM Excess(+) Full Conversion INR

85 Providing and fixing WATER PROOF MARINE PLY of any approved brand as per IS 710: 2010. The rates are including the cost of screws, washers etc complete providing and fixing hard wood leaping around board in walls etc. Excess(+) Full Conversion INR

85.1 By using 12 mm thick water proof marine ply. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) SqM Excess(+) Full Conversion INR

85.2 By using 19 mm thick water proof marine ply. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) SqM Excess(+) Full Conversion INR

86 CARRYING OUT MANUAL MISC. CARPENTRY / PLUMBING / CIVIL / MASONRY JOBS like minor repairs, fixing fitting and fixtures etc. as and when required and as directed by the Engineer-in-charge Note: 1. Labours shall bring necessary carpentary / plumbing tools, minimum materials such as washher, taflon tape, rawlpludge, screws, clips etc. 2) Payment shall be made as per the Log book duly approved by the Enginner in charge. 3) Contrator shall arrange necessary Police Verification Certificate for the workers engaged for thess work. 4) The contractor shall deploy one skilled, semiskilled or unskilled person for each job for 8 1/2 hours per day with 30 minutes of break, in General (Ist / IInd) or on Round the clock shift whenever necessary as per the discretion of the Engineer-in-Charge during the contract period. Excess(+) Full Conversion INR

86.1 SKILLED CARPENTERY/PLUMBING/MASONRY JOB / WORKS with valid Police Verification Certificate for entire contract period. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) Mandays Excess(+) Full Conversion INR

86.2 SEMI-SKILLED CARPENTERY/PLUMBING/MASONRY JOB / WORKS with valid Police Verification Certificate for entire contract period. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) Mandays Excess(+) Full Conversion INR

86.3 UNSKILLED CARPENTERY/PLUMBING/MASONRY JOB / WORKS with valid Police Verification Certificate for entire contract period. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) Mandays Excess(+) Full Conversion INR

87 Cleaning from Professional Agency Cleaning of the entire premises from the agency after the completion of site before the handover as directed by the project Engineer. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) SqM Excess(+) Full Conversion INR

88 Acoustical Testing of auditorium using Certified Acoustical lab to check the room to be achieved as RT-60 value along with certification as directed by the Project Engineer. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) SqM Excess(+) Full Conversion INR

89 Providing and fixing Stud Anchor Stainless Steel SS 317 including drilling in concrete as per requirement for fixing Eps or other structures all as specified by the manufacturer complete all as per specifications and drawings and as directed by EIC confirming to IS 1946 or IS 5624. Excess(+) Full Conversion INR

89.1 M-10X100 mm long. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) Nos Excess(+) Full Conversion INR

89.2 M 8 X 75mm long _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) Nos Excess(+) Full Conversion INR

90 Providing and painting TWO coats of synthetic enamel paint on new wooden surfaces of approved brand and manufacturer of required colour to give an even shade over an under coat of suitable shade primer of approved brand and manufacturer including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) SqM Excess(+) Full Conversion INR

91 Supply, Installation, Testing & Commissioning GI Pipe,Class-C (as per IS 1239) of size 65 mm NB complete with 38mm thick class O, closed rubber cell insulation with 24G aluminum Cladding as per the Clause No:01 - Technical Specification of HVAC. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) Rmt Excess(+) Full Conversion INR

92 Supply Installation testing and Commissioning of Recirculatory type Double skin AHU of 20 TR Capacity, 8000 CFM as per the clause No. 02 - Technical Specification of HVAC. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) Nos Excess(+) Full Conversion INR

93 Supply, Installation, Testing & Commissioning of Flanged Type 65 n.b. Gun metal Gate valve along with necessary accessories, fittings & insulation as per the Clause No:03. - Technical Specification of HVAC. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) Nos Excess(+) Full Conversion INR

94 Supply, Installation, Testing & Commissioning of Flanged type 65NB PIBCV (pressure independent balancing control valve) along with Actuator & necessary accessories, fittings & insulation as per the Clause No.04 - Technical Specification of HVAC. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) Nos Excess(+) Full Conversion INR

95 Supply, Installation, Testing & Commissioning of Bourdon Tube SS Pressure gauges with SS Ball Valves and Siphon tube and with pressure indication from 0-10 Kg/cm2 as per the Clause No:05 - Technical Specification of HVAC. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) Nos Excess(+) Full Conversion INR

96 Supply, Installation, Testing & Commissioning of Flanged type following type Gun metal Globe valve with insulation as per Clause No:06 - Technical Specification of HVAC. Excess(+) Full Conversion INR

96.1 25NB Flange Type Gun metal globe valve _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) Nos Excess(+) Full Conversion INR

96.2 65 NB Flange Type Gun metal globe valve _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) Nos Excess(+) Full Conversion INR

97 Supply, Installation, Testing & Commissioning of 65NB GI/HDG, basket filter with SS screen mesh & insulation as per the Clause No:07 - Technical Specification of HVAC. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) Nos Excess(+) Full Conversion INR

98 Supply, Installation, Testing & Commissioning of Thermostat with Temperature Controller & Temperature Transmitter for PIBCV as per the Clause No:08 - Technical Specification of HVAC. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) Nos Excess(+) Full Conversion INR

99 Supply, fabrication, installation and painting of MS structural material such as I-beams, channels, angles, sections, chequred plates, gratings etc. required for supports, platforms, EPs etc. as per site requirement as per clause no. 9 - Technical Specification of HVAC. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) Kg Excess(+) Full Conversion INR

100 Supply, Installation, testing & Commissioning of Dial Type Temperature Gauges with indication from 0°C-50°C and with each division of 0.5°C as per the Clause No:10 - Technical Specification of HVAC. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) Nos Excess(+) Full Conversion INR

101 Supply, Installation , testing and commisioning of GI Ducting of following thickness per clause No.11 - Technical Specification of HVAC. Excess(+) Full Conversion INR

101.1 18G with both 25 mm acoustic insulation on inner surface & 25mm closed rubber cell Insulation and 24G Aluminium Cladding on outer surface _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) SqM Excess(+) Full Conversion INR

101.2 20G with both 25 mm acoustic insulation on inner surface & 25mm closed rubber cell Insulation and 24G Aluminium Cladding on outer surface _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) SqM Excess(+) Full Conversion INR

102 Fabrication,Supply, Installation Testing and Commissioning of air flow control dampers as per Clause no. 12 - Technical Specification of HVAC. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) SqM Excess(+) Full Conversion INR

103 Supply, Installation , testing and commisioning of Diffusers with GI multi-louvered volume control dampers as per the Clause no. 13 - Technical Specification of HVAC. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) SqM Excess(+) Full Conversion INR

104 Supply, Installation , testing and commisioning of powder coated return grills as per the clause no. 14 - Technical Specification of HVAC. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) SqM Excess(+) Full Conversion INR

105 Fabrication,Supply, Installation Testing and Commissioning of fire dampers with fusible plug as per Clause no. 15 - Technical Specification of HVAC. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) SqM Excess(+) Full Conversion INR

106 Supply, Installation , testing and commisioning of thermal insulation of Class - O, 32 mm thick, closed cell, nitril rubber as per Clause No. 16 - Technical Specification of HVAC. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) SqM Excess(+) Full Conversion INR

107 Safe removal of existing Ducting with grilles, dampers, diffusers, Insulation etc. and shifting it to Dumping Yard per clause no. 17 - Technical Specification of HVAC. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) SqM Excess(+) Full Conversion INR

108 Safe Removal of Existing AHU and shifting it to dumping Yard as per the clause No.18 - Technical Specification of HVAC. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) Nos Excess(+) Full Conversion INR

109 Safe Removal of existing Piping with insulation and shift to dumping Yard as per clause no.19 - Technical Specification of HVAC. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) M Excess(+) Full Conversion INR

110 Supply & Installation of 50 mm depth, 3ply HDPE washable Air Prefilters of AHU as per clause no.20 - Technical Specification of HVAC. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) SqM Excess(+) Full Conversion INR

111 Supply, installation, testing and commissioning of LED lighting fixtures. Excess(+) Full Conversion INR

111.1 36 W, 4000Lumen LED 600x600mm LED lighting fixtures as per clause no. 1 & 1.1 of technical specifications. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) Nos Excess(+) Full Conversion INR

111.2 20W, 2200Lumen Round Recess type LED lighting fixture as per clause no. 1 & 1.2 of technical specifications. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) Nos Excess(+) Full Conversion INR

111.3 18W, 2200Lumen, 1200mm, LED Profile Vertical Linear Lights as per clause no. 1 & 1.3 of technical specifications. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) Nos Excess(+) Full Conversion INR

111.4 LED Cove lights, 3700 K, with all required fitting accessories as per clause no. 1 & 1.4 of technical specifications. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) M Excess(+) Full Conversion INR

111.5 18W LED Track light 3700K with all required accessories as per clause no. 1 & 1.5 of technical specifications. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) Nos Excess(+) Full Conversion INR

111.6 34W Weather proof LED light fixture, 6500k as per clause no. 1 & 1.6 of technical specifications. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) Nos Excess(+) Full Conversion INR

112 Supply, installation, testing and commissioning of Lighting management and automation system compatible with dimming, variable CCT, and Day light Effect with its metal powder coated enclosures : Supply, installation, testing and commissioning of lighting management and automation system including all its accessories/components i.e DALI Gateway, IP GATEWAY, Switching/ Blind Actuator-12 Channel, Dimming and CCT controller, Automation Distribution Box, RTI PROCESSOR XP3, Integrated Central Processor 3 IR Port , One RS232 Port , 2 Relays & 2 Sence Port and IP Control With Unlimited User License, Power Supply module 640mAfor Automation System, 4 nos. Multi Touch Buttons, Minimu 9" Touch pad compatible with Lighting management and automation system as per clause no. 117 of technical specifications. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) SET Excess(+) Full Conversion INR

113 Supply, installation, testing and commissioning of Cables, Earthing conductor and cable termination Excess(+) Full Conversion INR

113.1 4C 6 sq.mm Cu. XLPE FRLS armoured cable as per clause no. 3 & 3.1 of technical specifications. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) M Excess(+) Full Conversion INR

113.2 10C 1.5 sq.mm Cu. XLPE FRLS armoured cable as per clause no. 3 & 3.2 of technical specifications. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) M Excess(+) Full Conversion INR

113.3 End termination upto dia. 15-25mm armoured cable as per clause no. 3 & 3 of technical specifications. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) Nos Excess(+) Full Conversion INR

113.4 12 SWG bare cu. Conductor as per clause no. 3 & 3.4 of technical specifications. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) M Excess(+) Full Conversion INR

113.5 25x3mm cu. Earth strip as per clause no. 3 & 3.5 of technical specifications. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) M Excess(+) Full Conversion INR

114 Supply, installation, testing and commissioning of Motor starter and push button station. Excess(+) Full Conversion INR

114.1 VFD with bypass DOL Motor starter Panel for 7.5 HP motor as per clause no. 4 & 4.1 of technical specifications. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) Nos Excess(+) Full Conversion INR

114.2 24V AC/DC SMPS unit as per clause no. 4 & 4.2 of technical specifications. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) Nos Excess(+) Full Conversion INR

114.3 Remote push button station with indications as per clause no. 4 & 4.3 of technical specifications. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) Nos Excess(+) Full Conversion INR

115 Supply, installation, testing and commissioning of switch boards. Excess(+) Full Conversion INR

115.1 12 module switch board with 03 no. 10A SP switch and Socket each and 01 no. 16A switch and socket each as per clause no. 5 & 5.1 of technical specifications. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) Nos Excess(+) Full Conversion INR

115.2 06 module switch board with 01 no. 10A SP switch and Socket each and 01 no. 16A switch with indicator and socket each as per clause no. 5 & 5.2 of technical specifications. . _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) Nos Excess(+) Full Conversion INR

115.3 03 module switch board with 01 no. 10A SP switch and socket as per clause no. 5 & 5.3 of technical specifications. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) Nos Excess(+) Full Conversion INR

116 Supply, installation, testing and commissioning of Power Point Wiring Excess(+) Full Conversion INR

116.1 3 nos, 2.5 sq. mm FRLS wire with length of 1-5 Mtr. as per clause no. 6 & 6.1 of technical specifications. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) Each Excess(+) Full Conversion INR

116.2 3 nos, 2.5 sq. mm FRLS wire with length of 6-10 Mtr. as per clause no. 6 & 6.2 of technical specifications. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) Each Excess(+) Full Conversion INR

116.3 3 nos, 2.5 sq. mm FRLS wire with length of 15-20 Mtr. as per clause no. 6 & 6.3 of technical specifications. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) Each Excess(+) Full Conversion INR

116.4 3 nos, 1.5 sq. mm FRLS wire with length of upto 5 Mtr. as per clause no. 6 & 6.4 of technical specifications. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) Each Excess(+) Full Conversion INR

116.5 3 nos, 1.5 sq. mm FRLS wire with length of 5.1-10 Mtr. as per clause no. 6 & 6.5 of technical specifications. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) Each Excess(+) Full Conversion INR

116.6 3 nos, 1.5 sq. mm FRLS wire with length of 10.1-15 Mtr. as per clause no. 6 & 6.6 of technical specifications. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) Each Excess(+) Full Conversion INR

116.7 3 nos, 1.5 sq. mm FRLS wire with length of 15.1-20 Mtr. as per clause no. 6 & 6.7 of technical specifications. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) Each Excess(+) Full Conversion INR

117 Supply, installation, testing and commissioning of DBs and Sign boards Excess(+) Full Conversion INR

117.1 Supply & Installation of 8 way PPI DB with both side cable boxes as per clause no. 7 &7.1 of technical specifications. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) Nos Excess(+) Full Conversion INR

117.2 Photoluminescence LED Exit sign Boards as per clause no. 7 & 7.2 of technical specifications. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) Nos Excess(+) Full Conversion INR

118 Supply, installation, testing and commissioning of LAN Points Excess(+) Full Conversion INR

118.1 Information Outlet, 3nos, RJ45, I/O, with plate and metal back box points as per clause no. 8 & 8.1 of technical specifications _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) Nos Excess(+) Full Conversion INR

118.2 LAN Cat-6A cabling with casing capping/conduit as per clause no. 8 & 8.2 of technical specifications _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) M Excess(+) Full Conversion INR

118.3 Communication (KNX) cable along with conduit/casing capping from controller to lighting fixture as per clause no. 8 & 8.3 of technical specifications _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) M Excess(+) Full Conversion INR

118.4 Managed 24 port Non PoE Layer-2 Gigabit Ethernet Access Switch as per clause no. 8 & 8.4 of technical specifications. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) Nos Excess(+) Full Conversion INR

118.5 24 Port Category-6A unshielded Patch Panel as per clause no. 8 & 8.5 of technical specifications. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) Nos Excess(+) Full Conversion INR

118.6 Cat-6A patch cord of length 1m as per clause no. 8 & 8.6 of technical specifications. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) Nos Excess(+) Full Conversion INR

118.7 Cat-6A patch cord of length 2m as per clause no. 8 & 8.7 of technical specifications. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) Nos Excess(+) Full Conversion INR

118.8 Cat-6A patch cord of length 3m as per clause no. 8 & 8.8 of technical specifications. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) Nos Excess(+) Full Conversion INR

119 Supply and installation of GI Floor floor trunking with cover Excess(+) Full Conversion INR

119.1 50x100 GI Floor floor trunking with cover, thickness-1.6mm as per clause no. 9 & 9.1of technical specifications. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) M Excess(+) Full Conversion INR

119.2 50x200 GI Floor floor trunking with cover, thickness-1.6mm as per clause no. 9 & 9.2 of technical specifications. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) M Excess(+) Full Conversion INR

120 Removal and reinstallation of Fire alarm detectors along with cabling as per clause no. 10 of technical specifications. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) Nos Excess(+) Full Conversion INR

121 Removal of old unused cables, conduits, casing cappings from wall/ceiling/beam/trench etc. as per clause no. 11 of technical specifications. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) M Excess(+) Full Conversion INR

122 Removal of old unused switch boards, ICTPN, Lighting fixtures, DB etc. from wall/ceiling/beam/trench etc. as per clause no. 12 of technical specifications. _(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_) Each Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures Select

Please Enable Macros to View BoQ information