Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹11.8 LAccepted-AOC NOT FOUND | 1 | Accepted-AOC L1 | |
| 2 | 2₹12.0 L+₹26,844 (2.28%)Rejected-AOC 4 BY 8 BLOCK H NEAR VIJAY CHOWK EAST DELHI DELHI 110051 | EAST DELHI | DELHI | 110051 | 2 | Rejected-AOC L2 | |
| 3 | 3₹13.7 L+₹1.9 L (16.0%)Rejected-AOC GALI BAWARI WALI NOHARIA BAZAAR SIRSA 125055 HARYANA | SIRSA | HARYANA | 125055 | 3 | Rejected-AOC L3 | |
| 4 | 4₹13.9 L+₹2.2 L (18.3%)Rejected-AOC | 4 | Rejected-AOC L4 | |
| 5 | 5₹14.7 L+₹2.9 L (24.5%)Rejected-AOC | 5 | Rejected-AOC L5 |
Tender Value
Refer Docs
EMD Value
₹46,000
Closing Date
26 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) SIRSA
GE (AF) SIRSA
PROVISION OF WORKS SERVICES FOR LIVING IN ACCN AT AF STN SIRSA
2022_MES_533789_1
GE/SRA/T-10 OF 2022-2023
Open Tender
Miscellaneous Works
Item Rate
273 days
GE (AF) SIRSA
As per NIT and Tender
3 documents required · 3 mandatory
₹500
GE (AF) SIRSA
₹46,000
Yes
15 Sept 2022
27 Jun 2022
28 Jul 2022
27 Jun 2022
26 Jul 2022
9 Jul 2022
27 Jun 2022 - 6 Jul 2022
60 days
Amount
M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exceeding 20cm girth, complete all as specified and as directed.
M&L Brick Work with half brick walls Sub-Class ‘B’ Bricks (Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:4, complete all as specified and as directed.
M&L for Cutting Holes in Brick Walls, exc. Half Brick thick but not exc. One Brick thick, built in Cement Mortar for inserting Angle for cloth wire, Lugs and Making Good to dismantled portion with Cement Concrete 1:2:4 (20mm graded crushed stone aggregate) or Cement Mortar 1:3 (as required) and adjoining Surfaces in Cement Mortar 1:4, complete all as specified and as directed.
Providing precast cement concrete Type B-1, 1:2:4 (20.0mm graded crushed stone aggregate) Set in CM (1:4) as in Shelves and Similar Items including Form work (as required) and smooth finishing at both side using extra Cement, complete all as specified and as directed.
M&L for TMT Bars 8.0mm dia, cut to length bent to shape required including cranking, bending spirally for hoping for Columns, hooking Ends and binding with and including Mild Steel Wire (annealed) not less than 0.9mm dia or securing with Clips, complete all as specified and as directed.
Taking down cement or cement lime plaster,any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, complete all as specified and as directed.
M&L for Rendering (Internal) 10mm thick in Cement Mortar 1:6 on Brick Walls or on Concrete Surfaces, Plastered Surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed.
M&L built in steel cup board with pressed steel frame of size 75x45x1.25 mm thick with pressed steel shutter 1.00 mm godrej pattern fixed to masonry wall by hold fast made out of 25x3 mm thick flat iron incl MS hanging rod of 10mm dia with bracket fixed on inner side of cup board shutter and on other leaf provision of MS peg set of 03 ,locking arrangement including spray painting with two coats of synthetic enamel paint over one coat of red oxide primer all around steel surfaces of frame and shutter and making good disturbed portion in CM(1:3) or PCC 1:2:4, complete all as specified and as directed.
M&L for Non-skid Coloured Ceramic joint free tiles 400x400x 7 to 8 mm thick (Square/rectangular) area of each tile exceedig 0.11 Sqm but not exceeding 0.18 Sqm in Flooring, set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, laid over and including Screed or Screed Bed 15mm thick in Cement Mortar 1:6, complete all as specified and as directed.NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate.
M&L preparing new Plastered surfaces of Walls and concrete surface (RCC Shelves) by applying 1.5 mm thickWall Care Putty including Rubbing down with Sand Paper to obtain a Smooth Finish Surface and applying Two Coats of Distemper Oil Emulsion (as approved) over a Coat of Primer, complete all as specified and as directed.
M&L Cement Concrete 1:2:4 (20mm graded crushed stone aggregate) of 50mm in Floor, etc. finishing the Concrete Surfaces Even and Smooth without using ExtraCement,complete all as specified and as directed.
M&L for Coloured Glazed Ceramic Tiles 400x400x7.0 to 8.0 mm thick in Vertical Surface i.e. Dado, Skirting,etc., set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, laid over and including 10mm thick rendering in Cement Mortar 1:4, complete all as specified and as directed.NOTE : Cost of Cement rendering shall deem to be include in the Quoted Unit Rate.
M&L preparing old Plastered surfaces of Walls by brooming downor steel wire brushing and scraping down and filling the existing Nails/Screw holes, etc. applying Two Coats of Distemper Oil Emulsion (as approved), complete all as specified and as directed.
S&F Galvanised mild steel Plain wire dia 4.0 mm , galvanised class 3,for hanging cloth and mosquito nets straining and fixing to steel Angle to straining bolts,hooks ,eyes including securing with and provision of galvanised iron tying wire, galvanised iron staples or steel pins, etc. as directed (each line of wire to be measured) , complete all as specified and as directed.
Demolition/Dismantling of tiles of any description or thickness in floors including Laid ,Cement Mortar Bedding (but not backing) and removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed.
S&F angle 40x40x4 or tee sections Confirming to Fe-415 for cloth hanging wire and mosquito nets as cutting into ordinary length including drilling holes into Angle and fixed independently without connecting plates, etc. complete all as specified and as directed.
M&L Cutting out bricks,forming toothing for, and bonding new into old work including value of new materials entering old walls and jointing and pointing in cement mortar 1:4 and making Good (measured on vertical face in contact with old wall) , complete all as specified and as directed.
AGGARWAL CONSTRUCTION CO.
YESH BUILDERS
M/s Har Nandi Construction Company
VIVEK CONSTRUCTION CO
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .