Loading
Loading…
Loading…
Tender ID
Tender Value
₹14.3 L
EMD Value
₹28,700
Closing Date
21 Jan 2026, 11:00 amClosed
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
MALDA DIV
56 conditions · 11 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Scanned copy -in PDF format- of the details regarding the Association of Railway Officers with the tenderer -for details please refer ANNEXURE-U-V of Coml Compliance.
Scanned copy -in PDF format- of the details of the works the tenderer presently in hand during the last three years -for details please refer ANNEXURE-IV Coml Compliance.
Scanned copy -in PDF format- of the details of the List of the Arbitration cases of the tenderer during last 5 years -for details please refer ANNEXURE-U-VI of Coml Compliance.
Scanned copy -in PDF format- of the details of the List of the Court cases of the tenderer during last 5 years -for details please refer ANNEXURE-U-VII of Coml Compliance.
Scanned copy of the NEFT in PDF format as per Annexure - U-VIII of of Coml Compliance.
In case (i) the office is closed due to any reason or (ii) any one of opening official is on leave or out from Head Quarter, on the stipulated date & time of opening of the tender, whatsoever the tender will be Opened on the next working day on which both opening officials are present at Head Quarter.
The Railway reserves the right to verify all statements, information and documents submitted by the bidder in his tender offer, and the bidder shall, when so required by the Railway, make available all such information, evidence and documents as may be necessary for such verification. Any such verification or lack of such verification,by the railway shall not relieve the bidder of its obligations or liabilities hereunder nor will it affect any rights of the railway thereunder.
In case of any wrong information submitted by tenderer, the contract shall be terminated, Earnest Money Deposit (EMD), Performance Guarantee (PG) and Security Deposit (SD) of contract forfeited and agency barred for doing business on entire Indian Railways for 5 (five) years.
Each page of the copy of documents/certificates in support of credentials, submitted by the tenderer, shall be self-attested/digitally signed by the tenderer or authorized representative of the tendering firm. Self-attestation shall include signature, stamp and date (on each page).
S&T work in connection with "Detection of non-interlocked Siding Points at BARHARWA"
MLDT_SNT_25-26_37_OTR3~ER
MLDT_SNT_25-26_37_OTR3
Open
Works - General
6 Months
Maldah, West Bengal
₹0
₹28,700
21 Jan 2026
30 Dec 2025
7 Jan 2026
32 items across 7 schedules · ₹14,33,389.13 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Supply of Electric Point Machine-IRS type, (AC Immunity 160V AC), Non-Trailable to operate on 110V DC complete with Lock and Detector slides, Cable Termination Box (143mm throw, thrust as applicable, Rotary locking), confirming to IRS: S 24/2002 (amdt.1) (Amdt. up to date if any) & Assy. Drg. No. RDSO-S/10910 (alt. up to date if any) & IRS: S 37/82 (amdt.3) (Amdt. up to date if any) for Motor. | Numbers | 1.00 | 65,619 | 65,619 |
| 2 | Supply of Ground Connection [BG] Threaded Type for IRS type Point Machine, as per CWM/Signal Workshop/Howrah/E.Rly drawing number, Sl.No., Description of Drawing & CWM/SW/HWH s Drawing No. mentioned below :- 1. Detector Rod (Far End) - BS/29/721 with ALT-1 Detector Rod (Near End)- BS/29/722 with ALT-1. 2. Lock Rod (Far End) - BS/29/723 with ALT-1, Lock Rod (Near End) - BS/29/724 with ALT-1. 3. Switch Extension Bracket - BS/29/725 with ALT-1. 4. Drive Rod - BS/29/726 with ALT-1 Drive Lug- BS/29/726 A with ALT- 1. 5. Sleeve- BS/29/726 B with ALT-1. 6. Lug- BS/29/726 C with ALT-1. 7. Pin- BS/29/726 D with ALT-1. 8. Sketch showing the Layout arrangement- BS/29/727 with ALT-1. Amdt. and alt. upto date if any. Turn Out | Numbers | 1.00 | 6,716 | 6,716 |
| 3 | Installation of electric point machines on MS plate fixed on wooden/ concrete sleepers complete with fixing of junction boxes, ground connections including smithy works involved, insulation of MS plate on which the point machine is to be fixed from the gauge tie plate involving riveting/welding of angle cleats, installation of point JB, termination adjustment for operation of points by crank handle, painting and lettering as required including wiring, testing and commissioning.Note: MS plate/flat/angle /angle cleats, paints, bolts & nuts and washers of sizes as required for fixing the point machine shall be supplied by the contractor except point machine. | Numbers | 1.00 | 10,407 | 10,407 |
| 4 | "Supply of Point JB fitted with 18 nos. 1-way terminal block confirming to IRS-S-75/91 (AMD-2) OR LATEST, DRG. NO. SA- 23741A with 3 no. of 40 mm bore G I PIPE 600 mm long as per DRG. NO. SGW/MGS/ PT4/91 fixed on hylum sheet with U channel (75x40x1500) mm for fixing ARA terminal to be procured from RDSO approved sources. " | Numbers | 1.00 | 4,140 | 4,140 |
| 5 | "Supply of uncharged Low Maintenance Lead Acid (LMLA) secondary cell, shelf mounting type conforming to RDSO Specn.No.IRS:S-88/2004 or latest with inter cell connectors, nuts and bolts etc. 2V, 200AH " | Numbers | 15.00 | 5,445 | 81,675 |
| 6 | Charging of lead acid cell (Secondary cell) of various capacities as per Manufacturer's/Railway engineer's instruction. Acid and distilled water to be supplied by the contractor. Specific gravity acid should be approved type. This includes installation and commissioning of battery in circuit. Battery to be kept on wooden rack. 2V 200AH | Numbers | 15.00 | 761 | 11,415 |
| 7 | Supply of Self-Regulating Type Battery Charger, 230V AC/24V DC, 30 Amps as per RDSO Specn.No.IRS:S86/2000 (Amnd.4) or latest. | Numbers | 1.00 | 39,429 | 39,429 |
| 8 | "Supply of Q-Series Line Relay (QNA1 Type), AC immunized, 8F/8B, 24 V DC along with plug board (base plate), connectors, retaining clips etc. and conforming to BRS-931A and RDSO Specn.No.IRS:S@45"44@ S-23 and S-60 or latest. The interlocking code for this unit shall be ""ABDGH"". " | Numbers | 5.00 | 3,845 | 19,225 |
| 9 | Supply of earth electrode mild steel galvanized, light class, IS:1239(PART-I)-1979.earth electrode pipe should be with 3 mm thick, 50 mm dia and perforated (staggered),5 mm dia holes, 2 nos per 305 mm length with clamp of MS FLAT (galvanised) of size 35 mm x 6 mm (SPEC.NO.226 STD). Earth pipe should include CI threaded cap. Materials to be procured and designed as per PCSTE/ER'S DRG. NO. SI/TYP/0097 dated 25.03.2025 | Numbers | 2.00 | 1,496 | 2,992 |
| 10 | Supply of MS FLAT (SPEC. NO. 226 STD or latest) of size 35 mm x 6 mm with length 5 mtr with holes of 12 mm dia at both ends as per CSTE/ER'S DRG. NO. S&T-1/2007 (or latest). | Numbers | 2.00 | 911 | 1,822 |
| 11 | Fixing of earth electrode including laying and installation of MS flat of size 35 mm x 6 mm with length 5 mtr or as per extant practice of Eastern Railway. As per PCSTE/ER'S DRG. NO. SI/TYP/0097 dated 25.03.2025 or latest. for apparatus cases, signal post & other equipment as per instruction of site engineer. Provision for fixing MS flat at apparatus cases/ signal post/other equipment should be made by the firm at site. Where required necessary holes to be drilled on the MS Flat . Full threaded bolts of 10 mm dia and length 40 mm should be welded in the apparatus cases in such way that the MS flat at apparatus case end can be fixed from outside or from inside (bolts of 10 mm dia and length 40 mm should be supplied by the contructor). Welding arrangement with accessories and welding materials should be arranged by the contractor for fixing of bolts at equipment end where required as per instruction of site engineer. All hardware and other miscellaneous materials required for installation to be supplied by the contractor except earth electrodes and MS flat. Sig. Cable as provided by Railway is also to be laid and terminated on Earth Electrode and to GI Wire/GI Flat in Location Box. | Numbers | 2.00 | 1,161 | 2,322 |
| 12 | Provision of cement concrete enclosure for earth electrodes as per DRG. NO. S&T/C-36(NKG). This includes supply of all materials by the contractor duly inspected | Numbers | 2.00 | 571 | 1,142 |
| Schedule total | ₹2,46,904 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCCACSNo.10.pdf
ATTACHMENT
ChangesinBGFormat.pdf
ATTACHMENT
AnnexureUV_1.pdf
ATTACHMENT
AnnexureU-VII.pdf
ATTACHMENT
AnnexureU-VI.pdf
ATTACHMENT
GCC2022_1.pdf
ATTACHMENT
REVISED_FORMAT_FOR_CERTIFICATE_28042023.pdf
ATTACHMENT
AnnexureIV.pdf
ATTACHMENT
AnnexureU-VIII.pdf
ATTACHMENT
Tele_Cir_9-20231.pdf
ATTACHMENT
AnnexureIAnnexureIIandAnnexureIII.pdf
ATTACHMENT
GCCACSNo.2.pdf
ATTACHMENT
GCCACSNo.3.pdf
ATTACHMENT
GCCACSNo.6.pdf
ATTACHMENT
GCCACSNo.4.pdf
ATTACHMENT
GCCACSNo.9.pdf
ATTACHMENT
GCCACSNo.7.pdf
ATTACHMENT
TechnicalcircularNo.123regardingPVCInsulatedRailwaySignallingIndoorSingle_Multicorecable.pdf
ATTACHMENT
GCCACSNo.8.pdf
ATTACHMENT
GCCACSNo.1.pdf
ATTACHMENT
GCCACSNo.5.pdf
ATTACHMENT
AnnexureVIBContractualTurnoverGCC2022.pdf
ATTACHMENT
LetterofcreditAnnexure-B.pdf
ATTACHMENT
GCCACS.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .