Widening and Strengthening of Debai Rajghat Road (ODR) in Km. 1 to 8(675)

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the excavation earth to the extent required and utilising the remaining earth locally for road work.Including cost of all material, labour, T&P, royality, labour cess and all taxes complete but excluding cost of GST.

Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401.Including cost of all material, labour, T&P, royality, labour cess and all taxes complete but excluding cost of GST.

Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300-2.Including cost of all material, labour, T&P, royality, labour cess and all taxes complete but excluding cost of GST.

Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2. (Lead 2.00 KM) Including cost of all material, labour, T&P, royality, labour cess and all taxes complete but excluding cost of GST..

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with grader in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.Including cost of all material, labour, T&P, royality, labour cess and all taxes complete but excluding cost of GST.

Providing and laying and spreading and compacting graded stone aggregate to wet mix macadam Stablized (with emulsion SS-2 @ 3.5% and OPC cement @1% by wt. of mix) specification including premixing the material with water at OMC in mechanical mix plant carriage of mix material by Tipper to site , laying in uniform layers with paver in sub base/base coarse coarse on well prepared surface and compacting with vibratory roller to achieve the desired density.as per MORT&H Specification Clause 504.Including cost of all material, labour, T&P, royality, labour cess and all taxes complete but excluding cost of GST.

Providing and applying tack coat with bitumen VG-10 using bitumen pressure distributor at the rate of 0.25 kg per sqm on the prepared Granular surface treated with primer cleaned with mechanical broom.Including cost of all material, labour, T&P, royality, labour cess and all taxes complete but excluding cost of GST.

Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects. Including cost of all material, labour, T&P, royality, labour cess and all taxes complete but excluding cost of GST.

Providing and applying tack coat with bitumen VG-10 using bitumen pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.Including cost of all material, labour, T&P, royality, labour cess and all taxes complete but excluding cost of GST.

Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects Including cost of all material, labour, T&P, royality, labour cess and all taxes complete but excluding cost of GST.

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam (G-3) specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density.Including cost of all material, labour, T&P, royality, labour cess and all taxes complete but excluding cost of GST.

Construction of un-reinforced, dowl jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30(Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges,steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer,sealant, dowel bars near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days,using curing compound (where specified) and water finishing to lines and grade as per drawing and finished with Power Trowel Cum Floter-Trimix Flooring Machine. Technical Specification Clause 1501 S.I. No.20.12 (b).Including cost of all material, labour, T&P, royality, labour cess and all taxes complete but excluding cost of GST.

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres.as per MORT&H Specification Clause 202,(II)A. Including cost of all material, labour, T&P, royality, labour cess and all taxes complete but excluding cost of GST.

Plain cement concrete 1:3:6 nominal mix with crushed stone aggregate 40 mm nominal size mechanically mixedIncluding cost of all material, labour, T&P, royality, labour cess and all taxes complete but excluding cost of GST. (For Minor Bridge)

Plain cement concrete 1:3:6 nominal mix with crushed stone aggregate 40 mm nominal size mechanically mixed Including cost of all material, labour, T&P, royality, labour cess and all taxes complete but excluding cost of GST. (For Drain & Culvert)

Brick masonry work in 1:3 in sub-structure complete excluding pointing and plastering, as per drawing and Technical Specifications.As per MORT&H Specification Clause 13.1(1300 & 2200).Including cost of all material, labour, T&P, royality, labour cess and all taxes complete but excluding cost of GST. (For Minor Bridge)

Brick masonry work in 1:3 in sub-structure complete excluding pointing and plastering, as per drawing and Technical Specifications.As per MORT&H Specification Clause 13.1(1300 & 2200).Including cost of all material, labour, T&P, royality, labour cess and all taxes complete but excluding cost of GST. (For Drain & Culvert)

Furnishing and Placing Reinforced/ Prestressed cement concrete (M20) in Sub-structure as per drawing and Technical Specification Including cost of all material, labour, T&P, royality, labour cess and all taxes complete but excluding cost of GST.

Furnishing and Placing Reinforced/ Prestressed cement concrete (M25) in sub-structure as per drawing and Technical Specification Including cost of all material, labour, T&P, royality, labour cess and all taxes complete but excluding cost of GST.

Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications.Including cost of all material, labour, T&P, royality, labour cess and all taxes complete but excluding cost of GST. (For Minor Bridge)

Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications.Including cost of all material, labour, T&P, royality, labour cess and all taxes complete but excluding cost of GST. (For Drain & Culvert)

Sand Filling in Foundation Trenches as per Drawing & Technical Specification 304,12.3 Including cost of all material, labour, T&P, royality, labour cess and all taxes complete but excluding cost of GST.

Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 110 mm dia PVC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical Specifications Including cost of all material, labour, T&P, royality, labour cess and all taxes complete but excluding cost of GST. (For Minor Bridge)

Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 110 mm dia PVC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical Specifications Including cost of all material, labour, T&P, royality, labour cess and all taxes complete but excluding cost of GST. (For Culvert)

Providing and fixing in position 20 mm thick premoulded joint filler in expansion joint for fixed ends of simply supported spans not exceeding 10 m to cater for a horizontal movement upto 20 mm, covered with sealant complete as per drawing and technical specifications.. as per MoRT&H Specification 2605(iii).14.17Including cost of all material, labour, T&P, royality, labour cess and all taxes complete but excluding cost of GST.

Plastering with cement mortar (1:3 ) on brick work in sub-structure as per Technical Specifications Including cost of all material, labour, T&P, royality, labour cess and all taxes complete but excluding cost of GST.(For Minor Bridge)

Plastering with cement mortar (1:3 ) on brick work in sub-structure as per Technical Specifications Including cost of all material, labour, T&P, royality, labour cess and all taxes complete but excluding cost of GST.(For Culvert)

Flexible Apron :Construction of flexible apron 1 m thick comprising of loose stone boulders weighing not less than 40 kg beyond curtain wall.Including cost of all material, labour, T&P, royality, labour cess and all taxes complete but excluding cost of GST.

Providing and laying Filter material underneath pitching in slopes complete as per drawing and Technical specification Including cost of all material, labour, T&P, royality, labour cess and all taxes complete but excluding cost of GST.

Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications Including cost of all material, labour, T&P, royality, labour cess and all taxes complete but excluding cost of GST.

Back filling behind abutment, wing wall and return wall complete as per drawing and Technical Specification as per MORT&H specification 710.1.4.of IRC:78 & 2200.Including cost of all material, labour, T&P, royality, labour cess and all taxes complete but excluding cost of GST.(For Minor Bridge)

Back filling behind abutment, wing wall and return wall complete as per drawing and Technical Specification as per MORT&H specification 710.1.4.of IRC:78 & 2200.Including cost of all material, labour, T&P, royality, labour cess and all taxes complete but excluding cost of GST. (For Culvert)

Supply ,Laying & Fixing of NP-3 Hume Pipe 350 mm dia. Including cost of all material, labour, T&P, royality, labour cess and all taxes complete but excluding cost of GST.

Supply ,Laying & Fixing of NP-3 Hume Pipe 600 mm dia. Including cost of all material, labour, T&P, royality, labour cess and all taxes complete but excluding cost of GST.

Proding & fixing empty cement bag filled by local earth, hand sewing with suja & sutli and placing in position with in 60 M.Iincluding cost of E.C. Bags, all labour, material and T&P required for proper completion of work. But excluding cost of GST.

Brick on edge pavement with straight over burnt brick,laid dry joints filled with local sand including prepration of base to proper slope and its ramming,spreading layer of 1cm.(3/8") depth of local sand over the subgrade and including supply of all material,labour,T&P etc required for proper complition of the work.S.I. No.763 Including cost of all material, labour, T&P, royality, labour cess and all taxes complete but excluding cost of GST.

Supply ,Laying & Fixing of NP-3 Hume Pipe 1200 mm dia. Including cost of all material, labour, T&P, royality, labour cess and all taxes complete Including cost of all material, labour, T&P, royality, labour cess and all taxes complete but excluding cost of GST.

Removing all type of Hume Pipes and Stacking within a lead of 1200 metres including Earthwork and Dismantling of Masonry Works. As per MORT&H Specification cluase 2.4(ix) C (Above 900 mm) Including cost of all material, labour, T&P, royality, labour cess and all taxes complete but excluding cost of GST.

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35-2015 The finished surface to be level, uniform and free from streaks and holes. Including cost of all material, labour, T&P, royality, labour cess and all taxes complete but excluding cost of GST.

Providing and laying of hot applied thermoplastic compound 5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 5 mm is exclusive of surface applied glass beads as per IRC:35-2015 The finished surface to be level, uniform and free from streaks and holes. Including cost of all material, labour, T&P, royality, labour cess and all taxes complete but excluding cost of GST.

Ashok Kumar Chhabra Constructions Pvt.Ltd.

Krishna Infratec

Noshe Ali Contractor