New Co-operative Store

(A Government of India Enterprise)

NMDC WORKS - KIRANDUL

BIOM Kirandul Complex

Name of Work : Construction of New Co-operative Store near Football Ground at BIOM, Kirandul Complex.

Tender Enquiry No.: Works-Kirandul/ Co-operative Store/2507/2026/50 Dt: 26/06/2026

MSTC Ref. No.: NMDC/Kirandul/Works/7/26-27/ET/233

Name of the Bidder

Sl. NO DESCRIPTION / PRICE QUOTED FOR AMOUNT

1 Total Quoted Amount Schedule - A i/c GST

2 Total Quoted Amount Schedule - B i/c GST

3 Total Quoted Amount Schedule - C i/c GST

4 Total Quoted Amount Schedule - D i/c GST

5 Total Quoted Amount Schedule - E i/c GST

TOTAL QUOTED AMOUNT INCLUDING GST

1. Free Issue Material: NIL

(A Government of India Enterprise)

NMDC WORKS - KIRANDUL

BIOM Kirandul Complex

Name of Work : Construction of New Co-operative Store near Football Ground at BIOM, Kirandul Complex.

Tender Enquiry No.: Works-Kirandul/ Co-operative Store/2507/2026/50 Dt: 26/06/2026

MSTC Ref. No.: NMDC/Kirandul/Works/7/26-27/ET/233

Name of the Bidder

Sl. NO DESCRIPTION OF ITEM UNIT QUANTITY RATE (Rs) Inclusive of all taxes and duties, levies but Including GST @18% AMOUNT

SCHEDULE - A CIVIL WORKS

1 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:4:8 or leaner mix (including equivalent design mix) Cum 68.6 1488.56

2 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. Cum 38.83 3515.74

3 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar Cum 64.04 2039.6

4 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead Of area 3 sq. metres and below Each 16 363.53

5 Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. Kg 4800 5.59

6 Dismantling precast concrete or stone slabs in walls, partition walls etc. including stacking within 50 metres lead : Thickness above 40 mm up to 75 mm Sqm 87.75 429.21

7 Dismantling aluminium/ Gypsum/wooden/Plain Asbestos Sheet false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer- in-charge. Note: All serviciable materials after dismantling shall be deposited at the Civil maintenance office / CSD / or any other location as directed by the Engineer-in-Charge Sqm 263.98 55.79

8 Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: G.S. Sheet Note: All serviciable materials after dismantling shall be deposited at the Civil maintenance office / CSD / or any other location as directed by the Engineer-in-Charge Sqm 402.6 163.3

9 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50 m and lift upto 1.5 m, disposed earth to be levelled and neatly dressed.

a All kinds of soil Cum 288 175.73

b Ordinary rock Cum 36 493.91

c Hard rock (blasting prohibited) Cum 36 1418.62

10 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

a All kinds of soil. Cum 620.8 257.7

b Ordinary rock Cum 77.6 626.62

c Hard rock (blasting prohibited) Cum 77.6 1507.82

11 Extra rates for quantities of works, executed: In or under water and/or liquid mud, including pumping out water as required. ( 20% Rate of Item No 1.01 (a) i.e 155.60 ) Cum 186.24 35.15

12 Extra for every additional lift of 1.5 m or part thereof in excavation /banking excavated or stacked materials. All kinds of soil. Cum 180 125.53

13 Supplying and filling in plinth with River sand under floors, including watering, ramming, consolidating and dressing complete. Cum 20.72 2102.51

14 Excavating, supplying, stacking and filling of local earth (including royalty) by mechanical transport upto a lead of Skm also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift. Cum 540 693.5

15 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). Cum 56.12 6743.87

16 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) Cum 95.35 8955.29

17 Extra for laying concrete in or under water and/or liquid mud including cost of pumping or bailing out water and removing slush etc. complete. Note for item No. 4.15 :- The quantity will be calculated by multiplying the depth measured from the sub-soil water level up to centre of gravity of concrete under sub-soil water level with quantity of concrete in cum executed under sub-soil water. The depth of centre of gravity shall be reckoned correct to 0.1m. (0.05m or more shall be taken as 0.1m and less than 0.05m ignored). Cum 133.65 1087.81

18 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) Cum 37.6 10744.42

19 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). Cum 260.47 11390.45

20 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Cold twisted bars / TMT bars Kg 39342 106.77

21 Centering and shuttering including strutting, propping etc. and removal of form for :

a Foundations, footings, bases of columns, etc. for mass concrete. Sqm 126.75 388.23

b Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. Sqm 224 834.08

c Suspended floors, roofs, landings, balconies and access platform. Sqm 750.98 917.98

d Lintels, beams, plinth beams, girders, bressumers and cantilevers. Sqm 240.32 729.04

e Columns, Pillars, Piers, Abutments, Posts and Struts. Sqm 289.92 951.69

f Stairs, (excluding landings) except spiral-staircases. Sqm 66.42 757.3

g Weather shade, Chajjas, corbels etc., including edges. Sqm 30.5 941.59

22 Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand). Cum 38.11 7238.13

23 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 1463.34 194.04

24 Carriage of material by Mechanical Transportation including loading, unloading and stacking or levelling complete as directed by Engineer-in-charge.

a Earth, Lead upto 1.0. Km Cum 1130.36 215.37

b Earth, Lead upto 2.0. Kms Cum 242.22 243.35

c Earth, Lead upto 3.0. Kms Cum 242.22 271.05

25 Preconstruction curative cum preventive antitermite treatment to the building under construction by providing (i) surface treatment by spreading emulsion over the plinth area before laying the base concrete under floors @ 5.0 Liters/Sqm. (ii) Pumping the emulsion in plinth masonary on filling side at floor junction @7.5 Litre/Sqm. (iii) Pumping the emulsion from outer side of the plinth below ground alround the masonry @ 5.0 Litres/Sqm. as per I S 8944. Emulsion( 1 Chlorpyrifos : 19 Water) with five years service gurantee (Measurements to be taken for plinth area). Sqm 319.2 306.95

26 Providing and fixing up to floor five level of Pre-cast cement concrete solid block masonry made of 50% cement concrete 1:5:8 in volume (1 Cement: 5 Coarse sand: 8 Graded Stone aggregate 10 mm and down gauge size) and 50% of graded stone aggregate pieces of 100 mm and down gauge size including hoisting and setting in position with cement mortar 1:6 (1 Cement: 6 Coarse sand) including centering and shuttering etc., complete. Cum 110.76 6009.3

27 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand including finishing the top smooth Sqm 35.23 741.81

28 6 mm cement plaster of mix : 1:3 (1 cement: 3 fine sand) Sqm 847.9 297.45

29 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) Sqm 1010.38 353.78

30 15 mm cement plaster on rough side of single or half brick wall of mix : 1:4 (1 cement: 4 coarse sand) Sqm 591.01 407.63

31 Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) Cum 22.32 7961.87

32 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. Sqm 11.7 610.88

33 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/clerestory windows & desertory other Frames/Chowkhat fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Make: Century, Black Cobra, SNG, Kit Ply Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Frame size 65 x 125 mm Metre 30.6 1367.78

34 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S. screws, all as per direction of Engineer-In- Charge. 30 mm thick. (Note: stainless steel butt hinges and shall be paid separately). Make: Century, Black Cobra, SNG, Kit Ply Sqm 7.56 4716.56

35 Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for - (i) Sites with basic wind speed > 45 m/sec as per IS 875 — Part 3 (ii) Sites with structure height more than 20m for all wind speeds Three track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body.

Using R2 series with frame (70 mm & above) x (40 mm & above) & both glazed and fly screen sash (25 mm & above) x (50 mm & above) with zinc alloy (zamak) powder coated touch locks with hook. (Height upto 1.2 metre). Sqm 36 10883.6

36 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

a For fixed portion. Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) Kg 20.16 534.45

b For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) Kg 8.64 637.02

37 Providing and fixing fly proof stainless steel grade 304 wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. With Aluminium beading. Sqm 0.96 1215.71

38 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.50 mm thickness Sqm 1.92 1490.2

39 "Providing and fixing with glass of 12 mm thick toughened glass with SS 304 side connector, top patch, bottom patch and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes and cuts etc. and fixing required door fittings and accessories viz. , glass to glass center lock, door bottom lock etc. as directed by Engineer-incharge.All Fittings and accessories shall be of the make: Dormakaba, Enox, Ozone, Icon)" (floor spring, handles to be paid separately). Sqm 183.16 5272.64

40 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. Kg 758.4 235.97

41 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature and fixing of toughened glass with all accessories ( wherever required ) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, ( for payment purpose only weight of stainless steel members shall be considered excluding toughened glass and fixing accessories such as nuts, bolts, fasteners etc. ) Kg 235 764.68

42 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work. sqm 37.92 154.34

43 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand and manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Size of Tile size upto 1.28 sqm sqm 573.52 2036.33

44 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand and manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size 600*600 mm Sqm 12.42 1450.2

45 Providing and laying Vitrified tiles in wall in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand and manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed vitrified wall tiles polished finish of size 600*1200 mm Sqm 52.99 1780.81

46 Providing and fixing 18mm thick granite stone gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade. Area of slab over 0.50 sqm Sqm 360.3 5084.94

47 Providing edge moulding to 18mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work Metre 131.2 505.83

48 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75mm deep chase Metre 146.8 302.1

49 Neat cement punning Sqm 28.28 79.15

50 Providing and fixing false ceiling at all heights including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS: 277 and consisting of angle cleats of size 25 mm wide × 1.6 mm thick with flanges of 27 mm and 37 mm at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia × 50 mm long with 6 mm dia bolts, the other flange of cleat fixed to the angle hangers of 25 × 10 × 0.50 mm of required length with nuts and bolts of required size, and the other end of angle hanger fixed with intermediate G.I. channels 45 × 15 × 0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm shall be fixed at 450 mm centre to centre in a direction perpendicular to G.I. intermediate channels with connecting clips made out of 2.64 mm dia × 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channels with the help of dry wall screws of size 3.5 × 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in three layers covering up to 150 mm on both sides of joint and two coats of primer suitable for the board, all as per manufacturer’s specification, and also including the cost of making openings for light fittings, grills, diffusers, and cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer-in-Charge but excluding the cost of painting with

With 15 mm thick Tegular edged light weight calcium sliciate false ceiling tiles Sqm 58.32 1342.24

51 Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns as per CPWD Specification 2019, to be laid in true horizontal level suspended on inter- locking metal T-Grid of hot dipped galvanised iron section of 0.33 mm thick (galvanized @ 120 grams per sqm including both sides)comprising of main-T runners of size 24x38 mm of length 3000 mm,cross - T of size 24x32 mm of length 1200 mm and secondaryintermediate cross-T of size 24x32 mm of length 600 mm to formgrid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 12x50 mm long dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 76x25x25x1.6 mm fixed with grid and Z cleat of size 25x37x25x1.6 mm thick with precut hole on both 25 mm flange to pierce into 12x50 mm or even bigger size dash fastener if require, fixed with Glavanised iron perimeter wall angle or size 24x24x0.40 mm of length 3000 mm to be fixed on periphey wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directionsof the Engineer-in-Charge. With 15 mm thick Tegular edged light weight calcium sliciate false ceiling tiles Sqm 198.44 2184.93

52 Providing & Fixing wall caldding with elevation tiles of approved make, design and texture over external walls as per architectural drawings and instruction. The work shall include surface preparation, cleaning,leveling the the substrate applying suitable adhesive (cement plast) as per meanufacturer specifications, fixing elevation tiles over 12mm thick cement mortar 1:3(1cement:3 sand) and jointing with gray cement slurry @3.3Kg/Sqm incl pointing in white cement mixed with pigment of matching shade complete, edge finishing and cleaning of the surface after completion. Tiles shall be minimum 8-10 mm thickness (as per design) water resistant weatherproof and UV resistant suitable for external vertical application. Rate to inclue all materials labour adhesives,scaffolding, cutting wastage and necessary tools& tackles or complete execution of the work in all respect Sqm 31.6 1841.22

53 Providing and applying wall care putty over plastered surface to prepare the surface even and smooth complete Sqm 1858.28 260.07

54 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work. Sqm 1010.38 154.34

55 Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm). sqm 591.01 158.96

56 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 200x10 mm Each 6 354.82

57 Providing and fixing bright finished brass silding bolts with necessary screws etc. complete : 300x16 mm Each 6 318.95

58 Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. Each 4 846.1

59 Providing and fixing bright finished brass handles with screws etc. complete: 125mm Each 2 254.07

60 Providing and fixing powder coated aluminium hanging floor door stopper ISI marked of required colour and shade with necessary screws etc. complete. Twin rubber stopper Each 8 71.64

61 Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer HEAVY DUTY (having brand logo with IS, IS: 3564, embossed on the body, door weight upto 80 kg and door width fro 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. make DORMA/ENOX/HETTICH or equivalent. Each 6 2360

62 Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS 6315, having brand logo embossed on the body plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer in-charge. With brass cover plate minimum 1.25 mm thickness Each 6 2966.1

63 Providing and Fixing Stainlees Steel Door Handle of size 450X30mm on glass doors shutters including required tools and tackles etc Each 10 2922.31

64 Providing & fixing stainless steel letters of min. size 5" in height including moulding and fixing in position including cost of all necessary hardware, adhisives etc.completely. Each 100 354

65 Providing & fixing of ward robe/storage/showcase units 450mm deep made with 19mm thì plywood and finished with laminate/veneer of approved shade. This includes providing SS hardwares. The back side plywood of the unit must be 9mm thick complete. Sqm 9.7 15930

66 Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design."Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc." The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till thehanding over of the building for occupation. Sqm 202.95 4964.87

Base frame work for ACP cladding is payable under the relevant aluminium items. The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.

67 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing panelling, C.P. brass stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. ( paneling and dash fasteners to be paid for separately) : Powder coated aluminium (minimum thickness of powder coating 50 micron) Kg 913.28 525.59

68 Suplying and fixing of 12mm thick BWP plywood confirming to IS specfication for existing wall surface as directed by Engineer -incharge. Sqm 54 1416

69 Providing & Fixing decorative high pressure laminated sheet of 1 mm thick plain / wood grain in gloss/matt/suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS: 2046 Type S, inch ding cost of adhesive of approved quality. Sqm 54 1534

70 Supplying and Fixing frosted film of high quality materils resistant to scratches & fading with thickness 240 micron on toughened glass doors/pertitions etc as per provided design including cleaning and prepration of glass surface, all required tools and tackles for fixing etc Sqm 23.1 1400.95

71 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - Part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover Sqm 60.04 3616.67

72 Providing and fixing ball bearing for rolling shutters. Each 8 487.43

73 Extra for providing mechanical device chain and crank operation for operating rolling shutters. Exceeding 10.00 sqm and upto 16.80 sqm in the area Sqm 60.04 1268.54

A Total Cost including GST (Schedule - A)

B Percentage Over/ Below Estimated cost of Schedule (Input just the number). Incase of not mentioning the percentage in any schedule the quoted percentage for that schedule shall be considered as Zero. (Percentage to be quoted in the coloured cell)

C Total Quoted Amount Including GST (Schedule - A)

1 The bidder shall quote the percentage above, below, or at par with the value of each schedule, in the spaces provided above. (PERCENTAGE TO BE QUOTED BY THE BIDDER IN THE COLOURED UNLOCKED CELLS ONLY UP TO TWO DECIMAL POINTS. FOR EXAMPLE, 1.2 PERCENTAGE ABOVE THE ESTIMATED COST OF SCHEDULE SHALL BE ENTERED AS 1.20; 1.2 PERCENTAGE BELOW THE ESTIMATED COST OF SCHEDULE SHALL BE ENTERED AS -1.20 ; ON PAR WITH THEESTIMATED COST OF SCHEDULE SHALL BE ENTERED AS 0.00 )

2 The bidder has to mention their name at designated place highlighted above

3 The Grand Total and the Total Premium percentage shall be auto-calculated based on the schedule-wise premiums quoted by the bidders.

(A Government of India Enterprise)

NMDC WORKS - KIRANDUL

BIOM Kirandul Complex

Name of Work : Construction of New Co-operative Store near Football Ground at BIOM, Kirandul Complex.

Tender Enquiry No.: Works-Kirandul/ Co-operative Store/2507/2026/50 Dt: 26/06/2026

MSTC Ref. No.: NMDC/Kirandul/Works/7/26-27/ET/233

Name of the Bidder

Sl. NO DESCRIPTION OF ITEM UNIT QUANTITY RATE (Rs) Inclusive of all taxes and duties, levies but Excluding GST AMOUNT

SCHEDULE - B CIVIL WORKS (Sanitary and Water Supply)

1 Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing concealed cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. Each 2 14849.16

2 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: WhiteVitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps Each 2 2622.36

3 Providing and fixing mirror of 8 mm thick-including SS studs and cost of all materials, labour complete as directed by the Engineer-in charge Sqm 2.7 4130

4 Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 38mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighing not less than 263gms. Each 2 371.89

5 Providing and fixing toilet paper holder : C.P. brass Each 2 795.66

6 Providing and fixing CP Brass towel rail complete with CP brass brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm x 20mm size Each 2 701.86

7 Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour. weighing not less than 105 gms. Each 2 166.67

8 Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 75 mm outlet Sand Cast Iron S&S as per IS- 1729. Each 4 1542.77

9 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : 150 x 100 mm size P type. With C.C.Solid blocks. Each 2 2706.86

10 Constructing RCC manhole in 1:2:4 with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size), inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design :

(a) Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : RCC Work 1:2:4 Each 2 12584.68

(b) Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) : RCC Work 1:2:4 Each 3 25982.25

11 Providing and fixing on wall face unplasticised Rigid PVC pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Single socketed pipes.

a) 110 mm diameter Metre 140.5 373.63

b) 75 mm diameter Metre 54.3 246.31

12 Providing and fixing PVC reducer socket 110 x 75mm Each 5 134.79

13 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Providing and fixing double equal plain junction of required degree with door. 110x110x110x110 mm Each 2 231.81

14 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Single tee with door

b) 75x75x75 mm Each 6 162.56

a) 110 mm bend Each 15 148.85

b) 75 mm bend Each 5 104.84

b) 75 mm Each 8 90.78

17 PVC Cowl 110 mm Each 8 134.79

18 Shoe (Plain)

b) 75 mm Each 10 92.17

19 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.

b) 75 mm Each 25 365.95

20 Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil. Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. Metre 50 348.63

21 Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete :

a) 100 mm diameter Metre 50 439.16

b) 150 mm diameter Metre 30 688.84

c) 200 mm diameter Metre 20 960.65

22 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design:

a) 100 mm diameter S.W. pipe Metre 50 955.1

b) 150 mm diameter S.W. pipe Metre 30 1168.05

c) 200 mm diameter S.W. pipe Metre 20 1361.7

23 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work

a) 80 mm dia. nominal bore Metre 30 1031.28

b) 40 mm dia. nominal bore Metre 30 610.88

c) 25 mm dia. nominal bore Metre 20 463.07

24 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall

a) 40 mm dia. nominal bore Metre 20 695.92

b) 25 mm dia. nominal bore Metre 19.5 397.53

c) 15 mm dia. nominal bore Metre 44.2 283.93

25 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work)

a) 80 mm dia. nominal bore Each 4 1195.87

b) 40 mm dia. nominal bore Each 5 624.99

c) 25 mm dia. nominal bore Each 5 434.86

d) 15 mm dia. nominal bore Each 5 315.17

26 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :

a) 80 mm nominal bore Each 5 2578.5

b) 40 mm nominal bore Each 5 817.84

c) 25 mm nominal bore Each 5 616.18

27 Providing and fixing gun metal non- return valve of approved quality (screwed end) : 80 mm nominal bore Horizontal Each 1 3628.1

28 Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main : 25 mm nominal bore Each 2 481.93

29 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore. Each 4 501.73

30 Providing and fixing two way long nose bib cock / Automatic push cock Pllar cock with flange of aproved make heavy duty 15 mm nominal bore. Each 4 812.49

31 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931, 15mm nominal bore Each 4 568.56

32 Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore Each 4 96.18

33 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank Per litre 4000 10.89

34 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 15 mm nominal bore Each 4 402.78

35 Providing and fixing to the inlet mouth of rain water pipe stainless steel grating of required diameter. Each 5 54.15

36 Cutting holes up to 30x30 cm in walls including making good the same: With C.C.solid blocks Each 34 412.63

37 Cutting holes up to 15x15cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including finishing complete so as to make it leak proof. Each 21 447.48

38 Providing and fixing Health facuet with all fittings arrangement of approved quality and colours.Consider make: GROHE. Each 2 2950

39 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern Each 1 9516.28

A Total Cost including GST (Schedule - B)

B Percentage Over/ Below Estimated cost of Schedule (Input just the number). Incase of not mentioning the percentage in any schedule the quoted percentage for that schedule shall be considered as Zero. (Percentage to be quoted in the coloured cell)

C Total Quoted Amount Including GST (Schedule - B)

1 The bidder shall quote the percentage above, below, or at par with the value of each schedule, in the spaces provided above. (PERCENTAGE TO BE QUOTED BY THE BIDDER IN THE COLOURED UNLOCKED CELLS ONLY UP TO TWO DECIMAL POINTS. FOR EXAMPLE, 1.2 PERCENTAGE ABOVE THE ESTIMATED COST OF SCHEDULE SHALL BE ENTERED AS 1.20; 1.2 PERCENTAGE BELOW THE ESTIMATED COST OF SCHEDULE SHALL BE ENTERED AS -1.20 ; ON PAR WITH THE ESTIMATED COST OF SCHEDULE SHALL BE ENTERED AS 0.00 )

2 The bidder has to mention their name at designated place highlighted above

3 The Grand Total and the Total Premium percentage shall be auto-calculated based on the schedule-wise premiums quoted by the bidders.

(A Government of India Enterprise)

NMDC WORKS - KIRANDUL

BIOM Kirandul Complex

Name of Work : Construction of New Co-operative Store near Football Ground at BIOM, Kirandul Complex.

Tender Enquiry No.: Works-Kirandul/ Co-operative Store/2507/2026/50 Dt: 26/06/2026

MSTC Ref. No.: NMDC/Kirandul/Works/7/26-27/ET/233

Name of the Bidder

Sl. NO DESCRIPTION OF ITEM UNIT QUANTITY RATE (Rs) Inclusive of all taxes and duties, levies but Excluding GST AMOUNT

SCHEDULE - C ELECTRICAL WORKS

1 Wiring for light point / fan point/ exhaust fan point / call bell point with 1.5 sq.mm. FRLS / FR PVC insulated copper conductor single core cable in Surface/ Recessed (concealed) medium class PVC conduit/ casing caping, with modular switch, modular plate, suitable GI box, including ceiling rose as required and earthing the point with with 1.5 sq.mm. FRLS / FR PVC insulated copper conductor single core cable etc as required. Extra Points for future use shall be terminated on suitable Ceiling Rose. (Rates shall be same for short, medium and long points). Nos 158 1256.81

2 Supply and fixing in the same board modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required 5/6A switch and 3pin 5/6 A socket outlet. Nos 12 239.24

3 Supplying and fixing 1 or 2 Module (75mmX75mm) size/ modules, GI box alongwith modular base & cover plate for modular switches in recess/surface etc. as required Nos 8 316.86

4 Supplying and fixing 3 Module (100mmX75mm) size/ modules, GI box alongwith modular base & cover plate for modular switches in recess/surface etc. as required for Raw power Nos 12 347.69

5 Supplying and fixing 6 Module (200mmX75mm) size/ modules, GI box alongwith modular base & cover plate for modular switches in recess/surface etc. as required for UPS power Nos 24 427.44

6 Supplying and fixing 8 Module (125mmX125mm) size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required Nos 8 482.73

7 Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required

a) 5/6A Switch Nos 60 109.51

b) 15/16A Switch Nos 16 165.87

c) 3Pin 5/6A socket outlet Nos 60 129.71

d) 6Pin 15/16A socket outlet Nos 16 209.47

e) Bell Push 2 Module with indicator Nos 6 148.85

8 Wiring for circuit /submain/light/power plug wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in Surface/ Recessed including suitable size, medium class B PVC conduit/casing caping as reqired.

a) 2 x 1.5 Sq.mm + 1 x 1.5 Sq.mm earth wire. (For Light Circuit) Mtrs 750 247.75

b) 2 x 2.5 Sq.mm + 1 x 2.5 Sq.mm earth wire. (For Separate Board circuit) Mtrs 320 292.4

c) 2 x 4 Sq.mm + 1 x 4 Sq.mm earth wire. (For Power circuit) Mtrs 480 355.13

d) 2 X 6 Sq. mm + 1 X 6 Sq. mm. earth wire. (For main DB distribution) Mtrs 320 466.74

e) 4 x 10 Sq.mm + 2 x 6 Sq.mm earth wire. (For 3phase distribution) Mtrs 150 1068.61

9 Supplying and fixing of 25 mm size of medium class PVC conduit along with all accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. (For Earth GI wire, telephone and ethernet cable etc.) Mtrs 450 154.15

10 Supplying and drawing of 2 Pair, 0.5 Sq. mm. FRLS / FR PVC insulated annealed copper conductor, Unarmoured telephone cable in the existing concealed (Recessed) Steel / PVC conduct As required. Mtrs 350 40.4

11 Supply and fixing Modular telephone (RJ11) socket outlet on the existing modular switch box / cover plate including connections etc. as required. Nos 10 157.36

12 Supply and fixing of 50 pair telephone Junction box (Tag Block) made of 1.5 mm thick sheet steel drip proof with locking arrangement properly painted including Krone Module . Nos 1 2360

13 Supplying and fixing Modular type call bell/ buzzer (2 Module) suitable for single phase, 230 V, complete as required. Nos 5 105.26

14 Supply and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16A modular socket outlet and 15/16A modular switch, connection etc. as required. Nos 10 623.1

15 Installation, testing and commissioning of wall bracket/Ceiling Fitting of all sizes and shapes containing upto two GSL / CFL / LED lampfitting / LED spot light/4Feet LED batten light fitting complete with all accessories including connections by providing the required length of wire.etc. as required. Nos 82 126.51

16 Supply, fabricating, and Installing, the street / Flood Light light Bracket for fixing Street Light fittings / Flood Light Fitting / Blinkers / Post Top Lantern as per the shape given by the Engineer Incharge, it should be made with 1 meter lenghth 40 mm diameter, GI medium class pipe, 4 No. 16 mm nuts and bolts, 2 No. GI flat of 3 mm thick and 200 mm length, 40 mm width, for fixing the bracket to the wall / pole, complete with all accessories including connections etc. as required. Nos 10 708

17 Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper Nos 4 1660.87

18 Supplying energy efficient 300 mm sweep wall mounted fan decorative type as per latest BEE standards with double ball bearing including all accessories , blades etc. as required but without fan regulator as per make list. Nos 4 2950

19 Providing and fixing circular/ hexagonal g.i. box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick g.i. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the g.i. box by means of 3.3 mm dia round headed screws, one lock at the corners. clamp shall be made of 12 mm dia m.s. bar bent to shape as per standard drawing. Nos 20 118

20 Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required Nos 20 2902.8

21 Supplying and fixing 25 A rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning complete etc. as required. Nos 16 2156.4

22 Supplying and fixing following rating Four pole 240 / 415 V AC 'C' curve, 10 KA Breaking Capacity (MCB) miniature circuit breaker suitable for inductive load in the existing MCB DB complete with connections, testing and commissioning etc as required.

23 Supplying and fixing 5A to 32A rating single pole 240 / 415 V 'C' curve, 10 KA Breaking Capacity miniature circuit breaker suitable for inductive load of single pole in the existing MCB DB complete with connections, testing and commissioning etc as required. Nos 54 272.21

24 Supplying and fixing 5A to 32A rating Double pole 240 / 415 V 'C' curve, 10 KA Breaking Capacity miniature circuit breaker suitable for inductive load in the existing MCB DB complete with connections, testing and commissioning etc as required. Nos 15 697.52

25 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. complete as required. (But without MCB/RCCB/Isolator). 8 way (4 + 24), Double door Nos 5 6344.7

26 Supply, fixing & testing of 200 Amp 415 V AC, Four Pole wall/Surface and pole mounted Junction Box/Tap off Box (Bus bar Junction box) including Copper Bus bar having support insulator of 1.1 KV voltage grade for indoor installation, suitable for terminating upto 150 SQMM cable, with Powder coated CRCA Metallic sheet steel enclosure (minimum 1.6 mm thick sheet) & rubber gasket on door. with conduit knockouts having sufficient space for different cable sizes connections, weather resistant, dust & water proof, having suitable back mount frames, Colour: Grey, Make: Havells, L&T, ABB, BCH, Indoasian, Legrand, Nos 2 16962.5

27 accessories, and providing masonry enclosure made up of red bricks and with cover plate having locking arrangement and watering pipe of 2.7 meter long, with GI wire of 6 SWG from the plate till the funel etc. with charcoal/ coke and salt complete as required. The firm has to test the earth pit value and record the value on the earth pit cover with paint in black background and yellow letters. Nos 5 7945

28 Supplying and laying 6 SWG G.I. wire at 0.50 meter below ground level for conductor earth electrode, including connection/ termination with GI thimble & nut, bolt ,washer etc. as required. Mtrs 110 54.23

29 Supply of approved make/model energy efficient ISI mark exhaust fan 300 mm sweep, 230V AC supply 50 HZ single phase as complete with all standard accessories such as motor, blades & louvers, brackets , rubber cushion etc. as required, minimum 1350 rpm, metal blades with automatic shutters but without regulator for toilets. Nos 6 3009

30 Installation of exhaust fan upto 450mm sweep in the existing opening, including making good the damage, connections, testing commissioning complete etc. as required. Nos 6 472

31 Air Conditioner Point wiring for 6 pin 20/25 Amps modular socket outlet point, including 2 M modular socket with supply and fixing of 20A / 25A two modular Single Phase Motor starter switch including point wiring with 2 x 4 sq. mm+1 x4 sq. mm. FRLS PVC insulated multistrand copper conductor single core cable in Surface/ Recessed (concealed) including medium class PVC conduit/ casing caping, with modular base plate & cover plate, 2 Module suitable GI box (2 Nos) and earthing the point with 4 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. Rate shall be same for short, medium and long points including all accessories as required and as per approved make. Nos 9 2307

32 Spplying surface/recess mounted round shape (18-24)W LED downlighter with minimum 1125 lumen, 6500K suitable for operation on 230V 50Hz single phase AC Supply with electronic driver and 2KV surge protector and all accessories complete for ceiling/wall/surface etc, as required. CRCA Powder coated white housing, High Efficiency Translucence (HET) diffuser of polycarbonate, LED confirming to LM80 AND Lumen output to LM 79 and should also produce the certificate. Type test certificate report should be produced valid BIS certificate should be produced. Nos 48 1770

33 Supply of Recess mounted LED Light Fitting type Square shape LED DOWNLIGHTER (300X300) MM, i.e..1' X 1') (18-24) WATTAGE. 200 - 250 V, AC, 50 HZ, The Luminair shall be capable of producing 120 LUX for each Watt. Secondary lence should be provided On the LED. CRCA powder coated white housing,, High efficiency Translucence (HET) diffuser of polycarbonate, The Inbuilt driver shall have Surge protection of 3KV minimum and Over current / overload protection. LED COLOUR : 6500K WHITE COLOUR LED Conforming to LM 80 AND LUMEN output TO LM 79 AND should also produce the Certificate. Type test report should be produced. Valid BIS certificate should be produced. MAKE: BAJAJ / PHILIPS / GE / CROMTON / HAVELLS / SURYA / WIPPRO / SYSKA / OSRAM / HALONIX Nos 36 1770

34 Supply of Recess mounted LED Light Fitting LED Panel light of Size (600X600) MM, i.e., (2'X2') (34-36) Wattage. 200-250 V, AC, 50Hz. The Luminair shall be Capable of producing 100-120 Lux for each watt. Seconday lence should be provided on the LED. CRCA powder coated white housing, High Efficiency translucence (HET) diffuser of polycarbonate, The Inbuilt driver shall have Surge protection of 3KV Minimum and Over current /overload protection. LED Colour:6500K white colour LED conforming to LM80 AND Lumen Output to LM79 and should also produce the certificate. Type test Report should be produce. Valid BIS certificate should BE produced. Make: Bajaj/Wippro/GE/Crompton/Havells/ Nos 28 2360

35 Supply of minimum of 3-Watt Premium LED Spotlight/Wardrob lights, Colour Temperature Warm White and had a lighting angle of 60 degree to deliver the best decorative lighting. The light is made of high-quality material uased for home décor articles kitchen shelves, cabinet and wardrobe etc. Minimum one year complete warranty modern design spotlight comes with high quality LM 80 tested LED wide voltage range & high voltage protection: Spotlight has a eide voltage range of 150-300 VAC & High voltage protection up to 400VAC, surge protection up to 3KV protection the device from fluctuations for long lasting performance easy installation. flush and recess mounted with spring loaded suspension and for false ceiling. Approx cut out size 25mm to 50mm. Finish type polished materil metal polycarboante black body, glass made up of high qulaity materil (Exact LED light colour may be decided by EIC during site execution time) complete as required Nos 36 324.5

36 LED Rope /strip light with connector equilent to philips mini marathon LED Rope light with connection, pack of 20 meter (20M=One set ), IP 65 Water proof strip/rope light with 400 lumen/meter, warm white (2700K to 3000K) with superior light output, Robust material, including driver, silicon material, for indoor & outdoor applications, power source corded electric, warranty minimum 1 year on the product, approx 72 LED/meter with 400 lumens /meter and approx. power consumption of 6 W/Meter. (Exact LED light colour may be decided during final execution time) complete as required. Set 5 2950

37 Supply of approved make wall/celling mounted 4-Feet LED batten, fixture with minimum 1800 lumen, 6500K, suitable for operation on 230V 50HZ, single phase AC, supply with electronic driver and 2KV surge protector and all accessories complete for ceiling/wall/surface etc. as required. LED conforming to LM 80and 80 Lumne output to LM 79 and ahould also produce the certificate. type test report should be produced valid BIS cerificate should be produced. Nos 32 590

38 Supply of Flood light Lumn. (90-120) Watt light LED Luminaire / Fitting, Outdoor Application, IP 66 CLASS Protection. Luminaire to be provided with mounting brackets suitab;e for tower / pole mounting. The Luminair shall be capable of producing of 20 Lux for each watt. Secondary lence should be provided on the LED. The luminaire shall be suitable for working on 230 V, AC 50 HZ & Complete with driver. The inbuilt driver shall have surge and over current / Overload protection. LED COLOUR : YELLOW COLOUR LED Conforming to LM80 and output to LM 79 and should also produce the Certificate. Type test report should be produced, Valid BIS Certificate should be produced. Nos 6 5272.24

39 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of above 35 sq. mm and upto 120 sq. mm size direct in ground including excavation,sand cushioning, protective covering and refilling the trench etc as required. (Minimum 800 mm Depth) Mtrs 50 430.63

40 Supply of inverter type split AC only. AC cooling capacity TR 1.5 star rating stars 5 star as per latest BEE standard. Rated cooling capacity at 100% load watts>_ 5.2KW/18000 BTU/Hr, power supply V/Hz/Ph 230/50/1 Phase coil (condensor and eveparator) copper anti-corrosive treatment for IDU and ODU fins . Anti-corrosive coating required. Compresor type twin rotary. Refrigerant Eco-friendly, R32 or R410a, ISSER as per 5 star or above, fan speed 3 steps or more, function mode Auto/cool/fan/- shall have power saving mode, temperature setting option should be available. Remote control wireless with LCD display witgh 3M standard copper tube length with drain pipe. Warranty: 1 year comprehensive warranty for the whole AC unit and five years/as offered by OEM (whichever is more) for compressor unit from the date of commissioning. (For Detail see Technical Specification) Nos 4 59000

41 Supply of inverter type split AC only. AC cooling capacity TR 2.0 star rating stars 5 star as per latest BEE standard. Rated cooling capacity at 100% load watts>_ 6.2KW/24000 BTU/Hr, power supply V/Hz/Ph 230/50/1 Phase coil (condensor and eveparator) copper anti-corrosive treatment for IDU and ODU fins . Anti-corrosive coating required. Compresor type twin rotary. Refrigerant Eco-friendly, R32 or R410a, ISSER as per 5 star or above, fan speed 3 steps or more, function mode Auto/cool/fan/- shall have power saving mode, temperature setting option should be available. Remote control wireless with LCD display with 3M standard copper tube length with drain pipe. Warranty: 1 year comprehensive warranty for the whole AC unit and five years/as offered by OEM (whichever is more) for compressor unit from the date of commissioning. (For Detail see Technical Specification) Nos 5 70800

42 Supply of heavy duty wall mounted GI coated metallic stand for AC Outdoor unit (load carrying capacity minimum of 150Kg) as required Nos 9 560.5

43 Supply of extra copper tube from AC indoor unit to AC outdoor unit with 100% pure copper material as requitred Mtrs 40 295

44 Supply of extra foam heat isulated tube for AC copper tubes for (1.8Mt) complete as required Mtrs 40 177

45 Installation, testing and commissioning of all types of split AC units (1 Ton to 2 Ton) aling with outdoor units and its stand including all as required accessories and related works etc for AC. Nos 9 1416

46 Installation, testing and commissioning of Rope/Strip LED light including all required accessories and related works etc. Mtrs 100 24

47 Supply, Fixing, testing & Commissioning of the landscaping lighting fixture (BOLLARD) of minimum 7W, IP65 protection, minimum 400 lumen, 4000K (Warm White) of approved shade having minimum three years of warranty along with surge protection device of minimum 2 KV, necessary bracket for lighting fixture mounting including connection TB and earthing point and all connection as required. Light fitting equivalent to Philips cat No.LED Bollard BCP151 or Wipro Cat No. Fantasy Bollard LB14-880-xxx-30/65-05/08 or Havells Cat.No. Bamboo Bollard LHEVBDP616K008 only. Fitting shall be mounted on the existing foundation (Under Civil scope). Nos 6 11800

48 SITC of 10Watt LED two way (top&bottom) wall washer lights (LED) Crystal Corridor, Facades & Landscapes Aisle Creative Decoration indoor, Colour Temperature Warm White (2700 to 3000K) The light is made of high-quality material uased for home décor articles kitchen shelves, cabinet and wardrobe etc. Minimum one year complete warranty modern design spotlight comes with high quality LM 80 tested LED wide voltage range & high voltage protectioncolour will be decided by EIC during execution (Warmwhite, Blue, Green and Pink etc complete all required accessories & related work etc. Make: Halonix/Wipro/ Bajaj/Phillips/GE/CG/Havells/HPL/Syska. Nos 16 602

49 Providing, laying and fixing of 100 mm dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required Mtrs 48 1920.31

A Total Cost including GST (Schedule - C)

B Percentage Over/ Below Estimated cost of Schedule (Input just the number). Incase of not mentioning the percentage in any schedule the quoted percentage for that schedule shall be considered as Zero. (Percentage to be quoted in the coloured cell)

C Total Quoted Amount Including GST (Schedule - C)

1 The bidder shall quote the percentage above, below, or at par with the value of each schedule, in the spaces provided above. (PERCENTAGE TO BE QUOTED BY THE BIDDER IN THE COLOURED UNLOCKED CELLS ONLY UP TO TWO DECIMAL POINTS. FOR EXAMPLE, 1.2 PERCENTAGE ABOVE THE ESTIMATED COST OF SCHEDULE SHALL BE ENTERED AS 1.20 ; 1.2 PERCENTAGE BELOW THE ESTIMATED COST OF SCHEDULE SHALL BE ENTERED AS -1.20 ; ON PAR WITH THE ESTIMATED COST OF SCHEDULE SHALL BE ENTERED AS 0.00 )

2 The bidder has to mention their name at designated place highlighted above

3 The Grand Total and the Total Premium percentage shall be auto-calculated based on the schedule-wise premiums quoted by the bidders.

(A Government of India Enterprise)

NMDC WORKS - KIRANDUL

BIOM Kirandul Complex

Name of Work : Construction of New Co-operative Store near Football Ground at BIOM, Kirandul Complex.

Tender Enquiry No.: Works-Kirandul/ Co-operative Store/2507/2026/50 Dt: 26/06/2026

MSTC Ref. No.: NMDC/Kirandul/Works/7/26-27/ET/233

Name of the Bidder

Sl. NO DESCRIPTION OF ITEM UNIT QUANTITY RATE (Rs) Inclusive of all taxes and duties, levies but Excluding GST AMOUNT

SCHEDULE - D FIRE DETECTION AND ALARM SYSTEM

1 Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per specifications. Two Loop Panel. Nos 1 254367.94

2 Supplying, installation, testing & commissioning of intelligent addressable photothermal detector (is the combination of Smoke and Heat detector) complete with mounting base complete as required (below/above false ceiling) Make : IAS Morley, Siemens, Bosch, Honeywell, PYROX, Ravel Nos 48 3038.91

3 Supplying, installation, testing & commissioning of addressable manual call point compleet with back box protective cover and address setting, complete as required. Nos 4 4116

4 Supplying, installation, testing & commisssioning of intelligent addressable programmable sounder Addressable electronic hooter (with selectable tones) complete as required. Nos 4 2818.8

5 Supplying, installation, testing & commissioning of fault isolator module/loop isolator module (short circuit sections) complete with base as required. Nos 8 3477

6 Supplying, installation, testing & commissioning of addressable fire control module (addressable module) complete as required. Nos 4 3193.1

7 Supplying, installation, testing & commissioning of addressable phone control module with SITC of Intercom/SMS based Dialer System for sending fault message to minimum 6 mobile numbers / persons, complete as required. Make : IAS Morley, Siemens, Bosch, Honeywell, PYROX Nos 1 3855.06

8 Supplying & laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as required. Mtr 400 381.73

9 Supplying and drawing Single pair, 2-core, 1.5 sqmm, speaker cable, Fire Retardant (FRLS) PVC insulated copper conductor for fire alarming system in the existing surface / recessed in existing steel conduit including connections and interconnections etc. as required. Complete in all respects. Make : IAS Morley, Siemens, Bosch, Honeywell, PYROX, Ravel Mtr 200 57.42

10 Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and accessories like coupler etc. as required. Make : Jindal, SAIL Mtr 50 56.35

11 Supplying and fixing of 25 mm dia steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. Make : Jindal, SAIL Mtr 400 272.2

A Total Cost including GST (Schedule - D)

B Percentage Over/ Below Estimated cost of Schedule (Input just the number). Incase of not mentioning the percentage in any schedule the quoted percentage for that schedule shall be considered as Zero. (Percentage to be quoted in the coloured cell)

C Total Quoted Amount Including GST (Schedule - D)

1 The bidder shall quote the percentage above, below, or at par with the value of each schedule, in the spaces provided above. (PERCENTAGE TO BE QUOTED BY THE BIDDER IN THE COLOURED UNLOCKED CELLS ONLY UP TO TWO DECIMAL POINTS. FOR EXAMPLE, 1.2 PERCENTAGE ABOVE THE ESTIMATED COST OF SCHEDULE SHALL BE ENTERED AS 1.20 ; 1.2 PERCENTAGE BELOW THE ESTIMATED COST OF SCHEDULE SHALL BE ENTERED AS -1.20 ; ON PAR WITH THE ESTIMATED COST OF SCHEDULE SHALL BE ENTERED AS 0.00 )

2 The bidder has to mention their name at designated place highlighted above

3 The Grand Total and the Total Premium percentage shall be auto-calculated based on the schedule-wise premiums quotedby the bidders.

(A Government of India Enterprise)

NMDC WORKS - KIRANDUL

BIOM Kirandul Complex

Name of Work : Construction of New Co-operative Store near Football Ground at BIOM, Kirandul Complex.

Tender Enquiry No.: Works-Kirandul/ Co-operative Store/2507/2026/50 Dt: 26/06/2026

MSTC Ref. No.: NMDC/Kirandul/Works/7/26-27/ET/233

Name of the Bidder

Sl. NO DESCRIPTION OF ITEM UNIT QUANTITY RATE (Rs) Inclusive of all taxes and duties, levies but Excluding GST AMOUNT

SCHEDULE - E IT AND NETWORKING

1 Supply & Installation of minimum 24 Port Managed PoE Gigabit Switch with Minimum 4 SFP+Ports Active Component (CISCO) Nos 1 175820

2 10G LR SFP Modules for CISCO Switches Nos 2 15930

3 CAT 6.0 Certified 23AWG Copper cable (Box 305 M) Box 3 11210

4 Splicing & Termination of 12 OFC cores of OFC cable at both ends for uplink from old SP3 Building (Cable to be provide by NMDC) Nos 2 1180

5 Installation & Termination & Testing of CAT 6.0 Cat 6.0 certified 24 Port Jack panel (To be provided by NMDC) Nos 1 1180

6 Supply & Installation of 1M Cat 6.0 Patch cable for Rack Dressing Nos 20 120.36

7 Supply & Installation of 9 U Rack Nos 1 8260

8 Fixing of Cat 6.0 I/O Point including Gang Box, British style Faceplate and Cat 6.0 I/O module and testing Nos 20 413

9 Supply of 3M Duplex SM LC-LC OS2 OFC Patch cord Nos 2 1829

10 Supply & Fixing of 1'' PVC casing & capping as required Mtr 120 106.2

11 Supply & Fixing 1'' PVC Pipe as required Mtr 120 118

12 Supply & Fixing 1'' PVC Pipe as required Nos 12 7670

13 Supply & Installation of 16 Channel NVR with 8 TB HDD Nos 1 28910

14 12 Port LIU Nos 1 7670

15 Projet Management (Erection & Commissioning) Charges including all accessaries Documentation as required other Services Nos 1 57820

A Total Cost including GST (Schedule - E)

B Percentage Over/ Below Estimated cost of Schedule (Input just the number). Incase of not mentioning the percentage in any schedule the quoted percentage for that schedule shall be considered as Zero. (Percentage to be quoted in the coloured cell)

C Total Quoted Amount Including GST (Schedule - E)

1 The bidder shall quote the percentage above, below, or at par with the value of each schedule, in the spaces provided above. (PERCENTAGE TO BE QUOTED BY THE BIDDER IN THE COLOURED UNLOCKED CELLS ONLY UP TO TWO DECIMAL POINTS. FOR EXAMPLE, 1.2 PERCENTAGE ABOVE THE ESTIMATED COST OF SCHEDULE SHALL BE ENTERED AS 1.20 ; 1.2 PERCENTAGE BELOW THE ESTIMATED COST OF SCHEDULE SHALL BE ENTERED AS -1.20 ; ON PAR WITH THE ESTIMATED COST OF SCHEDULE SHALL BE ENTERED AS 0.00 )

2 The bidder has to mention their name at designated place highlighted above

3 The Grand Total and the Total Premium percentage shall be auto-calculated based on the schedule-wise premiums quoted by the bidders.