Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.3 LAccepted-AOC | L1 | Accepted-AOC Accepted due to lowest | |
| 2 | L2₹23.9 L+₹4.5 L (23.3%)Rejected-Finance FLAT NO B 205 S NO 296 2 DIVINE HOMES PORWAL ROAD LOHEGAON PUNE 411047 | PUNE | MAHARASHTRA | 411047 | L2 | Rejected-Finance Rejected due to not lowest | |
| 3 | L3₹24.4 L+₹5.0 L (26.1%)Rejected-Finance | L3 | Rejected-Finance Rejected due to not lowest | |
| 4 | L4₹24.9 L+₹5.6 L (28.8%)Rejected-Finance | L4 | Rejected-Finance Rejected due to not lowest | |
| 5 | L5₹26.4 L+₹7.1 L (36.5%)Rejected-Finance | L5 | Rejected-Finance Rejected due to not lowest |
Tender Value
Refer Docs
EMD Value
₹59,880
Closing Date
16 Oct 2020, 6:00 pmClosed
COL NK SAH
CWE (AF) LOHEGAON
MAINTENANCE, REPAIR AND REPLACEMENT OF DEFECTIVE EXTERNAL WATER SUPPLY PIPELINES AND VALVES AND MISC ITEMS AT TECH AREA, OMG AND NP AREA AT AFS PUNE UNDER GE (AF) LOHEGAON
2020_MES_377083_1
81804/E8
Open Tender
Miscellaneous Works
Item Rate
270 days
GE (AF) LOHEGAON
Please refer tender documents
5 documents required · 5 mandatory
₹500
GE (AF) LOHEGAON
₹59,880
Yes
10 Nov 2020
12 Sept 2020
19 Oct 2020
12 Sept 2020
16 Oct 2020
2 Oct 2020
Amount
Taking up or down unserviciable / old GI tubing any grade and fittings connections ( including dewatering of trench) and removal from site Complete all as specified and as directed by Engr-in-charge.
15mm dia bore
20 mm dia bore
25mm dia bore
40mm-to-80mm dia bore
Supply & lay and jointing tubing medium grade galvanised iron pipes, ISI marked with all fittings such as bends, tees, elbows, nipple, unions, short pieces, sockets etc fixed to walls ceiling or laid on floor / roof etc Complete all as specified and as directed by Engr-in-charge. of following sizes :-
15 mm dia bore
20 mm dia bore
25mm dia bore
40mm dia bore
50mm dia bore
Supply & lay and jointing tubing medium grade galvanised iron pipes, ISI marked with all fittings such as bends, tees, elbows, nipple, unions, short pieces, sockets etc and laid in trenches Complete all as specified and as directed by Engr-in-charge. of following sizes :-
20 mm dia bore
25mm dia bore
40mm dia bore
50mm dia bore
80mm dia bore
Taking up cast iron water mains with fittings ( including dewatering of trench) with spigot and socket ends and lead joint including burning out joints and recovering lead Complete all as specified and as directed by Engr-in-charge.
100 mm bore
150 mm bore
200 mm bore
250 mm bore
300 mm bore
Caulking existing leaking lead joint including jointing materials such as lead, lead wool, spurn yarn for the following sizes of CI pipe lines Complete all as specified and as directed by Engr-in-charge.
80 mm bore
100 mm bore
150 mm bore
200 mm bore
250 mm bore
300 mm bore
M & L bends (any type, radius and angle) tapers any type (straight bend, increasing, decreasing or double socked etc) tee pieces , single branch, junction, double branch, cross ( all sockets or socket and spigot) collars, caps plugs suitable for the pipe upto 150 mm bore Complete all as specified and as directed by Engr-in-charge.
M & L bends (any type, radius and angle) tapers any type (straight bend, increasing, decreasing or double socked etc) tee pieces , single branch, junction, double branch, cross ( all sockets or socket and spigot) collars, caps plugs suitable for the pipe 200 mm to 300 mm bore Complete all as specified and as directed by Engr-in-charge.
Taking down and S&F PVC Float valves , high pressure ,with polythene float and flynut complete ,screwed for iron pipe Complete all as specified and as directed by Engr-in-charge.
a)15 mm dia
a)20 mm dia
b) 25 mm dia
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil for cleaning surface area and cutting shurbes/grass & bushes and remove the material at various installation at site. Complete all as specified and as directed by Engr-in-charge.
Taking down unserviceable gun metal gate valves including S & F gun metal gate valves with iron wheel head screwed both end for iron pipe and fixed Complete all as specified and as directed by Engr-in-charge.
20mm dia bore
25mm dia bore
40mm dia bore
50mm dia bore
Excavation in trenches n. exc 1.5 m wide and n.exc 1.5 m in depth for laying of GI tubing / taking out of GI tubing and getting out in Complete all as specified and as directed by Engr-in-charge.
a) Soft /loose soil
b) Hard / dense soil
c) Soft disintegrated soil
Returning filling in including spreading levelling, watering and well ramming in layers n. exc 25cm with soil obtained from excavation Complete all as specified and as directed by Engr-in-charge.
Removing excavated soil / material n. exc 50 mtr and depositing where directed at a level n. exc 1.5 mtr above the starting point Complete all as specified and as directed by Engr-in-charge.
Demolishing or dismantling Concrete in ground floors and pavings n exc 15 cm thickness Complete all as specified and as directed by Engr-in-charge.
Cement concrete in foundations, filling and mass concrete(1:2:4) Complete all as specified and as directed by Engr-in-charge.
M&L for Construction of brick masonry valve pit inside measurement 1.2 m x 1.2 m x 90 cm in replacement complete with MS Sheet 3.00 mm thick cover and angle iron frame (40m x 40mmx 40mm) as per existing size including locking arrangement suitable for sluice valve 200 mm to 300mm and sheet cover with one coat of red oxide and two coat of Synthetic enamel paint and complete leveling refilling the unwanted existing trenches ,as per ground requirement Complete all as specified and as directed by Engr-in-charge.
M&L for Construction of brick masonry valve pit inside measurement 0.90m x 0.90m x 0.90m in replacement complete with MS Sheet 3.00 mm thick cover and angle iron frame (40m x 40mmx 40mm) as per existing size including locking arrangement suitable for sluice valve 80 mm to 150 mm and sheet cover with one coat of red oxide and two coat of Synthetic enamel paint and complete leveling refilling the unwanted existing trenches ,as per ground requirement Complete all as specified and as directed by Engr-in-charge.
M & L for Mechanical Joint clamp of (minimum thickness of 6mm) type,flap type,GP joint for CI,DI Pipe of size 80mm along with MS nut bolt washer Complete all as specified and as directed by Engr-in-charge.
M & L for Mechanical Joint clamp (minimum thickness of 6mm) type,flap type,GP joint for CI,DI Pipe of size 100mm along with MS nut bolt washer Complete all as specified and as directed by Engr-in-charge.
M & L for Mechanical Joint clamp (minimum thickness of 6mm) type,flap type,GP joint for CI,DI Pipe of size 150mm along with MS nut bolt washer Complete all as specified and as directed by Engr-in-charge.
M & L for Mechanical Joint clamp (minimum thickness of 6mm) type,flap type,GP joint for CI,DI Pipe of size 200mm along with MS nut bolt washer Complete all as specified and as directed by Engr-in-charge.
M & L for Mechanical Joint clamp (minimum thickness of 6mm) type,flap type,GP joint for CI,DI Pipe of size 250mm along with MS nut bolt washer Complete all as specified and as directed by Engr-in-charge.
M & L for Mechanical Joint clamp (minimum thickness of 6mm) type,flap type,GP joint for CI,DI Pipe of size 300mm along with MS nut bolt washer Complete all as specified and as directed by Engr-in-charge.
M & L DI water pipes with spigot and socket ends including rubber gasket joint Class K 7, in any length, laid in trenches Complete all as specified and as directed by Engr-in-charge.
100 mm bore
150 mm bore
200 mm bore
250 mm bore
300 mm bore
Taking out and S&F unserviceable CI sluice valve from exisiting position by opening the nuts , bolts and breaking of valve chamber including necessary earth work and excvation in any type of soil and S & F CI sluice valve with PN rating 1:6 conforming to IS 14846 duly ISI marked with iron wheel head HSS spindle and all other conected accessories such as gland packing, bolts, and nuts rubber gasket etc complete and making good the vlave chamber to match with the adjacent surface including brick / PCC block works, plastering etc for the following sizes Complete all as specified and as directed by Engr-in-charge.
80 mm bore
100 mm bore
150 mm bore
200 mm bore
250 mm bore
300 mm bore
Taking out water sample in clean container gettng the same tested from Deptt of Water and waste water examiner or NABL accredited lab Complete all as specified and as directed by Engr-in-charge.
Repairing of leakages/blockage GI pipeline of size 15 mm,20mm,25mm by replacing the Tees, bends, sockets,unions,nipple and providing the other materials required to complete the job including material, excavation and earth work Complete all as specified and as directed by Engr-in-charge.
Repairing of leakages/blockage GI pipeline of size 40mm,50mm by replacing the Tees, bends, sockets,unions,nipple and providing the other materials required to complete the job including material, excavation and earth work Complete all as specified and as directed by Engr-in-charge.
Repairing of leakages/blockage GI pipeline of size 80mm by replacing the Tees, bends, sockets,unions,nipple and providing the other materials required to complete the job including material, excavation and earth work Complete all as specified and as directed by Engr-in-charge.
Bib taps,PVC with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed Complete all as specified and as directed by Engr-in-charge.
Supply only Calcium Hypo Chlorite 65% chlorine content (Calcium based granular) Complete all as specified and as directed by Engr-in-charge.
BSK Construction
TAKSHASHILA ELECTRICALS
M/s. ANAND ENTERPRISES
M/S EAGLE ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .