Improvement of Road Connecting from Chikkanayakanahalli to Tiptur SH-253 from Km.0.00 to 5.00, Km.8.50 to 11.00 and Km.12.50 to 13.40 in Chikkanayakanahalli taluk,Tumkur District (Selected reaches) JOB No (CRIF-KNT-2026-27-147)

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned including removal and disposal of top organic soil not exceeding 150 mm in thickness.including cost of all materials, labour, usage charges of all machinery, loading, unloading, transportation lead, lifts, with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work(for new roads) In area of light jungle - By Mechanical Means using Dozer

Construction of unlined surface drains of average cross sectional area 0.40 sqm in soil to specified lines, grades, levels and dimensions to the requirement of clause 301 and 309. Excavated material to be used in embankmentincluding cost of all materials, labour, usage charges of all machinery, loading, unloading, transportation lead, lifts, with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work

Construction of Subgrade and Earthen Shoulders : Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 laid in layers not exceeding 250 mm thick and compacting it by mechanical means after adding water to its OMC, so as to achieve 97% compaction of maximum dry density and finish the surface to the required camber, grade and cross section etc., speading, grading by motor grador, consolidation by roller including cost of all materials, labour, usage charges of all machinery, loading, unloading, transportation lead, lifts, with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work (New road formation)

Scarifying the existing bituminous surface to a depth of 50 mm and disposal of scarified material including cost of all materials, labour, usage charges of all machinery, loading, unloading, transportation lead, lifts, with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work By Mechanical Means using Hydraulic excavator

Granular Sub-Base with Close/Coarse Graded Material (Table:- 400-1) Plant mix method. Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 including protection of edges of GSB layer,cost of all materials, labour, usage charges of all machinery, lighting, guarding, barricading, maintenance of diversion road, loading, unloading, transportation lead, lifts, with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work (Compacted thickness) Grading-II Material (Close graded) as per job mix

Wet Mix Macadam (Plant Mix Method): Providing, laying, spreading and compacting graded stone aggregate as per table 400-12 & 400-13, to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density of 98% including protection of edges of WMM layer, cost of all materials, labour, usage charges of all machinery, lighting, guarding, barricading, maintenance of diversion road, loading, unloading, transportation lead, lifts, with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work (Compacted thickness). (B) Laying using Grader as per job mix

Prime Coat: Prime Coat over WMM/WBM - Providing and applying primer coat with SS1 bitumen emulsion complying IS-8887 on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means.as per table-500-3, including cost of all materials, labour, usage charges of all machinery, loading, unloading, transportation lead, lifts, with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work

Dense Graded Bituminous Macadam: Grading -II :Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates as per table 500-7 of specified grading premixed with bituminous binder VG-30 paving bitumen as per clause 504.3.1 complying with IS-73-2013 of specified grading, premixed with bituminous binder at 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects including cost of all materials, labour, usage charges of all machinery, loading, unloading, transportation lead, lifts, with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work - 50-75 mm compacted thickness as per job mix

Providing and applying tack coat with bitumen emulsion (RS1) using emulsion pressure distributor at the rate of 0.25 kg per sqm on the prepared bituminous surface cleaned with mechanical broom & dusting by air compressor and spraying including cost of all materials, labour, usage charges of all machinery, loading & unloading, transportation lead, lifts, with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work

Bituminous Concrete: Grading -II : Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates as per table 500-7 of specified grading premixed with bituminous binder VG-30 paving bitumen as per clause 504.3.1 complying with IS-73-2013 of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler @2% by weight of agregate, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects including cost of all materials, labour, usage charges of all machinery, loading, unloading, stacking, transportation lead, lifts, with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work - 30-40 mm compacted thickness as per job mix