REPAIRS TO CERTAIN B/R MAINTENANCE INCLUDING DAY TO DAY MAINTENANCE TO MILITARY HOSPITAL (TECH AREA) AND MDC IN AREA OF AGE B/R-III UNDER GE (WEST) JABALPUR

Amount

Dismantling Floor, Hearth or Wall Tiling including cement mortar bedding [but not backing] and removing serviceable tiles to the stores and removing rubbish / debris of the premises complete all as specified and as directed.

Demolition of Brick / Stone Masonry built in Cement Mortar including all quoins arches pillars etc complete all as specified and as directed.

Taking down chowkhats or frame with shutter with out taking off shutter from the frame area not exc 1.5 Sqm Each complete all as specified and directed.

Taking down Chowkats or frame with shutters [without taking of shutter from the frame] exceeding 1.5 Sq.m but not exceeding 4.00 Sq.m each complete all as specified and as directed.

Demolition of Cement Concrete of any description and in any position not otherwise specifically provided for and removing rubbish to outside MD land complete all as specified and as directed.

Taking down Shutters of any description not exceeding 1.00 Sq.m each complete all as specified and as directed.

Taking down Shutters of any description exceeding 1.00 Sq.m but not exceeding 2.00 Sq.m each complete all as specified and as directed.

Dismantling boarding, any description, fixed in any position with scews complete and all as specified and directed.

Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for including reinforcement cut as required to facilliate demolition complete all as specified and directed.

M & L Machine cut Cudappha stone slab on cooking platform/shelf 20 to 25mm thick over and including 20 mm thick CM 1:4 cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all specified and directed.

M & L for RCC (1:2:4) nominal Mix using 20mm graded aggregate as in chajjas, parapets, facia, etc., complete all as specified and as directed.

M&L for RCC (1:2:4) nominal Mix using 20mm graded stone aggregate as in Fins, fascias, louvres, parapets, and railings exc. 60cm in height, newels, balustrade, and the like complete all as specified and as directed.

Use and waste of form work to face of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc, vertical or to batter surface fair finished complete all as specified and directed.

Use and waste of form work to Chajjas and similar items including edges etc complete all as specified and directed.

S&F Mild steel TMT bars 6mm to 8mm dia and cut to length bent to shape required, including cranking, bending and binding as in stirrups, spacers and binders etc. with MS wire (annealed) not less than 0.9mm dia complete all as specified and directed. Note : The reinforcement shall be welded with existing reinforcemnet after dismantaling of RCC Chajjas/ Parapets etc.

M & L 75mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base, sub floor of flooring, paving, path etc surfaces finished even and fair to receive top layer complete all as specified and directed.

M&L cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in roof kerbs/covet fillet complete all as specified.

Taking down cement plaster / terrazzo of any description thickness including raking out joints hacking for key scrubbing down with water complete all as specified and directed.

M&L for 10mm thick rendering in cement mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all specified and directed.

M&L rendering on concrete/brick surfaces 15mm thick in CM 1:4 using with water proofing compound as per manufacturer's instructions finished even and smooth without using extra cement complete all as specified. Note:- WPC will be measured and paid saperately.

M & L for rendering 5 mm thick in Cement Mortar 1:3 on fair faces of concrete surface of ceiling surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of newly plastered surfacces and applying three coats of white wash as in ceillings complete all as specified and as directed.

M&L for Preparing Newly Plastered Surfaces of internal wall and applying two Coats of oil emulsion distemper over one coat of primer over and including applying 1 mm thick wall care putty on plastered wall surfaces complete all as specified and as directed.

M&L for Preparing Newly Plastered Surfaces of external Walls and applying Two Coats of Cement Based Paint over a coat of primer complete all as as specified and as directed.

Supply only liquid water proofing compound complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 450 x 300mm x 7 mm, 450x350mm or 350x250mmx 7mm thick on vertical surfaces such as skirting/dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile with & including rendering 10 mm thick cement plaster in cement mortar 1:4 finished rough to fix tiles complete all as specified and directed.

M & L Glazed ceramic tiles 300mmx200mm x 6 to 7 mm thick, on vertical surfaces of walls (DADO) etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match (in patches to match the existing colour /shed) over and including 10mm thick rendering in CM 1:4 complete all as specified and directed..

M&L Non skid coloured ceramic tiles 7 to 8mm thick square/ rectangular area of Each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floor etc set and jointed in neat cement slurry and pointed in white cement with pigment to match, laid over and including 15mm thick cement screed bed in cement mortar 1:6 complete all as specified and directed.

M&L vitrified ceremic tiles 7 to 8 mm thick, in LIGHT SHADE, (Square/rectangular) polished, area of Each tile not exceeding 0.36 Sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 20 mm thick screed bed or bedding layer in CM (1:4) complete all as specfied and directed.

M&L for Vitriefied ceramic tiles 8 mm thick LIGHT SHADE(square/rectangular) polished area of Each tiles not exceeding 0.36 Sqm as in vertical surfaces such as dados/skirting etc set and jointed in neat cement slury and in coloured cement to match Coloured on incl plaster (backing coat) 1:4 CM 10 mm thick complete all as specified and directed

M/L for treatment of construction joints and floor cracks by racking the old material, joints filling material, cutting and reparing the joint/surface with high strength eposy resin mortar and dressing the joint to perfact right angle and filling with cold applied high performance and hybrid carban resistance PU joint sealent of thickness 50 mm x 50 mm all as per manufacturer's instructions and entire satisfaction of GE. Make:- FOSROC/CIPY/M/S PIDILITE INDUSTRIES

M&L for Granite (of any type) 20 mm thick work (table rubbed and polished) as in steps, jambs, pilllars, window cill, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of Granite laid over 20mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L 60 mm thick machine pressed precast concrete interlocking paver block and shape and size confirming to IS 15658-2006 of M-35 Grade with grey cement and pigment of red, yellow or any colour complete all as specified and directed.

M & L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for Chequered cement concrete tiles 30 cm x30 cm x25 mm thick, set, jointed and pointed with grey cement and pigment to match over and including 20 mm thick cement screed bed in 1:4 CM complete all as specified and directed

M&L for out door parking Endura tiles 30 cm x 30 cm x 10 mm thick rubber moulded, set, jointed and pointed in neat cement slurry as in floors etc over and including 20mm thick cement screed bed in 1:4 CM complete all as specified and directed.

S & F 5 mm Prelam PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site. on MS frame complete all as specified and as directed.

S & F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing on MS frame complete all as specified and as directed.

M&L for Brick work with sub class ‘B’ brick, straight or curved as plan exc 6m mean radiusbuilt in cement mortar 1:6 complete all as specified and directed.

M&L for Brick work with sub class ‘B’ brick, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

S&F, Aluminium anodised sections for doors/windows/ventilators with one or more rebates including joining cleat for fixing etc complete with frames, shutters and grills of size directed by Engineer-in-charge including handles, tower bolts, grills, etc complete all as specified and directed. Note:- Floor door spring, sheet glass, wire cloth, lock, etc shall be measured and paid seperately.

S & F Anodised aluminium window and ventilator shutters including frames , top hung type type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

Supply and fix aluminium (powder coated ) three track sliding window comprising of one fly proof shutter and two glazed shutters with frames of size 92.0mm x 31.75mm x 1.30mm thick and shutter frames of size 40mm x 18mm x 1.55mm thick with necessary joining cleats, glazing clips, rubber gasket, anodised aluminium snap beading and connected locking arrangement complete all as per manufacturer's catalogue and specifications complete all as specified and directed. (Notes : (i) Glass filling in panels of windows and aluminium wire mesh/wire cloth shall be deemed to be included in the quoted rate for the item; (ii) Aluminium alloy wire cloth in panels of wire gauzed shutter shall be 0.45 mm nominal dia of wire and avg width of aperture 1.40 mm, fixed with aluminium wire staples; (iii) Glass filling in panels of glazed shutter shall be 5 mm thick plain/tinted sheet glass as directed by engineer in charge of approved make and shade/tint(Make of Aluminium Sections powder coated : Jindal or equivalent of JINDAL).

Repairs and refixing of Aluminium doors/windows/ventilators including repairs to hinges,sliding tracks handles, tower bolts, grills, Floor door spring, cleats,beadings,rubbers,locks and repairs of other accesories and make it functional complete all as specified and directed by Engineer-in-charge. (Note : Glass panes,Floor door spring, wire mesh,lock and Aluminium section will be measured and paid under relevant items separately.)

S&F pressed steel door frame 105x60 mm with one or more rebated incl necessary fixing lugs hings, lock strick , etc complete, as specified and directed.

S&F Pressed steel frames for doors ® size 125x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixedas specified and directed.

M&L PCC 1:3:6 type C1 using 20mm graded stone aggregate as in filling of pressed steel door frame complete all as specified and directed.

S & F 40 mm thick flush shutters solid core construction with block board core and plywood face panels, commercial type on both sides decorative face veneer with lipping/frame to match supplied and fitted to chowkats complete all as specified and directed.

S & F 35 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part -I,section 8,clause 8.24 (a) complete all as specified and as directed.fitted to chowkhats for doors etc complete.

S&F PVC door frame size 50mm x 47mm made out of 5mm plain coloured PVC sheet reinf with MS square tube supplying & fixing in opening as per specification complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails . M,S frame shall be covered with heat moulded plain colour PVC ,C, channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails , lock rails and bottom rails on either side and as gap insert for top rail and bottom rail Panelling of plain colour PVC sheet to be fitted in the M.S frame welded /sealed to the stiles & rails with suitable PVC sheet beading , and jointed together with solvent cement , supplying and fising in the frame at site as per specification and drawing.complete all as specified and directed.

S&F, aluminium anodised, barrel tower bolts of extruded section with length of bolt 150 mm and fixed complete all as specified and directed.

S&F, aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy with length of bolt 300 mm and fixed complete all as specified and directed.

S&F 75 mm butt hinges extruded aluminium alloy with galvanised mild steel hinge pin,Type-C-21 complete all as specified and directed.

S&F extruded aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and directed.

S&F extruded aluminium alloy handles, fabricated type, anodised of size 125 mm complete all as specified and directed.

S&F 150mm long floor door stopper of aluminium alloy body and tongue with hard drawn steel springcomplete all as specified and directed.

S&F door closer hydraulically regulated designation No-2 universal type of aluminium body fixed to door frames with screws or by welding complete for door shutters of 850 to 1000mm in width all as specified and directed by Engr-in-charge.

S&F stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple/ wooden beadscomplete all as specified and directed.

S&F in repair 18 mm thick PVC sheet one side prelaminated of approved texture ("celuca ply of Rajshree make) as in Kitchen cabinet. (with shelves and partitions) including necessary fitting & fixture as per manucture's instructions complete all as specified and directed..

S&F Handles of stainless steel 150mm including all connection fitting complete all as specified and directed.

S&F Europa cupboard locks as complete all as specified and directed.

S&F in repair stainless steel hinges of 75mm for cupboards of senso (as per 3D designs zero dgree ) including all connection fitting as complete all as specified and directed and approved by GE.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes,channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed .

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new one complete all as specified and directed.

S&F 3mm thick Sheet glass,ordinary quality and glazing with oil putty ,wooden beadings ,aluminium beadings for windows/doors in square n exc 0.5 sq. m in Each pane complete all as specified

S&F 3mm thick Sheet glass,ordinary quality and glazing with oil putty wooden beadings ,aluminium beadings for windows/doors in square exc 0.5 sq. m in Each pane complete all as specified and directed.

S&F 5.5 mm thick Sheet glass,ordinary quality and glazing with oil putty in aluminium beadings for windows/doors square n exc 0.5 sq. m in Each pane complete all as specified and directed.

S&F 5.5 mm thick Sheet glass,ordinary quality and glazing with oil putty in aluminium beadings for windows/doors square exc 0.5 sq. m in Each pane complete all as specified and directed.

S&F 5.5mm thick Sheet glass,ordinary quality and glazing with Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers fixed with oil putty /wooden/alumiunm beading in square n exc 0.5 sq. m in Each pane complete all as specified and directed.

S&F 4mm thick figured glass, pinn headed type and glazing with oil putty in square n. exc 0.5 Sqm Each panes complete all as specified and directed.

S&F, in repair, double action floor door closer, hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, suitable for aluminium doors and fixed complete all as specified and directed.

S&F in repair door closer hydraulically regulated designation No-2 universal type of aluminium body fixed to door frames with screws or by welding complete for door shutters of 850 to 1000 mm in width all as specified and directed by Engr-in-charge.

M&L for stainless steel pipe 20 mm dia rod fancy type with including fixed in the s/s hooks, and finials/side brackets (both side), shade as approved all as specified.

S&F in repair stainless steel wire cloth 0.50 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple/ wooden beads complete all as specified.

Easing of door shutters for easy closing / opening tightening of hinges or changing the position of hinges adjustment of tower bolts, sliding bolts with new screws etc complete all as specified and directed by Engr-in-charge.

Easing of window shutters, kitchen cupboard shutters, show case shutter drawers incl fixing of screws adjusting handles, knobs tightening piano hinges incl misc small adjustments complete all as specified and directed by Engr-in-charge.

S&F, in repair aluminium anodised, barrel tower bolts of extruded section with length of bolt 200 mm and fixed complete all as specified and directed

S&F, in repair aluminium anodised, barrel tower bolts of extruded section with length of bolt 150 mm and fixed complete all as specified and directed

S&F, in repair aluminium anodised, barrel tower bolts of extruded section with length of bolt 100 mm and fixed complete all as specified and directed

S&F in repair aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy with length of bolt 300 mm and fixed complete all as specified and directed.

S&F in repair 100mm butt hinges extruded aluminium alloy with galvanised mild steel hinge pin,Type-B-21 complete all as specified and directed.

S&F in repair extruded aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and directed.

S&F in repair extruded aluminium alloy handles, fabricated type, anodised of size 125 mm complete all as specified and directed.

S&F in repairs 75 mm long floor door stopper of aluminium alloy body and tongue with hard drawn steel springcomplete all as specified and directed.

S&F in repair aluminium mortice lock,vertical type size 75mm 4 lever complete all as specified and directed

S&F mild steel framed work such as guard bars/grills,grating etc with end of bars shouldered and/or riveted or forged into spikes and similar works including one shop coat of zinc chromate primer complete all as specified.

S&F framed work as in doors or gates of angle or other section with gusset plates ,rails,braces etc complete drilled for fixing of steel gate sheeting or other covering,doors ,etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering ,runing rails and guides ) and hanging also fastning and fixing complete all as specified and directed. confirming to FE-290 ( Gde E-165).

Taking down old steel tubing & connection including cleaning for refixing for 20mm bore pipe complete all as specified

Taking down old steel tubing & connection including cleaning for refixing for 25mm or 32 mm bore pipe complete all as specified

S & F 20 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S & F 25 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Cutting chases in brick walls, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete.

S& F in repairs Stop valve / Angle valve fancy type cast copper alloy chromium plated screwed down high pressure with capstan heads screwed both ends for iron pipe or for union and fixed 15mm bore complete all as specified and directed.

S& F in repairs concealed type cast copper alloy chromium plated screwed down high pressure with capstan heads screwed both ends for iron pipe or for union and fixed 15mm bore complete all as specified and directed.

S& F in repairs 15 mm bore bib tap cast copper alloy, chromium plated, long body fancy type with capstan headed, screwed down, screwed for iron pipe complete all as specified and directed.

S&F in repair for 15mm chromium plated brass WHB mixer fancy type swan neck long nose- screwed down high pressure with or without lettered hot and cold and flynuts 15 mm dia complete all as specified and directed.

S&F in repair 15mm dia pillar tap cast copper alloy chromium plated capstan head screwed down high pressure with or without lettered hot or cold with long screw shank and fly nutt screw for iron pipe complete all as specified and directed.

S&F in repairs fancy type wall mixture of brass, chromium plated, 3 in 1 system with hot and cold arrangement, with provision for overhead shower complete all as specified and directed.

S&F in repair Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall Size 915mmx460mm with bowl size 410mm x330mm x 160mm complete all as specified and directed. .

S&F in repair staniless steel sink 1mm thick without drainage board for kitchen with plug , waste pipe , washers, including cantilever cast iron brackets , connecting union to waste pipe etc, overall size 620mmx510mm with bowl size 560x460x230 mm complete all as specified and directed .

S&F in repair staniless steel sink 1mm thick without drainage board for kitchen with plug , waste pipe , washers, including cantilever cast iron brackets , connecting union to waste pipe etc, overall size 495x420mm with bowl size 410x330x160mm complete all as specified and directed .

S & F Soap dish, stainless steel approx size 160mm x 160mm x 90mm complete all as specified and directed.

M&L for 32 mm bore low density polythelene pipes (LDPE) with fittings of pressure rating 6 Kgsf / Sqcm fixed to walls or in floors etc complete all as specified and directed.

S&F in repair PVC connection 450 mm long, 15mm size with PTMT nuts complete all as specified

S&F in repair PVC connection 600 mm long, 15mm size with PTMT nuts complete all as specified

S&F in repairs 10 ltr PVC valve less symphonic action type flushing cistern, low level white with inlet ball valve float and handle with flush pipe complete all as specified and directed.

S&F in repairs grating doom 125mm dia PTMT with waste hole (Min weight 40 grms) complete all as specified and directed.

S& F in repairs chromium plated shower rose 125 mm size and 15mm dia with or without swivel joints including fixing to pipe and union complete all as specified and directed

S & F in repairs Towel rail 600 mm long and 20 mm dia brass chromium plated D type fixed with screws and wooden or plastic cleats complete all as specified and directed.

S&F, in repair, PVC Bath Cabinet made from hard thermosetting material with mirror, white/ivory colour, 400 x 500mm size. Complete all as specified and directed.

M&L for 100mm dia cast iron floor trap plain with grating including jointing and fixed with cement concrete type B-1 (1:2:4) complete all as specified and directed.

M&L for 75mm diaPTMT multi floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern ),including all fittings,heads,shoes,bends,swan necks etc.including cleaning or refixing or removal to store complete all as specified and directed..

S&F 110 mm dia PVC (SWR ) pipes Single socketed in any length with rubber rings ljoits fixed to walls complete all as specified and as directed.

S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete.

S&F 110 mm dia PVC (SWR ) branches piece,double (double Y) equal or unequal with access doorrubber rings ljoits fixed to walls complete all as specified and as directed.

S&F PVC (SWR) branch pieces, single (equal or un equal) , ordinary or inverted (spigot or socket type) or with parralled branches of 110 mm dia with access door

S&F 110 mm dia PVC (SWR ) bends any radius with access door complete all as specified and as directed.

S&F 75 mm dia PVC (SWR ) bends any radius with access door complete all as specified and as directed.

S&F in repair vitreous China squatting pan of pattern Orissa Pan , size 580 x440 mm white with integral foot rests any pattertn (excl flushing cistern and flush pipe) complete incl provn of lime concrete bedding connection to flush pipe , trap etc & making good complete all as specified and directed..

S&F in repair vitreous china wash down water closet pan Padestal pattern white excluding fixing bolts, flushing cistern and flush pipe with and incl 'P' or 'S' trap and making good to floor to match with existing all as specified and directed.

S&F, in repair PTMT bottle trap ( with internal partition) 32mm bore having minimum water seal of 25mm(Minimum weight 32mm-260 gms complete all as specified and directed.

S& F in repairs Vitreous China wash hand basin, white, flat back, size 550mm x 400mm including brass coupling, mild steel brackets fixed to wall, complete all as specified and directed.

S & F in repairs Vitreous china urinal half stall type ,white including connection to flushing pipe and outgoing pipe complete all as specified and directed.

Supply and fixed PVC waste pipe 32mm bore of size and 900 mm long complete all as specified and directed.

Supply and fixed PVC waste pipe 40mm bore of size and 900 mm long complete all as specified and directed.

Petty reapirs to high / low level flusing cistern by adjusting the float valve, leakage PVC connection PVC / GI bend incl replacing of rubber washer cheek uts plunges etc for any type of flush complete all as specified and directed by Engr-in-charge.

S&F, in repair, jet spray with 1m PVC tube (stainless steel), chromium plated for vitreous china padestal pattern water closet complete all as specified and directed.

S&F, in repair, health faucet with wall hook and 1.0m chrome plated PVC hose pipe complete all as specified and directed.

S&F, in repair, chromium plated, Toilet paper holder complete all as specified and directed.

S&F in repiar CP waste fittings brass chromium plated for sink 32mm dia with long screws sinks and fly nuts , flenge end bedded in red led cement and other in fixed all as specified and directed.

S&F in repiar CP waste fittings brass chromium plated for sink 40mm dia with long screws sinks and fly nuts , flenge end bedded in red led cement and other in fixed all as specified and directed.

S&F in repair Flush pipes to pedestal pan, size including all joints complete all as specified and directed,

S&F in repair Flush pipes to squatt pattern closet including all joints and making good to the floor complete all as specified and directed,

S& F in repairs 15 mm bore Bib tap Elbow action medical pupose cast copper alloy, chromium plated, long body fancy type with capstan headed, screwed down, screwed for iron pipe complete all as specified and directed.

S&F in repair for 15mm chromium plated brass Basin mixer fancy type Elbow action medical pupose- screwed down high pressure with or without lettered hot and cold and flynuts 15 mm dia complete all as specified and directed.

S&F in repair 15mm dia pillar tap Elbow action medical pupose cast copper alloy chromium plated capstan head screwed down high pressure with or without lettered hot or cold with long screw shank and fly nutt screw for iron pipe complete all as specified and directed.

Clearing & removal of blockage, of any type in WC, bathroom, kitchen including floor/nahani traps, soil waste/vent pipes gully trap upto 1st manhole, in any situation by way of cleaning / desludging and removing foreign materials to a distance up to 50 metres to the entire satisfaction of engineer-in-charge.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets including E- Grid frame work complete all as specified and directed.

S&F suspended pre-painted false ceiling ,self design ,self texture,using chicago metallic (Egrid) exposed suspeneded system ,grid section size 600mm x 600 mm comprising of of GI powder coated main runner of dmensions 39 mm x24x8 mm thick (thicknees comprising of GI/0.4 +PPPCGS/0.3 MM & WEIGHT of runner 1.35 kg for 3600 mm length) cross tee of dimension 29 mm x24 mm x0.8 mm and thick wall angle 22.2 mm x22.2 mmx0.65 mm thick(thickness comprising of GI /0.35+PPPCGS/0.3 mm & weight of angle 0.70 kg for 3050 mm length ) with and including 4 mm thick HPSC (high presurre steam cured ) pre-primed ,self embosssed texture designer board ,water resistatnt terminant,fire resistant for insulation and acoustic purpose to be placed in the grid system duly suspended with 4 mm dia GI bar hangers fixed with steel dash through fasterner from purlins of the roof with butterfly clips (wt-0.007 kg/clip) hold down clips (wt-0.0035kg /clip) with provn of light fixture complete all as specified and directed.

Fixing only 4 mm to thick in ceiling flat or sloping Non asbestos cement building boards fixed or laid/inserted to timber/GI/Aluminium frame work fixed with screw as per manufacturer's instructions all as specified and directed

Dismantling of asbestos cement,PVC sheets (corruga ted, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

M&L Pre-painted galvalume aluminium zinc coating GI based corrugatged steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws as specified

M&L Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws as specified

Dismantling timber in scantling 40Sqcm and over in section framed work in any position complete all as specified and directed.

Dismantling wroght iron or mild steel work of any description not oterwise provide for complete all as specified and directed.

S&F hand rails, half rounded or other stock section or core for wooden hand rail straight portion, drilled and counter sunk for balusters, nosing to steps including embeding in concrete and screwing etc wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc; flat iron fillets (for securing wire mesh etc,) including all necessary drilling bolting or riveting, etc and similar work conforming to Fe410-0 or Fe 310-0 complete all as specified and directed.

Fixing only wind ties all as specified and as directed.

S&F rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to a common rafters, fixed with angle cleats or other connecting plates of Gde fe 410-0 or fe 250-0

S&F mild steel screw bolt (machine made) with square or hexagonal head at one end, screwed other, fitted with washer and one hexagonal or square n exc 5cm, long and 5 to 10mm dia complete all as specified and directed.

M&L for Preparation of newly steel surface of any description over 10 cm width or grith and applying two coats of synthetic enamel paint complete all as specified

Roughening surfaces of old concrete floor/terrace by picking incl. taking down existing detoriated / decayed tar felt PCC tiles or any type of treatment including loose surface, scraping with scraper, chiseling, scraping of surface with wire brush or any other method, sweeping clean & washing down with water to remove dust etc. and removing the scraped materials debris to a distance not exc. 50 m complete all as specified and directed.

M&L for wire brushing and cleaning top surface of tiles,lime terracing or cement concrete,including flashing and junction of parapet,etc,and surface painting with a layer of blown bitumen of any penetration applied hot @1.70 Kgs per Sqm.blinded with grit or pea size gravel @ 0.006 cu.m per Sqm and lightly tampered (area of flashing etc.shall be added to the roof area complete all as specified and directed.

M&L for 10 mm thick screed bed or bedding layer in CM 1:3 mixed with water proofing compound @ 3 % by weight of cement on concrete roof surface finished fair and even to maintain the proper slope of roof surface etc complete all as specified and directed.

M&L for Providing water proofing treatment over cleaned roof surface with super thermo APP modified water proofing memberane comprising of the following for roofs-

(a) Cleaning of plastered roof surfaces and applying a coat of bitumen primer @ 0.30 Kgs/Sqm on top of dry surface of finished cement mortar plaster.

(b) One coat of hot blown bitumen of grade 85/25 @ 1.2Kgs /Sqm shall be applied over primed surfaces.

(c) One layer of APP based polymeric water proofing membrane of weight not less than 3 Kgs/Sqm consisting 3mm thick reinforced with polyster non wove fabric shall be unrolled surfaces with lap of 100 mm and the over lap shall be sealed by flame complete all as specified and directed.

(e) Applying two coats of aluminum paint on top of membrane @ 0.10Kgs/Sqm complete all as specified and directed.

M&L for 20mm thick Screed bed or bedding layer of cement mortar 1:4 complete all as specified and directed.

S&F cement concrete tiles size 25cmx25cmx22mm thick machine cut pressed set jointed and pointed in neat cement slurry with grey cement and pigments in floors and cut and polished complete all as specified and directed.

M&L Bitumastic gola, with 80/25 bitumen and coarse sand mixture, 1:3 by weight, 8cmx8cm at the junction of roofing to vertical surfaces complete all as specified and directed.

Cutting grooves in brick wall,75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) in lintels upto 1.5 clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers ,apex stones, bed plates, water troughs and the like including use of formwork (straight or curved) ,including weathering, slightly rounded or chamfered angles and throating, all as specified and as directed (Note :-reinforcement where provided shall be measured and paid seprately)

M & L for 3 cut grinding and 1 cut polishing for old floor kotas tone /marble surafce ,surfaces of any description,width or girth including cleaning and preparing the surface complete all as specified.

M&L for Prepration of old surfaces of walls includinng scrapping down smoke ,soot,and efflorescent salts and treatings oil and gresy spots, brooming down or steel wire brushing removing nails making good holes cracks etc on plastered or unplastered surfaces and applying one coat of white wash on walls complete all as specified.

M&L for Prepration of old surfaces of ceiling includinng scrapping down smoke ,soot,and efflorescent salts and treatings oil and gresy spots, brooming down or steel wire brushing removing nails making good holes cracks etc on plastered or unplastered surfaces and applying one coat of white wash on ceiling surface complete all as specified.

M&L for Prepration of old surfaces of walls includinng scrapping down smoke ,soot,and efflorescent salts and treatings oil and gresy spots, brooming down or steel wire brushing removing nails making good holes cracks etc on plastered or unplastered surfaces and applying one coat of oil bound distemper on wall (white or tinted) complete all as specified.

M&L for Prepration of old surfaces of walls includinng scrapping down smoke ,soot,and efflorescent salts and treatings oil and gresy spots, brooming down or steel wire brushing removing nails making good holes cracks etc on plastered or unplastered surfaces and applying one coat of cement based paint.

M&L for Prepration of old surfaces of walls includinng scrapping down smoke ,soot,and efflorescent salts and treatings oil and gresy spots, brooming down or steel wire brushing removing nails making good holes cracks etc on plastered or unplastered surfaces and applying one coat of exterior emulsion paint anti fungal (Weather coat) on wall ,roof sheet,manglore tiles surfaces of any description complete all as specified.

M&L for Prepration of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint of (white or tinted) complete all as specified.

M&L for Prepration of old painted surfaces of steel of any description not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint all as specified.

MAA SHARDA CONSTRUCTION (BID ID -3389856)

Hemant Associate (BID ID -3388857)

HAFEEZ CONSTRUCTION (BID ID -3389752)

Shri kamal traders (BID ID -3389528)

a k builders (BID ID -3398267)