Replacement of existing LT bare conductor to Arial Bunched cable ABC in rural areas under MVVNL with habitation having population more than 1000 Devipatan Zone Gonda, Balrampur, Bharaich and Shrivasti Districts

Total Schedule No. 1 - Supply of Plants Currency INR (BoQ2)

Total Schedule No. 1 - Supply of Plants Currency USD (BoQ2)

Total Schedule No. 1 - Supply of Plants Currency JPY (BoQ2)

Total Schedule No. 1 - Supply of Plants Currency EUR (BoQ2)

Total Schedule No. 2 - Supply of Plants(Indegenous) (BOQ3)

Total Schedule No. 4A - Incidental Expenses including Inland freight & Insurance to be incurred in Employer’s Country (BOQ4)

Total Schedule No.4C - (INSTALLATION SERVICES ) (BOQ5)

Description of Work / Item(s)

Sch-A1 - 2167 kM of ABC 3X50 mm2 (ph)+1x35 mm2 line on existing poles inc. all clamps, joints, accessories & earthing materials for installation on existing pole, materials for pole numbering (painting) and connection of cable to Dist. Board / LT bushing terminal of Dist. Transformer (DTR) as applicable. (Quantities provided below are indicative and shall be finalized upon survey and detailed cost estimate)

ABC 3X50 mm2 (ph)+1x35 mm2

Anchoring Assembly / Cable Range 25-50 sqmm including I-Hook

Suspension Assembly / Cable Range 25-50 sqmm including I-Hook

Pole clamps

M.S. Earthing Rod 20 x2500 mm with all accessories (for pole earthing)

8 SWG GI wire (for pole earthing)

Insulated piercing connector 25-95 / 25-95 (for main - main connections)

PG Clamp Al/Al 16-95 sqmm

Pre- insulated mid span jointing sleeves - 1 set for above AB cable

Al / Bi-metallic strip (1 set for DTR LT bushing terminals)

Pre-insulated Al lug for 50 sqmm with Al palm & bolts & nuts (for connection to DTR LT bushing or D/Board)

Pre-insulated Al lug for 16 sqmm with Al palm & bolts & nuts

Al Lug for 35 sqmm with Al palm & bolts & nuts (for connection to DTR LT bushing or D/Board)

End caps for above AB Cable

Painting materials for pole numbering per pole

Sch-A2 - 867 kM of ABC 3X95 mm2 (ph)+1x70 mm2 line on existing poles inc. all clamps, joints, accessories & earthing materials for installation on existing pole, materials for pole numbering (painting) and connection of cable to Dist. Board / LT bushing terminal of Dist. Transformer (DTR) as applicable. (Quantities provided below are indicative and shall be finalized upon survey and detailed cost estimate)

ABC 3X95 mm2 (ph)+1x70 mm2

Anchoring Assembly / Cable Range 70-95 sqmm including I-Hook

Suspension Assembly / Cable Range 70-95 sqmm including I-Hook

Pole clamps

M.S. Earthing Rod 20 x2500 mm with all accessories (for pole earthing)

8 SWG GI wire (for pole earthing)

Insulated piercing connector 25-95 / 25-95 (for main - main connections)

PG Clamp Al/Al 10-95 sqmm

Pre- insulated mid span jointing sleeves - 1 set for above AB cable

Al / Bi-metallic strip (1 set for DTR LT bushing terminals)

Pre-insulated Al lug for 95 sqmm with Al palm & bolts & nuts (for connection to DTR LT bushing or D/Board)

Pre-insulated Al lug for 16 sqmm with Al palm & bolts & nuts

Al Lug for 70 sqmm with Al palm & bolts & nuts (for connection to DTR LT bushing or D/Board)

End caps for above AB cable

Painting materials for pole numbering per pole

Sch-A3 - 778 kM of ABC 1X16 mm2 (ph)+1x25 mm2 on existing poles inc. all clamps, joints, accessories & earthing materials for installation on existing pole, materials for pole numbering (painting) and connection of cable to Dist. Board / LT bushing terminal of Dist. Transformer (DTR) as applicable. (Quantities provided below are indicative and shall be finalized upon survey and detailed cost estimate)

ABC 1X16 mm2 (ph)+1x25 mm2

Anchoring Assembly / Cable Range 25-50 sqmm including I-Hook

Suspension Assembly / Cable Range 25-50 sqmm including I-Hook

Pole clamps

M.S. Earthing Rod 20 x2500 mm with all accessories (for pole earthing)

8 SWG GI wire (for pole earthing)

Insulated piercing connector 16-35 / 16-35 (for main - main connections) *

PG Clamp Al/Al 16-95 sqmm

Pre- insulated mid span jointing sleeves - 1 set for above AB cable

Al / Bi-metallic strip (for DTR LT bushing terminals)

Pre-insulated lug for 16 sqmm with Al palm & bolts & nuts (for connection to DTR LT bushing or D/Board)

Al lug for 25 sqmm with Al palm & bolts & nuts (for connection to DTR LT bushing or D/Board)

End caps for above AB cable

Painting materials for pole numbering per pole

Sch-B1 - 63225 No.s of Single phase MS Deep Drawn IP 33 (20 SWG) Distribution Box including all accessories, cables, clamps and connectors for mounting on pole and connection to ABC line (Quantities provided below are indicative and shall be finalized upon survey and detailed cost estimate)

Single phase MS Deep Drawn IP 33 (20 SWG) Distribution Box 1 incoming / 6 outgoing

Mounting accessories for fixing to pole

1x25 sqmm Al/PVC cable

Insulated piercing connector 16-95/4-35 sqmm

PG clamp 16-95 sqmm

Sch-B2 - 5183 Nos of Three phase MS Deep Drawn IP 33 (20 SWG) Distribution Box including all accessories, cables, clamps and connectors for mounting on pole and connection to ABC line (Quantities provided below are indicative and shall be finalized upon survey and detailed cost estimate)

Three phaseMS Deep Drawn IP 33 (20 SWG) Distribution Box 1 incoming / 4 outgoing

Mounting accessories for fixing to pole

1x35 sqmm Al/PVC cable

Insulated piercing connector 16-95/4-35 sqmm

PG clamp 16-95 sqmm

Sch-C1 - Armoured service cable 2Cx4 sqmm including all accessories and GI wire for replacement of 42006 No.s of existing single phase service connection (av. length upto 30 m) (Quantities provided below are indicative and shall be finalized upon survey and detailed cost estimate)

2Cx4 sqmm Al/ PVC armoured cable

All accessories including MS Angle, clamps, clips etc. for connection up to consumer meter board per connection

GI wire, 10 SWG

Sch-C2 - Armoured service cable 4Cx4 sqmm including all accessories and GI wire for replacement of 772 Nos. of existing three phase service connection upto 5 kW (av. length upto 30 m) (Quantities provided below are indicative and shall be finalized upon survey and detailed cost estimate)

4Cx4 sqmm PVC armoured cable

All accessories including MS Angle, clamps, clips etc. for connection up to consumer meter board per connection

GI wire, 8 SWG

Sch-C3 - Armoured service cable 4Cx6 sqmm including all accessories and GI wire for replacement of 86 Nos. of existing three phase service connection above 5 kW (av. length upto 30 m) (Quantities provided below are indicative and shall be finalized upon survey and detailed cost estimate)

4Cx6 sqmm PVC armoured cable

All accessories including MS Angle, clamps, clips etc. for connection up to consumer meter board per connection

GI wire, 8 SWG

Sch-D1/D2 - 13216 No.s of 8.5 m, 180 Kg, PCC Pole including all items for erection (Quantities provided below are indicative and shall be finalized upon survey and detailed cost estimate)

8.5 m, 180 Kg, PCC Pole

RCC Base Pad / Stone Pad (300x300x75mm) for PCC pole

Concreting material for PCC pole foundation (0.268 cum )

Sch-E1 - 5124 Nos. of LT Stay assembly complete with all accessories including guy strain insulator, all hardware fittings and GI wire (Quantities provided below are indicative and shall be finalized upon survey and detailed cost estimate)

LT Stay assembly complete

Guy Strain insulator

Stay Wire 7/10 SWG

Concreting materials (0.2 cum)

Sch-E2 - 569 Nos. of Strut pole with all accessories for installation (Quantities provided below are indicative and shall be finalized upon survey and detailed cost estimate)

Strut Pole : 8m/200 KG. PCC POLE

RCC Base Pad / Stone Pad (300x300x75mm) for PCC pole

Pole clamps and other hardware

Sch-F1- Single Phase Energy Meter with Meter Box and seal as per specification including all accessories.

Description of Work / Item(s)

Amount

Sch-A1 - 2167 kM of ABC 3X50 mm2 (ph)+1x35 mm2 line on existing poles inc. all clamps, joints, accessories & earthing materials for installation on existing pole, materials for pole numbering (painting) and connection of cable to Dist. Board / LT bushing terminal of Dist. Transformer (DTR) as applicable. (Quantities provided below are indicative and shall be finalized upon survey and detailed cost estimate)

ABC 3X50 mm2 (ph)+1x35 mm2

Anchoring Assembly / Cable Range 25-50 sqmm including I-Hook

Suspension Assembly / Cable Range 25-50 sqmm including I-Hook

Pole clamps

M.S. Earthing Rod 20 x2500 mm with all accessories (for pole earthing)

8 SWG GI wire (for pole earthing)

Insulated piercing connector 25-95 / 25-95 (for main - main connections)

PG Clamp Al/Al 16-95 sqmm

Pre- insulated mid span jointing sleeves - 1 set for above AB cable

Al / Bi-metallic strip (1 set for DTR LT bushing terminals)

Pre-insulated Al lug for 50 sqmm with Al palm & bolts & nuts (for connection to DTR LT bushing or D/Board)

Pre-insulated Al lug for 16 sqmm with Al palm & bolts & nuts

Al Lug for 35 sqmm with Al palm & bolts & nuts (for connection to DTR LT bushing or D/Board)

End caps for above AB Cable

Painting materials for pole numbering per pole

Sch-A2 - 867 kM of ABC 3X95 mm2 (ph)+1x70 mm2 line on existing poles inc. all clamps, joints, accessories & earthing materials for installation on existing pole, materials for pole numbering (painting) and connection of cable to Dist. Board / LT bushing terminal of Dist. Transformer (DTR) as applicable. (Quantities provided below are indicative and shall be finalized upon survey and detailed cost estimate)

ABC 3X95 mm2 (ph)+1x70 mm2

Anchoring Assembly / Cable Range 70-95 sqmm including I-Hook

Suspension Assembly / Cable Range 70-95 sqmm including I-Hook

Pole clamps

M.S. Earthing Rod 20 x2500 mm with all accessories (for pole earthing)

8 SWG GI wire (for pole earthing)

Insulated piercing connector 25-95 / 25-95 (for main - main connections)

PG Clamp Al/Al 10-95 sqmm

Pre- insulated mid span jointing sleeves - 1 set for above AB cable

Al / Bi-metallic strip (1 set for DTR LT bushing terminals)

Pre-insulated Al lug for 95 sqmm with Al palm & bolts & nuts (for connection to DTR LT bushing or D/Board)

Pre-insulated Al lug for 16 sqmm with Al palm & bolts & nuts

Al Lug for 70 sqmm with Al palm & bolts & nuts (for connection to DTR LT bushing or D/Board)

End caps for above AB cable

Painting materials for pole numbering per pole

Sch-A3 - 778 kM of ABC 1X16 mm2 (ph)+1x25 mm2 on existing poles inc. all clamps, joints, accessories & earthing materials for installation on existing pole, materials for pole numbering (painting) and connection of cable to Dist. Board / LT bushing terminal of Dist. Transformer (DTR) as applicable. (Quantities provided below are indicative and shall be finalized upon survey and detailed cost estimate)

ABC 1X16 mm2 (ph)+1x25 mm2

Anchoring Assembly / Cable Range 25-50 sqmm including I-Hook

Suspension Assembly / Cable Range 25-50 sqmm including I-Hook

Pole clamps

M.S. Earthing Rod 20 x2500 mm with all accessories (for pole earthing)

8 SWG GI wire (for pole earthing)

Insulated piercing connector 16-35 / 16-35 (for main - main connections) *

PG Clamp Al/Al 16-95 sqmm

Pre- insulated mid span jointing sleeves - 1 set for above AB cable

Al / Bi-metallic strip (for DTR LT bushing terminals)

Pre-insulated lug for 16 sqmm with Al palm & bolts & nuts (for connection to DTR LT bushing or D/Board)

Al lug for 25 sqmm with Al palm & bolts & nuts (for connection to DTR LT bushing or D/Board)

End caps for above AB cable

Painting materials for pole numbering per pole

Sch-B1 - 63225 No.s of Single phase MS Deep Drawn IP 33 (20 SWG) Distribution Box including all accessories, cables, clamps and connectors for mounting on pole and connection to ABC line (Quantities provided below are indicative and shall be finalized upon survey and detailed cost estimate)

Single phase MS Deep Drawn IP 33 (20 SWG) Distribution Box 1 incoming / 6 outgoing

Mounting accessories for fixing to pole

1x25 sqmm Al/PVC cable

Insulated piercing connector 16-95/4-35 sqmm

PG clamp 16-95 sqmm

Sch-B2 - 5183 Nos of Three phase MS Deep Drawn IP 33 (20 SWG) Distribution Box including all accessories, cables, clamps and connectors for mounting on pole and connection to ABC line (Quantities provided below are indicative and shall be finalized upon survey and detailed cost estimate)

Three phaseMS Deep Drawn IP 33 (20 SWG) Distribution Box 1 incoming / 4 outgoing

Mounting accessories for fixing to pole

1x35 sqmm Al/PVC cable

Insulated piercing connector 16-95/4-35 sqmm

PG clamp 16-95 sqmm

Sch-C1 - Armoured service cable 2Cx4 sqmm including all accessories and GI wire for replacement of 42006 No.s of existing single phase service connection (av. length upto 30 m) (Quantities provided below are indicative and shall be finalized upon survey and detailed cost estimate)

2Cx4 sqmm Al/ PVC armoured cable

All accessories including MS Angle, clamps, clips etc. for connection up to consumer meter board per connection

GI wire, 10 SWG

Sch-C2 - Armoured service cable 4Cx4 sqmm including all accessories and GI wire for replacement of 772 Nos. of existing three phase service connection upto 5 kW (av. length upto 30 m) (Quantities provided below are indicative and shall be finalized upon survey and detailed cost estimate)

4Cx4 sqmm PVC armoured cable

All accessories including MS Angle, clamps, clips etc. for connection up to consumer meter board per connection

GI wire, 8 SWG

Sch-C3 - Armoured service cable 4Cx6 sqmm including all accessories and GI wire for replacement of 86 Nos. of existing three phase service connection above 5 kW (av. length upto 30 m) (Quantities provided below are indicative and shall be finalized upon survey and detailed cost estimate)

4Cx6 sqmm PVC armoured cable

All accessories including MS Angle, clamps, clips etc. for connection up to consumer meter board per connection

GI wire, 8 SWG

Sch-D1/D2 - 13216 No.s of 8.5 m, 180 Kg, PCC Pole including all items for erection (Quantities provided below are indicative and shall be finalized upon survey and detailed cost estimate)

8.5 m, 180 Kg, PCC Pole

RCC Base Pad / Stone Pad (300x300x75mm) for PCC pole

Concreting material for PCC pole foundation (0.268 cum )

Sch-E1 - 5124 Nos. of LT Stay assembly complete with all accessories including guy strain insulator, all hardware fittings and GI wire (Quantities provided below are indicative and shall be finalized upon survey and detailed cost estimate)

LT Stay assembly complete

Guy Strain insulator

Stay Wire 7/10 SWG

Concreting materials (0.2 cum)

Sch-E2 - 569 Nos. of Strut pole with all accessories for installation (Quantities provided below are indicative and shall be finalized upon survey and detailed cost estimate)

Strut Pole : 8m/200 KG. PCC POLE

RCC Base Pad / Stone Pad (300x300x75mm) for PCC pole

Pole clamps and other hardware

Sch-F1- Single Phase Energy Meter with Meter Box and seal as per specification including all accessories.

Description of Work / Item(s)

Amount

Sch-A1 - 2167 kM of ABC 3X50 mm2 (ph)+1x35 mm2 line on existing poles inc. all clamps, joints, accessories & earthing materials for installation on existing pole, materials for pole numbering (painting) and connection of cable to Dist. Board / LT bushing terminal of Dist. Transformer (DTR) as applicable. (Quantities provided below are indicative and shall be finalized upon survey and detailed cost estimate)

ABC 3X50 mm2 (ph)+1x35 mm2

Anchoring Assembly / Cable Range 25-50 sqmm including I-Hook

Suspension Assembly / Cable Range 25-50 sqmm including I-Hook

Pole clamps

M.S. Earthing Rod 20 x2500 mm with all accessories (for pole earthing)

8 SWG GI wire (for pole earthing)

Insulated piercing connector 25-95 / 25-95 (for main - main connections)

PG Clamp Al/Al 16-95 sqmm

Pre- insulated mid span jointing sleeves - 1 set for above AB cable

Al / Bi-metallic strip (1 set for DTR LT bushing terminals)

Pre-insulated Al lug for 50 sqmm with Al palm & bolts & nuts (for connection to DTR LT bushing or D/Board)

Pre-insulated Al lug for 16 sqmm with Al palm & bolts & nuts

Al Lug for 35 sqmm with Al palm & bolts & nuts (for connection to DTR LT bushing or D/Board)

End caps for above AB Cable

Painting materials for pole numbering per pole

Sch-A2 - 867 kM of ABC 3X95 mm2 (ph)+1x70 mm2 line on existing poles inc. all clamps, joints, accessories & earthing materials for installation on existing pole, materials for pole numbering (painting) and connection of cable to Dist. Board / LT bushing terminal of Dist. Transformer (DTR) as applicable. (Quantities provided below are indicative and shall be finalized upon survey and detailed cost estimate)

ABC 3X95 mm2 (ph)+1x70 mm2

Anchoring Assembly / Cable Range 70-95 sqmm including I-Hook

Suspension Assembly / Cable Range 70-95 sqmm including I-Hook

Pole clamps

M.S. Earthing Rod 20 x2500 mm with all accessories (for pole earthing)

8 SWG GI wire (for pole earthing)

Insulated piercing connector 25-95 / 25-95 (for main - main connections)

PG Clamp Al/Al 10-95 sqmm

Pre- insulated mid span jointing sleeves - 1 set for above AB cable

Al / Bi-metallic strip (1 set for DTR LT bushing terminals)

Pre-insulated Al lug for 95 sqmm with Al palm & bolts & nuts (for connection to DTR LT bushing or D/Board)

Pre-insulated Al lug for 16 sqmm with Al palm & bolts & nuts

Al Lug for 70 sqmm with Al palm & bolts & nuts (for connection to DTR LT bushing or D/Board)

End caps for above AB cable

Painting materials for pole numbering per pole

Sch-A3 - 778 kM of ABC 1X16 mm2 (ph)+1x25 mm2 on existing poles inc. all clamps, joints, accessories & earthing materials for installation on existing pole, materials for pole numbering (painting) and connection of cable to Dist. Board / LT bushing terminal of Dist. Transformer (DTR) as applicable. (Quantities provided below are indicative and shall be finalized upon survey and detailed cost estimate)

ABC 1X16 mm2 (ph)+1x25 mm2

Anchoring Assembly / Cable Range 25-50 sqmm including I-Hook

Suspension Assembly / Cable Range 25-50 sqmm including I-Hook

Pole clamps

M.S. Earthing Rod 20 x2500 mm with all accessories (for pole earthing)

8 SWG GI wire (for pole earthing)

Insulated piercing connector 16-35 / 16-35 (for main - main connections) *

PG Clamp Al/Al 16-95 sqmm

Pre- insulated mid span jointing sleeves - 1 set for above AB cable

Al / Bi-metallic strip (for DTR LT bushing terminals)

Pre-insulated lug for 16 sqmm with Al palm & bolts & nuts (for connection to DTR LT bushing or D/Board)

Al lug for 25 sqmm with Al palm & bolts & nuts (for connection to DTR LT bushing or D/Board)

End caps for above AB cable

Painting materials for pole numbering per pole

Sch-B1 - 63225 No.s of Single phase MS Deep Drawn IP 33 (20 SWG) Distribution Box including all accessories, cables, clamps and connectors for mounting on pole and connection to ABC line (Quantities provided below are indicative and shall be finalized upon survey and detailed cost estimate)

Single phase MS Deep Drawn IP 33 (20 SWG) Distribution Box 1 incoming / 6 outgoing

Mounting accessories for fixing to pole

1x25 sqmm Al/PVC cable

Insulated piercing connector 16-95/4-35 sqmm

PG clamp 16-95 sqmm

Sch-B2 - 5183 Nos of Three phase MS Deep Drawn IP 33 (20 SWG) Distribution Box including all accessories, cables, clamps and connectors for mounting on pole and connection to ABC line (Quantities provided below are indicative and shall be finalized upon survey and detailed cost estimate)

Three phaseMS Deep Drawn IP 33 (20 SWG) Distribution Box 1 incoming / 4 outgoing

Mounting accessories for fixing to pole

1x35 sqmm Al/PVC cable

Insulated piercing connector 16-95/4-35 sqmm

PG clamp 16-95 sqmm

Sch-C1 - Armoured service cable 2Cx4 sqmm including all accessories and GI wire for replacement of 42006 No.s of existing single phase service connection (av. length upto 30 m) (Quantities provided below are indicative and shall be finalized upon survey and detailed cost estimate)

2Cx4 sqmm Al/ PVC armoured cable

All accessories including MS Angle, clamps, clips etc. for connection up to consumer meter board per connection

GI wire, 10 SWG

Sch-C2 - Armoured service cable 4Cx4 sqmm including all accessories and GI wire for replacement of 772 Nos. of existing three phase service connection upto 5 kW (av. length upto 30 m) (Quantities provided below are indicative and shall be finalized upon survey and detailed cost estimate)

4Cx4 sqmm PVC armoured cable

All accessories including MS Angle, clamps, clips etc. for connection up to consumer meter board per connection

GI wire, 8 SWG

Sch-C3 - Armoured service cable 4Cx6 sqmm including all accessories and GI wire for replacement of 86 Nos. of existing three phase service connection above 5 kW (av. length upto 30 m) (Quantities provided below are indicative and shall be finalized upon survey and detailed cost estimate)

4Cx6 sqmm PVC armoured cable

All accessories including MS Angle, clamps, clips etc. for connection up to consumer meter board per connection

GI wire, 8 SWG

Sch-D1/D2 - 13216 No.s of 8.5 m, 180 Kg, PCC Pole including all items for erection (Quantities provided below are indicative and shall be finalized upon survey and detailed cost estimate)

8.5 m, 180 Kg, PCC Pole

RCC Base Pad / Stone Pad (300x300x75mm) for PCC pole

Concreting material for PCC pole foundation (0.268 cum )

Sch-E1 - 5124 Nos. of LT Stay assembly complete with all accessories including guy strain insulator, all hardware fittings and GI wire (Quantities provided below are indicative and shall be finalized upon survey and detailed cost estimate)

LT Stay assembly complete

Guy Strain insulator

Stay Wire 7/10 SWG

Concreting materials (0.2 cum)

Sch-E2 - 569 Nos. of Strut pole with all accessories for installation (Quantities provided below are indicative and shall be finalized upon survey and detailed cost estimate)

Strut Pole : 8m/200 KG. PCC POLE

RCC Base Pad / Stone Pad (300x300x75mm) for PCC pole

Pole clamps and other hardware

Sch-F1- Single Phase Energy Meter with Meter Box and seal as per specification including all accessories.

Additional (Optional) type or other tests to be conducted at the request of Employer : Bending test for ABC as per IS 14255

Description of Work / Item(s)

Amount

Sch-A1 - Installation of 2167 kM of ABC 3X50 mm2 (ph)+1x35 mm2 line on existing poles including all accessories and works Quantities provided below are indicative and shall be finalized upon survey and detailed cost estimate

Stringing of ABC 3X50 mm2 (ph)+1x35 mm2 line on existing poles as per specification and drawings including installation of all accessories as required including Anchoring / Suspension assemblies, mid span jointing, jumpering, insulated piercing connectors, end caps etc. and connection of line to DTR distribution boxes / bushing terminals as required and complete in all respect.

Earthing of poles as per specifications and drawings including installation of MS earthing rod of 20x2500 mm with all accessories and GI earthing wire

Numbering of poles by painting

Dismantling of existing 1/2/3 phase bare conductor LT line conductors & accessories (excluding poles/ stays) and returning to DISCOM warehouse *

Sch-A2 - Installation of 867 kM of ABC 3X95 mm2 (ph)+1x70 mm2 line on existing poles including all accessories and works Quantities provided below are indicative and shall be finalized upon survey and detailed cost estimate

Stringing of ABC 3X95 mm2 (ph)+1x70 mm2 line on existing poles as per specification and drawings including installation of all accessories as required including Anchoring / Suspension assemblies, mid span jointing, jumpering, insulated piercing connectors, end caps etc. and connection of line to DTR distribution boxes / bushing terminals as required and complete in all respect.

Earthing of poles as per specifications and drawings including installation of MS earthing rod of 20x2500 mm with all accessories and GI earthing wire

Numbering of poles by painting

Dismantling of existing 1/2/3 phase bare conductor LT line conductors & accessories (excluding poles/ stays) and returning to DISCOM warehouse *

Sch-A3 - Installation of 778 kM of ABC 1X16 mm2 (ph)+1x25 mm2 line on existing poles including all accessories and works Quantities provided below are indicative and shall be finalized upon survey and detailed cost estimate

Stringing of ABC 1X16 mm2 (ph)+1x25 mm2 line on existing poles as per specification and drawings including installation of all accessories as required including Anchoring / Suspension assemblies, mid span jointing, jumpering, insulated piercing connectors, end caps etc. and connection of line to DTR distribution boxes / bushing terminals as required and complete in all respect.

Earthing of poles as per specifications and drawings including installation of MS earthing rod of 20x2500 mm with all accessories and GI earthing wire

Numbering of poles by painting

Dismantling of existing 1/2/3 phase bare conductor LT line conductors & accessories (excluding poles/ stays) and returning to DISCOM warehouse *

Sch-B1 - Installation of 63225 Nos. of single phase Deep Drawn Type Distribution Box on pole Quantities provided below are indicative and shall be finalized upon survey and detailed cost estimate

Installation of single phase Deep Drawn Type Distribution Box, 1 incoming / 6 outgoing on pole, connection to ABC line using Al/XLPE Unarmoured cable, IPC and PG clamp and re-connection of existing service cables (if not to be replaced)

Sch-B2 - Installation of 5183 Nos. of three phase Deep Drawn Type Distribution Box on pole Quantities provided below are indicative and shall be finalized upon survey and detailed cost estimate

Installation of three phase Deep Drawn Type Distribution Box 1 incoming / 4 outgoing on pole, connection to ABC line using Al/XLPE Unarmoured cable, IPC and PG clamp and re-connection of existing service cables (if not to be replaced)

Sch-C1 - Replacement of 42006 Nos. of existing single phase service connection with 2Cx4 sqmm armoured service cable Quantities provided below are indicative and shall be finalized upon survey and detailed cost estimate

Replacement of existing single phase service connection with 2Cx4 sqmm Al/ PVC armoured service cable as per specifications and drawings including installation of all accessories and GI wire (average length upto 30 m)

Sch-C2 - Replacement of 772 No.s of existing three phase service connection (upto 5 kW) with 4Cx4 sqmm armoured service cable Quantities provided below are indicative and shall be finalized upon survey and detailed cost estimate

Replacement of existing three phase service connection (upto 5 kW) with 4Cx4 sqmm armoured service cable as per specifications and drawings including installation of all accessories and GI wire (average length upto 30 m)

Sch-C3 - Replacement of existing 86 No.s of three phase service connections (above 5 kW) with 4Cx6 sqmm armoured service cable Quantities provided below are indicative and shall be finalized upon survey and detailed cost estimate

Replacement of existing three phase service connection (above 5 kW) with 4Cx6 sqmm armoured service cable as per specifications and drawings including installation of all accessories and GI wire (average length upto 30 m)

Sch-D1 - Erection of 12645 No.s of 8.5 m, 180 Kg, PCC Pole Quantities provided below are indicative and shall be finalized upon survey and detailed cost estimate

Erection of 8.5 m, 180 Kg, PCC Pole including excavation of pits in all type of soil, stone pad and concreting as per technical specifications & drawings

Sch-D2 - Replacement of existing 571 No.s of unusable pole with new 8.5 m, 180 Kg, PCC Pole Quantities provided below are indicative and shall be finalized upon survey and detailed cost estimate

Removal of existing unusable pole

Erection of 8.5 m, 180 Kg, PCC Pole including excavation of pits in all type of soil, stone pad and concreting as per technical specifications & drawings

Sch-E1 - Erection of 5124 Nos. of LT Stay assembly Quantities provided below are indicative and shall be finalized upon survey and detailed cost estimate

Erection of complete Stay Set with GI stay wire including excavation of stay pit in all type of soil, concreting, installation of all accessories including stay assembly, guy strain insulator complete as per technical specification and approved drawings.

Erection of Strut pole with all accessories Quantities provided below are indicative and shall be finalized upon survey and detailed cost estimate

Erection of Strut Pole : 8m/200 KG. PCC POLE including excavation of pits in all type of soil, stone pad, concreting, clamps and other hardware complete as per technical specification and approved drawings.

Sch-F1 - Replacement of 42864 No.s of Single Phase Energy Meter with meter box and seal , as per specification including all accessories, with due approval of the employer Quantities provided below are indicative and shall be finalized upon survey and detailed cost estimate

Replacement of Single Phase Energy Meter with meter box and seal as per specification with installation of all accessories including fixing, service cable connection, provision of earth point, sealing and meter reading records, complete in all aspects.

Transrail Lighting Limited

TATA Projects Limited

Bajaj Electricals Limited Mumbai

Bajaj Electricals Limited Mumbai

NCC LIMITED

TATA Projects Limited

Transrail Lighting Limited

TATA Projects Limited

Bajaj Electricals Limited Mumbai

TATA Projects Limited

Bajaj Electricals Limited Mumbai

Transrail Lighting Limited

TATA Projects Limited

NCC LIMITED

Bajaj Electricals Limited Mumbai

US Dollar

European Euro

Japanese yen

US Dollar

European Euro

Japanese yen

US Dollar

US Dollar

US Dollar

Japanese yen

Japanese yen

Japanese yen

European Euro

European Euro

European Euro

US Dollar

European Euro

Japanese yen

US Dollar

European Euro

Japanese yen

Description of Work / Item(s)

Anchoring Assembly / Cable Range 25-50 sqmm including I-Hook

Suspension Assembly / Cable Range 25-50 sqmm including I-Hook

Pole clamps

M.S. Earthing Rod 20 x2500 mm with all accessories (for pole earthing)

8 SWG GI wire (for pole earthing)

Insulated piercing connector 25-95 / 25-95 (for main - main connections)

PG Clamp Al/Al 16-95 sqmm

Pre- insulated mid span jointing sleeves - 1 set for above AB cable

Al / Bi-metallic strip (1 set for DTR LT bushing terminals)

Pre-insulated Al lug for 50 sqmm with Al palm & bolts & nuts (for connection to DTR LT bushing or D/Board)

Pre-insulated Al lug for 16 sqmm with Al palm & bolts & nuts

Al Lug for 35 sqmm with Al palm & bolts & nuts (for connection to DTR LT bushing or D/Board)

End caps for above AB Cable

Painting materials for pole numbering per pole

ABC 3X95 mm2 (ph)+1x70 mm2

Anchoring Assembly / Cable Range 70-95 sqmm including I-Hook

Suspension Assembly / Cable Range 70-95 sqmm including I-Hook

PG Clamp Al/Al 10-95 sqmm

Pre- insulated mid span jointing sleeves - 1 set for above AB cable

Pre-insulated Al lug for 95 sqmm with Al palm & bolts & nuts (for connection to DTR LT bushing or D/Board)

Al Lug for 70 sqmm with Al palm & bolts & nuts (for connection to DTR LT bushing or D/Board)

End caps for above AB cable

ABC 1X16 mm2 (ph)+1x25 mm2

Insulated piercing connector 16-35 / 16-35 (for main - main connections) *

Pre- insulated mid span jointing sleeves - 1 set for above AB cable

Al lug for 25 sqmm with Al palm & bolts & nuts (for connection to DTR LT bushing or D/Board)

End caps for above AB cable

Single phase MS Deep Drawn IP 33 (20 SWG) Distribution Box 1 incoming / 6 outgoing

Mounting accessories for fixing to pole

1x25 sqmm Al/PVC cable

Insulated piercing connector 16-95/4-35 sqmm

Three phaseMS Deep Drawn IP 33 (20 SWG) Distribution Box 1 incoming / 4 outgoing

Mounting accessories for fixing to pole

1x35 sqmm Al/PVC cable

2Cx4 sqmm Al/ PVC armoured cable

All accessories including MS Angle, clamps, clips etc. for connection up to consumer meter board per connection

GI wire, 10 SWG

4Cx4 sqmm PVC armoured cable

All accessories including MS Angle, clamps, clips etc. for connection up to consumer meter board per connection

4Cx6 sqmm PVC armoured cable

8.5 m, 180 Kg, PCC Pole

RCC Base Pad / Stone Pad (300x300x75mm) for PCC pole

Concreting material for PCC pole foundation (0.268 cum )

LT Stay assembly complete

Guy Strain insulator

Stay Wire 7/10 SWG

Strut Pole : 8m/200 KG. PCC POLE