Providing EI work for construction of Chemical Waste bottles / containers etc. in CHINTAN premises at IIT Delhi

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.quired. (Make of Wire: Havells/ Finolex/ Polycab)

Group-C

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel conduit/ FRPVC Trunking as required. (Make of Wire: Havells/ Finolex/ Polycab)

3 x 2.5 sq. mm

6 x 4 sq. mm

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. (Make: Legrand/ Havells/ L&T/ Wipro North West/ Schneider/Anchor)

5/6 A Switch

15/16 A Switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required. (Make: Legrand/ Havells/ L&T/ Wipro North West/ Schneider/Anchor)

150 mm X 75 mm X 60 mm deep

200 mm X 125 mm X 60 mm deep

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. (Make: Legrand/ Havells / L&T/ Wipro North West/ Schneider/Anchor)

Supply and installation of surface mounting LED batten luminaire equipped with CRCA powder coating housing, anti glare polycarbonate diffuser with energy efficient electronic driver with following features:- Suitaible for operating voltage and frequency: 130-300 V AC, 50 Hz; wattage not more then 20 Watts, Output lumens not less then 1800lm; CCT not less then 6500K; Length 4 feet; Normal surge protection 2.5kV; Powe factor not less then 0.9; Minimum IP protection 20. (Make: Philips/Wipro/Havells/Panasonic/Bajaj/Crompton/Osram)

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (matter: AC / Normal / Emergency Power) etc. as required . (Make: L &T / Schneider / Legrand / Havells)

8 way , Double door

Supplying and fixing of following rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (matter: AC / Normal / Emergency Power) etc. as required . (Make: L &T / Schneider / Legrand / Havells)

Single Pole, 10A

Single Pole, 16A

Single Pole, 25A

Single Pole, 32A

Supplying and fixing following rating, double pole, 240 V, MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required. (Make: L &T / Schneider / Legrand / Havells)

Supplying and fixing 63A rating, TP/Four Pole, 415 V, isolator/MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required. (Make: L &T / Schneider / Legrand / Havells)

Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V "C" curve DP MCB complete with connections, testing and commissioning etc. as required. (Make: L &T / Schneider / Legrand / Havells)

Supplying and fixing TP sheet steel enclosure on surface/ recess along with 16/25/32 A 415 V "C" curve TP MCB complete with connections, testing and commissioning etc. as required.

Supplying and fixing Cable End Box (Loose Wire Box) suitable for 8 way, Double door SPN MCBDB , 240 Volts, on surface/ recess, complete with testing and commissioning etc. as required.. (Make: L &T / Schneider / Legrand / Havells)

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Supplying and Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of 3 x 10 sq. mm size direct in ground as required. (Make: Havells/ Skytone/ Gloster/ NICCO)

Supplying and Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of 3 x 10 sq. mm size on cable tray/ open duct/ wall as required. (Make: Havells/ Skytone/ Gloster/ NICCO)

Supplying and Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of 3 x 10 sq. mm size by bukki(trench less) for road crossing as required. (Make: Havells/ Skytone/ Gloster/ NICCO)

Supplying and making end termination with brass compression gland and aluminium lugs fo 3 X 10 sq. mm (22mm)size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

Supplying and Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of 3 x 4 sq. mm size on cable tray/ open duct/ wall as required. (Make: Havells/ Skytone/ Gloster/ NICCO)

Supplying, Installation, testing & commissioning of energy efficient LED compound light equipped with power coated PDC alluminium body & secondry optical lens for superior light distribution with energy efficient electronic driver with following features:- 130-300 Vac, 50Hz, wattage not more then 30 Watts, efficancy not less then 110 Lm/W, CCT 5700K, Nominal surge protection 2.5 kV, Power factor not less then 0.9, Minimum IP protection 66 etc. in suitable size GI pipe with reducer, GI saddle, bracket for proper fixing as required. (Make: Panasonic/Philips/Bajaj)

Supplying and fixing of 40 mm dia medium G.I. pipe of 1.5 meter long L type on surface of wall fitted with GI/MS bracket with reducer etc. complete as required.

Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.

SUPER MOTOR WINDING & REFRIGERATION WORK