REPAIRS REPLACEMENT OF INTERNAL PLUMBING SANITARY FITTINGS FLOORING AND JOINERY WORKS SUNKEN SLABS AND OTHER RELATED WORKS FOR VARIOUS BLDGS OF D TYPE DS D SPECIAL E TYPE AND DIRECTOR ENCLAVE SCOOTER CYCLE GARAGES UNDER AGE B R II OF DRDO COMPLEX

Taking down chowkats or frames without taking off shutter from the frame n.exc 1.50 Sqm each complete all as specified and directed.

Taking down chowkats or frames without taking off shutter exc 1.50 Sqm but n.exc 4 Sqm each. complete all as specified and directed.

Taking down Shutters of any description exc 1 sq. m and n exc 2 sq. m each

S&F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes, as per specifications and drawing complete or as directed by Engineer-In-Charge.

S&F factory made solid PVC door shutter 30mm thick(style) consisting of frame made out of MS tubes for bottom and top rails. MS frame shall be covered heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail& bottom rail on either side & as gap insert for top rail & bottom rail; Panelling for plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling and fixing in the frame at the site as per specification.

Repair/Rescuring, easing and adjusting wooden door shutter of any description without taking off shutter from the frame, area of shutter exceeding 1.00 Sqm but not exceeding 2.00 Sqm each, including making good the disturbed area as per existing, complete all as specified and directed.

Repairs to steel window/ventilator/shutter of any description including replacement of handle of any pattern, peg stay etc to make window/ventilator absolutely in working condition including necessary welding area note exc 0.50 Sqm each including re-securing or easing and adjusting all as specified and as directed by Engineer-in-Charge.

S & F pressed steel frames of size 105 x 60mm x 1.25 mm thick for door with one or more rebates, including necessary fixing lugs, hinges lock strike plate etc complete all as specified and as directed.

S & F pressed steel frames of size 125 x 60mm x 1.25 mm thick for door with one or more rebates, including necessary fixing lugs, hinges lock strike plate etc complete all as specified and as directed.

M & L PCC 1:3:6 type C0 (using 12.5mm graded stone aggregated) as in filling in the chowkats/frames complete all as specified and as directed.

S & F 35 mm thick factory made plain framed panelled shutters(two panel) with IInd class hardwood rail and style with lock rail and panel of 12 mm BWP commercial ply with commercial vaneer on both faces. The size of rail and style as per IS - 1003 Part - I , kiln seasoned and chemically pressure treatedcomplete all as specified and as directed.

S & F 35mm thick IInd class hardwood glazed and skeleton shutters open rebated and prepared to receive gauge (without sash bars)edges of framing plain, chamfered or round fitted with cut and mitred beads for securing wire gauge sizes of members as specified in SSR Part-I section 8 clase 8.24(a) of shutters all as specified and as directed.

Taking down boards of any description and any size as in shelves complete all as specified and directed.

18/19mm thick one side prelaminated particle board, interior grade, with decorative choice laminate and fixed with screws to steel/timber frame work etc complete all as specified and directed

S & F 18/ 19 Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one side and other side balancing white face ; fixed with screws to timber frame work all as specified and directed

S & F teak wood beading of size 20 mm x 6 mm on the exposed/edges surfaces of the particle board complete all as specified and as directed

S & F in repair fancy type stainless steel handle of size 100 mm long complete all as specified and as directed

S&F in repair 40mm dia, cupboard knobs fixed with nut, screw & washer of mild steel, bright finished

Supply and fix in repairs, Stainless steel soft close hinges, suitable for modular kitchen complete all as specified and as directed. (Make : Godrej or techno commercial equivalent)

Taking down steel window with frame without taking off shutter (double leaf /triple leaf shutter with frame ie. fly-proof and glazed) from the frame n.exc 0.60 Sqm each including glass panes. mosquito proof mesh excluding grill all as specified and directed.

Taking down steel window with frame without taking off shutter (double/trible leaf double shutter with frame ie. glazed and fly-proof )from the frame exc 0.60 Sqm and not exc 3 sqm each including glass panes. mosquito proof mesh excluding all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F Framed works such as grills, gratings, etc and hung as gates including pintle hinges,stops hand made sliding bolts etc with end bars shouldered and /or riveted, or forged into spikes,framed guard bars, barred iron doors, ladders,framed balusters,walk ways,railings,frame work of water tanks and similar work con-forming to Fe-290 Gde -E-165 complete all as specified and as directed.

M&L Fe-410W(Grade E-250) framed work such as steel gates, door including pintol hinges , stops hand made sliding bolt s etc, complete all as specified and directed.

M&L Mild steel plain black 1.60mm thick sheet in steel gates and similar work , cut to size, fixed to steel framing gates with plain 40mm lap joint with welded or riveted all as directed.

Hacking out old broken glass (any thicknesss, size,quality or description) from metal frame inlcuding punching or drilling out old glazing pins/spring clips

S & F 4mm thick sheet glass ordinary quality and glazing with oil putty, or beading and necessary clips as squares n exc. 0.5 Sqm in each pane complete all as specified and directed.

S & F 4mm thick pin head glass and glazing with oil putty, or beading and necessary clips as square n exc. 0.5 Sqm in each pane complete all as specified and directed.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repairs Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples fixed in repair complete all as specified and directed.

M & L for applying two coats of synthetic enamel paint over a coat of pink primer including preparation of previously untreated or new wooden surfaces exc 10 cm in width or girth complete all as specified and as directed.

M&L two coats of synthetic enamel paint over a coat of zinc chrome primer on new steel surfaces of any description over 10 cm width or girth including preparation of surfaces all as specified and as directed..

S & F Aluminium anodised barrel tower bolts of extruded section, 150 mm long all as specified and as directed.

S & F Aluminium anodised cast type handles 150mm long all as specified and as directed.

S&F in repairs stainless steel butt hinges medium weight of size 100 mm complete all as specified and directed.

S & F aluminium alloy, anodised, sliding door bolt with hasp, staple bolt type and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections 300 mm long all as specified and as directed.

S & F door stopper of rubber and aluminium alloy body, 150 mm size fixed all as specified and as directed.

S & F in repair door stopper of rubber and aluminium alloy body, 150 mm size fixed all as specified and as directed.

S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flaps (When open) 30 mm

S&F in repair Single action spring hinges, mild steel with steel wire spring, stove enameled black, 100mm size including necessary welding fixed in repair to steel door frame complete all as specified and directed.

S & F in repairs magnetic ball catches of standard type fixed complete all as specified and as directed

Demolition of brick work or stone/boulder PCC black masonry, built in cement mortar etc and removing debris outside MD Land complete all as specified.

M&L precast cement concrete block masonry with solid block in1:3:6 mix, type C1 ( using 20mm graded stone aggregate ), exc 10cm in width and setting in cement mortar 1:6 complete all as specified and directed.

M&L Brick work with sub class 'B' bricks built in CM (1:4) straight or curved on plan exc 6 m mean radius etc complete all as specified and directed.

Taking down cement plastering of any thickness on brick, concrete or stone walls, partitions, ceilings etc including raking out joints, hacking for key, scrubbing down with water etc, removal of rubbish off the premises.

M&L for 5mm thick rendering on ceilings in cement mortar 1:3 and finishing the surface with even and smooth without using extra cement all as specified and as directed.

M&L for 10mm thick rendering on brick or concrete surface in cement mortar 1:6 and finishing the surface with even and smooth without using extra cement all as specified and as directed.

Preparing the newly plastered surfaces of walls and applying two coat of oil bound distemper over a coat of alkali reistant primer over 1.00mm thick wall care putty complete all as specified and directed.

Preparing the newly plastered surfaces of ceilings and applying two coats of oil bound distemper over alkali-resistant primer and 1.00mm thick wall putty complete all as specified and directed.

Material and Labour for Preparation of newly plastered sufaces and applying two or more coats of 100 % Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV Resistance as per IS 15489:2004 Alkali & fungal resistance,dirt resistance exterior paint of required shade ( Company Deport Tinted ) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.9 litre/ 10 Sqm complete all as specified and as directed

Taking down steel water tubing 15mm dia bore and connection concealed / fixed on wall under floor and removed from site all as specified and as directed. (Note (i) Taking down stop cock , bib taps and concealed tubing shall be measured and paid separately (ii) Cutting chases and making good will be measured and paid separately

S&F for GI water tubing surface/concealed, 15mm bore, medium grade galvanized with all fittings (such as tee, elbow, socket, union, short pieces) and complete all as specified and directed. Note : i) Taps, valves if any shall be removed before taking down pipe. ii) Cutting chases and making good shall be measured and paid separately

Taking down steel water tubing 20mm dia bore and connection concealed / fixed on wall under floor and removed from site all as specified and as directed. (Note (i) Taking down stop cock , bib taps and concealed tubing shall be measured and paid separately (ii) Cutting chases and making good will be measured and paid separately

S&F for GI water tubing surface/concealed, 20mm bore, medium grade galvanized with all fittings (such as tee, elbow, socket, union, short pieces) and complete all as specified and directed. Note : i) Taps, valves if any shall be removed before taking down pipe. ii) Cutting chases and making good shall be measured and paid separately

Refixing 20mm bore water tubing on surface/concealed in same/new location after cleaning and application of bituminous paint on concealed portion of tubing including cutting & threading pipe and provision of additional fittings such as socket, tee, elbow, union (if required) complete all as specified and directed. Note : i) Taps, valves if any shall be removed before taking down pipe. ii) Cutting chases and making good shall be measured and paid separately

Cutting chases, pinning in, making good for brick walls to facing where required and pointing in cement mortor 1:3 to ends or edges of concealed water tubing and similar work including making good cutting not exc 10CM girth.complete all as specified and directed.

Supply and fix in repair, Chromium plated Wall mixer with bend pipe for overhead shower with built-in non return valve with CP wall flanges, fixed in repair complete all as specified and directed by GE Make : Cat part No F2006402 of Jaquar or techno-commercial equivalent model in other specified makes as approved by GE

S & F in repair 15 mm CP cast copper alloy bib taps fancy type screwed down, screwed for iron pipe or for brass ferrule including taking down old bib taps complete all as specified and as directed.

S & F in repair fancy type chromium plated 2 way bib tap 15mm dia with CP flange as all as specified and as directed.

S & F 15 mm pillar taps, cast copper alloy fancy type , chromium plated screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe including taking down old pillar taps complete all as specified and as directed.

S & F in repairs CP fancy type angle cock, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

M & L Gun metal Gate valves 20 mm dia with iron wheel head, screwed both ends for iron pipe and fixed including cutting the old pipes as in repair complete all as specified and directed

Supply and fix in repair chromium plated overhead shower rose 125mm dia with swivel joints with and including overhead shower arm 230mm with wall flange , complete all as specified and directed by GE.

S & F in repair Chromium plated fancy type brass soap dish with wall hook complete all as specified and as directed.

Supply and fix in repair Stainless steel toilet paper holder with flap guard, fixed to wall with CP brass screws and PVC cleat, complete all as specified and directed by GE.

S&F in repair CP towel rail 600mm dia fixed with chromium plated screw and PVC cleat fixed in repair etc complete all as specified and directed.

S&F in repair Hand shower (Health Faucet) with 8mm dia, 1.2m long flexible tube in chrome finish and wall hook with NRV (Back flow preventer) fixed in position to wall, fixed in repair complete all as specified and directed by GE

Supply and fixed in repair single towel rail brass chromium plated 600mm long fixed with chromium plated screw and PVC cleat etc complete all as specified and directed.

S & F in repair PVC connecting pipe 600mm long 15 mm dia both end having brass coupling nut and PVC washer all as specified and as directed.

S&F Vitreous china white wash down water closet pan (pedestal pattern) with PP soft closing seat cover, hinges, fixing accessories set (excluding flushing cistern and flush pipe), including UPVC (SWR) ‘P’ or ‘S’ trap and connection to drain (or outgoing pipe) and to flush pipe, antisyphonic pipe fixed in repair including dismantling existing water closet etc complete all as specified and directed by GE”

S&F Vitreous china White Squatting Orissa Pattern pan of size 580x440mm, including UPVC ‘P’ or ‘S’ trap, front or back inlet and integral foot rests and making connection to trap and to flushing pipe, anti syphonic pipe, fixed in repair including dismantling existing squatting pan and making good to disturbed floor, complete all as specified and directed. Make : Cat part No CALINA S3010102 of CERA or techno-commercial equivalent model in other makes as approved

S&F in repairs 10 ltrs capacity (PVC), valve less, syphonic action type, fluhsing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed.

S& F Vitreous China wash basin, white, flat back, size 550x400mm excluding waste, chain and plug and porcelain stopper but including brackets, including Waste coupling of PTMT(half or full threaded) (Minimumweight 32mm-45gms/40mm-60 gms) with 32mm bore PVC waste pipe minimum 800mm long with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed in repairs complete all as specified and as directed.

S & F in repair stainless steel sink with draining board, made out of 1.00 mm thick sheet for kitchen with plugs, waste pipe and washer’s including cast iron cantilever brackets, connecting union etc over all size 915 mm x 460 mm with bowl size 410 x 330 x 160 mm including taking down old steel sink all as specified and as directed.

S&F in repairs stainless steel plate rack of 0.63mm thick sheet, size 600mm x800mm complete all as specified and as directed.

S & F rotational moulded polyethylene water storage tanks three layered (cylindrical, vertical with closed top ) hoisted and fixed in position of 1000 Ltrs capacity including taking down old one all as specified and as directed.

S & F 750 Ltrs capacity rotational moulded polytheline water storage tanks three layered (Cylindrical vertical with closed top) hoisted and fixed in position including dismentling of unserviceable tank

S & F 500 Ltrs capacity rotational moulded polytheline water storage tanks three layered (Cylindrical vertical with closed top) hoisted and fixed in position including dismentling of unserviceable tank

Uprooting scrubs/plant/flora & fauna on wall girth not exceeding 100mm from brick wall by cutting holes into masonry/walls for digging out roots and dosing Sulfuric/Phenolic Acid as per manufacturer's instruction to burn deep rooted tree roots and making good the disturbed area with cement mortar in CM 1:3 using water proofing compound including necessary scaffolding upto a height of 16 metre complete all as specified and directed.

S&F in repair Corner glass self assembly consisting of 5.5mm thick sheet glass self 25cm wide with chromium plated bracket guard and fixed with CP screws and wood cleats with wall complete all as specified and directed.

S&F in repair glass self assembly consisting of 5.5mm thick sheet glass self 12cm wide with chromium plated bracket guard and rail 60cm long and fixed with CP screws and wood cleats with wall complete all as specified and directed.

S & F (SWR) UPVC pipes 110 mm dia single socketed in any length with solvent cement joints laid under floor or on walls fixed as soil waste/vent pipes including taking up or down existing PVC pipes and connections complete all as specified and as directed..

S & F (SWR) UPVC pipes 75mm dia single socketed in any length with solvent cement joints laid under floor or on walls fixed as soil waste/vent pipes including taking up or down existing PVC pipes and connections complete all as specified and as directed..

Supply and fix in repair PVC waste pipe 32mm bore not less than 800mm long complete all as specified and direceted

Supply and fix in repair 100mm dia CP grating usnig white cement complete all as specified and direceted

S&F in repair PVC floor trap/Nanhi Trap with plain/single hole CP grating including jointing to waste pipe in cement joint, of outlet 75 mm.dia .

S & F 75mm dia outlet PVC multi floor trap with CP grating including dismantling the damaged trap all as specified and as directed.

S & F PVC (SWR) bends any radius 75 mm dia of bore, including taking down old bends all as specified and as directed.

S & F PVC (SWR) branch piece single (single T)equal of bore 75 mm dia with access door in repairs all as specified and as directed

S & F PVC (SWR) branch piece single (single T) equal or unequal of bore 110 mm dia, with access door in repairs all as specified and as directed

S & F PVC (SWR) vent cowl of bore 110 mm dia, including taking down old PVC vent cowl all as specified and as directed.

Demolition of cement concrete in ground floor and paving n exc 15cm below or above ground level removing debris outside MD land complete all as specified.

M&L 75mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base of paving/plinth, Hard standing, plinth protection etc

M&L 25 mm thick PCC 1 : 2 : 4 type B0 (using 12.50 mm graded stone aggregate) as floor rough to receive tile screed/bedding layer complete all as specified and directed

M&L 75mm thick PCC (1:3:6) type C-1, using 20mm graded stone aggregate as in Plinth protection/Paving finished surfaces even and fair Incling Joints complete all as specifiedand as directed..

Demolition of cement concrete of any description and any position not otherwise specifically provided for. and disposing off debris to outside the MOD land all as specified and as directed.

Demolition of floor, hearth or wall tiling including cement mortar bedding (including backing), removing serviceable tiles and disposing off debris to outside the MOD land all as specified and as directed.

Material and labour for 15 mm thick rendering in CM 1:3 including mixing approved water proofing compound on fair faces of brick or concrete surfaces, finishing surfaces fair and even and providing 1 mm thick Brushbond RFX (two component acrylic polymer modified cementious coating consisting of Brushbond RFX powder and Nitobond BBX acrylic emulsion grey in colour of (Make FOSROC or equivalent approved make) using stiff brush roller or trowel to obtain desired thickness complete all as per manufacturer's instructions, as specified and as directed.

Supply only liquid water proofing compound

M&L for PCC 1 : 5 : 10 type E2 (using 40 mm graded stone aggregate) 75 mm thick, in as in sub base of the sunken floors complete all as specified and directed.

M&L Non-skid joint free coloured ceramic tiles 7 to 8 mm thick, area of each tile exceeding 0.06 sqm but not exceeding 0.11sqm, as in floor set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigment to match colour of tiles over and including 15mm thick screed bed of CM 1:6 complete all as specified and as directed.

S & F glazed ceramic coloured printed tiles of size 450 x 300X 7mm as in dado set and jointed in neat cement slurry & pointed in white cement mixed with pigment to match with color of tiles over and including 10 mm thick rendering in cement motor 1:3 all as specified and as directed.

M&L non-skid coloured ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specfied and directed.

M&L non-skid coloured ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in skirting. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 10mm thick rendering in CM (1:3) complete all as specfied and directed.

Material and labour for Vitrified tiles flooring with Light shade 10 mm thick (Square / rectangular), tiles, area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and including 15 mm thick screed bed in CM (1:6) complete all as specified and as directed.

Material and labour for Vitrified tiles in skirting/dado, light shade with 10 mm thick tiles of area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, on vertical surfaces as in skirting, dado, etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and including backing coat of 10 mm thick CM 1:3 complete all as specified and as directed.

Demolition of Stone slabs & tiles of any description or thickness in floors, aprons etc. Laid, bedded & pointed in any mortar and removing debris outside MD land omplete all as specified.

M&L for 20mm thick Granite work (of any type) (table rubbed and premirror polished) in single piece in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in cement white (1:2) using marble dust with admixture of pigment to match the shade of granite, including making hole for gas pipe including half rounding the edges of granite, laid over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

S&F Chequered cement concrete commercial Tiles 25cm x 25cm x 20 to 22mm /30cmx30cmx20 to 25mm thick of with grey cement and pigment set jointed and pointed in neat cement slurry in floors and cut and polished laid over and including 15mm Screed in CM 1:6 including including taking old tiles all as specified and as directed..

S&F M-35 Grade machine pressed precast concrete interlocking paver blocks , 60 mm thick with grey cement and pigment any size, conforming to IS15658 all as specified and directed.

M&L for 50mm thick sand filling under floors including watering and conslidation complete all as specified and directed.

S&F in repairs PVC Mirror cabinet of size 350 x 450 mm complete all as specified and as directed. Make: Prayag or techno commercial equivalent as approved by GE.

S&F in repairs mortice lock 200mm size Mortice lock (four levers), vertical type, brass body including handles doors including screwing and fixing all as specified and as directed.

S/F tubular curtain rail, stainless steel anodized 25 mm dia all as specified & as directed including taking down unserviceable rod/rail complete all as specified and directed.

S/F stainless steel type brackets suitable to hold the curtain rod with sofio phenol (Lotto) and wooden round blocks suitable for curtain rod of 25 mm dia, decorative type fixed with suitable steel screws and PVC cleats, including taking down unservicable brackets complete all as specified and directed.

M&L in repairs stainless steel drawer channel of length 0.50m for modular kitchen

S & F in repairs post box lock with 2 set of key

M&L for preparing old plastered ceiling surfaces and applying one coat of distemper oil emulsion complete all as specified and directed

M&L for preparing old wooden surfaces and applying a coat of synthetic enamel paint over 10 cm width or girth complete all as specified and as directed.

M & L for painting of old steel surfaces of any description not otherwise described over 10 cm width or girth with one coat of synthetic enamel paint including preparation of surfaces etc complete all as specified and as directed.

M&L Preparing of old wall surfaces by getting rid of fungus and mould for affected area, filling of holes and dents & cracks with putty and applying one coat of distemper oil emulsion complete all as specified and directed

M&L for reinforced cement concrete M-15 (Nominal mix) using 20mm graded stone aggregate in slabs supported on walls,beams and columns in floors, roofs, landings, balconies,canopies, deck slabs and inshelves and the like complete all as specified and directed

M & L for rough finished flat surfaces of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed

M & L for steel reinforcement using TMTsteel bars 10mmdia and over, cut to length, bent to shape required, includingcranking, bendingspirally for hooping for columns, hookingends and bindingwith and includingmild steel wire (annealed) not lessthan 0.9mm dia complete all as specified and directed

S & F drapery rod in repairs, decorative type made of 25mm dia MS pipe powder coated(wall thickness not less than 0.63mm)bright finish colour and pattern as approved by GE(Price not less than Rs.100/mtr) .

S & F brackets for drapery rod in repairs suitable for 25mm dia MS pipe powder coated(wall thickness not less than 0.63mm) bright finish colour and pattern as approved by GE

Taking down steel water tubing 20mm dia bore and S & F CPVC pipe 20mm dia SDR 11 and plain CPVC SDR11 with all necessary fittings fixed in walls/ceiling/in floors complete all as specified and directed

S & F in repairs angle stop valve of 15mm dia pipe of PTMT any colour high pressure screwed for iron pipe and fixed,(Minimum weight 15mm-90gms) walls/ceiling/in floors complete all as specified and directed

S & f in repairsvBall valves 20mm dia high pressure of PTMT with epoxy coated Aluminium rod &high density plastic balls crewed for iron pipe and fixed. (Minimumweight 15mm-142gms/2 0 m m - 2 1 0 g m s . /25mm-455gms/ 40mm

S & F in repairs Aluminium anodised barrel tower bolts of extruded section, 150 mm long all as specified and as directed.

S & F in repairs Aluminium anodised cast type handles 150mm long all as specified and as directed.

S & F in reapirs aluminium alloy, anodised, sliding door bolt with hasp, staple bolt type and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections 300 mm long all as specified and as directed.

S&F in repairs MS butt hinges medium weight of size 100 mm cold rolled complete all as specified and directed.

S&F MS butt hinges medium weight of size 100 mm cold rolled complete all as specified and directed.

S & F in repair 150mm Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed

Removing demolished concrete materials/moorum/buliding rubbish/similar unserviceble materials by mechanical transport including loading,transporting and unloading outside MD land to a distance upto 5 Km complete all as specified and directed

Providing and fixing factory made uPVC glazed /wire mesh windows/ comprising of lead free uPVC multi-chambered frame, sash and mullion /coupler (where ever required) extruded profiles having minimum wall thickness of 1.7mm for series R1 and R2 profiles and 2.10mm for series R3 and R4 profiles conforming to EN;12608 in any shape ,colourand design duly reinforced with galvanized mild steel section made from roll forming process of required length (shape & size according to CPWD specification, uPVC extruded glazing beads ,interlocks and inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hard ware stainless steel (SS 304 grade) fastners of 8mm diawith countersunk head,comprising of matching polyamide PA 6 grade sleeve for fixing frame to finished wall as per IS 1367';part 1to 14 , plastic packers, plastic caps and necessary stainless steel screws etc.Profile of frame ,sash and mullion (if required) shall be mitred cut and fusion welded / mechanically jointed duly sealed at all corners ,including drilling of holes for fixing hardware and drainage of water etc.After fixing the frame the gap between frame and adjecent wall finished shall be filled with weather proof silicon sealent over backer rod of approved size and quality complete all as per approved drawing conforming to CPWD specification & directed by Engineer-in-charge.Section of steel reinforcement and cross section of uPVC profiles to be as per design approved by Engineer-in -Charge. Two and half track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track,wool pile Nylon rollers with SS 304 body.Using R2 series with frame (65mm & above) x(40mm & above) & glazed sash(25mm & above) x50mm & above) & fly screen sash (18mm & above) x(40mm & above)with Zinc alloy (Zamak) powder coated touch locks with hook (height upto 1.2 M)

Material and Labour for Preparation of old plastered sufaces and applying one coat of 100 % Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV Resistance as per IS 15489:2004 Alkali & fungal resistance,dirt resistance exterior paint of required shade ( Company Deport Tinted ) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.9 litre/ 10 Sqm complete all as specified and as directed

S & F figured glass 4mm thick pin head type and glazing with oil putty, or beading and necessary clips as square n exc. 0.5 Sqm in each pane complete all as specified and directed.

S &F in repairs, 5 feet pulley operated clothes drying system consisting of anodized aluminium pipes each outlet dia 22mm and inner dia 19.8mm,pulley made upof drin with rope guide mounted on channel pair of length24 inches(distance between two pipes is adjustable)locking system to hide rope knot channel to be mounted or fixed with tapping screws provided in kit,rope will be polyester branded undyed of 3-4mm dia etc complete all as specified and directed by Engineer-in-charge.

Please Enable Macros to View BoQ information