SPECIAL REPAIRS TO STRUCTURAL FRAME OF P-15 BUILDING AT CABS, MANKHURD, MUMBAI UNDER GE (NW) MANKHURD

Amount

Taking down cement plaster on brick or stone walls, etc, including raking out joints, hacking for key, scrubbing down with water , etc complete all as specified and directed.

Dismantling of brick work /stone bouldersbuilt in cement mortar including all quins, arches, pillars etc complete all as specified and as directed.

M&L for 15 mm thick polymer modified ready mix cement based plaster on the wall surfaces including finishing surfaces even and smooth complete all as specified and directed

M& L for rendering 10 mm thick ready mix plaster ceiling surface finished even & smooth with sagol finish complete all as specified.

M&L for 20 mm thick(12+8mm) polymer modified ready mixed cement plaster including necessary scaffolding up to 24 m height complete all as specified ( NOTE :- WPC shall be measured and paid separately) .

Supply only integral water proofing compound. Complete all as specified and directed.

Chipping, removing carefully loose/damaged concrete incl plastering (total thickness upto 60mm ) from RCC surfaces of columns, beams,Chajas, soffits of slabs etc by low impact Hammer/Breakar without damaging the structure & cleaning the surfaces with wire brush etc and disposal of debris out side MOD land, complete all as specified and directed. Note: Hard concrete shall not be removed by force.

M&L for cleaning existing reinforcement by sand blasting with suitable pump as directed by the GE and wire/ rotary wire brush to a shining bright finish, making the surfaces free from loose material, dirt etc complete and applying two coats of alkaline rust converting primer conforming to ASTM-B-117 of make. "Feovert" of "Krishna Conchem" OR "Roff Rust Cleaner' of 'Pidilite' OR 'Shali Rustoff' of 'STP Ltd', on rebars with time interval of 1 hr between the coats, complete all as specified and directed. (Note :- Mode of measurement: superficial area of concrete will be measured.)

M&L for Anticorrosive Treatment to Reinforcement using Corroseal - ZR of M/s Krishna Conchem or Epoxy Zinc Primer of M/s. Dr. Fixit by application on exposed reinforcement in two coats with time interval of minimum 4 hours between each coat. The application shall be done by brush after cleaning/wire brushing to the exposed steel surfaces, complete all as specified and directed . Note:- Mode of measurement: superficial area of concrete will be measured.

M&L for providing mild steel TMT bars in various structural RCC elements like column, beams and Slab etc. including cutting, bending, fixing the bars,welding with existing bars etc. complete all as specified and directed. Note: This item is applicable for additional bars required in the existing RCC structures.

M&L for Epoxy bond coat of Make Fosroc (NITOBOND-EP) OR EPOXY BONDING AGENT of Dr. Fixit OR equivalent of M/s. Krishna Conchem as approved by GE over exposed concrete surfaces prior to application of any type of mortar to ensure bond between old concrete & new concrete by brush application complete all as specified and directed.

M&L for building up the profile of structural members by using polymer modified mortar from M/s. Krishna Conchem (Molith-PMM) OR Polymer mortar HB of Dr Fixit, while the bonding agent is still tacking upto 20mm thickness including levelling, profiling etc complete all as specified and directed.

M&L for building up the profile of structural members by using polymer modified mortar from M/s. Krishna Conchem (Monolith-PMM) OR Polymer mortar HB of Dr Fixit, while the bonding agent is still tacking upto 40mm thickness including levelling, profiling etc in two layers, each layer not exceeding 20mm, complete all as specified and directed.

M&L for building up the profile of structural members by using polymer modified mortar from M/s. Krishna Conchem (Monolith-PMM) OR Polymer mortar HB of Dr Fixit, while the bonding agent is still tacking upto 60mm thickness including levelling, profiling etc in two layers, each layer not exceeding 20mm, complete all as specified and directed.

M&L for casting & repairing of excessively damaged distressedRCC members (exceeding 60mm in thickness) with prebatched, prepacked, single component ready to use microconcrete from Fosroc (Renderoc RG) or equivalent of Dr. Fixit as approved by GE, at any level/ height and at any lead or lift as directed including prefabricated water tight formwork, centering, scaffolding, also including mixing , laying, levelling, finishing, curing etc as per manufacturer's specifications and all other relevant works, complete all as specified and directed. Note : Items no 8 to 11 has to be done proir micro concrete and shall be paid seperately (Note: Reinforcement only shall be measured and paid separately).

M&L for leakage / seepage proof coating consisting of preparing the new/old surfaces of existing exterior walls, parapet walls, chajjas etc. and applying Primeseal primer of M/s Dr Fixit or equivalent chemical of M/s STP Ltd as approved by the GE or one coat of Chemstic PDE 600 elastomeric coating (and allowing to dry for 8hrs) under torch dry condition and subsequently applying two coats of water proofing decorative elastomeric coating system Raincoat of M/s Dr Fixit with DFT 100microns or Shalicryl 215 of M/s STP Ltd or Chemstic PDE 600 elastomeric coating (the surfaces after painting one coat shall be allowed to dry for 6 to 8hours before application of next coat) including necessary scaffolding etc complete all as per manufacturer instructions and all as specified & directed. Notes: (i) The aforesaid treatment shall be got executed by the contractor from the authorised applicator of the manufacturer(s) and also necessary authenticated documents on account of above shall be submitted by the contractor to the GE. (ii) Payment for filling cracks for old surfaces shall be made for separately under item No 9 here-in after. (iii) Payment for complete removal of existing treatment over old surfaces shall be made for separately under item No. 14.00 here-in after.

M&L for prepration of newly plastered or concrete surface of wall and applying two coat of distemper oil emulsion on walls with one coat of primer ( chalk white on plastered surfaces) and applying complete all as specified and directed

M& L for preparation of newly plastered surface of Ceiling and applying Three coat of white wash complete all as specified and directed

M & L for complete removal of existing treatment of wall surface (old surface) and applying two coats of leakage/seepage proof coating on exterior wall surface all as specified in item No 16.00 here-in-before. complete all as specified

M& L for preparation of old plastered surface of ceiling and applying one coat of white wash complete all as specified and directed

M& L for complete removal of existing treatment on surfaces of walls and applying two coats of oil bound distemper over 3 mm thick wall care putty applying on walls for smooth finish complete all as specified & directed.

Demolition cement concrete (unreinforced) in ground floors and pavings n. exc 15 cm thickness (below or above ground level). Complete all as specified and directed.

Demolition of stone slabs and tiles laid beded and pointed in any mortar of any description or thicknes in floors , aprons etc

S&F Vitrified light shade ceramic tiles 10 mm thick (square/rectanglar) polished area of each tile not exceeding 0.36 sqm ,in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to matched laid over 15mm thick badding layer of CM 1:6 complete all as specified and as directed.

All as per items No 24 above but in skirting or in dado including 10 mm thick rendering CM 1:4 complete all as specified and directed

M&L for coloured glazed ceramic tiles 300x200x6 to 7mm thick set and jointed in neat cement slurry and pointed with coloured cement as in skirting/dados including 10mm thick rendering in CM 1:4 as in backing coats of tiles finished the surfaces rough to receive tiles etc complete all as directed and specified.

M&L for non skid coloured ceramic tiles300x300x6 to7mm thick in floors etc set and jointed in neat cement slurry and pointed with coloured cement to match the shade complete including 15 mm thick CM 1:6 screed bed for laying floor finishes all as specifed and directed..

M&L for coloured Non-skid digital ceramic tiles 7 to 8mm thick (square/ rectangular) of approved size, area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, over and including 15mm thick cement mortar screed bed in CM 1:6 etc, complete all as specified and directed.

M&L for coloured 300x600x7 to 8mm thick digital ceramic tiles on vertical surfaces such as skirting,dado etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, over and including 10mm thick cement mortar backing coat in CM 1:4 etc, complete all as specified and directed.

M&L for PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection 75mm thick, with expansion joints & top surface finished even and smooth without using extra cement etc complete all as specified and directed.

Dismantling boarding any description fixed in any position with nails complete all as specified and directed .

S & F for hot dipped GI imposed grid with 24mm wide T section exposed flanges powder coated frame work comprising of main runner made from 0.33 mm thick GS sheet of size 24mmx32mmx3000 mm @1200 mm C/C GI wire 4mm dia fixed by rawl plug,level adjusters and screws etc flush fitting of 1200mm long cross tee interlocked between main runners @ 600mm c/c to form 1200mmx600mm modules cross tee longer than 600 mm to be supported independently 600mmx600mm modules shall be formed by fitting 600mm long cross tee centrally between 1200mm cross tee ,perimeter wall angle shall be GS of size 19mmx19mm and 0.45 mm thick 300mm long including 600mmx600mmx8 to 10mm thick armstrong gypsum reinforced board with painting with two coat of plastic emulsion paint over primer complete all as specified.

Demolition of lime concrete or lean concrete from sunken floor including floor tiles, hacking of surfaces after cleaning with wire brush (floor and adjoining walls) and disposing off debris outside MOD land complete all as specified and directed.

M & L for filling of lean concrete 1:5:10 type E2 (using 40 mm graded stone aggregates ) in sunken portion, as per requirement complete all as specified and directed.

M&L for PCC 1:2:4, type-B, using 20mm graded stone aggregated as in sub base of floors and for any other propose in any location mixed with WPC @ 2% by weight of cement, complete all as specified and directed. Note: Supply only WPC will be measured and paid separately.

M & L for special treatment for sunken portion of WCs/Bath & toilet etc executed in following stages : Stage 1: Providing 15mm thick plaster in CM 1:3 mixed with water proofing chemical of Dr.Fixit or Shalicrete 'R' of STP Ltd in the proportion/quantity all as per manufacturer's instructions. State 2 : Primer-Mix Tarfelt LM of STP Ltd (diluted with water in ratio 1:1) @ 250 gms/sqm and apply the primer on the plastered surfaces. Stage 3 : Application of 1st coat of Tarfelt LM of STP Ltd (without dilution with water) @ 1Kg/Sqm by brush all as per manufactuer's instructions. Stage 4: Laying fyber glass cloth (weight not less than 50gram/ Sqm) over the 1st coat while the coated surface is still sticky. Stage 5: After 6 to 7 hours interval, apply second coat i.e. final coat of Tarfet LM of STP Ltd (without Dilution with water) @ 1kg/ Sqm by brush as per manufacturer's instructions. Stage 6: Providing 10mm thick protective plaster in CM 1:3 mixed with STP No. 1 @ 250ml/50 Kg cement all as per manufacturer's instructions. Stage 7: Carryout ponding test for 48 hours to ensure water tightness of repaired sunken portion. NOTES :(i) Mode of measurement: Actual area treated (floor and adjoining walls) will be measured and paid . (ii) The above treatment shall be got executed through applicator of manufacturer and necessary authenticated documents on account of above shall also be produced by the contractor.

Taking up or down steel water tubing and connections of size 15mm bore, complete all as specified and directed.

Taking up or down steel water tubing and connections of size 20mm bore, complete all as specified and directed.

Supply and fixing of 20 mm outer diameter CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings (including provision of special fittings i.e. brass elbow, brass tee, Male brass threaded adaptor, female brass threaded adaptor etc required for fixing of bib tap, stop valve with CPVC pipes) concealed in walls/ ceiling or laying in floors etc., also including cutting chases, grooves and making good the same in CM 1:3 after fixing of pipes / fittings, complete all as specified and directed.

Supply & fix 20mm bore GI tubing, medium grade with and including all fittings and fixed to walls and ceilings or laid in floors, complete all as specified and as directed.

S&F in repairs cast iron Nahani trap 100mm dia out let including grating connecting jointing to waste pipe with lead jointing and taking out existing unserviceable traps by hacking out concrete joints and making good of surfaces complete all as specified and as directed .

S&F PVC connections 15mm size with PTMT nuts of length 600mm. Complete all as specified and directed.

S&F in repairs bib taps, cast copper alloy with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule fancy type chromium plated.

S&F in repairs pillar taps; of cast copper alloy with capstan; head chromium plated screwed downend with pressure with or without lettered hot or cold with long screwed shank and fly nuts, screwed for iron pipe& fixed complete all as specified

S&F pillar taps, auto closing system, fancy type for iron pipe of 15mm bore, Make: Jaquar code No CQT-23021 or equivalent of make Kohler or MARC as approved by the GE, complete all as specified and directed.

S&F in repairs hand shower (health Faucet) with 8mm dia 1 mtr Long easy flex tube in chrome finish & wall hook complete all as specified .

S&F in repairs angular concealed stopcock with wall flange fitted by 15mm bore complete all as specified and as directed

Supply and fix in repair 10 ltr, PVC, valveless, syphonic action type, flushing cistern, low level/ high level including inlet, ball valve, float and handle including brackets with and including PVC flush pipe 32 mm bore, connecting to WC etc, complete all as specified and directed.

S&F in repair towel rail 600mm long fixed with and including chromium plated brass screws and wooden/plastic cleats (Min wt 190 gms)

S&F in repairs PTMT grating doom 125mm dia of size. Complete all as specified and directed.

S&F in repairs two way Bib cock long body with wall flange fitted by 15mm bore complete all as specified and as directed

M & L for single piece Green Marble (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of following type including cutting and polishing, laid over and including 15 mm thick screed bedding layer in CM 1:4, complete all as specified and directed.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15 mm thick screed bedding layer in CM 1:4. is approved by GE

M & L for Machine cut cudappah stone slab 18-20mm thick over cementscreed base, laid and mixedwith pigment to match the shade of the slab window cills and jambs to full thickness of wall fixed in steps over cement screed bed 10mm thick in CM 1:4 and jointed with grey cement paste and slurry including rubbing and polishing complete all as specified and directed

Dismantling cast iron or reinforced concrete drain pipes , water pipes (any size or pattern ) including all fittings, balance under credit ( measure overall as fixed along the centre line over fitting and accessories ) all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls all complete all as specified and directed.

All as per item no. 56 above, but 75mm bore. Complete all as specified and directed.

S&F Vitreous china squatting pan orrisa pattern of size 580 x 440mm with integral foot rest and 'P' or 'S' trap including lime concrete bedding connecting flushing pipe and taking out old WC pan & lime concrete and unserviceable connections and making good for floor etc complete all as specified and as directed

S&F in repairs Vitreous china wash down water closet pan “Pedestal Pattern” coloured with wc seat cover coloured closed pattern with flat bottom and mild steel chromium plated or aluminized hinging device including pvc flush pipe and joints etc and connection to drain, flushing, pipe, anti- syphonage pipe, and fixing arrangements with fixing bolts etc ,complete all as specified and directed

S & F in repairs Vitreous China Wash hand basin white, flat back, size 550x400 mm size (flat back or angle back type)excluding taps, waste, chain and plug and procelaim stopper but including cutting for and pinning ends of brackets or erecting stand.incl taking down pillar tap complete all as specified and directed

S & F in repair Vitreous China Half stall (full) urinal White complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete all as specified and directed

S&F vitreous china, table top wash hand basin oval shape size( 420x420mm x135 mm) cat No : ARS-WHT-0538 Make of JAQUAR fixed on granite counter top slab including brass chromium plated full threaded waste coupling with grating 32mm dia pvc waste pipe including removing old wash basin complete all as specified and directed. (Note: Granite slab, RCC plat form, brick wall support etc shall be measured and paid separately)

S&F Urinals valve auto closing system with built in control cock &wall flange ( pressmatic) long screwed shanks and fly nut screwed for 15 mm bore pipe, complete all as specified and as directed

Removing plant/growth including its roots upto 1.00m of plant height at any location/at any storey and of any description and treating the surfaces with Acid (HCL) and making good surfaces with cement mortar 1:4, complete all as specified and directed.

S&F 110mm bore PVC (SWR) branch piece 110 mm dia bend . Complete all as specified and directed.

S &F PVC (SWR) bends, 75 mm bore, any radius. Complete all as specified and directed.

S &F PVC (SWR) junction single(single T), 110 mm bore, equal or unequal. Complete all as specified and directed.

S &F PVC (SWR) junction single(single T), 75 mm bore, equal or unequal. Complete all as specified and directed.

Taking down chowkats or frame with shutters ( without taking off shutters from the frame ) Sqm but not exc 1.5 Sqm each including complete all as specified and directed.

refixing of shutter same opening exc 1.50 sqm not exc 4.00 sqm each complete all as specified and as directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with Square tube, supply and fixing in opening as per specification given under SSR Part II 2010 including making good the disturbed surface all as specified and directed. Make: SYNTEX/SHALIMAR/RAJSHRI

M&L for factory made solid PVC panel type PVC door shutter 30mm thick consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rails, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent supplying and fixing in the frame at site as per specifications and drawing given under SSR Part II 2020 complete all as specified and directed. Make : SYNTEX/SHALIMAR/RAJSHRI

S&F Factory Made Solid PVC Moulded Door Shutters with wood free EPS 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing

S&F 100 mm long stainless steel butt hinges fixed with stainless screw. Complete all as specified and directed.

S&F aluminum anodised barrel tower bolts of extruded section of size 150 mm length. Complete all as specified and directed.

S&F 150 mm extruded aluminum alloy handles, fabricated type anodised. Complete all as specified and directed.

S&F aluminum anodised sliding door, bolts with hasp and staple ( bolt type ) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminum alloy, length of bolts 250 mm.

S&F bands, straps , supports or stays for rain water, ventilating pipes including bolts, clamps, hold fasts etc and similar small articles to Fe-410-0 or Fe-310-0 all as specified & directed.

M&L for PCC (1:2:4) type B1 using 20 mm graded stone aggregate as in hold fast, bed plate etc including necessary form work complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for etc, complete all as specified and directed.

S&F in repairs Collapsible steel gates, top hung, consisting for channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete complete all as specified and as directed.

Demolition of brick/cement concrete (unreinforced) / pcc tiles from existing roof/terrace etc and also removing/taking down of existing water proofing treatment of any thickness in any position including cleaning the surfaces of roof etc with wire brush complete and removing the retreived debris out side MD land, all as specified and directed.

M&L for PCC (1:2:4 ) type B-1 using 20 mm graded crushed stone aggregate as in levelling courses over RCC roof surface to achieve required slope including rounded or chamfered edges mixed with water proofing compound @ 3% by weight of cement and finishing surface even and smooth using extra cement etc complete all as specified (NOTE :- WPC shall be measured and paid separately as supply only )

M&L for screed bed 10 mm thick on brick work or concrete surfaces finished even and fair in cement plaster 1:4, complete all as specified and as directed with mixing water proofing compound.Note:( wpc shall be measured and paid separately)

M & L for preparation of existing surface by cleaning, removing of loose material and filling cracks with polymer modified mortar using Epoxy mortar, and applying Smartcare PU Magnum or equivalent is a polyurethane elastomeric waterproofing liquid membrane which offer superior mechincal, chemical, thermal, UV & weather resistant properties,as it is based on pure, elastomeric , hydrophobioc polyurethane coatings at a coverage of 1.6kg per sqmt in 2 coats, of make - ASIAN/ SIKA/ STP/FOSROC or equivalent

M&L for Preparation of old painted steel and iron surfaces of any description, not otherwise described, over 10 centimetre width or girth and applying Two coat of synthetic enamel paint complete all as specified and directed.

Taking down existing aluminium joinery of any description (frame/ shutters) with all fittings (but excluding grills) complete all as specified and directed.

S&F standard aluminium section powder coated (minimum thickness of powder coating shall be 50 micron and colour shall be as approved by GE ) as in frame, shutters for doors, window / ventilators, fixed / openable / sliding or in any pattern, cut to size, jointed with cadmium plated steel screws, including rubber beading or gaskets for fixing glass, provision of hinges, screws, plugs, handle, lock, roller, Nylon ball bearing etc complete all as specified and directed (Aluminium section shall be of make Jindal/Hindalco/ Indalco) Note:- Weight of Aluminium sections as per actual or as per IS or as per manufacturer, whichever is less, shall only be considered for payment. Cost of other items / accessories required for entire completion of the work shall be deemed to be included in the quoted rate. However glass panes, shall be measured and paid separately as supply only under respective item.

Supply only 4.80mm thick glass ordinary quality plain not exc 0.5 Sqm each pane with including wooden/rubber beading or gasket for aluminium section complete all as specified.

Supply 12 mm thick prelaminated particle, board, interior grade, prelaminated both sides with decorative choice laminations, fixed with screws to aluminium frame work complete all as specified.

S&F aluminium anodised Grills of approved design for window / ventilators and fixing with F/U channel including drilling as required in RCC sections in rectangular or architectual type balcony opening in existing building, complete all as specified and directed. Note: The Grills shall be of Model DG-100/DG-102 of Make Deco or equivalent make as approved by the GE.

M&L for Providing and injecting chemical emulsion for Post Constructional Anti-termite Treatment along external wall where the apron is nor provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. Complete all as specified and directed.

M&L for Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 metre means radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for providing antitermite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ .5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same

M&L for earthing complete with Copper earth plate electrode 600x 600x 3 mm buried directly in ground with top edge of the plate not less than 1.5 mtrs below normal gound level and connected to earth test point by means of copper Strip of size 20x3 mm all as specified and shown in electric plate No 3 of MES SSR Part-I 2009 including earthwork, PCC chamber, CI cover, protection and watering pipe, funnel, mesh etc all as required at site and all as directed and including taking down of old earthing materils

M & L for Taking down of aluminium/copper strip of any size laid as roof conductor, down conductor, earth contunity conductoor including air termination rod from any position / location of sheds/ buildings of height up to 30 meter for re-fixing the same after straightning the conductor/removal of bends, including replacing the old insulators with new one and saddles all as directed at site Note -i) The quoted rae is deemed to inclusive of T & P/scaffolding/staging etc for executing the work in buildings of height up to 30 meter. ii) The raete is deemed to be inclusive for providing Procealin insulator, screws, Plugs iii) PCC Block required shall be measure and paid under respective items

M&L for Refixing the aluminium/copper strip of any size from any position / location of sheds/ buildings of height up to 30 meter & laid as roof conductor, down conductor, earth contunity conductoor same after straightning the conductor/removal of bends, including replacing the old insulators with new one and saddles all as directed at site Note -i) The quoted rae is deemed to inclusive of T & P/scaffolding/staging etc for executing the work in buildings of height up to 30 meter. ii) The raete is deemed to be inclusive for providing Procealin insulator, screws, Plugs iii) PCC Block required shall be measure and paid under respective items iv) Span of PCC Block support shall be kept at 70 cm. v) Span of insulation support (without block) shall be fixed at 30 cm space.

S&F aluminium earth strip as roof/down/earth ontunity conductors of size 25x3mm with saddles, Parcelain, insulators, stainless steel screws, washer etc at any position / location of sheds/ buildings of height up to 30 meter complete all as specified and directed by the Engineer-in-charge Note -i) The quoted rate is deemed to inclusive of T & P/scaffolding/staging etc for executing the work in buildings of height up to 30 meter. ii) The rate is deemed to be inclusive of Procealin insulator, screws, Plugs etc.

S&F air termination, single pointed aluminium rod, 12mm dia 300mm long at any position / location including all necessary terminal base plate of thickness not less than 4 mm, scaffolding / staging required, etc. complete all as specified and directed by the Engineer-in-charge

M&L for Test point terminal block made of gun metal or phosphorus bronze size 75x75x25 mm, drilled and screwed including 3 nos. 8mm dia 25 mm long hex. Head screw in replacement of the unserviceable. Including MS box made out of 3 mm thick shheet for fixing the block

M&L for pre-cast cement concreate block of size 0.15M x0.15M x0.15M for fixing of Aluminium strip type C1 1:3:6 using 20mm graded stone aggregate in cement motor 1:4, including fixing the coccrete block on terrace of bldgs of height up to 30 meter all as directed at site Note -i) The quoted rae is deemed to inclusive of T & P/scaffolding/staging etc for executing the work in buildings of height up to 30 meter.

Supply and fixing of GI pipe light grade of size 40 mm bore for laying in trenches/floors or walls including all fittings for fixing complete as required and directed

M&L for painting on wall with synthetic enameled paint of black colour of 200 x 150 mm size and writing work for earth test result with date & year all as specified and directed

Taking down copper/ aluminum point wiring surface type, concealed type, (Light/Fan/Socket or power) complete including fixtures and fittings such as switches, ceiling roses, pendants, regulators, socket, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces to walls floors etc complete all as specified and directed.

M & L for point wiring with two run PVC insulated FRLS unsheathed 1100 Volts grade single core multistranded copper conductor cable 1.5 Sqmm drawn in and including casing-caping and accessories, fixed on wall / ceiling etc with necessary fixing accessories and earth continuity conductor cable of 1.5 Sqmm size connected to common earth and earth dolly including 2 mm thick pressed steel terminal boxes concealed in wall covered with laminated sheet top cover 3 mm thick for mounting switches / sockets / fan regulators fixed with Cadmium plated machine screws all as specified for one light / fan / bell point controlled by one switch.

All as per item No 105 here-in-before but for one 5A 2pin/3pin socket out let multipurpose on the same board with other switches.

All as per item No 105 here-in-before but for one 5A 2pin/3pin switch socket out let multipurpose on independent Board.

All as per item No.105 above but wiring complete with 2.5 Sqmm for 3 pin 15A socket multipurpose on independent board

S & F Switch Piano, flush type, single pole, one way, 5 Amps, 230 Volts. Complete all as specified and directed.

S & F Ceiling Rose, surface bakelite, three terminals, AC, 230 Volts. Complete all as specified and directed.

S & F Switch Socket combination 2 in 1, 5 Amps, 5 pin multipurpose, flush type, 230 Volts. Complete all as specified and directed.

S & F Switch Socket combination 5 in 1, 15 Amps, 6 pin multipurpose, flush type, 230 Volts. Complete all as specified and directed.

S & F Ceiling fan regulator electronic stepped type, AC, 230 Volts, flush type. Complete all as specified and directed.

M & L for point wiring complete with proper colour coding with 1100 Volts grade, 1.5 Sqmm PVC insulated FRLS, unsheathed, wire confirming to IS-694, Part II, ISI marked with multistranded copper conductor drawn in and including PVC concealed conduit of suitable size of wall/ RCC slab/ ceiling/ colunms/ beams etc with all accessories, fittings, PVC junction boxes etc, including provision of modular metal flush boxes andframe suitable for mounting modular switches, sockets, fan regulators etc, also including 1.5 Sqmm, PVC insulated, FRLS unsheathed, 1100 Volts multistranded copper conductor green colour as contineous earth wire connected to common earth dolly for one light point/fan/bell point controlled by one way switch, complete all as specified and directed. Note : Rates included for concealed cutting as required at site without any damage and making good in CM 1:4 and matching the surface as required 2 all screws and washer for point wiring shall be Stainless steel. Nothing is extra shall be admisible on this account

All as per ser item No 114 above but for one 2pin/3pin socket outlet 5 Amps on same board complete all as specified and directed.

All as per ser item No 114 but for one 5 Amps 2 pin / 3 pin switch socket outlet multipurpose on Independent Board complete all as specified and directed.

All as per item No. 114 above but wiring complete with 2.5 Sqmm for 3 pin 15 A socket multipurpose on independent board complete all as specified and directed.

S&F modular type 6A one way SP switch 1 module confirming to IS: 3854-1997 with fingure proof terminal complete all as specified and directed.

S&F modular type 2/3 pin combined shuttered type 6 Amps socket 2 module conforming to IS: 1293-2005 complete all as specified and directed.

S&F modular type 2/3 pin combined shuttered typr 16 Amps socket 2 module conforming to IS: 1293-2005 complete all as specified and directed.

S&F modular type 16 A one way SP switch 2 module confirming to IS: 3854-1997 with finguer proof terminal complete all as specified and directed.

S&F modular type 120W step fan regulator of 2 module size conformng to IS: 11037-1984 complete all as specified and directed.

Supply & Fix Modular Bell push flush type 5 amp, 230 Volts complete all as specified and directed.

Supply and fix bell ding dong AC 230 V single pole. complete all as specified and directed.

S & F Modular Blank plate 1 module suitable for Modular switch boards all as specified and as directed

S & F Modular cover plate 12 modules. Complete all as specified and directed.

S & F Modular cover plate 3 modules. Complete all as specified and directed.

S & F Modular cover plate 1 modules. Complete all as specified and directed.

S & F in repairs MCB DB 8 way SPN, double door, vertical type, IP - 43 with 200 Amps rated bus bar, AC and connecting up complete all as specified.

S & F in repairs MCB DB 12 way SPN, double door, vertical type, IP - 43 with 200 Amps rated bus bar, AC and connecting up complete all as specified.

S & F MCB SPN 40 Amps, 240 / 415 Volts, 50 Hz, 10 KA Breaking capacity. Complete all as specified and directed.

S & F MCB SP 5 to 32 Amps, 240 / 415 Volts, 50 Hz, 10 KA Breaking capacity. Complete all as specified and directed.

S&F LED tube light fitting suitable for 4' (including LED Tube Rod 1 x 20 W), 230V Decorative box type fitting, powder coated top cover, with bipin holders, connector block, etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size and PVC square blocks for fixing LED Fitting all as specified and directed.

Supply and fix decorative recessed type LED light fitting 35/36 watt (size 2'x2') and including driver unit, including provision of 3 core copper flexible cable 1.5 Sqmm from ceiling rose to connector, including making addition/altn to existing false ceiling and providing of false ceiling sheets, aluminium frames including fixing arrangements complete etc.

M & L for Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers all as shown in Electrical Plate No.3 connected to earthing test point all as specified or indicated including testing on completion.

M&L for sub main wiring with two run single core 4.0 Sqmm PVC insulated FRLS multistranded flexible copper conductor cable 660/1100 volts grade down in through non metalic PVC Conduit with ISI Marked not less than 25 mm dia and including one run PVC insulated 4.0 Sqmm single core single strand copper conductor as continous earth wire in green colour connected to common earth dolly all as specified and as directed including taking down of old sub main wiring Note : 1 Two Run of 4.0 Sqmm Wire, one run of earth wire PVC Conduit will be measured and paid one unit.

Supply and Laying or fixing or passing through pipe, XLPE/PVC insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 10 Sqmm 3 core including necessary connection and providing cable lugs as required including disconnection/taking down of existing cable all as specified.

Supply and fix FRP looping box prewired complete fitted with terminal connector block bakelite 8 Way of 20 Amps Rating with shorting strip copper, fitted with one Nos of MCB SP 05to 30 Amps 240 Volts for termination of incoming of incoming and outgoing cables, local connection to fittings complete all as directed by EIC at site conforming to IP 55 degree of protection

Taking down and refixing of Old MCB DB of any size complete all as specified and directed.

Taking down of Old metal sheet enclosure of any size complete all as specified and directed.

Taking down carefully including servicing and refixing of same Window type AC 1.5/2.0 TR and connected items complete all as specified and directed.

Supply & fix copper tube for split type AC of capacity 1.5 TR to 2.5 TR including pipe insulation. Complete all as specified and directed.

M & L for Cutting holes into or through brick walls built in cement mortar for fixing the fan and making good the distrubed surfaces in cement mortar 1:3 complete all as specified and directed.

S & F single pole and neutral enclosure with a two pin and earth and metal clad plug socket complete with one single pole MCB 20 Amp 240 Volts complete all as specified including concealing in wall and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 450m sweep with, blades, and frame and louvers all as specified and directed.

S & F in replacement of GI steel tubing medium grade 40 mm dia and length up to 1.5 meter bent to shape of offset angle upto 45degree for fixing of security /street light fittings including MS clamps made of 32mm x5mm flat iron, nuts , bolts, etc all as directed by Engineer in charge

S & F building Security light fitting 35/36 Watt made up of pressure die cast alluminium body with mid power LED as lighting sources and PC cover having Top opening separate driver compartment with IP 65/66 protection and impact resistance of IK 07 including fixing arrangements and taking down old rusted bracket fittings complete all as per directed by Engr- in – charge.

Taking down carefully and Re-fixing of the same ceiling fan 1200mm sweep including provision of cable from ceiling rose/ conductor to fan and spray painting of ceiling fan with two coats of synthetic enamel paint, after preparation of surfaces, complete including testing all as specified and directed.

Supply & fix 1200 mm sweep ceiling fans complete with accessories 230 V, BEE 5 star rated complete all as specified and directed.

M&L for cutting existing road/hard standing not exc 45x50 cm in wide & depth getting out excavated material for laying GI tube returning filling & well rammaing watering finish suraface 10 cm from top using PCC 1-3-6; including removal of surplase soil all as directed.

Supply & fix GI cable tray with cover of size 300 mm X 100 mm including spacers, screws, saddles for fixing the trunking in wall/GI including fixing arrangement such as support, nuts, bolt etc complete all as specified and directed.

Supply& fixing in repairs of Chequered plate Fe 410-W(Gde-E- 250)A quality- for cable trenches, ladders including equal angle trench frames, including cutting as per requirement of site, square cut or notched (ordinary and counter sunk) forming holes, without any including providing handles. Complete all as specified and directed.

Supply& fixing in repairs for mild steel work confirming to Fe-290, GdeE-165 in stairs/ladders including stringes, treades, landing, balusters, hand rails etc including applying two coat of paint over one coat of red oxide complete all as specified and directed.

Excavation in trenches not exceeding 1.50 m wide and n.exc 1.5 m in depth for foundation of poles, cable etc, not exc 10 sqm on plan and getting out in soft/loose soil including taking out brick protection etc complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25cm thick complete all as specified and directed.

Removing excavated materials (soils) not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and directed.

Cutting of existing GI pipe of size 40 mm dia and inserting GI tee/bend including all required new fittings complete with testing,all as specified and directed.

Supply, lay/fix, connect and testing steel water tubing of 25 mm bore, medium grade, galvanised with screwed and socketed joints, in any length, including supply and fixing all fittings and fixtures, clamps and fixed to wall/ceiling or laid in trenches/floors complete all as specified and directed.

All as per above item No 158.00 but of size 40 mm

S&F gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete of size 25 mm dia. Complete all as specified and directed.

All as per above item No 160.00 but of size 40 mm

M & L for MS clamp of size 40x5 mm thick for pipe support/clamping. Complete all as specified and directed.

S & F in float ball valve assembly 25 mm bore , high pressure grade, with polythene float, fly nuts, screwed to GI pipe or brass ferrule, CI fittings viz. nipples, check nuts, reducers, elbow, sockets, etc. fixed complete all as specified and as directed.