Construction of drain at sipani saw mill back side in w no 9 cmc ckm limits

Construction of drain at sipani saw mill back side in w no 9 cmc ckm limits

Earth work in surface excavation by mechanical means for lowering &leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and tec...

Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work PWD Common DSR 2023-24 Volume 3(P No: 15 I.No: 3.1 )

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...

Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade),...

Construction of Embankment by excavating the available approved,Gravel/Murrum deposited at a place or borrow pits during or prior,excavation with all lifts and lead, transportation to site, spreading,...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work PWD Common DSR 2023-24 Volume 3(P No: 15 I.No: 3.1 )

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing 50 mm Dia HDPE Sleeve pipe with allied accessories at ferrule point of HSC to assist in regulating flow with allen key with appurtenances., complete.(P.No 109, I.No.9.22 C S.R2023-24,VOL5)

Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uP...

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Providing & fixing electro fusion saddle comply with BS EN12201 -3:2011, PN-12.5 rating and food grade raw material as per BS 6920 with material of construction PE 80 or PE 100 and colour of fitting -...

Providing and laying 100mm thick pre-cast cover slabs over drains & Rain pit of width not exceeding 800 mm using M20 concrete reinforced with Micro Alloyed High carbon steel with 3mm - 3ply wired stee...

Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and ...