REPAIRS AND RE-CANNING OF ALL SORTS OF CHAIRS AND REPAIR AND REPAINTING OF STEEL FURNIYURE OF RMS UNDER BSO (SOUTH) UNDER GE (SOUTH) BANGALORE

Amount

ALMIRAH LARGE/MEDIUM STEEL. FD-1032,1031 Removing existing unserviceable three way locking device and Supply & Fix three way locking device with cover all as directed by the Engr in Charge and shown on drgs for almirah large steel.

Removing existing unserviceable three way locking device and Supply & Fix three way locking device with cover all as directed by the Engr in Charge and shown on drgs for almirah med steel.

Removing existing unserviceable lock and Supply & Fix new lock Make: Godrej/Link/Harrison of appropriate size, 6 levers with duplicate keys chromium plated or equivalent as suitable in almirah complele all as directed by Engr in Charge and shown on drgs for almirah large/medium steel. Notes : (i) Unit rate quoted shall include for provision/repairs to back plate, cover to key hole, back side cover, locking device etc. (ii) Steel chromium plated handle shall be measured and paid separately

Removing existing unserviceable handle and Supply & Fix new chromium plated handle 125mm long to almirah large/medium steel all as specified/directed and shown on drg.

Removing existing unserviceable clamps for shelves and spot welding the shelves to almirah sides as directed by the Engr in charge and shown on drgs for almirah large/medium steel.. Note :- Welding each shelf completely will be measured as a single unit.

M & L for Preparation of old painted steel surfaces and applying one coat of synthetic enamel paint Make: Asian paints/Nerolac/Berger/Jenson & Nicholson on all external and internal surfaces of almirah large steel (Size 920 x 485 x 1985mm) including fixing new 3mm hard rubber pad in the bottom of legs ect complete all as specified and as directed by Engr-in-Charge.

M & L for Preparation of old painted steel surfaces and applying one coat of synthetic enamel paint Make: Asian paints/Nerolac/Berger/Jenson & Nicholson on all external and internal surfaces of almirah medium steel (Size 760 x 440 x 1270 mm) including fixing new 3mm hard rubber pad in the bottom of legs ect complete all as specified and as directed by Engr-in-Charge.

Removing existing unserviceable/ damaged shelves for almirah large steel and Supply & Fix MS sheet CRC 1mm thick bent to shape and applying one coat of synthetic enamel paint Make: Asian paints/Nerolac/Berger/Jenson & Nicholson over one coat of red oxide primer including welding to the almirah all as specified and shown on drg.

Removing existing unserviceable/ damaged shelves for almirah medium steel and Supply & Fix MS sheet CRC 1mm thick bent to shape and applying one coat of synthetic enamel paint over one coat of red oxide primer including welding to the almirah all as specified and shown on drgs.

Removing existing unserviceable/ damaged/ broken legs for almirah large and Supply & Fix new legs and applying one coat of red oxide primer including welding to the almirah all as specified and shown on drgs.

Removing existing unserviceable/ damaged/ broken legs for almirah medium and Supply & Fix new legs and applying one coat of synthetic enamel paint over one coat of red oxide primer including welding to the almirah all as specified and shown on drgs.

TABLE OFFICE CLERK STEEL FD-1004,307 Material & Labour for cleaning / preparing the existing surfaces of table office clerks steel including inner surfaces of drawers steel and applying one coat of synthetic enamel paint Make: Asian paints/Nerolac/Berger/Jenson & Nicholson as approved by Garrison Engineer by spray process to achieve a uniform finish and to fix Hard rubber shoe for legs all as directed.

Removing existing unserviceable drawers of table office clerk steel and Supply & Fix new drawer made of MS sheet CRC 1 mm thick bent to shape to its original position including lock Make: Godrej/Link/Harrison as specified and shown on drgs.

TABLE STEEL 900 X 600 X 760 MM WITH DRAWER FD-1007,1008 (a) Removing existing unserviceable top and Supply & Fix 18 mm thick particle board commercial exterior grade pasted with 1.5 mm thick plastic laminated sheet fixed on top as directed and shown on drgs.

Removing existing unserviceable drawers of table and Supply & Fix new drawer made of MS sheet CRC 1mm thick bent to shape to its original position and applying one coat of synthetic enamel paint over one coat of red oxide primer all as specified and shown on drgs.

Removing existing unserviceable/ damaged leg/ frame and replacing with new leg/frame of 25mm x 25mm square MS Tube 1.6 mm thick welded and applying one coat of red oxide primer including welding to the table all as specified and shown on drgs.

Painting to steel frame of table 900x600x760 mm one coat of synthetic enamel paint as approved by Garrison Engineer all as specified and shown on drgs.

LOCKER STEEL FD-1029 Material & Labour for cleaning/preparing the existing surfaces of locker steel including inner and outer surfaces and applying one coat of synthetic enamel paint as approved by Garrison Engineer by spray process to achieve a uniform finish all as directed.

Removing existing unserviceable/ damaged/ broken legs for lockers steel and Supply & Fix new legs and applying one coat of synthetic enamel paint over one coat of red oxide primer including welding to the locker and providing rubber pad 3mm thick for legs all as specified and shown on drgs

Removing the existing UNSV /damaged hanging rod and S&F new hanging rod 20 mm dia steek cromium plated conduit pipe. Teo sockets shall be provided at the end of hanging rod.

Removing UNSV handle and S&F new chromium plated handle 100 mm long to locker steel fixed to shutters all as specified/directed and shown on drg

Removing UNSV Hasp and staple and S&F new cromium plated hasp & staple 75 mm long to locker steel all as specified and directed and shown on drg.

BOOK CASE STEEL: FD-1028 Removing the existing UNSV handle and S& F new steel handle 100 mm on to book case steel all as specified and directed and shown on drg.

Removing existing UNSV lock and S&F new lock with duplicate keys make Godrej or equivalent all as specified and directed by Engr-in-charge

Removing existing UNSV glass of shutters and S&F new glass to book case steel all as specified and directed and shown on drg.

M & L for Preparation of old painted steel surfaces and applying one coat of synthetic enamel paint Make :Asian paints/Nerolac/Berger/Jenson & Nicholson as approved by Garrison Engineer on all external and internal surfaces of book case steel as specified and as directed and shown on drg

BOOKSHELF OPEN LARGE STEEL: FD-69 Removing Book shelf open large steel from unit stores and taken to hard stand for preparation of old painted steel surfaces and applying one coat of synthetic enamel paint grey/olive green Make :Asian paints/Nerolac/Berger/Jenson & Nicholson as approved by GE on all external surfaces as specified and as directed by Engr-in-charge

Chair Dining FD: FD-279 Removing the existing unserviceable cane from Chair dining and recanning with new best quality of plastic cane size 1.80mm x 0.46 mm for weaving and 3 x 0.60 mm for beading as per Godrej pattern all as specified and directed.

Chair writing FD: FD-280 Removing the existing unserviceable cane from Chair writing and recanning with new best quality of plastic cane size 1.80mm x 0.46 mm for weaving and 3 x 0.60 mm for beading as per Godrej pattern all as specified and directed.

Chair Dining FD : FD-279 Removing the existing unserviceable rear leg and S&F new teak wood rear leg complete as shown on drg and all as specified and directed.

Removing the existing unserviceable front leg and S&F new teak wood front leg complete as shown on drg and all as specified and directed.

Removing the existing unserviceable back rest and S&F new teak wood back rest complete as shown on drg and all as specified and directed.

Removing the existing unserviceable front rail and S&F new teak wood front rail including drilling holes at 12.5 mm C/C complete as shown on drg and all as specified and directed.

Removing the existing unserviceable rear rail and S&F new teak wood rear rail including drilling holes at 12.5 mm C/C complete as shown on drg and all as specified and directed.

Removing the existing unserviceable side rails and S&F new teak wood side rails including drilling holes at 12.5 mm C/C complete as shown on drg and all as specified and directed.

Chair Writing : FD-280 Removing the existing unserviceable rear leg and S&F new teak wood rear leg complete as shown on drg and all as specified and directed.

Removing the existing unserviceable front leg and S&F new teak wood front leg complete as shown on drg and all as specified and directed.

Removing the existing unserviceable back rest and S&F new teak wood back rest complete as shown on drg and all as specified and directed.

Removing the existing unserviceable front rail and S&F new teak wood front rail including drilling holes at 12.5 mm C/C complete as shown on drg and all as specified and directed.

Removing the existing unserviceable rear rail and S&F new teak wood rear rail including drilling holes at 12.5 mm C/C complete as shown on drg and all as specified and directed.

Removing the existing unserviceable side rails and S&F new teak wood side rails including drilling holes at 12.5 mm C/C complete as shown on drg and all as specified and directed.

Removing the existing unserviceable/ broken Arm rest and S&F new teak wood Arm rest complete as shown on drg and all as specified and directed.

Vivek Engineers

REENA INDUSTRIES