NIT 8 Item 6

Supplying, installation testing and commissioning of 40W, 5700K, IP65 LED post top fittings powder coated aluminium die cast and spun aluminium body with clear /opal diffuser with high power LEDs suitable for landscape lighting. Make: Havells, polycab, Bajaj or any DJB approved make (ref. similar product RubyPT35wled830PSYMTOPC/ Polycabitemcode: PGR0201009 or equivalent.

Supply and fixing of 4 core 25 Sq. mm Armoured aluminium conductor PVC insulated and PVC sheathed/XLPE cable 1.1 KV confirming to IS 1554/1/88 with latest amendment. Make: Grandley, KEI, polycab, any other approved make of DJB.

Supply and installation of SMC junction boxes anti-corrosive water resistant, UV protected, High temp resistant. Confirming to UL 94 VO standards, ERDA approved, weather able and suitable for all kinds of climatic conditions. Self-coloured fire retardant and high dielectric strength maintenance free.Make:Syntex/Binani

Supplying and fixing 5A to 32A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. Single pole. (As per DSR 2.10.1)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. As per DSR 7.1.1

Supplying and laying of dia. 63mm (OD-63 mm & ID-51 mm nominal) size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. As per DSR 14.15.1

Fabrication and Supply of 3 Mtr. long hot dip galvanized octagonal pole with 120mm bottom diameter and 70mm top diameter made up of 3mm thickness sheet along with base plate of 200X200X10mm shall be made of as per standard for steel quality BSEN-10025 and for GI IS:2629 OR equivalent .Galvanizing thickness must be 70 micron average Materials used in construction of galvanized octagonal pole shall be of the tested quality of steel of minimum tensile strength 540 MPa (55 Kgf/mm2) earthing arrangement a through hole of 10mm diameter shall be provided in each pole .The poles may also be marked with the ISI certification mark. The poles shall be marked with designation, manufacturer’s identification, year of manufacture and name of the purchaser. IS: 2713 (Part-I and III): 1980 as amended up-to date ) . Working load with factor of Safety: 2.5( inKgf ) 227 Tolerance As per IS: 2713 (Part-I & Part-III): 1980.Crippling load (in Kgf) 403.Drawing will provided by the manufacturer before starting of work. To and fro cartardge including

Supply of foundation bolt M16X300mm long anchor bolt 'J' type.(Set of 4 nos.)including base plate,M16 nut(2nos) M16 plain washer(2nos). Base plat having 4nos θ 20 of holes on 200 PCD for M16 bolts.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level: 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) for Foundation of 3 mtr pole as per the manufacturer specification and design include all kind of civil work like (providing and making rain forced RCC cement concrete foundation (1:1.5:3) &Base foundation 600 X 600 X 1400 mm.and above base to ground level foundation with proper fixing of Foundation Bolt 450 X450 x 1400 mm. Iron Bar approx 28 kg cutting bending and fixing to make frame of foundation. made up cement concrete as per the drawing provided by the manufacturer, bending and placing in position reinforcement of cold twisted bar as required with positioning and fixing of foundation bolts etc. Comp. As per DSR 5.1.2

Supplying and embedding 40 mm dia G.I. pipe (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape complete as required As per DSR 11.6.2

Supplying, installation, testing & commissioning of main control and indicating panel made out of 16 SWG MS sheet to accommodate the following items duly powder coated.1Nos 4P 32A MCB,1 set phase indicator on/off switch,1contactor 240V coil voltage rating 40A,1 no. photo-cell, Emergency stop push button, Bypass switch And any other item required for proper function of lightening is including no extra cost will be paid separately.

Installation of junction boxes on each pole with the help of clamps, nut & bolts etc. Make of MCB:-Havells/Standard/L&T/any DJB approve make.

Testing and commissioning of all the jobs in the presence of engineer in charge with the help of all kind of man power, tools and tackles, machinery like Hydra JCB, Ladder etc. Department is not bound to provide any kind of man power and machinery.

Nitin Engineering India

N.K. BUILDCOM

K R ELECTRICAL

HARI ELECTRICAL CO.

Volts And Watts Electronics Pvt. ltd.

DEV ENGINEERS