Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.5 LAccepted-AOC AO 144 GF SECTOR 48 C MOHALI | FATEHGARH SAHIB | PUNJAB | 140405 | ₹10.5 L | L1 | Accepted-AOC Quoted Lowest rate |
| 2 | L2₹10.9 L+₹41,494.96 (3.94%)Rejected-AOC | ₹10.9 L+₹41,494.96 (3.94%) | L2 | Rejected-AOC Quoted Highest rate |
| 3 | L3₹11.5 L+₹1.0 L (9.52%)Rejected-AOC 1625 B 1 OLD GADDA KHANNA ARYA SAMAJ PATIALA | PATIALA | PATIALA | PUNJAB | ₹11.5 L+₹1.0 L (9.52%) | L3 | Rejected-AOC Quoted Highest rate |
Tender Value
₹12.9 L
EMD Value
₹25,854
Closing Date
9 May 2026, 3:00 pmClosed
Executive Engineer provincial division Chandigarh
Room no 315-16 3rd floor 17 bays building sector 17 chandigarh
Repair/Renovation of kothi no. 923 Sector 39 Chandigarh
2026_CEPW_167506_1
8 Dated 30.04.2026
Open Tender
Civil Works - Buildings
Percentage
60 days
Sector 39 Chandigarh
Please refer Tender documents.
3 documents required · 3 mandatory
₹5,000
₹25,854
Yes
3 Jun 2026
2 May 2026
11 May 2026
2 May 2026
9 May 2026
2 May 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Dismantling glazed tiles (to be carefully removed) | 40.7 | sqm | 133.79 | ₹5,445.25 |
| 2 | Providing and laying vitrified floor tiles of different sizes in light colour shades made using Double Charge technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete.a Size 600x600 mm (14.115 a) | 49.88 | sqm | 1,104.07 | ₹55,071.01 |
| 3 | Providing and applying Anti Termite Treatment using post constructional chemical treatment measures as per IS - 6313 - 2001 ( Part 3 ) & using Chemical containg chloropyrifos systemic insecticide diluted to manufacturers specifications by drilling holes in the floor slab & along skirting 300 mm apart & 12 mm dia, drilling holes along all possible entry points such as junctions of floor and walls, doorframes, sewage lines, entry points , etc. & injecting them with the chemical solution. (14.132) | 15 | ltr | 1,175.71 | ₹17,635.65 |
| 4 | Providing and Laying Out Door precast designer chequered tiles of any size & any shape 25mm thickness having top layer ofwhite cement mixed with pigment, laid on 20mm thick bed of ordinary cement mortar 1:3 (1 ordinary cement: 3 fine sand), joints grouted with white cement slurry containing pigment to match the shade complete in all respect as per specifications and to the entire satisfaction of engineer-in-charge. (14.135) | 72.76 | sqm | 1,079.84 | ₹78,569.16 |
| 5 | Providing and laying Rectified Porcelin floor tiles 400x400mm or more (thickness to be specified by the manufacturer) of premium quality conforming to IS:15622 of approved make in all colours laid on 20mm thick bed of Cement Mortar 1:4 ( 1 Cement : 4 Fine sand) for new flooring or laid with cement based high polymer modified quick set tile adhesive (water based) of approved make IS 15477 marked using 5 Kg adhesive per Sqm of tile area in average 3mm thickness over existing floor, including pointing the joints with white cement and matching pigments etc., complete (14.122) | 42.94 | sqm | 917.6 | ₹39,401.74 |
| 6 | Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete I.S.I Designation No. II (size of door 701mm to 850mm) (17.43 b) | 10 | Nos | 1,210.47 | ₹12,104.7 |
| 7 | roviding and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in paneling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-In-Charge. Pre-laminated particleboard with decorative lamination on Both side. (17.46 (ii)) | 2.25 | sqm | 1,209.42 | ₹2,721.2 |
| 8 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with PVC Plug/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminum snap beading shall be paid in basic item) -(i) Float glass panes of 5 mm thickness (17.47 (i)) | 4.88 | sqm | 1,090.37 | ₹5,321.01 |
| 9 | Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :-A 300mm x 16mm (17.49 A) | 10 | Nos | 209.65 | ₹2,096.5 |
| 10 | Providing & fixing 4" stainless steel handles ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge. (17.68) | 24 | Nos | 75.85 | ₹1,820.4 |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.84 MB
SBD923n.pdf
Tender Documents • 7.56 MB
BOQ.xls
Tender Documents • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .