REPAIR AND MAINT OF UNDERGROUND LT CABLE AND ASSOCIATED WORKS AT CERTAIN UNITS UNDER 140 ARMD BDE AT MIL STN JAISALMER

Amount

Supply & laying in repair XLPE insulated, screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) with aluminium conductor 1100 volts grade 95 Sqmm 3.5 Core complete all as specified and directed by Engineer-in-charge.

Supply & laying in repair XLPE insulated, screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) with aluminium conductor 1100 volts grade 70 Sqmm 3.5 Core complete all as specified and directed by Engineer-in-charge.

Supply & laying in repair XLPE insulated, screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) with aluminium conductor 1100 volts grade 50 Sqmm 3.5 Core complete all as specified and directed by Engineer-in-charge.

Supply & laying in repair XLPE insulated, screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) with aluminium conductor 1100 volts grade 35 Sqmm 3.5 Core complete all as specified and directed by Engineer-in-charge.

Supply & laying in repair XLPE insulated, screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) with aluminium conductor 1100 volts grade 25 Sqmm 4 Core complete all as specified and directed by Engineer-in-charge.

Supply & laying in repair XLPE insulated, screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) with aluminium conductor 1100 volts grade 16 Sqmm 4 Core complete all as specified and directed by Engineer-in-charge.

Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, laying of cable/pipe etc or for shafts, wells, cesspits, manholes, pier holes etc not exceeding 10 Sqm on plan and getting out in soft/ disintegrated rock complete all as specified & directed by Engineer-in-Charge.

Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, laying of cable/pipe etc or for shafts, wells, cesspits, manholes, pier holes etc not exceeding 10 Sqm on plan and getting out in hard rock complete all as specified & directed by Engineer-in-Charge. Note (i) Hard rock obtained from excavation shall be stacked properly. Stacked hard rock shall be measured by deducting 50% quantity for voids for hard rock, remaining quantity will be considered of soft/disintegrated rock. (ii) Hard rock obtained shall be issued under Schedule of credit, which shall not be allowed for uses in work.

Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soft/ disintegrated rock complete all as specified & directed by Engineer-in-Charge.

Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified & directed by Engineer-in-Charge.

M&L for sand cushioning to underground PVC/XLPE cable with tibba sand and punning to provide required cover complete all as directed by Engineer-in-charge. (Note :- For the purpose of payment only punned thickness will be measured).

Supplying and laying Jodhpur stone quarry faced stone slab cover 25 to 30 cm in width, 50 to 60 cm long and 40 to 50 mm thick, laid dry and abutting each other with gap between adjacent slab not exceeding 10 mm over under ground cables for protection complete all as specified & directed by Engineer-in-charge.

S&F in repair MCCB, 63 Amps, four pole, 16 KA, 415 volt with fixed thermal maganetic release complete all as specified and directed by Engineer-in-charge. (Note: ICS = ICU 100%).

S&F in repair MCCB, 100 Amps, four pole, 16 KA, 415 volt with fixed thermal maganetic release complete all as specified and directed by Engineer-in-charge. (Note: ICS = ICU 100%).

S&F in repair MCCB, 160 Amps, four pole, 16 KA, 415 volt with fixed thermal maganetic release complete all as specified and directed by Engineer-in-charge. (Note: ICS = ICU 100%).

S&F in repair MCCB, 200 Amps, four pole, 25 KA, 415 volt with fixed thermal maganetic release complete all as specified and directed by Engineer-in-charge. (Note: ICS = ICU 100%).

S&F in repair MCCB, 250 Amps, four pole, 36 KA, 415 volt with fixed thermal maganetic release complete all as specified and directed by Engineer-in-charge. (Note: ICS = ICU 100%).

S&F in repair MCCB, 400 Amps, four pole, 36 KA, 415 volt with fixed thermal maganetic release complete all as specified and directed by Engineer-in-charge. (Note: ICS = ICU 100%).

S&F in repair GI pipe light grade of dia 50 mm laying in road and along with poles for cable protection complete all as directed by Engineer-in-charge.

All as per item No. 19 above but size 80mm dia.

All as per item No. 19 above but size 100mm dia.

Labour for felling of tree exc 30 cm and n exc 100 cm girth including cutting of trunk and branches and shacking of serviceable material and disposal of unserviceable material to a distance n exc 50 m and clearing site all as specified and directed by Engineer-in-charge.

Taking down old broken cable route indicator of any type etc all as specified and directed.

S & F LT cable route indicator made out of cast iron plate of 150 mm dia 4 thick having embosed wiriting LT cable fixed on MS angle iron 30x30x5 mm of 900 mm long with two nuts,bolts and grouting 500 mm length under ground and splitted and bent to shape and embedded in ground with PCC (15 cmx 15cm x 15 cm complete all as specified and directed. Note :- Rate quoted by the Contractor shall deemed to inclusive of Earth work excavation, painting, writting letters and PCC complete.

M&L Cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of 95 Sqmm complete all as specified and directed by Engineer-in-charge.

M&L Cable jointing kit for 11 KV (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 Sqmm complete all as specified and directed by Engineer-in-charge.

Repairing only lights of area security around the Military Station complete with repairing and making it functional to the satisfaction of JE/Engineer-in-charge complete all as specified and directed. Note :-(i) Contractor will bring the printed complaint slip before the commencement of Job. (ii) Arrangment of ladder suitable type for repairing of lights will be the responsibility of contractor & shall deemed into quoted rates.

Taking down old unserviceable earthing etc all as specified and directed.

M & L bore earthing not less than 200 mm dia 300 feet deep filled with black soil up to 50 feet from bottom complete with galvanized iron pipe 100 mm bore medium grade 6 meter long flanged at bottom & boltted/nuts & provided 12 mm holes (staggered) at centre to centre up to upto 250 feet complete length, burried directly in ground filled with 10 mtr alternate layer of chemical magnisium sulphate & salt up to ground level duly clamped on ground connected to galvanized iron strip 50x6 mm as earthing lead by means of bolt and nut, check nuts and brazing/welding, check nuts and washer of galvanized iron or steel including brazing work and 100mm dia light grade pipe for earth lead protection and testing on completion upto trnasformer neutral complete with funnel, earthing chamber and earthing lid cover all as specified and directed by Engr-in-Charge.

Taking down old unserviceable test point terminal block with all connected items as specified and directed.

M&L for test point terminal block made of gun metal or phosphprous bronze size 75x75x25mm, dirrled and screwed including 3 Noos , 8mm dia 25mm long hex, head screw complete all as specified and directed by Engr-in -Charge.

Taking out unserviceable Battery and controller any type complete all as specified and directed.

S&F Battery 12 V, 40 AH with controller suitable for solar lighting system complete all as specified and directed by Engineer-in-charge.

Taking out Unserviceable Junction Box for street light of any size complte all as Specified and directed by Engineer-in-charge.

S&F Junction Box for street light made of PVC box including MCB 16 Amps - 01 No and terminal 03 Nos for single phase and neutral on porcelain based insulator with locking arrangement fixed to pole with MS clamps of suitable (20mmx3mm) with nuts, bolts & washer including painting of MS clamp complete all as specified & directed by Engineer-in-charge.

M&L preparation of the old decorated existing external and internal steel surfaces fo feeder pillar boxes/panels/boards of any description and in any position including removal of disintegrated & deteriorated paint either by hand scrapping or by blow stopping as required and applying two coats of synthetic enameled paint (grey in colour) with using spray machine on old prepared surfaces complete all as specified and directed by Engineer-in-charge.

Dismantling, taking down and removing the old existing unsv non-functional/broken hinges of any description and in any postiion of existing feeder piller boxes/panel boards/feeder pillar boxes etc and supplying and fixing new cold rolled 100mm long medium weight mild steel butt hinges in position with necessary spot welding etc including making necessary adjustment for free and smooth movement of panel and locking arrangments complete all as specified and directed by Engineer-in-charge. (Note : All Hinges fixed in one panel will be considered under one job only).

Taking down or removing of rusted body part/panel door existing LT Panel feeder pillar box of any size and shap, supply, fixing and febrication in existing, shape and size with and including 2 mm thick CRCA sheet and all jointing material such as nuts, bolts or washer and welding etc complete all as specified and directed by Engineer-in-charge.

NOTE : (i) The panel board repaired shall be made totally enclosed, weather proof/wemin proof for installing incoming/ outgoing MCCB/Switch fuses/cable etc complete all as directed. (ii) The rates quoted by the contractor are deemed to be with and including necessary cutting, welding, levelling and jointing etc. as directed to match & accommodate with the existing feeder pillar box/panel board. (iii) The replaced porting shall be painted with two coat of synthetic enamelled paint over a coat of red oxide primer. (iv) The rates quoted by the contractor deemed to be with and including dismantling/taking out/removing carefully, any damaged part/portion of the feeder pillar box/panel board as directed.

Excavating in post hole (or similar holes) each n exc 0.5 Cum, getting out returing, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft/loose soil, all as specified and directed by Engineer-in-charge.

S&F hand rails, half round or other steel section or core for wooden hand rail straight portion, drilled and countersunk for balusters running bars for doors, halusters, nosing to steps including embending in concrete and screwing etc, wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riverting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified & directed by Engineer-in-charge.

M&L for mild steel TMT bars 10mm dia & over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed by Engineer-in-Charge.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exceeding 5cm long and dia of neck 11 to 15mm, all as specified and directed by Engineer-in-charge.

Supply only Chain link MS galvanised fencing, any size or type all as specified and directed by Engineer-in-charge. (Note :- Fencing only will be measured and paid separately).

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc, including provision of binding wire and including taking down all as specified and directed by Engineer-in-charge. (Note :- Rate quoted by the contractor shall deemed to inclusive of taking down existing fencing).

M&L for preparation of new or previously untreated steel surface of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red- oxide, zinc chrome primer complete all as specified & directed.

S&F in repair 300mm long mild steel sliding door bolts plate type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as directed by Engineer-in-charge.

S&F in repair 100mm size, butt hinges, heavy weight, cold rolled mild steel, and fixed all as specified and directed by Engineer-in-charge.

Supply fabricate, fixing structural mild steel RS joist, channel angle iron, flate iron and brackets etc for fabrication of cross arms, bracing supports clamps including D clapms, eye hook and back plate etc fabricated from structural steel section inclduing nuts, bolts,washers, welding (Cold and Hot) drilling holes for bolts, bend to any shape or size as indicated and directed, inclusive of one primer coat and two coats of aluminium paint after preparation of surfaces complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of old painted surface of LT Concrete electric pole of any size by removing all dirt, dust,etc and painting complete surface up to pole top including connected accessories with dual coat of apex exterior , synthetic enamel paint over a coat of primer of approved colour of black and white strip 30 cm height (Total 5 Nos), including painting the cross arms/bracing support on poles with a coat of aluminium paint, silver colour aluminium paint with coating of primer and writing of identification Nos with proper stencil cut etc as per directions by Engineer-in-Charge.

Material and labour for preparation of old painted surface of LT Steel tubular pole of any length by removing all dirt, dust, etc and painting complete surface up to pole top including connected accessories with dual coat of synthetic enamel paint over a coat of primer of approved colour of black and white strip 30 cm height (Total 5 Nos) & rest of the height of the pole is in silver colour aluminium paint, including bracing support on poles and writing of identification Nos with proper stencil cut etc as per directions by Engineer-in-Charge.

Demolition the existing broken/ D-shaped PCC and M&L for plain cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) for damaged coping, encasing around of pole including necessary form work finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

S&F in repair, cable 6 sqmm two core, aluminium conductor, PVC insulated, unsheathed, 1100 volts grade complete all as specified and directed by Engineer-in-Charge.

Taking down old LT Panel of any capapcity & any descrption complete all as specified and directed by Engineer-in-charge.

Supply, installation, commissioning and testing of LT FP box (CPRI Approved) outdoor type 415 Volts, 50 Hz, 3 Phase 4 wire supply Padastal mounted double door center opening with lockng arrangement, factory assembled,CPRI approved, weather and vermin proof (protection class IP-54) canopy on top, outer door made out of 3.15 mm thick CRCA sheet for individual hinged type door for MCCBs, powder coated and supported on 50 mm x 50 mm x 6 mm angle iron frame and 3.15 mm thick MS rubber beading, complete to accommodate including the following:-

(a) Bus bar chamber comprising 4 Nos Aluminum strip bus bars air insulated and PVC sheathed capacity 250 Amps with colour coding in separate sheet steel enclosure.(set of four). (b) MCCB 415 Volts, 200 Amp rating 4 pole, Capacity 25 KA -01 No (Incoming) (c) MCB 415 volts, TPN 40 Amp, rating 4 Pole (triple pole and neutral), Capacity 16 KA - 16 Nos (d) LED type/Neon type indicating lamps panel mounting type RYB -03 Nos. (e) Danger notice Board (f) PCC work complete

SS SODHA ENTERPRISES

M/s Shree Construction Company

AUTOMATION AND SWITCHGEAR CONTROL

RAAPS CONSTRUCTION