Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹6.8 L
EMD Value
₹13,670
Closing Date
6 Jun 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
LCA Tejas Division, Bangalore
HINDUSTAN AERONAUTICS LIMITED LCA Tejas Division, Bangalore
Providing Aluminium Partition Enclosure to Ferrule Expansion Machine in Hangar 2, Providing Roller Blinds in Office of AGM Plg inside Plant I and Modifications to Toilets and other Civil Works at the Annexure Building Between Hangar 8 Hangar 9 inside Plant II of LCA Tejas Division.
7515
HAL/LCA-Tejas/PM/C-08/2024
Works
Bangalore Complex-LCA-PG
₹0
₹13,670
6 Jun 2024
16 May 2024
16 May 2024
6 Jun 2024
Name of the individual/ Firm/ Company: *Mandatory
Type of ownership
Details of Constitution or Legal Status such as certificate of Incorporation, shops and establishments, Contractor registration
Address for Correspondence
PAN No.:
Service Tax Registration No.
Goods and service Tax ID No.
Contact Details
Registered Contractor
Related Document to be uploaded to HAL e Portal.
I.T Returns for past 03 Years (Assessment Years)
Related Document to be uploaded to HAL e Portal.
Average Annual Financial Turnover during the last 3 years, ending 31st March 2023 of the previous financial year[should not be less than 30% of Amount put to tender]
TURNOVER IN Rs.
Audited Report duly certified by the Auditor to be enclosed to support the Turnover.
ESI & PF Nos. with proof
Bank(s) details: [Copy of the cheque leaf to be uploaded]
Related Document to be uploaded to HAL e Portal( Cancelled cheque leaf to uploaded).
Latest Bankers Solvency certificate from any Nationalized /Scheduled Bank issued NOT before 12 months from the last date of Tender submission .
Related Document to be uploaded to HAL e Portal.
Experience of having successfully completed similar works during last 7 years ending last day of previous month [ Latest work experience certificate may be uploaded] (i) Three similar completed works each costing not less than an amount equal to 40% of estimated cost. (ii) Two similar completed works each costing not less than an amount equal to 50% estimated cost. (iii) One similar completed work costing not less than an amount equal to 80% estimated cost.
Type of work: [Incase of private works the same shall be supported with TDS certifcate]
Please Enter Details for Work No I.
Type of Work: [Incase of private works the same shall be supported with TDS certificate]
Please Enter Details for Work No II.
Type of Work: [Incase of private works the same shall be supported with TDS certificate]
Please Enter Details for Work No III.
Details of person holding the Power of Attorney ( if different from the contact person)
Related Document to be uploaded to HAL e Portal.
Documents Need to Uploaded
Related Document to be uploaded to HAL e Portal.
DECLARATION I
DECLARATION II
Related Document to be uploaded to HAL e Portal.
DESCRIPTION
Supplying, fabricating and fixing powder coated aluminium (Min. thickness of powder coating 50 microns) work for partitions and ventilators, with extruded built up standard tubular sections / appropriate Z or other sections of approved make conforming to designation 63400 of IS 1285 and IS 733 including fasteners, EPDM rubber / neoprene gasket, snap beading for glazing / panelling, clips, cleat angle, C.P. brass / stainless steel screws etc., all complete as directed by the Engineer-in-Charge. Note: Glazing clips, cleat angles shall be measured in aluminium items for payment, EPDM rubber / neoprene gasket and screws will not be paid .
Supplying, fabricating and fixing powder coated aluminium (Min. thickness of powder coating 50 microns) work for windows with extruded built up standard tubular sections / appropriate Z or other sections of approved make conforming to designation 63400 of IS 1285 and IS 733 including fasteners, EPDM rubber / neoprene gasket, snap beading for glazing / panelling, clips, cleat angle, C.P. brass / stainless steel screws etc., all complete as directed by the Engineer-in-Charge Note: Glazing clips, cleat angles shall be measured in aluminium items for payment, EPDM rubber / neoprene gasket and screws will not be paid .
Providing and fixing 12 mm thick prelaminated particle board with decorative lamination on both sides flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin-charge. Note: Glazing clips, cleat angles shall be measured in aluminium items for payment, EPDM rubber / neoprene gasket and screws will not be paid .
Providing and fixing glazing With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm), in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . Note: Glazing clips, cleat angles shall be measured in aluminium items for payment, EPDM rubber / neoprene gasket and screws will not be paid .
Providing and fixing upto floor five level precast cement concrete solid block, including hoisting and setting in position with cement mortar 1:3(1cement:3 course sand )cost of required cantering and shuttering complete-1:1 1/2: 3(1 cement :11/2 course sand (zone-III) Derived from natural sources :3 graded stone aggregate 20mm nominal size derived from natural sources
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering including curing e.t.c., -All works upto plinth level- 1:2:4 (3(1 cement :2 course sand (zone-III) Derived from natural sources :4 graded stone aggregate 20mm nominal size derived from natural sources)
Supplying, fixing, testing and commissioning sinks of size 610 mm x 460 mm and min. bowl depth 200 mm conforming to IS 13983, made of stainless steel 304 grade , supported on suitable brackets including bedding in cement mortar to dwarf wall or including fixing cantilever brackets, connecting union to pipe, connecting to floor trap, painting bracket with two coats of synthetic enamel paint over a coat of approved primer etc. with all necessary fittings and accessories like rubber plug with CP brass chain, 50 mm CP brass waste fitting, nuts, washers etc., all complete as directed by the Engineer-in-Charge.
Providing, applying and laying cement mortar (1:4) plastering 15 mm thick on brick/concrete surfaces, finished even and smooth with trowel for internal walls etc., with necessary materials, labour, scaffolding, curing, tools and tackles etc., at all heights, all complete as directed by the Engineer-in-Charge.
Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes, 25mm nominal Dia pipes, having thermal stability for hot &cold water supply including all CPVC plain and brass threaded fittings this includes joints of pipes &fittings with one step CPVC solvent cement,trenching,refilling &testing of joints complete as per direction of engineer incharge
Supplying, fixing, testing and commissioning 75mm dia PVC pipes conforming to IS : 13592 Type B and of approved make with rubber ring joints conforming to IS 5382,leaving 10mm Gap for thermal expansion ,single socketed pipes jointed together with solvent, on floors and walls, including all necessary clamps, pipe cutting and wastages, cutting and making good the walls, connecting to existing lines etc., all complete as directed by the Engineer-in-Charge.
Providing and fixing P.V.C waste pipe of 32 mm Dia for sink or wash basin including P.V.C waste fitting complete Flexible Pipe
Providing and fixing on wall face unplasticised-PVC moulded Bend 87.5 Deg-110mm pipe, fittings/accessories for unplasticised Rigid PVC rain water pipes conforming of IS:13592 type A, including joints with seal ring conforming to IS:5382,leaving 10mm gap for thermal expansion
Providing and fixing on wall face unplasticised-PVC moulded Single TEE without Door 110x110x110mm, fittings/accessories for unplasticised Rigid PVC rain water pipes conforming of IS:13592 type A, including joints with seal ring conforming to IS:5382,leaving 10mm gap for thermal expansion
Providing and fixing on wall face unplasticised-PVC moulded Bend 87.5 Deg-75mm pipe, fittings/accessories for unplasticised Rigid PVC rain water pipes conforming of IS:13592 type A, including joints with seal ring conforming to IS:5382,leaving 10mm gap for thermal expansion.
Providing and fixing on wall face unplasticised-PVC moulded Single TEE without Door 75x75x75mm, fittings/accessories for unplasticised Rigid PVC rain water pipes conforming of IS:13592 type A, including joints with seal ring conforming to IS:5382,leaving 10mm gap for thermal expansion
Providing and fixing Brass bib cock 15mm nominal bore , of approved quality and brand in the pipeline including all fittings/accessories, as per manufactures specification and direction of EIC.
Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. 610 x 390 x 370 mm having pre & post flushing with water(250ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufactures specification and direction of EIC.
Dismantling tile work in floors and roofs, For thickness of tiles 10mm to 25mm, laid in cement mortar including stacking material with 50mtr lead .
Making chases upto 7.5x7.5cm in walls including making good and finishing with matching surface after G.I pipe etc
Demolishing cement concrete, brickbat,kankar etc. of any description and any thickness, manually/ by mechanical means including disposal of material within 50 metres lead or nearby disposal area, as per direction of Engineer - in - charge.
Providing and laying ceramic floor tiles of size 300x300mm(Thickness to be specified by manufacture) of first quality confirming to Is:15622 of approved make in colours such as white,ivory,grey,fume red brown ,laid on 20mm thick cement mortar 1:4(1cement :4course sand),jointing with grey cement [email protected]/sqm including pointing the joints with white cement and matching pigment etc.
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
Providing and fixing Granite stone stone slab, Jetblack Granite, polished on both side, with table rubbed, edges rounded and polished ,of size 75x75 cm deep and 1.8cm thick ,fixed in urinal partitions by cutting a chase of appropriate width with chase cutter in wall and floor and embedding the stone in the chase with epoxy ground or with cement concrete 1:2:4 (1cement:2coarse sand:4graded stone aggregate 6mm nominal size), cutting at bottom for flow of water, etc, as per direction of Engineer -in-charge and finished smooth.
Dismantling W.C.Pan of all sizes including disposal of dismantled materials including malba all complete as per directions of EIC
Supplying, fixing, testing and commissioning 110mm dia PVC pipes conforming to IS : 13592 Type B and of approved make with rubber ring joints conforming to IS 5382, Leaving 10mm gap for thermal expansion ands single socket pipes jointed together with solvent, on floors and walls, including all necessary clamps, pipe cutting and wastages, cutting and making good the walls, connecting to existing lines etc., all complete as directed by the Engineer-in-Charge.
Supplying, jointing, testing and commissioning, approved make 15mm dia Brass Stop cock etc. complete all as directed by the Engineer-in-Charge.
Providing and fixing white vitreous china water closet squatting pan of size of 580x440mm (Approx) (IWC) along with "s" or "p"trap including dismantling of old WC seat and "s" and "p" trap at site complete with all operations including all necessary material, labour and disposal of dismantled material including malba,all complete as per the direction of engineer incharge
Supplying and laying granite 20 mm thick (Table rubbed and polished) in washbasin counters, cooking platforms, storage counters, shelves and the like including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite, cutting for sink/wash basin, chasing & fixing to the wall in CC 1:2:4, round nosing of edges etc., all complete as directed by the Engineer-in-Charge.
Painting old plastered interior surfaces with two coats of low VOC less than 50grams / litre, premium plastic emulsion with acrylic base conforming to IS 15489, of approved make, colour, shade, tint & pattern at all levels, over a coat of approved alkali resistant primer including preparing the surface by removing loose dirt and any organic growth, smoothening the surface by using suitable emery paper, filling crevices and finishing even with white cement putty or Plaster of Paris, necessary scaffolding etc., all complete as directed by the Engineer-in-Charge.
Supplying, fabricating and fixing Structural steel work riveted, bolted or welded in built up sections using IS sections, bolts, plates, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer and two coats of synthetic enamel paint all complete including required scaffoldings, welding rods, etc, as directed by EIC
Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calcium silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required.
Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes,having thermal stability for hot &cold water supply including all CPVC plain and brass threaded fittings this includes joints of pipes &fittings with one step CPVC solvent cement,trenching,refilling &testing of joints complete as per direction of engineer incharge 15mm nominal Dia pipes
Supplying, jointing, testing and commissioning, approved make 20mm dia GM body gate valves with screwed ends etc. complete all as directed by the Engineer-in-Charge.
Dismantling Washbasins of all sizes and refixing with all needed fittings all complete as per directions of EIC
Supplying and fixing SS Wire mesh of average width of aperture 1.4mm(Approx) and nominal dia of wire 0.63mm(Approx) in aluminium windows neatly all complete as directed by Engineer-in-charge. (Basic price =260.00+10% Contractor Profit+GST 18% = 260.00x1.1x1.18 =337.48)
Fixing only glazing With available float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm), in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket, cleaning the ex etc. complete as per the architectural drawings and the directions of Engineer-in-charge . Note: Glazing clips, cleat angles shall be measured in aluminium items for payment, EPDM rubber / neoprene gasket and screws will not be paid .
Supplying, fixing, testing and commissioning PVC (SWR grade) floor trap with 75 mm dia outlet of approved make, including connection with PVC soil / waste pipe, providing SS cockroach free floor grating with cup, cutting and making good the floors if required, etc., all complete as directed by the Engineer-in-Charge.
Providing and fixing of classic system Blackout fabric Roller Blinds which should be made up of 100% Polyester with Acrylic coating resistant to cracking and fraying. It should have 100% blackout rate. The fabric should be min.0.52mm(±5%) and having min. weight 358g/sqmtr(±5%). Light Fastness ≥6. Can be installed On Face / Ceiling Mount / On Frame /in Recess. The Fixing Brackets are made by steel with powder coating to give greater finish. Brackets shall be accommodating overhead or side mounting with clutch assembly on either end of the blind. The ROLLERTUBE shall be of extruded by non rusting Aluminium alloy with 1.25mm thickness, with anodized for long life, to be available in 32-40mm dia metre for small and big blinds respectively. Aluminium bottom bar with powder coating of 55 microns of approved colour. Wall thickness: 1mm. Width 15mm, Height 30mm, Weight of 300gm /rmtr (+-5%). For a perfect fall of fabric to avoid warpage /floating. Installation to be insert type with end caps to give a neat look. Operating Chain with plastic /steel ball chain (or as per manufacturer's standard) adoptable to the clutch pitch for smooth, quiet lifting & lowering of blind. The blind can be stopped in desired position with the help of stop lock used for raising or lowering action of the shades. The work includes fixing wood sheet and wrapping with blind fabric for the longer windows. The fixing arrangements as per manufacturer’s specification all complete as directed by Engineer-in-charge. (Area shall be measured width as blind width and height from roller top to bottom of bottom-bar).
Total (Exclusive of GST)
Percentage above or below for total value on Sl.No. 39
Total amount after Percentage Sl.No. 39 + Sl.No. 40
GST @ 18% for total value on Sl.No. 41
Total amount (Inclusive of GST) Sl.No. 41 + Sl.No. 42
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
08_NIT_PARTITION_BLINDS_TOILETS.pdf
TENDER_DOCUMENT • 0.09 MB
08_TD_PARTITION_BLINDS_TOILETS.pdf
TENDER_DOCUMENT • 1.72 MB
08_PQ_PARTITION_BLINDS_TOILETS_BID.xlsm
TENDER_DOCUMENT • 0.01 MB
08_PQ_PARTITION_BLINDS_TOILETS.pdf
TENDER_DOCUMENT • 0.01 MB
08_PB_PARTITION_BLINDS_TOILETS.pdf
TENDER_DOCUMENT • 0.27 MB
08_PB_PARTITION_BLINDS_TOILETS_BID.xlsm
TENDER_DOCUMENT • 0.10 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .