Removal and Supply, Installation, Testing and commissioning of 1 no. of Heavy duty escalator for 8.7 MTR and 1 no. of Heavy duty escalator for 5.7 MTR vertical height with arrangement of top covering shed at Nana Chowk, Grant Road, Mumbai.

Amount

Removal of old Escalator 8.7 MTR

Removal of old Escalator 5.7 MTR

Providing and applying epoxy base paint to RCC piers, columns, beams, girders, diaphragms, slabs, parapets etc. including cleaning the surfaces thoroughly so as to remove deposited salts, oil, grease, tar, moisture etc. from the surface, preparing the surface, applying putty consisting of epoxy base paint and steolite powder, to render the concrete surfaces smooth by covering small irregularities and applying one coat of epoxy paint including scaffolding etc. complete as specified and directed.(2 coats epoxy + primer)

Supply,Installation,Testing and commissioning of 1 no. of Heavy duty escalator for 8.7 MTR vertical height with necessary electrical work at Nana Chowk,Grant Road,Mumbai.

Supply,Installation,Testing and commissioning of 1 no. of Heavy duty escalator for 5.7 MTR vertical height with necessary electrical work at Nana Chowk,Grant Road,Mumbai.

Old MS structure dismantling and refixing with fabrication work .Total length approx 28 MTR and top height 5 to 7 mtr (including scaffolding work )

Old MS structure dismantling and refixing with fabrication work .Total length approx 35 MTR and top height 7 to 9 mtr (including scaffolding work )

MS Structure bottom foundation strenghening and supporting fixing and fabrication work of new 75x75x 5 mm box and round pipes,2mm, 4 mm, 5 mm, 6mm & 10 mm thickness plate. (temporary 150 sq ft store room including)

SITC of UV protected heave duty Roof of Polycorbonate sheet, Total length- Appro 28 MTR and top height 5 to 7 mtr (including scaffolding work )

SITC of UV protected heave duty Roof of Polycorbonate sheet, Total length- Appro 35 MTR and top height 7 to 9 mtr (including scaffolding work )

Providing and fixing rolling shutters made out of 18 gauge steel sheets for curtains, including bottom rail, 100 mm wide guide channels for opening width up to 4.0m and 150mm wide guide channel for opening width more than 4.0m, lock plates, locking arrangement on both sides, fixing bolts, pulling handles, MS hood of appropriate size, rolling arrangement, standard make springs in brackets etc. including fixing of frames with rag bolts, grouting of parts in position etc. and also including two coats of red oxide zinc chromate primer and two coats of synthetic enamel paint of approved colour, shade and brand etc. complete as per IS:6248 / specifications and as directed by Engineer In Charge. The shutter should withstand wind pressure of 47meters per second.

Providing LED Lights of 150 watt across inside Roof structure

IP 42 Wall/column Mounted distribution board with one Nos of 63A 4P MCB and 3 Noss 16A TP MCB / 12 Noss. 16A SP MCB as outgoing (4 way TPN DB)

63A 4P MCB

25A DP MCB

ELCB with 100mA Sensitivity 63Amp. 4Pole

1st category Cu armoured cables FRLSZ outer sheathed- 4C x6 Sq.mm

Cable End Termination For Copper Cables – 2C x 1.5 / 2.5 Sq.mm

Cable End Termination For Copper Cables – 4C x 6 Sq.mm

1st category Cu armoured cables FRLSZ outer sheathed- 4C x 10 Sq.mm

Cable End Termination For Copper Cables – 4C x 10 Sq.mm

2nd category Al armoured cables FRLS outer sheathed- 4C x 16 Sq.mm

Cable End Termination For Copper Cables – 4C x 16 Sq.mm

Earthing station with 100mm Dia., 13mm thick, 3000 mm long GI pipe (Class B or better) earth pit as per IS 3043. The earth pit shall be provided with watering pipe (Class B) with wire messed funnel, 25x3 GI strip / 2X8SWG G.I. wire up to chamber ( wire or strip size as per fault level), disconnecting links with 600 x 600 mm (clear) RCC chamber & heavy duty 3mm thick CI chequered plate cover with hinge & stainless steel bolts. Bentonite/Charcoal & Salt shall be provided for earth pits. Excavation, back filling, removal of excess soil is included in the scope

The above arrangements shall be provided with heavy duty Chamber of 5000 kg load bearing capacity to ensure that safety of earthing system

SITC of following size test link 25 x 3 mm GI

Earthing Continuity Conductors -25 x 3mm Tinned copper

Providing and fixing stainless steel railing with stainless steel 304 post of 5mm thick S.S.post shaped as shown in the drawing and fixing 25mm dia S.S. pipe in the precut holes in the post and 75mm diaS.S. pipe handrail fixed at top with 3mm plate welded to s.s.post including handrail fixed at top with 3mm plate welded to s.s. post including proper cutting welding anchoring fixing of post to the treads of staircase, required machinery labour etc. complete as specified and directed.

Cutting down masonry work in lime or cement mortar including plaster etc. complete.

Providing and applying 20 mm thick plaster with cement mortar (1:3) on brick work in sub-structure including providing water proofing compound to the first coat of plaster as per manufacturers specification, racking out joints, hacking of concrete surface, finishing, curing, scaffolding, etc complete as directed By Engineer In Charge, as per Technical Specifications

P/F 18 mm thick granite

G.I. Cable tray with all other accessories 150 x 25mm (W x H) - (16 SWG - 1.6mm) without cover

Less : Rebate on Escalator (8.7 MTR)

Less : Rebate on Escalator (5.7 MTR)

CSMC charges for 1st yr after DLP Period for escalate of height 8.7 Mtr

CSMC charges for 2nd yr after DLP Period for escalate of height 8.7 Mtr

CSMC charges for 1st yr after DLP Period for escalate of height 5.7 Mtr

CSMC charges for 2nd yr after DLP Period for escalate of height 5.7 Mtr

ADITI ENTERPRISES (BID ID -6341159)

MR. JOHNVESLI AAD VANAFAGLU (BID ID -6331228)