PROVN OF OPEN SHED WITH INTERNAL ELECTRIFICATION AT TRG AREA ADDL TPS OF TRG BN-2 (DIGHI) BEG AND C UNDER GE(C) KIRKEE

Amount

Excavating in post holes in soft/disintegerated rock each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,watering and removing surplus soil to a distance n exc 50 m and making good complete all as specified and as directed.

M&L for Rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe 410-W(Gde E250)quality A complete all as specified and as directed.

M&L for rolled mild steel sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, including flat iron wind tie etc. Fe 410-W(Gde E250)quality A complete all as specified and as directed.

M&L for preparation of new steel surface of any description not otherwise described over 10 cm width or girth and applying, two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and as directed.

M&L for 0.8 mm pre-painted galvanised corrugated mild steel sheeting with two corrugation side lap, fixed with coach screws and washers, in roofs, walls etc with grade of zink coating 275 fixed with L type or J type or cranked hook bolts in lieu of screws complete all as specified and as directed

M&L for 0.8mm thick pre-painted plain, galvanised mild steel sheeting, in ridges, hips, valley gutters, drip & straight flashings (length and girth S fixed with grade of zink coating 275 complete all as specified and as directed

S&F in repair PVC (SWR) pipes, single socketed, in length with rubber rings 110 mm dia provided around top of peripheri of shed and long vertical post complete all as specified and as directed.

M&L for block masonry with solid blocks of precast cement concrete class designation C-5 (using 20mm graded stone aggregate), exc 10cm in width and setting in cement mortar (1:6) complete all as specified and as directed.

M&L for rendering 10 mm thick in CM (1:4) on surfaces of walls of block masonery finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of new plastred/concrete surface of walls and applying three coats of white wash complete all as specified and as directed.

Supply, laying and testing LT UG cable XLPE insulated screened pvc bedded galvanised steel strip armoured electric power cable (heavy duty )1100 volts (Earthed) grade with stranded aluminium conductor of size 2 core 10 sq mm complete all as specified and as directed.

Excavation in trenches n. exc 1.5 m wide and n. exc 1.5 mtr depth n exc 10 sqm on plan for laying of UG cable getting out in Soft/ loose soil complete all as specified and as directed.

Excavation in trenches n. exc 1.5 m wide and n. exc 1.5 mtr depth n exc 10 sqm on plan for laying of UG cable getting out in Soft disintegrated rock. complete all as specified and as directed.

Returning filling in including spreading, levelling, watering and well ramming in layers n.exc. 25cm in soils complete all as specified and as directed.

Removing excavated material( soil) to a distance not exceeding 50mtr and depositing where directed at a level not exceeding 1.5mtr above the starting point complete all as specified and as directed.

M&L for dry river sand cushioning to under ground cable in trenches including spreading levelling hand punning and consolidating complete all as specified and directed (Note: Thickness after punning down shall be measured and paid)

M&L for brick protection with sub class 'B' brick for UG cable laid in trenches complete all as specified and as directed.

M &L GI pipe light grade for protection of cable laid under floor, clamped on wall,laid under road cross etc of bore 40 mm complete all as specified and as directed.

M & L for surface point wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm (Nominal area) drawn in and including PVC casing caping/PVC conduit of required size with all fittings and accessories fixed on trusses/pipe with suitable clamps alongwith one single core green colour PVC insulated 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly for one light point or one fan point or one call bell point controlled by one, one way switch including PVC switch board of required size for mounting of switch, regulators or bell push and casing caping terminal box for mounting ceiling rose/ holders etc all as specified and directed.

M & L for surface point wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm (Nominal area) drawn in and including PVC casing caping/PVC conduit of required size with all fittings and accessories fixed on trusses/pipe with suitable clamps alongwith one single core green colour PVC insulated 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly for one 5 amps socket point independent including PVC switch board of required size or 3mm thick hylam sheet screwed with 04 nos cadmium coated screws & cup washer for mounting of switch, sockets etc all as specified and directed. .

M & L for surface point wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm (Nominal area) drawn in and including PVC casing caping/PVC conduit of required size with all fittings and accessories fixed on trusses/pipe with suitable clamps alongwith one single core green colour PVC insulated 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly for one 5 amps socket point on same board with other switches all as specified and directed.

M & L for surface point wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 2.5 sqmm (Nominal area) drawn in and including PVC casing caping of required size with all fittings and accessories fixed on trusses/pipe with suitable clamps alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 2.5 sqmm as earth lead and connected to earth dolly for one 16amps socket (Power) point independent including PVC switch board of required size or 3mm thick hylam sheet screwed with 04 nos cadmium coated screws & cup washer for mounting of switch, socket all as specified and directed.

S&F 5 Amp switch piano type single pole one way complete all as specified and as directed.

S&F socket flush type 6 amps, 5 pin, 230v complete all as specified and as directed.

S&F switch socket combination multipurpose 2-in-1 flush type 3 pin 16 amps and 3 pin 6 amps, 230v complete all as specified and as directed.

S&F ceiling rose surface Bakelite three terminal complete all as specified and as directed.

S&F flush type electronic fan regulator with 5 step type,100 W, AC 240 Volts, 50 Hz complete all as specified and as directed.

S&F MCB distribution board, IP 43 protection, Double door, metal enclosure, SPN, 230 Volts, 8 way all as specified and directed. MAKE- Cat Part No-5076 11 of Legrand or equivalent of Schneider/ABB as approved by GE

&F MCB, Single Pole, 6 to 32 amps, 240 Volts, 10 KA breaking cap, ‘’C” curve all as specified and directed. MAKE- Cat Part No- A9N1P06C to A9N1P32C of Schneider or equivalent of Legrand/ABB as approved by GE

S&F MCB, Single Pole and neutral, 6 to 32 amps, 240 Volts, 10 KA breaking cap, ‘’C” curve all as specified and directed. MAKE- Cat Part No- 4086-9 to 4086-17 of legrand or equivalent of Schneider/ABB as approved by GE

S&F lamp Holder insulated body with back plate for batten fitting complete all as specified and as directed.

S&F LED lamp 12 watt, CDL, B-22 cap, (Pin type), 230V, PF-0.95 (min) . complete all as specified and as directed. Make-HPL/Havells/CG/Bajaj/ Philips as approved by GE

Supply and fix ceiling fan including suitable fan rod with suitable clamp,Fan hook, nut, bolt & washers with existing fan hook/box, 1200 mm (48") sweep and connecitng up complete with and including three core copper conductor flexible cord of 0.5 sqmm cross sectional area of required length from ceiling rose to porcelain connector block of fan complete all as specified and directed.

S&F LED Tube light fitting, 18 watt, CDL, 230 Volts, 4 feet long ,Trim Linea complete with all accssories internally pre wired and including connecting up to ceiling rose with 0.5 sqmm twin core copper flexible conductor cable incl LED lamp and mounting casing box 2 nos+E12 any type all as specified and directed. Make-crompton Cat Part No LCTL-18-CDL or equivalemt in Bajaj/Philips as approved by GE.

S&F LED building security light 25 watt, 230V complete with all accessories and including connecting up to ceiling rose with 0.5 sqmm three core copper flexible conductor cable, One GI medium grade 25mm dia bracket of total length 80 cm and fixed to wall with 2 Nos MS Clamp and fastener all as specified and directed. Make-crompton cat part no.LSTS-25-CDL or equivalent in Philips/Bajaj as approved by GE.

M & L for Earthing complete with galvanised steel pipe electrode, 40mm bore, medium grade, 6 mtr long buried directly and vertically in ground with top edge at ground level after making bore hole of size not less than 300 mm dia and 6.0 Mtr long using suitable mechanical drilling rig (for drilling near the specified bldg), connected with galvanised steel earthing lead of 4mm dia all as shown in Plate No-2, connected to the earthing test point, concrete pit in PCC 1:3:6 type C-2with RCC precast pit cover slab 400mmx400mmx80mm with handle for lifting made out of 8mm dia MS rod, funnel, wiremesh, 15 mm dia light grade GI tubing for protection of GI wire 4mm dia, charcoal and salt in alternate 150mm thick layers around GI earth pipe, including necessary returning filling in & removal all as specified or indicated in SSR Part-I, including testing to achieve earth resistance value as per IS specification on completion.

MANIYA CONSTRUCTION CO.

greenstone construction

GGS Infra

S.R.M.K Enterprises

Mahindra Electric Stores