COMPREHENSIVE B/R REPAIRS LIKE JOINERY EXTERNAL PLASTERING SANITARY AND PLUMBING FLOORING ETC IN MD/ OTM ACCN AT MARGAO UNDER GE PANAJI GOA

Amount

Taking down chowkhats or frame with shutter (without taking off shutter from the frame) area not exceeding 1.5 Sqm each complete all as specified and as directed.

Taking down chowkhats or frame with shutter (without taking off shutter from the frame) area exceeding 1.5 Sqm but not exceeding 4 sqm each complete all as specified and as directed.

Taking down shutter of any description not exceeding 1 sq.m each complete all as specified and as directed.

Taking down shutter of any descriptions exceeding 1 Sq.m and not exceeding 2 sq.m each complete all as specified and as directed.

Material and labour for refixing existing shutter of any descriptions exceeding 1 Sq.m each in the same opening complete all as specified and as directed.

Material and labour for refixing existing shutter of any descriptions exceeding 1 Sq.m and not exceeding 2 sq.m each in the same opening complete all as specified and as directed.

Supply and fix2nd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints etc complete all as specified and as directed.

Supply and fix 35mm thick, 2nd class hard wood, kiln seasoned, chemically pressure treated, rail and style, factory made plain framed panelled shutter (two panels) with lock rail and panel of 9mm thick BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces. The size of the rail and stile as per IS: 1003 (Part-I), complete all as specified and as directed.

Supply and fix 35mm thick, 2nd class hard wood, kiln seasoned, chemically pressure treated, factory made, glazed and skeleton door shutters open rebated and prepared to receive glass or gauge etc divided into square with framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass or gauges etc sizes of members of shutters as specified in SSR Part-I Section 8 clause 8.24 (a) complete all as specified and as directed.

Supply and fix 30mm thick, 2nd class hard wood, kiln seasoned, chemically pressure treated, factory made, glazed and skeleton window shutters open rebated and prepared to receive glass or gauge etc divided into square with framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass or gauges etc sizes of members of shutters as specified in SSR Part-I Section 8 clause 8.24 (b) complete all as specified and as directed.

Supply and fix solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube supplying and fixing in opening as per specification and drawing complete all as specified and as directed.

Supply and fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement supplying and fixing in the frame at site as per specification and drawing complete all as specified and as directed.

Supply and fix powder coated aluminium grills DG 104 of Deco Grill/ hindal 10mm thick diamond shape with aperture 7.5cm for window openings fixed with powder coated aluminium ‘F’ frame complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and as directed.

Supply and fix mild steel frame work such as grills gratings etc, with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, and similar work confirming to Fe 290,Gde E165complete all as specified and as directed.

Supply and fix 140mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed.

Supply and fix 300mm, mild steel, ordinary rat tail rod pattern springs including roller and roller plate fixed complete all as specified and directed.

Supply and fix mild steel flat iron hold fast 25 x 6mm confirming to Fe 290 Gde E-165 complete all as specified and as directed.

Material and labour for PCC 1:2:4 type B-0 (12.50mm graded crushed stone aggregates) as in anchoring hold fast, bed plate and benching for manholes etc, complete all as specified and as directed.

Cutting holes in brick walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required, depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall exceeding half brick thick but not exceeding one brick complete all as specified and as directed.

Cutting out old bricks or stone masonry walls built in cement or lime mortar, forming toothing for and bonding new into old work in cement mortar 1:6 including jointing, pointing and making good after fixing of doors and windows or other similar work complete all as specified and as directed.

Material and labour for preparation and treating ends of posts, back of chowkats etc area of tarred exceeding 0.10 Sqm but not exceeding 0.50 Sqm complete all as specified and as directed.

Material and labour for preparation and treating small articles, area tarred not exceeding 0.10 Sqm each such as hold fasts end of posts, back of chowkhats complete all as specified and as directed.

Supply and fix150mm long aluminiumanodised, barrel tower bolts of extruded section, and fixed complete all as specified and as directed.

Supply and fix100mm long aluminiumanodised, barrel tower bolts of extruded section, and fixed complete all as specified and as directed.

Supply and fix 100 mm long butt hinges, extruded aluminium alloy with galvanized mild steel hinge pin anodized and fixed, type B-21 complete all as specified and directed.

Supply and fix 125mm long butt hinges, extruded aluminium alloy with galvanized mild steel hinge pin anodized and fixed, type B-21 complete all as specified and directed.

Supply and fix150mm size extruded aluminiumalloy handles, fabricated type, anodised complete all as specified and as directed.

Supply and fix100mm size extruded aluminiumalloy handles, fabricated type, anodised complete all as specified and as directed.

Supply and fixing 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

Supply and fix aluminium alloy wire cloth 0.45 mm nominal dia. of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples/ wooden beads in repairs to existing shutter of any description complete all as specified and directed.

Supply and fixgalvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed in repair with tinned tracks, or galvanised wire staples complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with oil putty or fixed with beads.

Supply and fix 4mm thick sheet glass ordinary quality and glazing with oil putty of fixed with beads in square not exceeding 0.5 sqm each pane complete all as directed.

Supply and fix4mm thick sheet glass ordinary quality and glazing with oil putty of fixed with beads in square exceeding 0.5 sqm each pane complete all as directed.

Supply and fix 4 mm thick figured glass pin head type glazed with oil putty in square not exceeding 0.5 sqm in each pane complete all as directed.

Material and labour for applying two coatsof synthetic enamelled paint over a coat of pink primer including preparation of new wooden surfaces of any description not otherwise described over 10cm width or girth complete all as specified and as directed.

Material and labour for applying one coat(finishing coat) of synthetic enamelled paintincluding preparation of old painted wooden surface of any description not otherwise described over 10cm width or girth complete all as specified and as directed.

Material and labour for applying two coats of synthetic enamelled paint over a coat of red oxide primer including preparation of new steel surfaces of any description not otherwise described over 10cm width or girth complete all as specified and as directed.

Material and labour for applying one coat (finishing coat) of synthetic enamelpaint including preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girthcomplete all as specified and as directed.

Material and labour for 15mm thick rendering in cement mortar 1:6 on fair faces of bricks or concrete or stone surfaces of walls finished even and smooth without using extra cement complete all as specified and as directed.

Material and labourfor applying two coats of weather proof acrylic emulsion Ist quality exterior paint over a coat of weather proof acrylic emulsion exterior primer including preparation of new surface complete all as specified and as directed.

Material and labour for applying two coat of oil emulsion distemper over a coat of chalk whiting including preparation of new plastered surfaces of wall complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing and rubbish off the premises complete all as specified and as directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed.

Demolition of reinforced cement concrete of any description (reinforcement cut as required to facilitate demolition) and in any position, above or below ground floors, not otherwise specifically provided for complete all as specified and as directed.

Material and labour for coloured ceramic glazed tiles of size 350x250x7mm thick on vertical surface of wall, over and including 10mm thick backing coat in cement mortar 1:4, set and jointed in white or coloured cement slurry and pointed in epoxy mortar to match the shade of tiles complete all as specified and as directed.

Material and labour for coloured non skid ceramic tile 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.38sqm, in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface, including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

Material and labour for coloured non skid ceramic tile 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06sqm but not exceeding 0.11sqm, in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface, including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

Material and labour for 25mm thick granite stone (of any type) machine cut, as in floors or window slabs, steps, jambs, pillars, window cills, cooking platform etc laid over cement screed bed in cement mortar 1:4 ,15mm thick, laid and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding ,polishing, etc complete all as specified and as directed.

Material and labour for rounding to edges of granite or stone slabs on one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

Material and labour for treating and finishing the sunken portion of WC area not exceeding 1.20 sqm each by providing 10mm thick rendering in cement mortar 1:3 mixed with and including water proofing compound and applying two coat of bitumen, providing necessary connected items suitable for WC, like floor trap, P trap, S trap, Nahani trap etc including waste PVC (SWR) pipe 75mm dia or above up to 110 mm dia with cement or lime concrete and 1mm thick multiplies plastic felt over 20mm thick plain cement concrete 1:2:4 type B0 using 12.5mm graded crushed trap stone aggregate complete all as specified and as directed. (WC & WPC will be measured and paid separately)

Supply and fix vitreous china squatting pan of Orissa pattern of size 580mm x 440mm white with integral foot rest and ‘P’ or ‘S’ trap connection to trap and to flushing pipe front or back inlet including, trap and set in and including provision of lime concrete bedding taking out old WC and connections etc. complete all as specified and as directed.

Taking down cement plaster of any description, thickness including raking out joints hacking for key scrubbing down with water complete all as specified and as directed.

Material and labour for rendering 15mm thick internal plaster in cement mortar 1:6 on fair faces of bricks or concrete surfaces of walls finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for applying two coats of oil bond distemper over a coat of white or tinted including chalk whiting including preparation of new plastered surface of wall and complete all as specified and as directed.

Material and labour for applying two coat of oil emulsion distemper over 3mm thick wall care putty on old decorated surface of walls including complete removal of existing treatment.

Material and labour for applying three coat of white wash on old decorated surface of walls including preparation of surfaces by brooming down or steel wire brushing, scraping down with steel scraper, smoke soot, moulds moss and efflorescent slats, trading oil and greasy spots etc complete.

Supply and fix 32mm dia1.20mtr long flexible PVC waste pipe for WHB and sink complete all as specified and as directed.

Supply and fix in repair PVC connection 15mm bore size with PTMT nuts of length 600mm complete all as specified and as directed.

Supply and fix in repair 150 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

Supply and fix 150mm dia PVC (SWR) Bend complete all as specified and as directed.

Supply and fix grating round 150 mm dia with waste hole of PTMT. (Minimum weight 40gms) fixed in repairs complete all as specified and as directed.

Material and labour for 40mm thick plain cement concrete 1:2:4 type B-1 using 20mm graded crushed trap stone aggregate as in flooring complete all as specified and as directed.

Taking up or down 15mm bore steel water tubing and connections complete all as specified and as directed.

Taking up or down 20mm bore steel water tubing and connections complete all as specified and as directed.

Supply and fix in repairs 15mm bore dia unplasticized PVC pipes of high pressure rating 10kgf/sq.cm etc all as specified and directed.

Supply and fix in repairs 20mm bore dia unplasticized PVC pipes of high pressure rating 10kgf/sq.cm etc all as specified and directed.

M&L for reinforced cement concrete 1:2:4 type B1 (Normal mix) using 20mm graded crushed stone aggregate as in slabs supported on wall, beams, floors, roof, deck slabs and shelves, etc and similar work complete all as specified and directed.

Rough finished flat from work to slabs supported wall, beam, roof, deck slab and shelves, chajja, etc complete all as specified and directed.

Material and labour for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Material and labour for mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Supply only integral water proofing compound.

VXL AND COMPANY