GE/BAS-53/2024-25 PROVN OF TOILET NEAR BLDG NO ET-4A AND STAFF TOILET NEAR BLDG NO P-179 AND SPECIAL REPAIR TO MD ACCN P-58 AND ADDN/ALTN TO FENCING NEAR APS AT MADHOPUR UNDER GE BASOLI

Amount

Excavation in trenches n exc 1.5 m wide and nexc 1.5 m in depth for foundation of pole/stay and laying of UG cable/GI pipe and getting out in any type of soil complete all as specified and directed.

M&L returning, filling and including spreading, levelling , watering and well ramming in layers not exceeding 25 cm complete all as specified and directed.

Removing excavated material nexc 50m and depositing where directed at a level nexc 1.5mtr above the starting point , complete all as specified and directed.

Surface excavation not exc 30cm deep and averaging 15cm deep and gettingout in any type of soil complete all as specified and directed.

M&L Reinforced cement concrete M-25 (Design mix) using 20mm graded crushed stone aggregates as in foundations, including rafts, footings, foundation beams, plinth beams, bases of columns etc basement slabs, under-reamed piles and mass concrete complete all as specified and directed

M&L Reinforced cement concrete M-25 (Design mix) using 20mm graded crushed stone aggregates as in slabs, supported on walls, beam and columns in floors, and in shelves and the like complete all as specified and directed.

M&L Reinforced cement concrete M-25 (Design mix) using 20mm graded crushed stone aggregates as in columns, pillars, piers, posts and struts complete all as specified and directed.

M&L Reinforced cement concrete M-25 (Design mix) using 20mm graded crushed stone aggregates as in beams, chajja, cantilevers, bressummers, lintels over 1.5 mtr span complete all as specified and directed.

Steel Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and sofits of foundation and plinth beams; and similar works; vertical or to batter for rough finished flat surfaces complete all as specified and directed.

Steel Form work to sides and soffits of floor/roof beam for rough finished flat surfaces of concrete complete all as specified and directed

Steel Form work to sides of pillars, posts, struts, piers, columns and stanchions for rough finished flat surfaces of concrete complete all as specified and directed

Steel Form work to soffits of suspended slabs such as roof slabs, floor slabs etc not exceeding 200mm thick complete all as specified and directed.

M&L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

-ditto- here-in-before but 8mm dia and over upto and including 10mm dia as in stirrups, spacers, binders complete all as specified and directed.

Taking down chowkats or frames with shutter (without taking off shutter from the frames) n. exc 1.50 Sqm each complete all as specified and directed .

Taking down chowkats or frames with shutter (without taking off shutter from the frames) exc. 1.50 Sqm n.exc 4 Sqm each complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.

S&F Solid PVC door frame (single rebated) of size 60mmx30mm made out of solid PVC frame with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100x8 sheet metal CSK screws complete all as specified and directed.

S&F Factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2,4 or 6 raised panel design with 2mm thick moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing.complete all as specified and directed.

S&F factory made single piece solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for style and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement supply & fixing in the frame at site complete all as specified and directed.

M&L for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete of frame size 105 x 60 mm complete all as specified and directed .

M&L for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete of frame size 125 x 60 mm complete all as specified and directed .

M&L for providing cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates for filling in the pressed steel door frame/hold fast complete all as specified and directed .

S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed .

S&F For Glazed and skelton shutters 35mm thick of 2nd class HW open rebated and prepared to receive glass or wire gauze etc. shutters divided in square with sash bars, size of members of shutters as specified in SSR Part-1, secton 8, clause 8.20(a) complete all as specified and directed.

S&F Powder Coating (min thickness of powder coating 50 micron) aluminium frame for door, windows, ventilators with one or more rebates including joining cleat for fixing etc, Complete all as specified and directed.

S&F for powder coating aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections as mentioned below weighing 0.55 kg/m and glazed/ gauged with glass pans/ stainless steel fly proofing including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinges type B-21 100mm long (2 no.) American suitable handle (1 no.) of size 75mm, tower bolt 100mm long(2 Nos) etc complete all as specified. size of rail and style 83-84mm/ 44-45mm complete all as specified and directed .

S&F Galvanised MS wire cloth 0.46mm nominal dia of wire and average width of aperture 1.18mm, complete all as specified and directed.

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

S&F sheet glass ordinary quality 3mm thick (Figured) with oil putty in area n.exc 0.5 Sqm in each panebut figured pin headed glass complete all as specified and directed.

S&F for 100 mm butt hinges,Stainless steel complete all as specified and directed complete all as specified and directed.

S&F aluminium anodised barrel tower bolt of extruded section 150 mm long complete all as specified and directed.

S&F aluminium anodised barrel tower bolt of extruded section 200 mm long complete all as specified and directed.

S&F aluminium handle, cast type, anodised ,125 mm size. complete all as specified and directed

S&F aluminium handle, cast type, anodised ,150 mm size. complete all as specified and directed

S&F aluminium alloy , anodised ,sliding door with hasp and size 300mm long with hasp, staples and fixing clips of sheet extruded section and fixing bolts of extruded section complete all as specified and directed .

M&L for preparation of treated/un-treated steel surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed .

M&L for preparation of treated/un-treated wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed .

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including Dismantling asbestos cement (corrugated, semi corrugated etc sheets in roof covering complete all as specified and directed .

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including Dismantling asbestos cement (corrugated, semi corrugated etc sheets in roof covering complete all as specified and directed .

M&L Box type steel windows and ventilator comprised of tubular frame and shutters made out of 1.25mm thick MS Sheet tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire cloth and glass panes only shall be measured and paid seperately) with side hung shutters with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 150mm long for each leaf and 10mm square bar grills at spacing shown on drg welded to GI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC blocks etc all as shown on drg No CEPZ/TD-354/09 sheet 1/3 to 3/3 including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of old steel surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed .

Material and labour for plain cement concrete type B-1 1:2:4 (20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones, bed plates, kerbs ,water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

M&L for roof treatment with the following specicification - (a)20mm thick rendering in CM 1:4 with WPC @3% by weight of cement (b) applying evenly one coat of blown hot bitumen of grade 85/25 @ 1.2 kg per sqm on primed surfaces. (e) Applying a layer of APP based polymeric membrane 3mm thick (minimum) weighting 3.6 kg per sqm (reinforced) with polyster Non woven fabric weighing not less than 160 gms per sqm top of membrane with granular finish. The overlap shall be minimum 100mm on transverse direction and 150 mm on longitudinal direction and sealing overlap by torch application complete all as specified and directed.

M&L for roof treatment with the following specification - Removing existing water proofing treatment and applying water proofing treatment on horizontal or vertical surfaces by applying oil bound bitumen primer @ 0.20 Kg/sqm and providing 3mm thick APP modified water proofing membrane weighing not less than 3 Kg/sqm reinforced with non-woven polyester matt weighing not less than 160 gm/sqm, The overlap shall be minimum 100mm on transverse direction and 75 mm on longitudinal direction and sealing overlap by torch application and bonded and applying a coat of blown grade hot bitumen 85/25 over and below the membrane @ 1.20 Kg/sqm in drying over the membrane and Preparation of Roof Surfaces and two coat of Aluminium Paint on APP Membrane finished complete all as specified and directed. NOTE :- The work shall be executed at site by the authorised applicator of APP and as approved by the GE.

M&L for cement concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) , top surface of plain concrete padding shall be finished even & fair w/o using extra cement.complete all as specified and directed

M&L For 15mm thick screed in CM 1:4 in at Roof Top Surfaces for smoothening surface of laying APP Membrane and all as specified and as directed.

Supply and fixing for 18 to 20mm thick (weight not less than 10.5 Kg/Sqm) PVC Unltra Violet chemical, glosymate finish 100% termite/water proof, fire retrandent eco friendly solid board both side decorative choice laminate as in kitchen cabinet, loft cupboard etc fixed with screws to steel/ timber frame work etc complete all as specified and directed by Engineer-in-Charge.

S&F Brass knobs 35-40mm dia complete all as specified and directed

S&F magenatic catcher complete all as specified and directed

S & F drawer rooler channel with wheel complete all as specified and directed

S & F continiuous (piano) hinges, mild steel, bright finish or electro galvanised width of flaps (when open) in 30mm complete all as specified and directed by Engineer-in-Charge.

Dismantling of PVC or cast iron pipes jointed in cement mortar and taking out upto 110 mm.complete all as specified and directed.

S&F 110 mm bore PVC (SWR) Pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and directed.

S&F 75 mm bore PVC (SWR) Pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and directed.

S&F PVC (SWR) Bends in any radius 110 mm bore with access door in repair complete all as specified and directed.

S&F PVC (SWR) Bends in any radius 75 mm bore with access door in repair complete all as specified and directed.

S&F in repairs for 75mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed

M&L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

S&F PVC (SWR) Vent cowl 75 mm bore in repair complete all as specified and directed.

S&F PVC (SWR) 110/75 reducer in repair complete all as specified and directed.

S&F PVC (SWR) double junction T of size 110mm in repair complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for. complete all as specified and directed.

S&F Rolled sections as in main and cross beam, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plate using Fe 410-W (Gde E-250) quality'A'., complete all as specified and directed.

Erection fixing only Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates using FE 410-W (Gde-E-250) Quality A incl a coat of red oxide and applying two coat of synthetic enamel paint complete all as specified and directed.

Dismantling of water tank any capacity/type complete all as specified and directed.

M&L for Rotational moulded polyethylene water storage tank 3 layer white colour water tank , non- toxic effect, algea formation protection (made from Virgin grade of polyetylene material which is duly stablized with anti-oxidentPlastic) of capacity 1000 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer, 20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc complete all as specified and directed.

M&L for Rotational moulded polyethylene water storage tank 3 layer white colour water tank , non- toxic effect, algea formation protection (made from Virgin grade of polyetylene material which is duly stablized with anti-oxidentPlastic) of capacity 500 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc complete all as specified and directed.

S&F 15mm bore chromium plated cast copper alloy bib taps fancy type long body with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule all complete all as specified and directed.

S&F Central Hole Basin Mixer without Popup Waste System with 450mm Long Braided Hoses complete all as specified and directed.

S&F in repair 15mm Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed.

S&F in repair 15mm Brass CP sink mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed.

S&F PTMT grating dome 100 mm dia (minimum weight 25 gms) complete all as specified and directed

S&F in repair brass chromium plated tubular towel rails 20mm dia D type 60cm long between flanges complete all as specified and directed.

S&F in repair Stainless Steel 0.90mm thick sheet. plate rack of size 750mm x 900mm x 250mm complete all as specified and directed

S&F in repair Sink with drainage board made of stainless steel 0.9 mm thick kitchen or labourator with plug washers,and waste pipe, incl bedding in CM to drwaf wall or incl fixing cantilever brackets and conecting union to pipe over all size 915mmx450mm bowl size 410mm x 330mm x 160mm.complete all as specified and directed. Cera Cat Part No: DIANA LITE B4622101- Gloss finish or equivalent in Jaquar/Prayag/Kohler.

S & F vitreous China wash down water closet pan (Pedestal pattern), white (EWC) with ‘P’ or ‘S’ trap, including connection to drain or outgoing pipe and including with 10 ltr capacity PVC flushing cistern, including brackets for flush tank, PVC connection 450mm long and 15mm dia to flushing cistern/ sanitary fittings with PTMT nuts of length 450mm and all necessary fittings, inlet, outlet pipe connections, and plastic water closet seat cover, 15mm dia health faucet, closed pattern with recessed bottom cover and mild steel chromium plated hinge complete all as specified and directed.

S&F under counter basin white colour with fixing accessories set, size: 560 x 470x190, Oval shape, including CP Waste Coupling and PVC waste pipe complete all as specified and directed.

S&F vitreous china wash hand basin white Oval shape of Size 550 mm dia including supply of pedestal,bracket, cutting for and pinning the ends of brackets or erecting stands , waste pipe and including brass chromium plated waste coupling with long screwed shank, 15mm CP pillar tap fancy type and fly nuts complete all as specified and directed.

S&F in repair flushing cistern with 10 ltrs discharge capacity PVC flushing cistern low level with inlet ball valve etc.complete all as specified and directed

S&F Towel Ring of CP fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

S&F stainless steel Liquid Soap Dispenser with Push type Mechanism fixed to wall with flange complete all as specified and directed. Make :- CERA /Jaquar/hindware/Jainko/Essco

S&F Vitreous China urinals, bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plug, incl push type stop cock, Urinal spreader bedding urinal against wall in cement mortar 1:2 securing urinal to plug with and including 60mm long brass screws, pointing around urinal back in cement; fixing with brackets, flush pipe, grating and Union for discharge pipe. complete all as specified and directed.

S & F in repair Vitreous China squatting pan “Orissa pattern” size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) with CI ‘P’ trap of long arm of suitable size including connection to flush pipe, anti symphonic pipes etc, complete all as specified and directed.

Taking up or down 15/20mm bore steel water tubing and connections complete all as specified and directed

S&F of 15mm dia bore steel water GI tubes medium grade with all fittings and fixed cocealed to walls, ceilings or laid in floors complete including cutting/chiesling of brick/concrete surface and making good as per existing complete all as specified and directed

S&F of 20mm dia bore steel water GI tubes medium grade with all fittings and fixed cocealed to walls, ceilings or laid in floors complete including cutting/chiesling of brick/concrete surface and making good as per existing complete all as specified and directed

Refixing with new fitting 15mm dia bore steel water GI tubes medium grade with all fittings and fixed cocealed to walls, ceilings or laid in floors complete complete all as specified and directed

Refixing with new fitting 20mm dia bore steel water GI tubes medium grade with all fittings and fixed cocealed to walls, ceilings or laid in floors complete complete all as specified and directed

S&F in repair curtain rod aluminium alloy tubular with fixing brackets, stop etc. complete all as specified and as directed.

Demolition cement concrete unreinforced of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L 80mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern ,of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand completed all as specified and as directed.

M&L 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 25mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand completed all as specified and as directed.

M&L for 75 mm thick PCC type D-2, 1:4:8 (40mm graded stone aggregate) as in sub base complete all as specified and directed .

M&L for 100 mm thick PCC type D-2, 1:4:8 (40mm graded stone aggregate) as in sub base complete all as specified and directed .

Rammed earth filling under floor including Spreading and levelling in layers n exc. 25 cm thick and watering and well ramming complete all as specified and directed.

M&L Hardcore of broken stone or boulders of gauge n. exc. 63mm, deposited spread and levelled in layers n. exc. 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed.

M&L for 10mm thick rendering/screeding on fair faces of brick / concrete surfaces in cement mortar 1:4 and finished even and fair for receiving tiles complete all as specified and directed .

S&F Vitrified Ceramic in dark shade tiles 9-10 mm thick (square/ rectangular) polished, size of tile 600 x 600mm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and brushing neat cement slurry with 3 kg of cement per sqm and Screed bed or bedding layer 15mm thick in CM 1:4 for laying floor finishes. Complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L Glazed ceramic tiles in vertical surface 350x250mmx7mm/450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and directed.

M&L Non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed ..

M&L Granite Black Colour of any type 20mm thick machine cut as in cooking plateforms and over 20 mm screed bed in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L Granite Black Colour of any type 20mm thick machine cut as in pillar and like incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Rounding/moulding to edges of stone slabs, marble stone, granite stone slabs one edge, such as in steps, cooding platform and other similar situations etc complete all as specified and directed.

M&L for rendering 10mm thick in cement mortar 1:6, on fair faces of brick work or concrete surfaces , finished even and smooth without using extra cement, preparation of new plastered surfaces of walls and applying 1mm thick wall care putty and two coat oil emulsion distemper on walls complete all as specified and directed .

M&L for rendering 10mm thick in cement mortar 1:6, on fair faces of brick work or concrete surfaces , finished even and smooth without using extra cement, preparation of new plastered surfaces of walls and applying three coats of white wash on walls complete all as specified and directed .

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed

M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius with old size bricks built in cement mortar 1:6 incl complete all as specified and directed

M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius with old size bricks built in cement mortar 1:4 incl complete all as specified and directed

M & L for Half thick Brick wall work curved on plan in any radius with old size bricks built in cement mortar 1:4 and external pointed flush in same mortar as the work proceeds. complete all as specified and directed.

S&F chromium plated PTMT shelves fixed with and including chromium plated brass screws and plastic cleats complete all as specified and directed

S&F 15 mm bore CP jet spray for Pedestal pattern WC complete all as specified and directed

S&F Fancy type health faucet with 8mm dia 1.25mtr long flexible tube (back flow preventer), chromium plated of 15mm bore, all as specified and directed. Make:Jaquar cat part No : ALD-579 or Cera cat part No : CG-105A

S&F stop/angle valve cast copper alloy chromium plated fancy type screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe. complete all as specified and directed .

S&F in repair stop/angle valve cast copper alloy chromium plated fancy type screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe. complete all as specified and directed .

S&F in repair long shank concealed type stop valve cast copper alloy chromium plated screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe. complete all as specified and directed .

S&F long shank concealed type stop valve cast copper alloy chromium plated screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe. complete all as specified and directed .

S&F chromium plated shower roses with or without swivel joints 125mm size including fixing to steel pipe or union complete all as specified and directed.

S&F CP Soap dish fancy type complete all as specified and directed.

S&F in repair Toilet paper Holder Chromimum Plated complete all as specified and directed.

S&F in position suspended false ceiling system using E-grid suspended ceiling grid system. The size of grid shall be 600x600mm with GI frame work main runner 38x24mm cross tee 25x24mm and wall angle 24mmx24mm using 9mm thick ceiling panel laminated wth PVC film on front face and foil back available in due drop texture as per IS- 2095 Part-I 1996 fixed in the grid of E grid suspended ceiling Grid system duly suspended by 4mm dia GI bar hangers from the purlins of the roof with butter fly clips. complete all as specified and directed

Dismantling of ceiling asbestos cement board any thickness including cover fillites.complete all as specified and directed.

M&L for concrete bed to drain pipes laid in trenches incl packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) for 150mm bore of pipe complete all as specified and directed

M&L for Reinforced concrete pipes150mm, class NP3, laid and jointed complete with collars bed complete incl testing all as specified (Concrete to be measured and paid for separately) complete all as specified and directed

M&L Cement concrete M-7.5 (Nominal mix),type D-2, 1:4:8, (using 40 mm graded crushed stone aggregates) in foundation filling and mass concrete, post holes etc complete all as specified and directed

Demolition of cement concrete reinforced in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed

Taking down cement plaster on brick or concrete surface including racking out joints hacking for key scrubbing down with water etc. complete all as specified and directed.

M&L Rendering 15mm thick on brick or concrete surface in CM 1:4, finished even and smooth with out using extra cement using WPC @ 200ml per bag of cement complete all as specified and directed. Note : WPC Shall be meaured and paid seperately.

M&L Preparation of new plastered surfaces and applying two coats exterior acrylic emulsion paint (Appx) on walls over a coat of primer complete all as specified and directed.

M&L Preparation of old plastered surfaces and applying two coats exterior acrylic emulsion paint (Appx) on walls complete all as specified and directed.

M&L PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in surface channels & drains,benching of manholes complete all as specified and directed.

M & L Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed

M&L 75 mm thick PCC, type C-2, 1:3:6, ( using 40mm graded crushed stone aggregate) as in plinth protection finishing the surface even and smooth without nusing extra cement. complete all as specified and directed

M&L for rendering 5 mm thick in CM (1:3) finished surface even and smooth w/o using extra cement in ceiling. and applying three coats of white wash on ceiling complete all as specified and directed

M&L for preperation of old plastered surface and applying two coats of white wash on ceiling complete all as specified and directed

Supply only liquid Water Proofing Compound. complete all as specified and directed

M&L for complete removal of existing surfaces of walls and applying 1mm thick wall care putty and two coat oil emulsion distemper on walls complete all as specified and directed .

Dismantling posts or struts Precast R.C.C.) any section, including taking out embedded portion of concrete and making good disturbed ground complete all as specified and directed

M&L Cement concrete M-10 (Nominal mix),type C-2, 1:3:6, (using 40 mm graded crushed stone aggregates) in foundation filling and mass concrete, post holes etc complete all as specified and directed

S&F MS works as in fencing posts and struts including cutting tops to bottom shape as directed, drilling holes notching for wire etc flat iron fillets for securing razor wire etc incl all drilling bolting riveting etc and similar works conforming to Fe- 290 gde E-165 complete all as specified and directed.

All as per item No 146 here-in-before, but fixing only

Supply only chain link fencing of oblong wire mesh size 50x50mm all as directed (Note- dia of main bar 4mm and cross bar 4mm ) complete all as specifed and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specifed and directed.

S&F Mild steel 10/12mm dia round bars as in strengthening of chain link fencing complete all as specified and directed.

S & F galvanised 2 strand steel barbed wire 2-24 mm dia barded with 2mm dia bar at 75 mm spacing and straining and fixing to any type of standard rail, standard bolts incl securing or tying at crossing with and provn of galcanized mild steel wire staple or steel pins (Each line of wire to be measured) complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed .

S&F MS framed work conforming to Gde Fe 410-W as in doors or gates of angle or other section with gussetplates ,rails ,braces .etc complete drilled for fixing of steel sheeting or other covering .Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting (exclusive steel sheeting) complete all as specified and directed.

M&L Preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and as directed.

S&F mild steel bolts, machine made, with hexagonal or square heads at one end and screwed the other end or screwed both end each screwed end to be fitted with washers and one hexagonal or square nut length bolt n exc 5cm and dia of neck 5 to 10mm complete all as specified and directed .

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm dia suspension wire, one twin core cable flat or circular of size 10 sqmm 2 core complete all as specified and directed.

Supply,laying and testing cable XLPE insulated,screened,PVC bedded galvanised steel strip or wire armoured,electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 Sqmm 4 core including takingout existing complete all as specified and directed..

Supply and fix for DWC high density polythylene pipes having dia 63/50 as per site requirement having corrugation on the wall and plain surface on the wall conforming to IS : 14930 (Part-I & II) for protection of underground cable laid along pole/along wall/in PCC on GL/roof and including all fitting as required complete all as specified and directed.

Cutting existing steel tubing for additional connection of size 20/25 mm pipe line complete all as specified and directed.

Suppy and fix gate valve 25mm dia gun metal gate valve conforming to IS with iron wheel head screwed both ends for iron pipe complete all as specified and directed..

Supply and laying in trenches galvanised steel tubings medium grade 25 mm bore with screwed and socket joints together with all galvanised steel fittings such as sockets, elbows, bends,tees, reducers, short pieces, unions, caps, plugs etc. incl clamps connection cutting screwing , drilling etc upto 100 mm dia pipe complete all as specified and directed.

Taking down copper/aluminum point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as per specified and directed.

Point wiring with 1.5 Sqmm FRLS, PVC insulated and unsheathed multi stranded flexible copper conductor cable in and incl rigid PVC conduit concealed medium grade with pressed mild steel terminal boxes(sheet not less than 1.6 mm thick) duly painted with a coat of red oxide primer with suitable thickness plastic laminated sheet cover 3mm thick of adequate size for one light or one fan controlled by one switch incl 1.5 Sqmm FRLS, PVC insulated and unsheathed multi stranded flexible copper conductor cable as earth wire(green colour) to common earth dolly complete all as specified and directed by Engr-in-charge.Note: a) Rate for cutting chases for conduits and sinking for boxes and making good to wall, floors deemed to be included in each point etc (b) On RCC roof ceiling PVC conduit shall be provided on surfaces for any necessary point with proper fixing clips and no extra cost shall be paid for the job etc complete all as per specified and directed.

Point wiring with 2.5 sqmm FRLS, PVC insulated and unsheathed multi stranded flexible copper conductor cable drawn in and including rigid PVC concealed conduit medium grade of suitable size with sunk cast iron/pressed steel terminal boxes(sheet not less than 1.6mm thick) of adequate size with suitable thickness plastic laminated sheet cover 3mm thick for one 3 pin socket outlet 15 Amp on independent board including continuous 2.5 sqmm FRLS,PVC insulated and unsheathed copper conductor cable (multistranded) as earth wire to common earth dolly, complete all as per specified and directed.

M&L for point wiring in repair for modular accessories with modular metal flush box and cover plate with frame of suitable size complete with 1.5 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS cable 1100 volts grade drawn through metallic rigid / PVC heavy duty concealed conduit/ for one light or one fan or bell point controlled by one switch with 1.5 sqmm, single core, PVC insulated but unsheathed multistranded copper conductor FRLS cable 1100 volts grade as earth continuity wire terminated in new modular sunken boxes and modular metal flush box as required size at site and all connected accessories , box made from not less than 1.6mm GI sheet factory made complete all as specified and directed by Eng-In-Charge. for the following. .. Note: a) Rate for cutting chases for conduits and sinking for boxes and making good to wall, floors deemed to be included in each point etc (b) On RCC roof ceiling PVC conduit shall be provided on surfaces for any necessary pointwith proper fixing clips and no extra cost shall be paid for the job etc all as directed. (c) Modular metal boxes and covers are measured and paid separetely.

All as per item No 164 but for one 3 pin 5 Amp socket outlet on independent board complete all as per specified and directed.

All as per item No 164 but for one 3 pin 5 Amp socket outlet on same board complete all as per specified and directed.

All as per item No 164 but for One light point controlled by two 2 - w a y. s w i t c h e s with cables 1.5 sq. mm1.5 sq. mm

Supplying & Fixing switch piano flush button single pole one way 5 amps 230 volts, complete all as per specified and directed.

Supplying & Fixing switch piano flush button single pole one way 15 amps 230 volts, complete all as per specified and directed.

S & F step type electronic fan regulator 5 steps, 120 W-2module suitable for 240 volt AC complete all as specified and directed.

Supplying & Fixing socket out let, 6 pin, 5 and 15 amps multi purpose 2 in 1 flush type, 230 volts, complete all as specified and directed

S&F modular switches 6 Amps single pole one way complete all as specified and directed

S&F modular switches 6 Amps single pole two way complete all as specified and directed

S&F modular socketes out let 6 Amps 5 pin complete all as specified and directed .

S&F modular switches 16 Amp single pole one way complete all as specified and directed

S&F modular socket out let 16 A pin combined shuttered complete all as specified and directed.

S&F modular white cover plate with frame 8 modular complete all as specifed and directed.

S&F modular white cover plate with frame 6 modular complete all as specifed and directed.

S&F modular white cover platewith frame 4 modular complete all as specifed and directed.

S&F modular white cover platewith frame 3 modular complete all as specifed and directed.

S&F modular white cover platewith frame 1 and 2 modular complete all as specifed and directed.

S&F Flash metal boxes 6 modular size 75 X 210 complete all as specifed and directed

S&F Flash metal boxes 4 modular size 75 X 105 complete all as specifed and directed

S&F Flash metal boxes 3 modular size 75 X 105 complete all as specifed and directed

S&F Flash metal boxes 1&2 modular size 75 X 105 complete all as specifed and directed

S&F modular Bell push, 6 Amp one way complete all as specifed and directed.

Supply and fixing musical door bell, AC 230 Volts single phase complete all as specified and as directed .

S&F Lamp holder, PVC/Polycarbonate type with back plate having matching colour to holder suitable for angle/batten fittings complete all as per specified and directed.

S&F ceiling rose surface bake lite two to three terminal isolated body fixed on PVC round block complete all as per specified and directed.

S&F 25 Watt LED street light/Bldg security light fitting of IP-66 protection, pressure die cast aluminum housing with epoxy powder coated finish having polycarbonate cover with all accessories pre-wired with and including medium grade GI pipe 40mm dia for bracket for fixing on pole/wall connecting with three core conductor cable of size 1.00 sqmm complete all as per specified and directed.

S&F in replacement LED 20 watt batten tube light fitting with polycarbonate diffuser, 4 feet fitting fixtures, complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size complete all as per specified and directed.

Supply and fixing in replacement of decorative LED wall light fitting suitable for 9 watt LED with 100 lumen/watt complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable from ceiling rose to terminal block and testing complete all as specified and directed . Note :- Rate of 9 watt LED bulb is deemed to be included in quoted rate.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed .

Supply and fixing wall mounted bulk head fitting, 10watt, warm white, 230volt, diffused optics etc complete with all accessories, connecting up with three core twisted flexible copper conductor from ceiling rose to fitting complete all as per specified and directed.

S&F in replacement sheet metal powder enclosure powder coated versatile double door single pole and neutral (SPN) 8 way fitted with copper bus bar rated 200 Amp (SPN) distribution board for MCB provisions 230Volt, 50Hz AC with neutral link , earth bar complete all as per specified and directed.

S&F in replacement sheet metal powder enclosure powder coated versatile double door single pole and neutral (SPN) 4 way fitted with copper bus bar rated 200 Amp (SPN) distribution board for MCB provisions 230Volt, 50Hz AC with neutral link , earth bar complete all as per specified and directed.

Supply and fixing Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole and neutral MCB 10 Amp complete all as per specified and directed.

Taking out old single phase energymeter any type any capacity conplete all as specified and directed.

Supply and fix electronic meters temper proof LCD display with polycarbonate cover 230 V, 10-60Amp, accuracy class-I 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time,current reading, load, PF, voltage and KWH complete all as specified and directed.

S&F MCB SPN 6-32 Amps with 10KA breaking capacity of c series in distribution board complete all as per specified and directed.

S&F MCB isolator SPN 40 Amps with 10KA breaking capacity of c series in distribution board complete all as per specified and directed.

S&F in replacement sheet metal powder coated VTPN DB double door 4 way with MCCB 100 Amps, 415 Volts, 50 Hz AC 16 KA, 4 pole with copper bus bar rated 200 amps neutral link, earth bar and din rail for fixing with the MCB,s complete all as specified and directed. Note :-MCCB Shall be measured and paid seperately in relevant item.

S&F in replacement MCCB TPN 100 Amps with 16KA breaking capacity in distribution boards complete all as specified and directed.

S&F MCB SP 6-32 Amps with 10KA breaking capacity of c series in distribution board complete all as per specified and directed.

S&F LED bulb of capacity 9 watt complete all as per specified and directed.

Supply and fixing of exhaust fan, steel body single body AC single phase. 230 V of size 300 mm sweep with, blades, frame and louvers, including making of holes in wall and making good the disturbed surface, etc complete all as specified and directed

Supply & Fixing for exhaust fan heavy duty plastic body 250 mm sweep with all accessories connecting up with twin core twisted flexible copper conductor cable from ceiling rose to exhaust fan including necessary fixing arrangement for proper fixing in wall complete all as specified and directde .

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

Supply,fixing& testing water heater storage type five star rating with multifunctional safety valve, electric operated 230 V, Single Phase complete including one no of heating element, automatic, thermal cut out, fusible plug, anti vacum sys, built in presser release valve,thermostat, rust proof powder coated body, indicator lamps and all safety advices as per E-in-C's Branch technical instructions and of capacity 25 liters including with suitabale and making good disturbed surface complete all as specified and directed .

S&F sub main wiring with two run of single core (FRLS) PVC insulated and unsheathed cable with copper conductor (Multi strand) having nominal area 6.0 Sqmm drawing into and including PVC non metallic rigid conduit of adequate size and making electric connections including one run (FRLS) PVC insulated single core copper conductor cable 4.0 Sqmm as a earth continuity conductor(green colour) in and including in non metallic rigid PVC conduit, including cutting chases in brick wall, replastering and making good to match the existing specifications complete all as per specified and directed. Note :- (i) Rates are deemed to be included chases of conduit and sinking for boxes cutting and making holes in wall/floor for passing in or through conduit (ii) Two run of 4.00 sqmm single core (FRLS) PVC insulated copper conductor cable one run of 4.0 sqmm copper conductor cable (FRLS) as a earth lead and one run of PVC conduit of suitable size will be measured as a one unit.

S&F sub main wiring with two run of single core (FRLS) PVC insulated and unsheathed cable with copper conductor (Multi strand) having nominal area 4.0 Sqmm drawing into and including PVC non metallic rigid conduit of adequate size and making electric connections including one run (FRLS) PVC insulated single core copper conductor cable 4.0 Sqmm as a earth continuity conductor(green colour) in and including in non metallic rigid PVC conduit, including cutting chases in brick wall, replastering and making good to match the existing specifications complete all as per specified and directed. Note :- (i) Rates are deemed to be included chases of conduit and sinking for boxes cutting and making holes in wall/floor for passing in or through conduit (ii) Two run of 4.00 sqmm single core (FRLS) PVC insulated copper conductor cable one run of 4.0 sqmm copper conductor cable (FRLS) as a earth lead and one run of PVC conduit of suitable size will be measured as a one unit.

M&L for Earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level, connected to galvanized earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.5 of SSR Part-I (2009) including filling of charcoal dust , common salt all around Earth plate upto 150mm, 20mm bore GI medium grade watering pipe, 15 mm bore light grade earth lead protection pipe upto main board, funnel with wiremesh, 40mm thick RCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate reinforced with suitable handle and angle iron frame and necessary excavation and earth work in any type of soil etc. complete all as specified and as directed including testing on completion. (Note: The rate quoted include cost of min 7.5 metre earthling wire .)

HARI OM ENTERPRISES (BID ID -3202150)

R K Builders (BID ID -3202971)

Ms Narinder Kumar Sehgal (BID ID -3202842)

M/s GIrdhari Lal Rakesh Kumar (BID ID -3200972)

Shiva Builders (BID ID -3202428)

M/S Raghuvanshi Builders (BID ID -3203258)

M/S YOGESHWAR ASSOCIATES GOVT CONTRACTOR (BID ID -3203178)