Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
Tender Value
₹7.1 L
EMD Value
₹8,000
Closing Date
13 Dec 2022, 3:00 pmClosed
Block Development Officer (VP)
BDO Office, Omalur Block
Salem District - Omalur Block - Construction of Kitchen Shed at PUMS Nallagoundampatty H/O Nallagoundampatty Pt AGAMT - II - 2022-23 Omalur-11/2022-23
2022_RDTN_267118_10
Roc.No.4773/2022/T5
Open Tender
Civil Works
Item Wise
90 days
BDO Office, Omalur Block
Technical Qualification Document
3 documents required · 3 mandatory
₹0
₹8,000
11 Jan 2023
25 Nov 2022
13 Dec 2022
25 Nov 2022
13 Dec 2022
25 Nov 2022
Amount
Construction of Kitchen Shed at PUMS Nallagoundampatty H/O Nallagoundampatty Pt
Earth Work excavation and depositing on bank with initial load and lift in all classes of soil as per SS 20B
Supplying and filling in foundation and basement with filling sand in layers of not more than 15 cm thick wall ramed, watered and compcted including cost and conveyance of sand and all labour charges etc., complete as per std specifications
Filling in basement with excavated earth other than sand in layers not more than 15 cm thick and well rammed, watered and consolidated including all labour charges as oper standard specification
Cement concrete 1:4:8 mix using 40 mm ISS HBG metal including cost and conveyance of all materials to site and all labour charges etc., complete
Cement concrete 1:2:4 mix using 20 mm ISS HBG metal including cost and conveyance of all materials to site and all labour charges etc., complete
R.R. Masonry in cm 1:5 mix using rough stones and bond stones with simultaneours pointing including cost and conveyance of all materials to site and all labour charges etc complete
Brick work in cm 1:5 mix using country bricks ground moulded of size 23 x 11 x 7 cu.cm including cost and conveyance of all materials to site and all labour charges etc complete
Supply and erection of centering for sides and soffits of all R.C.C workds including cost and conveyance of all materials to site and all labour charges etc complete
Roof Slab Centering
Sunshade Centering
Centering for Sides
Supplying and fabrication of steel rods including cost and conveyance of steel as per std specification etc., complete
R.C.C 1:1.5:3 mix using 20 mm ISS HBG metal including cost and conveyance of all materials to site and all labour charges etc., complete
Providing granolethic floor finish in cement concrete 1:2:4 mix using 10-12mm ISS metal to 25mm thick including cost and conveyance of all materials to site and all labour charges for mixing, laying, curing etc complete
Plastering , with cement mortar 1:3, 10 mm thich including the cost of providing cement mortor beading or nosing for sunshade and staircase steps landing slabs, etc complete complying with standard specification
Plastering with cement mortar 1:5 mix to 12 mm thick including cost and conveyance of all materials and all labour charges etc., complete
Weathering course Brick jelly lime concrete using 20mm brick jelly with slacked lime in the ratioof 32:12.5 including cost and conveyance of all materials to site and all labour charges for mixing , laying ,and finishing etc complete for 10 cum
Weathering course with brick jelly lime concrete using 20mm brick jelly with finshed with one course of pressed tiles of size 23x23x2cm with cement mortar 1:3 mix and pointed with the same oiled mortar including cost and conveyance of all materials to site and all labour charges etc complete
Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffolding arrangements, labour charges, etc., as per standard specification. (The colour and shade of the distemper shall be got approved by the Executive Engineer before use of work).
Exterior Emulsion Painting two coats with approved over one coat of Primaring coat of Cement Paint over cement plastered wall surface, ceiling and other new surface including cleaning, preparing the surface, curing, scaffolding charges etc., complete complying
Painting two coats with enamel paint over new iron work including cost and conveyance of all materials to site and all labour charges etc., ocmplete
Towards supply ad delivery of steel door and Window as per std specification
Door of size 0.90 X 2.10 m
Window of size 1.50 X 1.30 m
Jolly of size 0.45 X 0.45 m
Labour charges for fixing of Doors, etc complete
Labour charges for fixing of Windows, Ventilator & RCC Jolly etc complete
Providing Cudappah Slabs for Shelf arrangements etc., complete
Provision for electrical work (Sub Estimate)
Wiring with 2x1.5sqmm (22/0.3) PVC insulated SC unsheathed cu. Conductor of 1100v grade in suitable PVC accessories and TW switch box and 5A FT switch with painting of suitable colour for open PVC light / fan point (for electronic regulator) SD 24
Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3 mm thick Hylum sheet cover with TW box And 5 A FT switch PVC concealed Plug point (For electronic Regulator) SD 38
Supply and run of 2 of 1.50 sq.mm (22/0.30) PVC insulated SC unsheathed copper Conductor of 1100 V grade on 7/20GI bearer wire for service connection mains SD 65
Supply and run of 2 X 1.5 sq.mm (22 / 0.30) PVC insulated SC unsheathed copper Conductor of 1100 V grade in 25 mm dia GI pipe ( Class ' B ' ) suitably bent at both ends with necessary angle iron upright and end supports for mains. SD 70
Supply and fixing of 16 Amps DPIC Switch of 500 V with fuse and neutral (Side Handle) on suitable TW box PWD Earthing SD 136
Supply and fixing of 450 mm ( 48") AC Exhaust fan complete with stepped on the existing clamp. SD 106
Supply and fixing of CFL lamp of 25 W etc complete.SD 80
Provision for Water Supply Arrangements
Supply and Delivery of 25mm UPVC Pipe 10 KSC
Supply and delivery and fixing of 1000lit. HDPE Tank as per IS 12701/1996 including loading, unloding, transportation and labour charges for fixing of the G I Pipes and specialsetc., complete.
supply and delivery of 25 mm GM Gate valve etc., complete.
GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}
ACM AND CO
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .