CONSTRUCTION OF 01 No. 33 KV SHANSKRITIK SHANKUL BAY AT 132KV SUB STATION CANTT UNDER ELECTRICITY TRANSMISSION DIVISION- I VARANASI

Amount

Shifting of 33 KV breakers, CT, Isolator and auxiliary structure, Nut Bolt & Washer etc. from storage point to work site and its proper stacking.

Shifting of 33 KV Tripple Feeder Control Pannel From Store to Control Room safely and Erection of the same at desired place and earthing of the Pannel (material for earthing will be provided by the contractor).

Dismantling of Old Tripple Feeder Panel and shifting Back to Store. Shifting of all Connection of Old Panel to New Tripple Feeder Panel.

Erection of Auxiliary structure (ABL, ALP Etc) for installation of 33KV Bay, the job consist , erection of structure as per relevant drawing and practices using flat and spring washer with each bolts and machining of holes (if Required) also be done by contractor. The labour and required T&P shall be arrange by contactor at his own cost.

Dismantling of 4 No. ALP Structure properly & PI, Dehoisting of 3 No. CT and 1 No. BSI properly and safely and shifting to Store.

Erection of following equipments as per instruction manual of various equipment & technical specification

36 KV VCB

Junction box for CT

36 KV BSI

Junction box for BSI

36KV LSI

Junction box for LSI

Jumpering of following equipment with the help of ACSR panther conductor including cutting binding clamping and all other associated work for satisfactorily completion. 1. Bus bar to BSI,BSI to CB,CB to CT,CT to LSI

Laying of following sizes of control cable in the cable trenches from C/R Panel to 33 KV CT,CB,LSI,BSI /JB etc. in switch yard as per cable schedule, its saddling at every 75mm dist. with M.S. Saddle of size 25x3mm size including carriage of cable drums from store to laying site and shifting back to store and all other associated work to complete the job satisfactorily as per tech. specification:

2 x 2.5mm unarmored

4x2.5mm – do -

6x2.5mm – do -

Termination of following size of cable as laid above as per cable schedule including making necessary holes for glands in plate or box where ever required, supply and fixing of cable glands of appropriate size. Supply and providing ferrules and No. for each core of cable and its termination with crimping type lugs of Dowell/Tension and all other associated work to complete the job satisfactorily as per tech. specification:

2x2.5mm unarmored

4x2.5mm – do –

6x2.5mm – do –

Laying of D/C 33 KV XLPE Power cable of size 3Cx300 Sq mm, below 1000mm from the ground level including excavation of trench and laying cable and putting 1st class bricks on its 75mm edge along with cable on both side. Filling the same with Ganga sand and then putting bricks on 380 mm/patiya to cover the trench and then filling with earth including cost of bricks,sand,miscallaneous and all other associated work to complete the job satisfactorily.

Hoisting of 33KV 3Cx300 sq mm cable on pole/structure through G.I Pipe of size 6''(150mm) dia, 3 meter long including it's jumpering with the help of suitable size of alluminium lugs.

Termination and Jointing of above power cable by 3Cx300 Sq mm cable jointing kit O/D type and all other associated works to complete the work satisfactorily as per techenical specification.

Fabrication,fixing and fitting of cable structure in shape of H- pole,3 meter long including it's grouting with RCC of size 150*150*150mm in ratio 1:4:8 including all men & material except structure/angle.

Earthing of equipments and various structure including laying of 50x6mm MS flat. Excavation of earth up to 1 mtr below the ground level, cutting and welding with earth mat with all cost of MS flat, T&P and man power including painting with one coat of red oxide primer and two coats of synthetic enameled paint.

Earthing of trench along with 25x6mm MS flat after cutting and welding with each cable rack seperatly and trench with all cost of MS flat, T&P and man power including painting with one coat of red oxide primer and two coats of synthetic enamelled paint.

Fabrication of display board made of M.S. angle iron 50^x50^x6^mm, 3^ long support and M.S. board of 2^x1^ M.S. sheet 18 gauge and M.S. flat iron 25^x6^mm size 2^x1^ welded on M.S. sheet after then M.S. pipe of 1.5^^ dia. fitted around M.S. flat on the sheet board and 0.5^^ dia M.S. pipe 4^ long welded in M.S. angle iron from two places at one side and two at other to complete the display board. Digging pit size 2^x2^x3^ and grouting above board with 1:2:4 cement, ballast, sand ratio and making plinth of size 1^x2^. Board shall duly painted by yellow color and equipment name board shall be written in black.

Supply

Supply of 33 KV, 3Cx300 Sqmm Al. XLPE Cable of Polycab/HAVELLS/KEI /Universal make.

Supply of 33 KV Cable Jointing Kit suitable for 3Cx300 Sqmm Cable O/D type of Raychem/standard make.

Supply of G.I Pipe 'B' Class of size 6''(150mm) dia.

Supply & Fixing of 250 Watt outdoor type LED flood Light complete fittings with all fixing accessories including bracket & clams of Philips/Crompton/Havells/Syska/Bajaj/Halonix make. Original warranty/ guarantee card should also be submitted along with above material.

Supply of GI Nut Bolt and spring washer of following size -

Spring washer 16x3.5 mm

Supply of Allluminium PG Clamp suitable for Moose to Moose conductor with 4 nos Nut, Bolt & Washer.

Supply of Allluminium PG Clamp suitable for Moose to Panther conductor with 4 nos Nut, Bolt & Washer.

Supply of Allluminium PG Clamp suitable for Panther to Panther conductor with 4 nos Nut, Bolt & Washer.

M/S P B ENTERPRISES

SAI KRIPA LIFT SHIFT COMPANY