Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.0 LAccepted-Finance | ₹5.0 L | L1 | Accepted-Finance Lowest Bidder |
| 2 | L2₹5.2 LRejected-Finance | ₹5.2 L | L2 | Rejected-Finance L2 |
| 3 | L3₹5.4 LRejected-Finance | ₹5.4 L | L3 | Rejected-Finance L3 |
| Sl No | Description | Qty | Unit | rupinder justa govt contractor L3 | SAGAR L2 | PANKAJ GANGTA GOVT. CONTRACTOR L1 |
|---|---|---|---|---|---|---|
| 1.00 | Excavation in foundation,trenches (for pipes & pits) up to all depths in all classification of earth work such as pick work, jumper work, saturated soil including bailing or pumping out water, blasting soft/hard rock or chiseling soft/hard rock where blasting is prohibited in all lifts including trimming & dressing of sides, levelling of beds to correct grade i/c shoring/strutting, planking,timbering & dewatering wherever required, stacking the usable & unusable material/soil separaterly & after laying, jointing & testing of pipes, returning the useable soil in trenches in 15 Cm layers including consolidating of such deposited layer by ramming & watering & then disposing of all surplus excavated soil/unusable material as directed with in all leads & lifts including restoration of unmetalled surfaces to its original condition & including cost of diversion for traffic,night signals, fixing caution boards, crossing over trenches for access to houses, fencing etc. complete in all respects with in all leads & lifts as per directions of Engineer - in - charge. | 558 | Cum. | 561 ₹3.1 L | 560 ₹3.1 L | 550 ₹3.1 L |
| 2.00Dismantling of [HDPE] pipe (I/C) in trenches including refilling and testing etc. complete with fittings in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge in trenches to be measured and paid for separately) (as per detail attached) | ||||||
| 2.01 | 32 mm dia. | 1,200 | Rmt. | 52 ₹62,400 | 50 ₹60,000 | 49 ₹58,800 |
| 3.00Relaying of Dismantle pipes jointing and testing of [HDPE] galvanized mild steel screwed socketed / flanged pipes of following diameter and class, tube fittings in trenches i/c carriage of pipes from Sub-Divisional Store to site of work, (Earth work in trenches to be measured paid for separately) complete in all respect and to the entire satisfaction of the Engineer-in-charge | ||||||
| 3.01 | 32 mm dia. | 1,200 | Rmt. | 56 ₹67,200 | 55 ₹66,000 | 50 ₹60,000 |
| 4.00Laying , jointing and testing in trenches Galvanised Mild Steel tube of the following dia metres including smooth bending by necessary bends, or through pipe bending machine with necessary all pipe fittings such as Tees, Elbows, Union & Reducers etc. of ISI marked & testing for leakage complete with in all leads & lifts as per entire satisfication of Engineer - in - charge. (Earth work in trenches to be measured and paid for separately) | ||||||
| 4.01 | 32 mm dia. | 800 | Rmt. | 65 ₹52,000 | 60 ₹48,000 | 45 ₹36,000 |
| 4.02 | 25 mm dia. | 700 | Rmt. | 50 ₹35,000 | 45 ₹31,500 | 40 ₹28,000 |
| 5.00Providing and replacing of copper alloy wheel valve (Heavy Duty) ISI marked with in all leads and lifts as per direction of Engineer-in-Charge. | ||||||
| 5.01 | 32 mm dia. | 2 | Nos. | 1,255 ₹2,510 | 1,260 ₹2,520 | 1,250 ₹2,500 |
Tender Value
₹4.9 L
EMD Value
₹9,850
Closing Date
27 Jan 2026, 11:00 amClosed
Executive Engineer
JSV Division Jubbal
RR of GWSS Kotkhai Town in Tehsil Kotkhai Distt Shimla HP SH Dismentaling of existing HDPE pipes 90mm dia 1200 Rmt and relaying of dismentalled pipes laying jointing and testing of GI pipes of 25 mm dia 700 Rmt and 32 mm dia 800 Rmt
2026_HPIPH_126036_10
JBL-SML-09-718
Open Tender
Civil Works
90 days
Kotkhai
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
₹9,850
8 Apr 2026
17 Jan 2026
27 Jan 2026
17 Jan 2026
27 Jan 2026
17 Jan 2026
Excavation in foundation,trenches (for pipes & pits) up to all depths in all classification of earth work such as pick work, jumper work, saturated soil including bailing or pumping out water, blasting soft/hard rock or chiseling soft/hard rock where blasting is prohibited in all lifts including trimming & dressing of sides, levelling of beds to correct grade i/c shoring/strutting, planking,timbering & dewatering wherever required, stacking the usable & unusable material/soil separaterly & after laying, jointing & testing of pipes, returning the useable soil in trenches in 15 Cm layers including consolidating of such deposited layer by ramming & watering & then disposing of all surplus excavated soil/unusable material as directed with in all leads & lifts including restoration of unmetalled surfaces to its original condition & including cost of diversion for traffic,night signals, fixing caution boards, crossing over trenches for access to houses, fencing etc. complete in all respects with in all leads & lifts as per directions of Engineer - in - charge.
Dismantling of [HDPE] pipe (I/C) in trenches including refilling and testing etc. complete with fittings in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge in trenches to be measured and paid for separately) (as per detail attached)
32 mm dia.
Relaying of Dismantle pipes jointing and testing of [HDPE] galvanized mild steel screwed socketed / flanged pipes of following diameter and class, tube fittings in trenches i/c carriage of pipes from Sub-Divisional Store to site of work, (Earth work in trenches to be measured paid for separately) complete in all respect and to the entire satisfaction of the Engineer-in-charge
32 mm dia.
Laying , jointing and testing in trenches Galvanised Mild Steel tube of the following dia metres including smooth bending by necessary bends, or through pipe bending machine with necessary all pipe fittings such as Tees, Elbows, Union & Reducers etc. of ISI marked & testing for leakage complete with in all leads & lifts as per entire satisfication of Engineer - in - charge. (Earth work in trenches to be measured and paid for separately)
32 mm dia.
25 mm dia.
Providing and replacing of copper alloy wheel valve (Heavy Duty) ISI marked with in all leads and lifts as per direction of Engineer-in-Charge.
32 mm dia.
25 mm dia.
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
technical_185803.pdf
techsummary_185803.pdf
finance_185803.pdf
BOQ Comparative Chart
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.67 MB
f6.pdf
Tender Documents • 0.16 MB
f8.pdf
Tender Documents • 0.71 MB
tc.pdf
Tender Documents • 0.22 MB
BOQ_185803.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid