Replacement of Old and Damaged steel Structure n painting of gantry/conveyor structures and vertical support of column, replacement of damage sheet with new profile sheet and repairing of structure as detailed in tender documents.

Amount

Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.

Steel work welded in built up sections/framed work,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete.

Dismentling roofing including ridges,hips valleys and gutters etc and stacking the material within 50 mtr lead as per instruction of Engr. I/C

Painting of Gantry structures and vertical supporting column from tail end to discharge with single coat red oxide and two coat of synthetic enamel paint of approved brand of required shade including cleaning of dirt & dust etc as per the instruction of Engineer I/C

Providing and fixing pre-coated galvanised iron profile sheets (size, shape and pitch of corrugated as approved by Engineer-in-charge ) 0.60 mm (+/- 0.5%), total coated thickness (TCT), with zink coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in -charge. The sheet sheel be fixed using self drilling / self tapping screws of size (5.5 x 55 mm) with EPDM seal or with polymer coated J or L hooks, bolt and nuts 8 mm diameter with bitumen and G.I. limpet washer or with G.I. limpet washers filled with lead complete upto any pitch in horizontal / vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required

Providing and fixing pre-coated galvanised steel sheet roofing accessories 0.60 mm (+/- 0.5 %) total coated thickness (TCT), zink coating 120 grams per sqm as per IS:277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling / tapping screw or with polymer coated J or L hooks, bolt and nuts 8 mm diameter with bitumen and G.I. limpet washer or with G.I. limpet washers filled with lead complete complete. Ridges plain (500-600 mm)

Total impact of GST for the purpose of CTC

m/s bhagwan saran and associates

VENUS INFRATECH PRIVATE LIMITED