Development of Garden in MIG Layout of ward no 27

Development of Garden in MIG Layout of ward no 27

Earth work excavation by manual means for drains, canals, waste weir, draft,

approach channels, key trenches, foundation of Buildings & bridges and such

simillar works in all kinds of soils, as per dr...

Providing and laying in position Cement Concrete for levelling course for

all works in foundation. The granite/trap/basalt crushed graded coarse

aggregates and fine aggregates as per relevant IS Codes...

Providing and constructing load bearing wall with Solid Concrete blocks

of size 400x200x200mm having block density more than 1800kg/m3

and minimum compressive strength of 4.00 N/mm2 conforming to IS

Providing Brick work with common burnt clay Non Modular bricks of

class designation 3.5 in foundation and plinth in Cement mortar 1:4 (1

cement : 4 coarse sand) including cost of all materials, labour...

Providing 15 mm cement plaster on rough side of single or half brick

wall finished with a floating coat of neat cement of mix: 1:4 (1 cement:

4 fine sand) to brick masonry including rounding off corne...

Providing and fixing G.I. chain link fabric fencing of required width in mesh

size 25x25 mm made of G.I. wire of dia 3 mm including strengthening with

2 mm dia wire or nuts, bolts and washers as requi...

Providing and laying in position Cement Concrete for all Foundation works.

The granite/trap/basalt crushed graded coarse aggregates and fine aggregates

as per relevant IS Codes machine mixed with supe...

Providing and laying in position Cement Concrete for all Sub structures of

building, Irrigation works, Sub structure works of bridges, Drain works &

other parallel works from 0.50m to 3.50 m height. T...

Providing and fixing Structural Steel work in single section, fixed

with or without connecting plate, including cutting, hoisting, fixing in

position and applying a priming coat of approved steel prim...

Finishing with Deluxe Multi surface paint system for interiors and exteriors

using Primer as per manufacturers specifications: Two coats applied on

walls @ 1.25 L/10 m² over and including one coat of...

Painting Steel work with Deluxe Multi Surface Paint to give an even

shade. Two coat applied @ 0.90L/10 m² over an under coat of primer

applied @ 0.80 L/10 m² of approved brand and manufacture includ...

Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying ...