Stock storage under JSV Division Jubbal in Tehsil Jubbal Distt Shimla HP

Amount

Excavation in foundations , trenches etc., in earth work , lift up to 1.50 metres. Stacking the eacavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15 cm. (fifteen centimetres) layers , when required in to plinth and sides of foundations etc., conslolidating each of the disposited layer by ramming and watering and then disposing off all excavated soil as directed with in the load of 20 mtrs. Pick and Jumper work etc. complete as per the direction of the Engineer - in - Charge.

Providing & Laying cement concrete 1:4:8 (1ccement :4 sand: 8 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of form work in foundation and plinth with in all leads and lifts as per the directions of the Engineer in charge.

Providing Brick work using comon brunt clay building bricks in foundation and plinth in cement mortar 1:4 (1 cement 4 sand) with in all leads and lifts as per the directions of the Engineer in charge.

Hirmachi colour wash on undercorated wall surfaces (two coats) give an even shade i/c througly brooming the surfaces to remove all dirt mortar drops and other forgeign matter.

Cement concrete flooring 1:2:4 (1 Cement: 2 Sand: 4 Aggregate 20mm nominal size) laid in one layer. 40mm thick with all leads and lifts to entire satisfection of Engineer-in-Charge.

Providing and laying cement concrete 1:2:4 (1cement :2 Sand: 4 graded stone aggregate 20 mm (Twenty millimeter nominal size) and curing complete excluding cost of form work in Foundation and plinth with in all leads & lifts as per entire satisfication of Engineer-in-Charge.

stone soling dry hand packed tightly under plate from with in all leads and lifts as per the direction of the Engineer in Charge.

Providing from work steel plates 3.15 mm thick welded with angle iron in frame 30x30x5 mm so as to give a fair finish i/c centering, shuttering, strutting and propping etc. with wooded battens & ballies, height of propping and centring below supporting floor to ceilling not exceeding 4 meters and removal of the same for in situ reinforced concrete and plain concrete work with in all leads and lifts as per the direction of the Engineer in Charge.

Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters, buttress, plinth and string couress and the like.

15 mm thick cement plaster in single coat on fair sides of brick/concrete/ stone walls for interior plastering upto floor two level including arises internal rounded angles not exceeding 80mm girth and finished even smooth in cm 1:4 (1cement: 4sand) within all leads and lifts and as directed by the Engineer-in-charge.

Providing and fixing of Finolex pipe 50mm dia. In R/Wall including all re-fitting i/e elbowa, sockets etc. with in all leads aand lifts as per the direction of the Engineer in Charge.

Laying , jointing and testing in trenches Galvanised Mild Steel tube of the following dia metres including smooth bending by necessary bends, or through pipe bending machine with necessary all pipe fittings such as Tees, Elbows, Union & Reducers etc. of ISI marked & testing for leakage complete with in all leads & lifts as per entire satisfication of Engineer - in - charge. (Earth work in trenches to be measured and paid for separately)

15 mm dia.

20 mm dia.

Providing and fixing of full way wheel valve (Heavy Duty) ISI marked of following diameter including necessary fittings with in all leads and lifts as per direction of Engineer-in-Charge.

15 mm dia.

20 mm dia.

Pradeep Kumar Kalanta (BID ID -556690)