REPAIR TO PAVER BLOCKS, CHEQUERED TILES, PLINTH AND OTHER ALLIED WORKS AT OLD PROJECT AREA AT AF STN MANAURI

Amount

Demolition of brick work built in cement mortar including all quoions, arches pillar etc complete all as specified and directed.

M&L brick work with sub class "B" old size bricks, straight or curved on plan exec 6m mean radius built in CM 1:6 complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15cm thickness complete all as specified and directed.

M&L for 40 mm thick cement concrete type B-1, 1:2:4 (using 20mm graded crushed stone aggregate) as in floor finished even and smooth without using extra cement complete all as specified and directed.

M&L for 75mm Thick Cement concrete type C-1, 1:3:6 (using 20mm graded crushed stone aggregate) in Plinth Protection etc complete all as specified and directed.

Dismantling stone slab floor, hearth or wall tilling including cement mortar bedding(but not backing), and rubbish off premises etc complete all as specified and directed.

M&L 18-22mm thick (of size not less than 55cm x55cm) machine cut, pre-polished, Kota stone slab in floors over 20mm thick screed bed in mix 1:6 laid and jointed with grey cement to match the shade of slab including rubbing and polishing on surfaces of any description complete all as specified and directed.

M&L pre-polished Kota stone slab 18-22mm thick in riser of steps, skirting, dado and pillar laid over 10 mm thick rendering cement mortar 1:3 and jointed with grey cement to match the shade of slab including rubbing and polishing on surfaces of any description,complete all as specified and directed.

Dismantling floor, hearth or wall tilling including cement mortar bedding(but not backing), and rubbish off premises etc complete all as specified and directed.

M&L non-skid ceramic tiles joint free ceramic tiles 7 to 8 mm thick(square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:6 complete all as specified and directed.

M&L non-skid ceramic tiles joint free ceramic tiles 7 to 8 mm thick(square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in skirting/dado etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick backing coat in cement mortar 1:4 complete all as specified and directed.

M&L glazed ceramic tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over 10 mm thick backing coat in cement mortar 1:4 complete all as specified and directed.

M&L glazed ceramic coloured tiles 300mm x 200mm x 6to7 mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over 10 mm thick backing coat in cement mortar 1:4 complete all as specified and directed.

M&L joint free non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles match over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L joint free non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles match over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L providing chequered cement concrete coloured tiles glossy finish 25cm x 25cm x 22 mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment laid over and including screed bed or bedding layer 20 mm thick in cm 1:4 as in floors complete all as specified and directed.

M&L exterior grade heavy duty full body outer designer parking tiles 400x400x10mm, in floors etc. of colour and design as approved by Engr-in-Charge, set and jointed in neat cement slurry and pointed in white or coloured cement to match with existing one including 15mm thick screed bed in CM 1:6 complete all as specified and directed. Make: Kajaria / Orient Bell / H&R / Johnson

Taking down cement plaster on brick/stone surface of wall built in cement mortar including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 10 mm thick on fair face of brick walls or concrete surface in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 15 mm thick in cement plaster 1 : 4 with WPC (@ 3%by weight of cement) on fair faces of brick work or concrete surface finishing the surface even and smooth without using extra cement complete all as specified and directed. Note:- WPC shall be measured & paid seprately.

M&L for rendering 5 mm thick on ceiling in CM 1:3 finished even and fair complete all as specified and directed.

Supply only integral water proofing compound.

M&L white wash as in celing three coats on new surfaces complete all as specified and directed.

M&L for preparation of new surfaces and applying two coats of OBD over 3mm thick wall putty complete all as specified and directed.

M&L for preparation of new surfaces and applying two coats of OBD over a coat of primer complete all as specified and directed.

M&L for preparation of new surface of wall including cornices and apply two coat of cement based paint over a coat of primer etc complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Excavating in post holes(or similar holes) each n exc 0.5 cu.m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layer not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface in soft/loose soil complete all as specified and directed.

M&L reinforced cement concrete (nominal mix) 1:2:4 type B-1 using 20mm stone aggt. as in Foundations, including rafts, footings, foundation beams; plinth beams, bases for columns, etc. basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

S&F Fe-410-0 or 310-0 joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) complete all as specified and directed.

S&F roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats ,nut, bolts,washers etc. of Fe 410-W (Gde-E- 250) quality-A complete all as specified and directed.

M&L for preparation of new Steel surface of any description over 10 cm width or girth and apply two coats of synthetic enamel paint over a coat red oxide primer etc complete all as specified and directed.

Dismantling plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in ridge of roof covering, fixed with self tapping screws complete all as specified and directed.

M&L broken stone/boulder hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 10 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L 100mm thick plain Cement concrete 1:4:8 type D2 using 40mm graded aggregate for sub base including Use and waste of form work/screed strips and to divide the area in panels.and finishing surfaces of concrete even and rough to receive the topping layer complete all as specified and directed.

M&L for 50mm thick PCC 1:2:4 type B1 using 20mm graded aggregate as in floor and similar works incl. use and waste of form work/screed strips and to divide the area in panels.Finishing surfaces of concrete topping even and fair (without using extra cement) complete all as specified and directed.

Note :- (i) Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material. The contract amount shall be arrived at after deduction of Schedule of Credit from the total quoted amount in BOQ. (ii) Make of material shall be as per mentioned in Particular specifications or Appendix 'B' to Particular specifications as approved by AGE (I) AF manauri

M/S Garg Sons

AMRESH TRADERS

M/S R S Traders

HARSH ASSOCIETES

M/S KESRI WORKERS

M/S SANJAY CONSTRUCTIONS

HIMANSHU TRADERS