Repair /Maintenance of internal electrification including rewiring under GE NAMS.

Amount

Taking down aluminium point wiring from existing conduit / batten (light, fan, socket or power) complete such as switches, ceiling rose, pendent, regulators, socket, light fittings etc and removing material from site and making good the disturbed surface of wall / floor etc, complete all as specified and directed

M&L for point wiring with 1.5 sqmm (Nominal area ) 1100 Volt PVC Insulated , FRLS unsheathed and multi stranded copper conductor cable in and including new PVC Concealed conduit 20mm dia 1.5mm thick for one light / fan point or bell point controlled by one switch (including cutting chases and making good the distributed surfaces) and fixing new 3mm thick hylem sheet top cover, sheet screws and sunken boxes after removing old unserviceable plastic laminated sheeet and sunken boxes included 1.5 Sqmm stranded copper conductor with green PVC Insulation earth contunity conductor connected to common earth dolly etc. complete all as specified and directed. Note : The cost of sunken boxes and bakellite sheet is included in the quoted rate)

All as per item No 3 here-in-before but one three pin socket outlet 5 Amps independent board complete

All as per item No 3 here-in-before but one three pin 5 Amps socket outlet on the same board with other switches

All as per item No 3 here-in-before but with 2.5 Sq mm size cable multi stranded FRLS copper wire unsheathed for one 3 pin socket outlet 15 Amps on independent board including continuous earth wire of PVC insulated 1.5 Sq mm copper solid conductor connecting to common earth dolly complete.

M&L for Point wiring for MT Garages/Tank garages/hangers with 1.5 sqmm (Nominal area ) 1100 Volt PVC Insulated , FRLS unsheathed and multi stranded copper conductor cable in and including new PVC Concealed conduit 20mm dia 1.5mm thick for one light / fan point or bell point controlled by one switch (including cutting chases and making good the distributed surfaces) and fixing new 3mm thick hylam sheet top cover, sheet screws and sunken boxes after removing old unserviceable laminated sheeet and sunken boxes included 1.5 Sqmm stranded copper conductor with green PVC Insulation earth contunity conductor connected to common earth dolly etc . complete all as specified and directed. Note : The cost of sunken boxes and bakellite sheet is included in the quoted rate)

All a per item No 7 here-in-before but one three pin socket outlet 5 Amps independent board complete

All a per item No 7 here-in-before but one three pin 5 Amps socket outlet on the same board with other switches

All a per item No 7 here-in-before but with 2.5 Sq mm size cable multi stranded FRLS copper wire unsheathed for one 3 pin socket outlet 15 Amps on independent board including continuous earth wire of PVC insulated 1.5 Sq mm copper solid conductor connecting to common earth dolly complete.

M&L for point wiring concealed type with PVC insulated (unsheathed ) cable 1.5 Sq mm (Nominal area) multi stranded FRLS copper conductor 1100 V grade & continuous earth wire PVC insulated 1.5 Sq mm copper solid conductor connecting to common earth in and existing PVC conduit but fixing new sunken boxes ,3mm thick hylem sheet top cover,sheet screws and after removing old unserviceable hylem sheet (including cutting chases & making good the disturbed surface) complete all as specified and directed. Note : The cost of bakellite sheet , sunken boxes is included in the quoted rate)

All as per Srl item No 11 above but for one 5 amps socket out let independent complete all as specified.

All as per Srl item No 11 above but on the same board completeall as specified

All a per item No 11 above but with 2.5 Sq mm size cable multi stranded FRLS copper wire unsheathed for one 3 pin socket outlet 15 Amps on independent board including continuous earth wire of PVC insulated 1.5 Sq mm copper solid conductor connecting to common earth dolly complete.

Supply and Fixing in replacement switch piano type 6 Amps one way 230 volts AC complete all as specified and as directed

Supply and Fixing in replacement socket outlet 5 pin, 6 Amps flush type 230 volts AC complete all as specified and as directed

Supply and Fixing switch piano 16 Amps type one way 230 volts AC complete all as specified and as directed

Supply and Fixing in replacement socket outlet 6 pin 6/16 Amps multi purpose flush type 230 volts AC complete all as specified and as directed

Supply and fixing in replacement ceiling rose 65X50 mm two or three terminals complete all as specified.

Material and labour for replacement of lamp holder insulated body with 10 Watt LED Bulb, back plate batten/angle type for batten fitting fixed on bakelite sheet 100mmx100mm 230V AC cool day light 6500K having maximum height 1020mm heavy duty complete all as specified.

Supply and fixing in replacement fan regulator, electronic step type heavy duty socket type 230 volts complete all as specified and as directed.

Supplyand fixing in replacement of MCB single pole 6 to 32 Amps all as specified and directed

S & F in replacement of MCB 40 to 63 amps single pole with neutral, AC 230 volts complete all as specified and directed.

Supply and Fixing in replacement Bell push flush type 6 Amps one way 230 volts AC complete all as specified and as directed

Supply and fixing in replacement of bell Ding Dong AC 230 volts complete all as specified and as directed

Supply & fixing in replacement of single pole and neutral sheet metal enclosures with two pin & earth plug and socket complete with one single pole MCB of 20 Amps complete all as specified and as directed.

Supply and fixing in replacement of sheet metal enlosure for DBs when MCBs to be used double door factory made flush fixed complete with 100 amps rated bus-bar 240 volts single phase 6 ways including necessary brick work and plaster to match with the existing surface complete all as specified.

Supply and fixing in replacement of sheet metal enlosure for DBs when MCBs to be used double door factory made flush fixed complete with 100 amps rated bus-bar 240 volts single phase 8 ways including necessary brick work and plaster to match with the existing surface complete all as specified.

Supply and fixing in replacement of sheet metal enlosure for DBs when MCBs to be used double door factory made flush fixed complete with 100 amps rated bus-bar 240 volts single phase 12 ways including necessary brick work and plaster to match with the existing surface complete all as specified.

Supply and fixing in replacement of sheet steel enclouser distribution boards, double door factory made TPN Vertical 4 way 3 phase 415 volts 4 way with 200 amps rating copper bus bar and PVC insulated copper jumpers of suitable size from the MCCB to the out going circuits one incoming MCCB and 12 outgoing MCBs circuits comprising of 3 phase 4 wire of suitable rating complete all as spcd and directed with the following accessories :-( For out going MCB & MCCB 100 AMPS 3 Pole measured and paid for separately)

Supply and fixing in replacement of MCCB 100 Amps , AC 415 Volts 16KA 3/4 pole including making connections with suitable size of aluminium lugs all as specified and directed.

Supply and fixing in replacement of steel sheet enclouser distribution boards, double door factory made TPN Vertical 4 way 3 phase 415 volts with 200 amps rating copper bus bar and PVC insulated copper jumpers of suitable size from the MCCB to the out going circuits one incoming MCCB and 12 outgoing MCBs circuits comprising of 3 phase 4 wire of suitable rating with MCCB 100 amps, 25 KA, TP, 415 volts, 50 Hz = 01 No complete all as specified and directed.

Supply and fixing in replacement of busbar chamber 250 Amp 4way factory made complete with locking arrangement including necessary brick work and plaster to match with the existing surface complete all as specified.

S&F in replacemnt of MCCB four pole thermal adjustable type 200 Amp 25KA fixed magnetic with tripping arrangment with factory made enclosure including necessary brick work and plaster to match with the existing surface complete all as specified.

M&L in replacement of sub main wiring 6 Sqmm multi-strand PVC insulated copper conductor FRLS cable including PVC insulated copper conductor cable of size 4 Sqmm as cotinuous earth wire connecting to common earth including connections of cable with MCBs or bus bars complete all as specified and directed

M&L in replacement of sub main wiring 4 Sqmm multi-strand PVC insulated copper conductor FRLS cable including PVC insulated copper conductor cable of size 2.5 Sqmm as cotinuous earth wire connecting to common earth including connections of cable with MCBs or bus bars complete all as specified and directed

M&L in replacement of sub main wiring 2.5 Sqmm multi-strand PVC insulated copper conductor FRLS cable including PVC insulated copper conductor cable of size 1.5 Sqmm as cotinuous earth wire connecting to common earth including connections of cable with MCBs or bus bars complete all as specified and directed

S & F Regid non-metallic PVC conduit not less than 20 dia (external ) ISI marked for passing through submains etc of size 25mm dia including of all accessories and all fittings such as Tees,bends, elbows, reducers, bell mouth, tube ends and fixing accossories such as couplers,lock nuts, saddles, pipe hook etc complete all as specified and as directed

Supply and fixing in replacement LED tube light fitting tube lighting fixture 18watt LED 6000K , decorative ultra slim linear with extruded polycarbonate environmental friendly energy efficient ready to use pack complete all as specified and directed

Supply and fixing in replacement LED tube light fitting tube lighting fixture 9/10 watt LED 6000K , decorative ultra slim linear with extruded polycarbonate environmental friendly energy efficient ready to use pack complete all as specified and directed

Supply and fixing in replacement of LED T-8 tube light fitting with single side connection polycarbonate LED tube rod 18/20W 4 feet 1 x 18/20 watt box type including rotary type bipin holder and connection with PVC insulalted twin core 23/0.0076 twisted copper cable from ceiling rose to tube light fitting complete all as specified and directed.

Supply and fixing in replacement of automatic monoblock pressure/ booster pump size 25mm x 25mm, tech motor S1 class B 230 Volt 500 HZ, RPM 2800, 10 MF, input power 650 watt with pressure tank of cap 19 ltrs PS max pressure bar 10 PT test pressure bar 14 with complete accessories incl GI Pipe/gate valve/NRV complete all as specified and directed.

Supply and fixing in replacement light bracket wall mounting decorative type LED fitting upto 1x8/11 W mini including lamp Complete all as specified and directed.

Supply and fixing in replacement Environment friendly , energy efficient , aesthetically designed circular shaped decorative wall/ceiling light LED Fixture 12 W LED 6K with opal diffuser to give glare free light complete all as specified and directed,

Supply & fixing in replacement of 6 watt Square/Round recess mounted down lighter separate replaceable electronic driver celling cut out 104mm x 104mm height 30mm square shaped polycarbonate fixture complete all as specified and directed.

Supply & fixing in replacement of 12Watt Square/Round recess mounted down lighter separate replaceable electronic driver celling cut out 155mm x 155mm height 32mm square shaped polycarbonate fixture complete all as specified and directed,

Supply & fixing in replacement of 15Watt Square/Round recess mounted down lighter separate replaceable electronic driver celling cut out dia 104 mm height 30mm round shaped polycarbonate fixture complete all as specified and directed,

Supply & fixing in replacement of 18Watt Square/ Round recess mounted down lighter separate replaceable electronic driver celling cut out dia 155 mm height 32mm round shaped polycarbonate fixture complete all as specified and directed,

Supply and fixing in replacement decorative LED wall light fixture including lamp made up of polycarbonate light fitting city-3 suitable for 9 Watt complete all as specified and directed

Supply & fix in replacement of LED Security Light Luminaire 25 watt 6000K with .high power LED cool white,CRI 75,+/- 5% supply voltage 220/240/50 Hz, light engine driver base.pole adapter,powder coated pressure die cast aluminium with heat resistant toughened glass with lens.

Supplying and fixing in replacement LED bulk head light fittings 10 watt white as per IP 65 in engineering plastic housing with clear prismatic diffuser and making necessary connections complete all as specified

Supply and fixing in replacemnt of looking mirror LED light decorative type wall mounting SS finish fixture with opal glass diffuser suitable for 11W incandescent lamp with lamp complete all as specified and directed.

Supply and fixing in replacemnt of LED tube light fitting 1x36 watts decorative mirror optics luminaire including LED rod with anodised aluminium louvers and white engineering plastic end cover complete with, rotory type bipin holder and including connection with PVC insulated three core 23/0.0076 flexible copper cable from ceiling rose to tube light fitting complet all as specified and directed.

Supply and fixing in replacemnt of LED tube light fitting 1 x 28 watts decorative mirror optics luminaire including tube rod with anodised aluminium louvers and white engineering plastic end cover complete with rotory type bipin holder and including connection with PVC insulated three core 23/0.0076 flexible copper cable from ceiling rose to tube light fitting complet all as specified and directed.

Supply only in replacemnt LED tube Rod 18/20W, 1.2 mtr length output 6000 to 6500 lumens 220V AC white effect complete all as specified and directed by Engineer-in -charge.

Supply and fixing Exhaust fan AC 230Volts 300mm ventilair DX high quality engineering plastic complete with louvers and shutters complete all as specified and directed .

Supply and fixing in replacemnt of LED bed light fancy type with lamp 3 watt complete all as specified and directed.

Supply only in replacement LED slim panel cygnus series recess / surface / suspended mounting LED slim ceiling light 2'x2' with extruded aluminium housing and milky diffuser, suitable for recess mounted size 595x595mm complete with LED tube.

Supply and fixing in replacement bracket made out of GI pipe 40 mm medium grade 1.2 mtr long made to shape with fixing clamps of MS flat 40x6mm nut bolts etc for security light all as specified and directed

Supply & fixing in replacement of integral post top lanterns complete with Black ABC plastic spigot, spun aluminium funnel shape with clear acrylic cover light opening on canopy with baffles and accessories with 10watt LED lamp complete all as specified and directed

Supply & Fix in replacemnt of flood Light Luminaire 120 watt with .high power SMD LED cool white,CRI 75,+/- 5% supply voltage 220/240/50 Hz, light engine driver base.pole adapter, pressure die cast LM6 diffusor:injection model polycarbonate, powdre coated in IP 66 Incliding protection over temperature should be from the same manufacturer Product complete all as specified and directed

Supply & Fix in repair flood Light Luminaire 150 watt with .high power SMD LED cool white,CRI 75,+/- 5% supply voltage 220/240/50 Hz, light engine driver base.pole adapter,pressure die cast LM6 diffusor:injection model polycarbonate,powdre coated in IP 66 Incliding protection over temperature should be from the same manufacturer Product complete all as specified and directed

Supply and Install in replacement of Off Load Change over switch 415 Volts in sheet metal enclouser 4 Pole of capacity minimum 100 Amps complete all as specified and directed.

Supply and fixing ceiling fan 1200mm Sweep copper winding,high speed, Aluminium body with blade, double ball bearing of BEE star rated Including acessories connector, canopy, Hanging Rod and clamps , including electric connection with pvc flexible twin core copper wire from ceiling rose to ceiling fan complete all as specified and directed

Supply and fixing in replacemnt of 40mm dia tube light grade galvanised with all fittings complete to wall or for garden lights or laid in floors for cable protection including cutting chases and necessary brick work and plaster work to making good the distributed surface complete all as specified and directed.

Material and labour for PCC (1:3:6) TYPE C-2 using 40mm graded stone aggregate as in foundation / coping of light complete all as specified and directed.

Supply and Fixing only in replacement modular fan step regulator, heavy duty 230 volts , 2 module complete all as specified and as directed.

M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade) and watering pipe 20 mm bore GI pipe (light grade ) and chamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg. 50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 5 of SSR PART 1 , with charcoal dust and salt complete and earth lead connected to earthing test point (up to main switche, DBs) complete all as specified & testing on completion.

Supply and laying or fixing in replacement 1100 Volts grade heavy duty cable with PVC insulated aluminium standard conductor served with an inner sheathing of PVC tape and over all PVC Sheathed in service connections suspended by insulating hangers not more than 1 meter a part including 4mm suspension wire, one twin core 10 Sqmm cable standard conductor cable flat or circular all as specified and directed by Engineer- in- Charge.

Supply and laying or fixing in replacement 1100 Volts grade heavy duty cable with PVC insulated aluminium standard conductor served with an inner sheathing of PVC tape and over all PVC Sheathed in service connections suspended by insulating hangers not more than 1 meter a part including 4mm suspension wire, one twin core 6 Sqmm cable standard conductor cable flat or circular all as specified and directed by Engineer- in- Charge.

Supply only in replacemnt of FTL Rod 36W, 1.2 mtr length output 3250/3500 lumens 220V AC white incandescent effect complete all as specified and directed by Engineer-in -charge.

Supply only in replacemnt LED Bulb 230V AC 9/10 watt cool day light 6500K having maximum height 1020mm heavy duty complere all as specified and directed by Engineer-in -charge.

Supply only in replacemnt of CFL 230V AC 20 watt enery saving lamps white light 2700K having maximum height 114 mm heavy duty complete all as specified and directed by Engineer-in -charge. ( Note: Old unserviceable CFL shall be deposited to AGE E/M Store Yard)

Supply and fixing single the static whole current electronic energy meter single phase 10-60 Amps two wire of accuracy class 1.0, as per IS 13779 power factor unity to zero (all power factor lag/or lead ). starting current : 0.40 % lb , current 240 volt,50 Hz with LCD display. The meter shall be able to recording in Kwh/KVAH, MD, current load, V, Amp, Freq, etc burden of voltage circuit shall not exceed 1 VA. The shall have IEC 1107 port and shall be DLMS compatible for data reading. The meter should be immune to DC magnitic fields as per the CBIP 304. The meter should record the anti tamper features under the conditions mentioned as reversal of line load terminals, interchanging of phase and neutral wires, drawing of load by disconnecting neutral of meter & out going earth, meter body opening, neutral disturbance with transparent the pilfer proof meter box (PPMB) suitable to house single phase staatic energy meter. The meter shall be wall mounted type and have ability so as to offer protection of electrical equipment. High grade fire retardant Engineering plastic (Acrylonitrile butadiene styrene /Polycorbonate, with minimum thickness 2.00 mm necessary sealing with lead meter and appropriate size copper lugs and necessary PCC work if reqd with existing surface complete at no extra cost including the fwg works including taking out existing meter and handed over to AGE E/M store Yard.

(a) Connection of incomming and outgoing service cable /submain cable with meter is included in the quoted rate. (b) Sealing with the name of AGE E/M Punch and with lead seal and gi standard sealing wire.(c ) LCD test and display of all reading with battery back up for accessing reading during absence of electric supply. (d) The rate shall be included for testing and commissionoing alongwith preparation of documentation and submitting in triplicate.

M&L in replacement of single core wiring 10 Sqmm multi-strand PVC insulated copper conductor FRLS cable including connections of cable with MCBs or bus bars complete all as specified and directed

M&L in replacement of single core wiring 6 Sqmm multi-strand PVC insulated copper conductor FRLS cable including connections of cable with MCBs or bus bars complete all as specified and directed

M&L for point wiring concealed type with PVC insulated (unsheathed ) cable 1.5 Sq mm (Nominal area) multi stranded FRLS copper conductor 1100 V grade & continuous earth wire PVC insulated 1.5 Sq mm copper solid conductor connecting to common earth in and existing PVC conduit, and sunken boxes but fixing new 3mm thick plastic laminated sheet top cover,sheet screws and after removing old unserviceable plastic laminated sheet (including cutting chases & making good the disturbed surface) complete all as specified and directed by Engineer-in-Charge for the following:-Note : The cost of suitable size MS housing box and frame plate sheet are included in the quoted rate)

All as per Srl item No 77 here in before but for one 5 amps socket out let independent complete all as specified.

All as per Srl item No 77 here in before but on the same board completeall as specified

All a per item No 77 here-in-above but with 2.5 Sq mm size cable multi stranded FRLS copper wire unsheathed for one 3 pin socket outlet 15 Amps on independent board including continuous earth wire of PVC insulated 1.5 Sq mm copper solid conductor connecting to common earth dolly complete.

Supply and Fixing in replacemnt of Modular switch 6 Amps one module 230 volts AC complete all as specified and as directed

Supply and Fixing in replacemnt of Modular socket, 6A -2/3 pin combined 2 module, 230 volts AC complete all as specified and as directed

Supply and Fixing in replacemnt of Modular switch 16 Amps one module 230 volts AC complete all as specified and as directed

Supply and Fixing in replacement of Modular socket 6A/16A, 2/3 pin combined, two module 230 volts AC complete all as specified and as directed

M/S RASHPAL CONSTRUCTION CO

kailu construction co

Santokh Singh and Associates

Bharat Builder