Constt. of Class rooms at GPS Amnota

Select, At Par, Excess (+), Less (-) IOCL

Tender Inviting Authority: EXECUTIVE ENGINEER REW DIVISION KATHUA

Name of Work;- Construction of Class Room at Govt. Primary School Amnota , Zone Bani , Pyt. Chandal , Block Bani District Kathua under DOF MLACF for the year 2025-26 ESTT AMOUNT 28.63 LACS

Contract NO:- DOF- MLACDF- 2025-26

Name of the Bidder/ Bidding Firm / Company :

S. No. Item Description Item Code / Make Quantity Units Estimated Rate in Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil :

All kinds of soil : 80% cum 592.9 1000 Excess(+) Full Conversion INR

All kinds of soil : 20% cum 940.3 1000 Excess(+) Full Conversion INR

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil :

All kinds of soil : 80% cum 1000 Excess(+) Full Conversion INR

All kinds of soil : 20% cum 1000 Excess(+) Full Conversion INR

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) cum 1000 Excess(+) Full Conversion INR

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) cum 1000 Excess(+) Full Conversion INR

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level in1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) cum 1000 Excess(+) Full Conversion INR

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) cum 1000 Excess(+) Full Conversion INR

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement in 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) cum 1000 Excess(+) Full Conversion INR

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete at all levels:- Thermo-Mechanically Treated bars of grade Fe-500D or more. kg 1000 Excess(+) Full Conversion INR

Centering and shuttering including strutting, propping etc. and removal of form for:Foundations, footings, bases of columns etc. for mass concrete. sqm 1000 Excess(+) Full Conversion INR

Centering and shuttering including strutting, propping etc. and removal of form for:Lintel, beams, plinth beams, girders, bressumers and cantilevers sqm 1000 Excess(+) Full Conversion INR

Centering and shuttering including strutting, propping etc. and removal of form for:Columns, pillars, piers, abutments, posts and struts. sqm 1000 Excess(+) Full Conversion INR

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:4 ( 1 cement : 4 coarse sand) cum 1000 Excess(+) Full Conversion INR

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level cum 1000 Excess(+) Full Conversion INR

12 mm Cement plaster on the rough side of single or half brick walls of mix 1: 6 (1 cement :6 fine sand ) all complete including making of groves and scaffolding etc. at all floor levels complete externally cum 1000 Excess(+) Full Conversion INR

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded Kg 1000 Excess(+) Full Conversion INR

Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. sqm 1000 Excess(+) Full Conversion INR

Providing and fixing precoated galvanised steel sheet roofing accessories0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm) Rmt 1000 Excess(+) Full Conversion INR

Providing and fixing ply wood 4mm thick one side decorative veneer conforming to IS: 1328(type 1), for plain lining/cladding with necessary screws, including priming coat on unexposed surface with. Decorative veneer facings of approved manufactures sqm 1000 Excess(+) Full Conversion INR

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position ( Fir wood ) cum 1000 Excess(+) Full Conversion INR

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete:50 mm thick with 20mm nominal size stone aggregate sqm 1000 Excess(+) Full Conversion INR

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand) internally sqm 1000 Excess(+) Full Conversion INR

Providing and fixing strips in joints of terrazzo/ cement concrete floors: Glass strips 40 mm wide and 4 mm thick Rmt 1000 Excess(+) Full Conversion INR

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):Second class deodar wood cum 151248.45 1000 Excess(+) Full Conversion INR

Providing and fixing 30 mm thick panelled or panelled and glazed shutters for doors ,windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). Second deodar wood sqm 3284.7 1000 Excess(+) Full Conversion INR

Providing and fixing 30 mm thick wire gauze shutters using galvanized M.S. wire gauze ofaverage width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge in Second class deodar wood sqm 3788.5 1000 Excess(+) Full Conversion INR

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws in Second class deodar wood sqm 4031.35 1000 Excess(+) Full Conversion INR

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick in Ply wood 5 ply, 9 mm thick in Commercial ply on both sides sqm 1000 Excess(+) Full Conversion INR

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approvedsteel primer all complete. Fixed to steel windows by welding kg 1000 Excess(+) Full Conversion INR

Distempering with dry distemper of approved brand and manufacture (two or more coats) and of required shade on new work, over and including water thinnable priming coat to give an even shade sqm 1000 Excess(+) Full Conversion INR

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) sqm 1000 Excess(+) Full Conversion INR

Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: Two or more coats applied @ 1.25 liter/10sqm over and including one coat of special primer applied @ 0.75liter /10sqm. Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90litre/10sqm over anunder coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture sqm 1000 Excess(+) Full Conversion INR

Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete sqm 1000 Excess(+) Full Conversion INR

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. cum 1000 Excess(+) Full Conversion INR

Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.Single socketed pipes of 110 mm. Rmt 1000 Excess(+) Full Conversion INR

Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 150x10 mm Nos 1000 Excess(+) Full Conversion INR

Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 100x10 mm Nos 1000 Excess(+) Full Conversion INR

Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete: 125 mm Nos 1000 Excess(+) Full Conversion INR

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 gradedstone aggregate 20 mm nominal size). Nos 1000 Excess(+) Full Conversion INR

Dry stone massonry with hard sonr from nallaha including dpc 50mm thick. Nos 1000 Excess(+) Full Conversion INR

Wiring for light point, fan point/ exaust fan point/ call bell point with 1.5 sqmm FRLS PVS insulated copper conductor single core cable in surface / recessed PVC conduit, with modular switch,modular plates , suitable GI Box earthing the point with 1.5sq.mm FRLS PVS insulated copper conductor single core cable etc. as required complete fitting . Nos 1000 Excess(+) Full Conversion INR

Carriage of material by mechanical transport invl loading , unloading(complete )

Sand & bajri upto lead 170 Km by Mtand 2.0.0km by A.T Cum 1000 Excess(+) Full Conversion INR

Bricks up to lead 200 Km by MT and 2.0km by A.T 1000 Nos 1000 Excess(+) Full Conversion INR

Stone upto lead 1.5km by A.T Cum 1000 Excess(+) Full Conversion INR

Add C/O Sign board Nos 1000 Excess(+) Full Conversion INR

Total in Figures Excess(+) Full Conversion INR

Quoted Rate in Figures Select

Please Enable Macros to View BoQ information