Construction of sump well and balance work of operator quarter and allied work at Chitragam for WSS Cngnoo Chitragam

Amount

Earth work in excavation by manual means over areas exceeding 1.50 mtr in depth in all sorts of soil and classification incl additional leads and lifts of earth work , close timbering dewatering during execution and rifling when ever required.

Earth work in excavation by manual means in trenches in foundation, drains pipes cables not exceeding 1.50 mtr in width incl. rifling/disposal of excavated earth as per requirement at site of complete job

Supply and filling of stone boulder/ stone soling

Dry random rubble masonry with hard stone in foundation and plinth Using nallah stone with bond stone

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level.1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) incl carriage complete job

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°,landings, balconies, shelves, chajjas, lintels, bands,plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring,shuttering, finishing and reinforcement with 1:2:4 ( 1cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size incl carriage complete job

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Thermo-Mechanically Treated bars.

Steel work welded in built up sections/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.

Providing form work of ordinary timber planks (a) Foundation and plinth

(b) Walls of any thickness

(c) Suspended floors

(d) Edges of slabs

Strctural steel work in single section fixed with connecting plate including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer all complete

Providing and fixing G. I. chain link fabric fencing of required width in mesh size 50x50mm including strengthening with 2mm dia wire or nuts, bolts and washers as required complete as per direction of Engineer-in-charge. 17.87.1 Made of G. I. wire of dia 4mm

Laying in position centrifugally cast (spun) iron S&S or flanged pipes (excluding cost of pipe)

providing push-on-joints to Centrifugally (spun cast ~ iron pipes or Ductile !ron Pipes including te.sting of joints andeluding the cost of rubber gasket.

Providing hoisting and fixing trusses/purlins rafters/posts/post-plates or like components including cost of screws papular etc. complete(Popular wood)

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, boltsand nuts 8mm diameter with bitumen and G. I limpet washersor with G. I. limpet washers filled with white lead and includinga coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape whereever equired.0.63mm thick with zinc coating not less than 27 5gm/m2

Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G. I. limpet and bitumen washers complete. 0.63mm thick with zinc coating not less than 275gm/m2

Providing and fixing planed eaves boarding 250x32 mm (nominal size)

12mm thick plaster in single coat 1:4 mix

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.

Applying Priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with acid proof paint of approved brand and manufacture of required colour to give an even shade. Two or more coats on new work

P/f glass panes with putty and glazing clips in steel doors windows, clerestory windows all complete with 4.00 mm thick glass panes

Electric fitting:- P/F incl successful testing of electric fitting like wire, for lighting /heating (1mm to 2.5 mm) incl blubs switches boards changeover complete job

Carriage of material of MT:- (a) stone boulders avg 16 km

(b) 20 m stone agg Avg 17 km

(c) Carriage of sand avg 17 km

ABID HUSSAIN GANIE