REPAIR/REPLACEMENT OF JOINERY, PLASTERING, WALL TILES, FLOORING AND OTHER MISC WORKS IN OTHER THAN MH AREA UNDER AGE B/R AT GE (U) E/M MEERUT CANTT

Amount

Demolition of brick work built in cement mortar including all arches, pillars all quoins etc, complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar, complete all as specified and directed..

Dismantling wall/ ceiling boards(fibre pulp insulation etc.) or insulations boards /slabs/blankets any thickness incl. cover fillets and alum snip grid , complete all as specified and directed.

Dismantling floor hearth or wall tiling incl cement mortar bedding/plaster (but not backing) and removing rubbish off the premises etc complete all as directed.

Demolition of concrete ( un reinforced ) in ground floors and paving nexc 15 cm thick (below or above ground level), complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for , complete all as specified and directed.

Dismantling asbestos cement (corrugated/ semi corrugated etc) sheet in roof covering complete all as specified and directed.

M &L MS work as in wind tie or any other work incl cutting, drilling holes etc, complete all as specified and directed.

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

All as per item No. 9 above but plain sheet fix in valley gutter / ridge , complete all as specified and directed.

M&L preparation of new steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer , complete all as specified and directed.

M&L brick work with fly ash bricks straight or curved on plan to any radius built in CM 1:6 all as specified and directed by Engr -in-Charge

Ditto as per srl item No 12 above but except brick.

Taking down chowkats or frames with shutters ( without taking off shutters from the frame) exc 1.5 sqm but n.exc 4 sqm each , complete all as specified and directed.

Ditto as above but n.exc 1.5 Sqm each.

Refixing shutter of any description exc. 1 sqm but not exc 2 Sqm each complete all as specified and directed.

Taking down shutter of any description exc. 1 sqm but not exc 2 Sqm each complete all as specified and directed.

Supply & Fixing PVC door frame (50x47) mm made out of plain colour5 mm thich PVC Sheet re in forced with MS Square Tube, supplying & fixing in opening as per specification & drawing , complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick ( Style ) consisting of frame made out of MS Tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC ' C 'Channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC Sheets for top rail , lock rail & bottomrail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC Sheet to be fitted in the MS Frame welded / sealed to stiles & rails with suitable PVC Sheet beading, jointed together with solvent cement,supplying & fixing in the frame at site as per specification & drawing.

S & F factory made 35mm thick plain, framed, panelled shutters (two panels), with lock rail and panels of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS 1003(Part I), kiln seasoned and chemically pressure treated,with second class hard wood rail and style.complete all as specified and directed.

S & F factory made 35 mm thick glazed & skeleton shutter of 2nd class hard wood open rebated and prepared to receive gauge (divided into squares with sash bars) edges of framing plain chamfered or rounded, fitted without & fitted beads for securing glass etc, sizes of members of shutters as specified in SSR Pt-I Sec-8 clause 8.23 (a) and fitted to chowkhats complete all as specified.

S & F steel window double leaf double shutter (gauge shutter will open inside and glaze shutter will open outside) with side hung shutter including box type hinges with peg stay 300mm long and 100 mm long handles of Z Section welded to frames & 150 mm long tower bolt welded to shutter one each at top and bottom to each shutter complete with glazing bar for one shutter and gauze bars of FI 10x 3mm thick dovetailed or welded .All as specified (Note:-Glass and wire gauze shall be measured and paid seperately)..

Supply and fixing mild steel framed work such as grills, grating, treads, landing baluster, hand rail etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, walk ways hand rail, wind ties for roof including securing bolts and struts in fencing, frame work of water tank and similar work, drilling holes notching for wire etc confirming to Fe-290 Gde-E-165 etc. complete all as specified

Cutting holes in stone/ brick walls built in cement mortar for inserting hold fast/lugs & making good disturbed portion in CM 1:3 or cement congrete 1:2:4, type B-1 as required (Depth of embedded portion of hold fasts orings measured from the face of the jamb into wall exc half brick but no exc one brick., complete all as specified and directed.

S&F aluminum anodised window and ventilator shutter sliding type two track with or without sash bars , with aluminum section weighing not less than 0.55 Kg per Sqm including necessary joining cleats , glazing clips, rubber packing, aluminium Snap beading , screws, aluminum fittings, suitable handles complete . (Note:-Glass shall be measured and paid seperately).

Supply and fixing aluminum anodized door shutters, powder coated of any colour (thickness of powder coating not less than 50 Micron) side hung type, without sash bars, aluminum section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodised aluminium fittings,5.5mm thick ordinary plain glass ( Glass make-Saint Gobain/Modi Guard/Atul) complete all as specified.

S & F Aluminium chequered grill with aluminium anodized of diamond shape with 6 mm wires and mesh of size 75 x 75 mm in aluminium 'Y' channel and aluminium flat 25 mm wide fixed with aluminium screws complete all as specified.

S & F anodized aluminum frame for doors, windows & ventilators with one or more rebate inlcuding jointing cleats and alike for fixing , complete all as specified and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stanless steel wire staples, complete all as specified and directed.

S&F 3.0 mm th sheet glass ordinary quality plain and glazing with oil putty in square n'exc .5 sqm in each pane, complete all as specified and directed.

S&F 4.8 mm th sheet glass plain and glazing with oil putty in square n'exc .5 sqm in each pane.

S & F 100 mm long aluminium anodised barrel tower bolt complete all as specified and directed.

S & F 150 mm long aluminium anodised barrel tower bolt complete all as specified and directed.

S & F 100 mm long extruded anodised aluminium alloy handle, complete all as specified and directed.

S & F of 150 mm long extruded anodised aluminium alloy handle, complete all as specified and directed.

S&F 100 mm MS, Butt hinges,medium weight cold rolled mild steel fixed with screw , complete all as specified and directed.

S&F 125 mm MS, Butt hinges,medium weight cold rolled mild steel fixed with screw , complete all as specified and directed.

S & F 250 mm long (length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt or cast aluminium alloy complete all as specified and directed.

S & F 300 mm long (length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt or cast aluminium alloy complete all as specified and directed.

S&F pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 105 X 60mm , complete all as specified and directed.

M&L 25 mm thick P.C.C 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate in sub base , complete all as specified and directed.

M&L machine cut kota stone slab flooring 20-25mm thick over and including cement screed based 15 mm thick in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cutting polishing and rubbing , complete all as specified and directed.

M & L Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.11 Sqm but not exc. 0.18 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed.

All as per item No 42 above but on skirtings with 10 mm thick backing coat in CM (1:4) , complete all as specified and directed.

M&L vitrified coloured ceramic tiles 10mm thick (square/rectangular) polished and dark shed joint free of each tile exc. 0.18 sqm but n exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm th screed bed in CM 1:6 , complete all as specified and directed.

Ditto above item No above but on skirting with 10 mm thick backing coat in CM 1:4 complete.

M&L glazed coloured ceramic tiles 350 mm x 250mm/450mmx350x7 to10 mm thick as in vertical surfces set & jointed in neat cement slurry & pointed in coloured cement incl backing coat 10mm thick in CM 1:4 all as direced.

S&F in repairs 25mm aluminium alloy anodised curtain rod fixed to brackets complete all as specified and directed.

S&F aluminium anodised brackets for 25mm dia curtain rods complete all as directed.

M & L 50 mm thick Cement concrete type C-2, 1:3:6 (40 mm graded crushed stone aggregate) as in plinth protection finished even and fair , complete all as specified and directed.

Taking down cement plaster of any description from brick or stone wall etc incl raking out joints and hacking for key, scrubbing down with water etc complete, complete all as specified and directed.

M&L rendering 10 mm thick using ready mixed plaster (in bags) as per manufacturer on fair faces of brick walls/ concrete surface etc finished fair and even complete all as specified and directed. Note No1:- Make of ready mixed plaster: Ultratech Readyplast, ACC Accoplast , Birla Aerocon, Note No.2:- Contractor shall bring total bags of ready mix plaster required against the work at site as approved by GE, before commencement of the plastering work.

M&L rendering 15 mm thick using ready mixed plaster (in bags) as per manufacturer on fair faces of brick walls/ concrete surface etc finished fair and even complete all as specified and directed. Note No1:- Make of ready mixed plaster: Ultratech Readyplast, ACC Accoplast , Birla Aerocon, Note No.2:- Contractor shall bring total bags of ready mix plaster required against the work at site and get approved by GE, before commencement of the plastering work.

M&L rendering 15 mm thick using ready mixed plaster (in bags) as per manufacturer on fair faces of chajja and facia etc finished fair and even complete all as specified and directed. Note No1:- Make of ready mixed plaster: Ultratech Readyplast, ACC Accoplast , Birla Aerocon, Note No.2:- Contractor shall bring total bags of ready mix plaster required against the work at site as get approved by GE, before commencement of the plastering work.

Prepartion of newly plastered surface of wall and applying two coats of weatherproof paint with 1mm thick putty on external surfaces including a coat of alkali resistant priming paint complete all as specified.

M&L rendering 5 mm thick using ready mixed plaster (in bags) as per manufacturer on fair faces of ceiling or soffit etc finished fair and even complete all as specified and directed. Note No1:- Make of ready mixed plaster: Ultratech Readyplast, ACC Accoplast , Birla Aerocon, Note No.2:- Contractor shall bring total bags of ready mix plaster required against the work at site as approved by GE, before commencement of the plastering work.

M&L three coats of white wash to new plastered surfaces on ceiling including preparation of surfaces complete all as specified & directed by Engineer-in-Charge.

Preparing new plastered surfaces & applying two coats of cement base paint over a coat of primer on walls complete all as specified. .

Preparation of new plastered surfaces of wall & applying two coats of oil emulsion distemper over a coat of prime with 1mm thick wall care putty complete all as soecified.

Complete removal of existing treatment of painted surfaces and priming with alkalie resistant priming paint & applying two coats of oil emulsion distemper on wall including preparation complete all as specified & as directed.

Preparing surface and apply 1mm wall care putty on wall surface complete all as specified & as directed.

Complete removal of existing treatment of painted surfaces and applying two coats of cement paint complete all as specified and directed.

Complete removal of existing treatment from walls , pillars and cornices washing, rubbing down and stopping of distempered and painted surfaces and cleaning the entire area(existing treatment may be of either white wash /colour wash/dry distemper /oil bound distemper/enamel paint) and making the wall surfaces smooth and applying one coat of cement primer and two coat of apex weather proof exterior grade emulsion (asian paint) complete all as specified and directed by Engr -in-charge

Preparation of new wooden surfaces exc. 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Preparation of old wooden surfaces exc. 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Preparation of old steel surfaces exc. 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

S & F Anodised Alu. Snap grid 605x605 mm frame wk for false ceiling and providing 9mm th Acoustical board/tiles for insula-tion and accoustic purposes, 60x60 cm in size, fixed in celing with screws to frame work or with staples on snap grid including hangers 6 mm dia G.I. ( up to 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 X 3 mm size 60 mm long all as specified and directed.

S& F 5mm thick plain colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining,Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site complete all as specified.

M/S VIKRANT ENTERPRISES

Tridev Construction Company

VIRAT CONSTRUCTIONS

M/S AGARWAL CONSTRUCTION CO.

Shikha Enterprises

SHAKTI CONSTRUCTION CO