Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.9 LAccepted-AOC 142 JAGJIVANRAM NAGAR GAROBA MAIDAN NAGPUR 440008 | NAGPUR | NAGPUR | MAHARASHTRA | 440008 | L1 | Accepted-AOC Being the lowest | |
| 2 | L2₹6.7 L+₹78,335.60 (13.3%)Rejected-AOC | L2 | Rejected-AOC Not being the lowest |
Tender Value
₹7.2 L
EMD Value
₹14,400
Closing Date
12 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE (I) AF Sonegaon, Nagpur
Bldg P-51, 44 Wings AF Station Sonegaon, Nagpur-440005
PROVN OF VIDEO RECORDING ROOM, PLATFORM FOR WIND SOCK AND HOT WATER SUPPLY AT ARMOURY WORKSHOP AT AF STN SONEGAON, NAGPUR AT AF STN SONEGAON, NAGPUR
2023_MES_613028_1
8479/E8
Open Tender
Civil Works
Item Rate
180 days
Sonegaon
As per NIT
8 documents required · 8 mandatory
₹500
AGE (I) AF Sonegaon
₹14,400
Yes
23 Oct 2023
10 Aug 2023
19 Sept 2023
10 Aug 2023
12 Sept 2023
24 Aug 2023
10 Aug 2023 - 17 Aug 2023
Amount
Surface dressing not exceeding 15cm deep in soft/ loose soil complete all as specified and directed.
Excavation over areas in soft/ loose soil n. exc. 1.50m deep and getting out complete all as specified and directed.
Excavation in trenches in soft/ loose soil n. exc. 1.50m wide and n. exc. 1.50m deep for foundation, or for shafts, wells, cesspits, manholes, etc., n. exc. 10 sqm on plan getting out complete all as specified and directed.
Excavation in trenches in hard/dense soil n. exc. 1.50m wide and n. exc. 1.50m deep for foundation, or for shafts, wells, cesspits, manholes, etc., n. exc. 10 sqm on plan getting out complete all as specified and directed.
Removing excavated soil exceeding 1.5Km and not exceeding 5Km and depositing where directed complete all as specified and directed.
Removal of excavated materials to a distance not exceeding 50 mtrs and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.
Returning, filling in and including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed.
M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed.
M&L for hardcore of broken stone or boulders of gauge not exceeding 63mm,deposited, spred and levelled in layer not exceeding 15cm thick, watered and rammed to true surface complete all as specified and as directed.
M&L for PCC 1:4:8, type D2, using 40mm graded stone aggregate as in foundation filling and mass concrete all as specified and as directed.
M & L for brickwork with flyash bricks using old size bricks straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed.
M&L for brick work with subclass "B" bricks, straight or curved on plan to any radius with old size bricks in half brick thick walls built in CM 1:4 all as specified and as directed.
M&L for brick work with sub class 'B' bricks, straight or curved on plan exceeding 6 metre mean radius with old size bricks built in CM 1:6 all as specified and as directed.
M&L for brick work with sub class 'B' bricks, straight or curved on plan exceeding 6 metre mean radius with old size bricks built in CM 1:4 all as specified and as directed.
M & L for providing dry river sand as in sand cushioning for underground cable protection including punning down sand in layers complete all as specified & directed Note: Only punned thickness of sand shall be considered for measurement purposes
Supplying and laying common burnt clay sub class ‘B’ bricks of size 230 mm x 115 mm x 75 mm, laid perpendicular to axis of cable for protection of LT cables complete all as specified and directed.
M & L road cutting of size 30 cm width x 45 cm depth for laying of cables including making good the road with necessary returning filling and bituminious portion with concrete and bituminious mixture and cemented portion with PCC in 1:2:4 , 15 cm thick from top and matching the surfaces with existing complete all as specified and directed.
M&L for precast cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in precast cover slab with plain faces for manholes set in cement mortar (1:6) including necessary form work complete all as specified and directed.
M&L for PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in coping, channels, water troughs and the like including weathering, slightly rounded or chamfered angles and throating etc. complete all as specified and directed.
M&L for providing RCC (1:2:4) type B-1 using 20mm graded stone aggregate as in foundations including rafts, footings, foundation beams, plinth beams, bases for columns etc., and mass concrete complete all as specified and directed.
M&L for providing RCC (1:2:4) type B-1 using 20mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.
M&L for providing RCC (1:2:4) type B-1 using 20mm graded stone aggregate as in Columns, pillars, piers, posts and struts complete all as specified and directed.
Use and waste of formwork to foundations, fillings, bases of columns, rafts & raft beams, sides & soffits of foundation & plinth beams and similar works; vertical or batter for rough finished surface of concrete complete all as specified and as directed.
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, including supports, overhangs, etc. also splays between floors and beams complete of flat rough finished surfaces of concrete all as specified.
Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions, rough finished surface of concrete square, rectangular or polygonal complete all as specified and as directed.
M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L for mild steel TMT bars 5mm dia and over up to and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-500D complete all as specified and as directed.
S&F framed work such as grills, gratings etc., with ends of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks & similar work conforming to Fe 290 Gde-E-165 complete all as specified and directed.
S&F Fe 410-W (Gde-E- 250) quality-A Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed.
S&F rolled mild steel framed work as in main and cross beams, hip and jack rafters purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates Fe 290 Gde-E-165 complete all as specified and directed.
M & L for Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 ® complete all as specified and directed.
S&F 11mm to 15mm dia Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exc 5cm long complete all as specified and directed.
S&F Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm in metal/wooden almunium frames including necessary beading, clips etc as required complete all as specified and directed.
S&f pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws complete all as specified and directed.
S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
M& L Non asbestos fibre cement building boards 6 mm thick fixed or laid/ inserted to timber/GI/Alumi nium framework with screw including particle board, medium density, flat pressed, single layer type or three layer type, BWR grade complete all as specified and as directed.
S & F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed.
Supply and fixing factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 48x40 mm (tolerance ± 1 mm), complete all as specified and directed.
M & L for 40mm thick PCC 1:2:4 Type BO Damp proof course to horizontal or vertical surfaces including necessary formwork complete all as specified and directed.
M & L for Applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 cu. m. per sq. m complete all as specified and directed.
S & F Polythene film, 50 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 kg per sq. m complete all as specified and directed.
M&L for 40mm thick PCC 1:2:4, type B1, using 40mm graded stone aggregate as in sub base of flooring all as specified and as directed.
M&L for 100mm thick PCC 1:3:6, type C2, using 40mm graded stone aggregate as in sub base of flooring all as specified and as directed.
M&L for 100mm thick PCC 1:4:8, type D2, using 40mm graded stone aggregate as in sub base of flooring all as specified and as directed.
M&L 75mm thick PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in plinth protection finished even and smooth without using extra cement complete all as specified and directed.
M&L Non - skid Ceramic colour tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors laid over 15mm thick screed bed in CM 1:6 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
M&L Glazed Ceramic colour tiles 350X450X 7 to 8 mm thick on vertical surfaces such as skirting/dados including back coat of plaster in CM 1:3 10mm thick complete all as specified and as directed.
M & L Machine cut cudappah stone slab 20-25mm thick over 20mm thick cement screed bed 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete complete all as specified.
Material & labour for Granite (of any type of colour) 16-18mm thick machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigments to match the shades of granite stone incl cutting and granite polishing over 20 mm thick screed bed or bedding layer in cement mortar (1:3), all as spd and directed by EIC.
M&L for glossy chequered cement concrete tiles 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry as in floors with grey cement and pigment laid over and including 20mm thick screed bed in cement mortar (1:4) complete all as specified and directed.
M & L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat forms and like in cement mortar (1:4) including pointing in white cement (1:2) over 20 mm thick screed bed or bedding layer in cement mortar (1:6) using marble dust with admixture of pigment to match with shade of granite complete all as specified.
Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified.
M&L for 15mm thick rendering in cement mortar (1:4) on fair faces of brick work or concrete surfaces externally with water proofing compound finishing the surfaces even and smooth without using extra cement complete all as specified and directed. Note : WPC shall be measured and paid seperately.
M&L rendering 15mm thick in cement mortar (1:6) mixed on fair faces of brick/ concrete surface and the surface finished even and smooth without using extra cement complete all as specified and directed.
M&L for Preparing newly plastered surfaces of wall, Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.
M&L preparation of newly plastered surface of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.
Supply only liquid water proofing compound
M&L for Preparing newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer using chalk whitening complete all as specified and directed.
M &L for preparation new steel and iron surfaces not otherwise described exc 10cm width or girth and applying two coats of synthetic enamel paints over one coat of primer of red oxide complete all as specified and as directed.
M &L for preparation new steel and iron surfaces not otherwise described n.exc 10cm width or girth and applying two coats of synthetic enamel paints over one coat of primer of red oxide complete all as specified and as directed.
S&F sheet glass 5.5mm thick plain ordinary quality and glazing with beads fixed with metal panel pins in squares exc. 0.50 Sqm in each pane complete all as specified and directed.
M&L for cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate as in concrete bed to 200mm dia SGSW pipe including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed.
M&L 150 mm dia (internal) SGSW pipes grade ‘A’ laid in trenches jointed in CM 1:2 and tested after the pipes are laid jointed complete all as specified and directed
S & F angle stop valves cast copper alloy fancy type, chromium plated of size 15 mm bore all as specified and directed.
S&F 15mm PVC connection 450mm long with PTMT nuts of superior quality all as specified and directed.
Supply and laying of 15mm bore GI tubing medium grade with all fittings including cutting for branch line & making threads complete fixed to wall/flooring /ceiling etc or laid in trenches all as specified.
Supplying and laying GI pipe Light grade (ISI marked) 40mm bore with connecting accessories, laid under road/ drain/fixed on wall etc for protection of cables complete all as specified and directed
Supply and laying of 20mm bore GI tubing medium grade with all fittings including cutting for branch line & making threads complete fixed to wall/flooring /ceiling etc or laid in trenches all as specified.
S&F Bib tap 15 mm bore, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle confirming to IS screwed down, screwed for iron pipes or for brass ferrule, complete all as specified and as directed.
Supply and fix 20mm bore gun metal globe or gate valves with iron wheel head screwed both ends for GI pipe complete all as specified and as directed.
S&F 75mm dia UPVC (SWR) pipes single socketed in any length with rubber ring joints fixed on walls including PVC clamps etc. complete all as specified and directed.
S&F 75mm dia UPVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches etc. complete all as specified and directed.
S&F UPVC (SWR) bend any radius suitable for 75mm dia pipes complete all as specified and directed.
S&F UPVC (SWR) junction single (single T) equal or unequal suitable for 75mm dia pipes provided with access door complete all as specified and directed.
S&F 75mm dia oulet PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.
S&F sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, having bowl size 750mm x 450mm x 450mm including 38/40 mm dia waste pipe complete all as specified and as directed.
Cutting into existing manholes for connecting drains,of 100mm internal diaof pipe making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching complete all as specified and directed.
S&F Rotational Moulded Polyethylene water storage tanks, three layered (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part - I of capacity 500 litres complete all as specified and as directed.
M&L for point wiring complete with 1.5sqmm (nominal area) PVC insulated unsheathed multistranded, (two run for Phase and Neutral) copper conductor FR & LS grade cable of 1100V grade conforming to IS -694 drawn through and including new non metallic rigid PVC conduit medium grade, ISI marked, 20mm bore with conduit accessories concealed in wall/ floor and fixed on ceiling/ roof etc. including new pressed steel terminal boxes 1.6mm thick, concealed in walls with plastic laminated sheet cover 3mm thick as top cover fixed with cadmium plated screws for housing the switch sockets, outlets, fan regulator etc including provn of 1.5sqmm PVC insulated unsheathed copper conductor cable of green colour for earth continuity and connecting to common earth dolly etc., complete all as specified and directed for:-
One light/ fan/ exhaust fan point controlled by one switch.
One 3 pin switch socket outlet, 5amps on independent board controlled by one switch.
One three pin 5 Amps switch socket outlet on same board
Supply and fix switch piano, flush type, single pole, one way, 5 Amps, 230 volts all as specified and directed.
Supply and fix ceiling rose PVC/ Polycarbonate body 65 x 50mm 2 to 3 terminals 230 Volts, AC Single phase all as specified and directed.
Supply and fix switch socket combination 3 PIN, 6 Amps, flush type, 230 volts all as specified and directed.
Supply and fix Switch socket combination 2 in 1, 3 pin, 6 and 16 Amp flush type universal all as specified and directed.
M&L for point wiring complete with 2.5sqmm (nominal area) PVC insulated unsheathed multistranded, (two run for Phase and Neutral) copper conductor FR & LS grade cable of 1100V grade conforming to IS-694 drawn through and including new non metallic rigid PVC conduit medium grade, ISI marked, 20mm bore with conduit accessories concealed In wall/ floor and fixed on ceiling/ roof etc, including pressed steel terminal boxes 1.6mm thick, concealed in walls with plastic laminated sheet cover 3mm thick as top cover fixed with cadmium plated screws for housing the switch sockets, outlets, fan regulator etc including provn of 2.5sqmm PVC insulated unsheathed copper conductor cable of green colour for earth continuity and connecting to common earth dolly complete all as specified for 5 Pin 15 Amp switch socket combination on Independent board complete all as specified and directed.
Earthing with galvanised iron earth plate electrode 600 x 600 mm & 6 mm thick buried directly in ground (earth pit not less than 2.25 metre deep below normal GL) with top of earth plate not less than 1.5 metre below GL connected to GI earth lead wire 4 mm dia connected to earth plate electrode by means of GI nuts, bolts & washers earth wire protected with & including 15 mm dia medium grade ISI marked GI pipe not less than 7.5 metre long all as shown in electrical plate No. 3 MES Schedule Part 1, with & including ; PCC 1:3:6 type B1 reinforced with welded steel wire fabric not less than 4 Kg per Sq M, watering arrangements with 20 mm GI medium grade pipe ISI marked , GI funnel with GI mesh, filling with mixture of common salt & charcoal, necessary excavation and earth work in any type of soil, including test point, testing & commissioning, complete all as specified and as directed. Note : On testing after completion if the desired earth resistance is not obtained the earthing will be redone at no extra cost to the Government. GI earth wire with GI pipe protection beyond 7.5 metre measured & paid separately
M & L concealed sub main wiring with two single core cable of 4 sqmm PVC insulated , 1100 volt grade as per IS 694, with multistranded copper conductor in and including rigid PVC conduit (ISI Marked) including earthing wire of pvc insulated stranded 4 sq mm cable ,chess cutting including S/F of 20 mm dia PVC conduit with elbow,bends,couplers,tee, sunken boxes pressed steel box mounting fitting/junction boxes etc covered the conduit with cement mortar after drawing of electric cables and making good of disturbed surfaces and match with existing shade of wall/roof complete all as specified and directed.
Supply, fix, connecting and testing factory made, MCB distribution board (MCB DB), IP 38, SPN, 4 way, 240 Volts, single door, flush type made out of 1.2mm thick CRCA sheet metal, Phosphatised, duly powder coated and conforming to IS 13032 with 200 Amps rated bus bar, neutral link, earth bar and din rail etc. complete fixed in switch board/ wall complete all as specified and directed. Note: MCBs shall be measured and paid separately.
Supply, fix, connecting and testing MCB single pole and neutral (MCB SPN), 32Amps, 240 volts of rupturing capacity 10kA, C curve type complete all as specified and directed.
Supply, fix, connecting and testing MCB single pole (MCB SP), 6 to 32Amps, 240 volts of rupturing capacity 10kA, C curve type complete all as specified and directed.
Supply and lay in trenches/drawn through pipes or in road crossings / paths/ drains / ducts / floors / along poles / equipments etc., of LT cable under ground, XLPE insulated, screened, PVC bedded, galvanised strip or wire armoured, heavy duty electric cable with stranded aluminium conductor, 1100 volts grade of cross sectional area 10 Sqmm 2 core including connecting up using suitable size aluminium lugs testing and commissioning complete all as specified and as directed. Note : Excavation earth work, sand cushioning and brick protection shall be measured and paid separately.
Supply and lay in trenches/drawn through pipes or in road crossings / paths/ drains / ducts / floors / along poles / equipments etc., of LT cable under ground, XLPE insulated, screened, PVC bedded, galvanised strip or wire armoured, heavy duty electric cable with stranded aluminium conductor, 1100 volts grade of cross sectional area 16 Sqmm 4 core including connecting up using suitable size aluminium lugs testing and commissioning complete all as specified and as directed. Note : Excavation earth work, sand cushioning and brick protection shall be measured and paid separately.
S&F Red led aviation/obstruction light , die cast aluminum housing with red polycarbonate dome for better illumination and with internal driver 10 watt with IP 65 protection, 50Hz and 240V installed at the top of pole complete, all as specified and as directed
S&F water proof LED spot light 30W with IP 65 protection which turn with the wind & for 50 Hz and 240V complete, all as specified and as directed
S&F thermo plastic looping boxes, factory made, IP 65 sheet of size 230X170X105 mm fixing on pole with 30X5 mm clamps, nuts, bolts, washers, terminal block and glands suitable for 10 sqmm core cable including 6 Amps MCB SPN complete, all as specified and as directed
S & F 20 Watt LED Bldg security light with a nominal system. The luminaire shall have rated system lifetime of 50,000 burning hours at L70. The luminaire should have cool white colour temperature (CCT>5000K) and a CRI>70. The luminaire shall meet IP66 rating with THD<20% & pf>0.9. The luminaire housing should be made of pressure die cast aluminimum. The total power consumption should not exceed 25W (including driver) pre wired fitted on and including two Nos PVC block of suitable size and connection up to tube light fitting with connecting up with copper 3 core flexible cord of minimum size 0.5 Sqmm and testing complete including LED lamp complete all as specified and as directed.
S & F 36Watt Recessed LED perforated Single Window modern Designed enabled by advanced LFD light.it blandes into ceiling plane &maintain Uniform luminance across aperature to enhance visual comfort ceiling tile provided with a drop down acrylic diffuser suitable for 600X600 MM ceiling including extra frame for fixing at POP/ Gypsum Ceiling mounted version including LED light complete. The 36W system shall be operating at 220-240v AC supply having internal driver. IP20, surge protection 2KV, ambient temperature (-) 20 to 45 degree C, frequency 50 to 60 Hz. . PF should be greater than 0.95, THD < 10%. Individual LED's should not be visible for glare free output, and connection up to tube light fitting with connecting up with copper 3 core flexible cord of minimum 1.5 Sqmm size and testing complete, all as specified and as directed
S & F table fan with complete accessories 230 V, single phase oscillating type 400mm sweep complete all as specified and directed.
Supply & Fix desert cooler electric driven (single phase) having nominal air flow capacity of 4000 CuM per hour Steel Body complete all as specified and directed.
Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and directed.
S&F sheet glass 5.5mm thick plain ordinary quality and glazing with beads fixed with metal panel pins in squares not exc. 0.50 Sqm in each pane complete all as specified and directed.
PURVA ENTERPRISES
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .