Providing Re wiring and LED Fixtures in Sarojni Hostel Govt.Polytechnic Kandaghat Distt. Solan.

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.Group C

Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required.Group C

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

4 X 4 sq. mm + 2 X 4 sq. mm earth wire

2 X 10 sq. mm + 1 X 6 sq. mm earth wire

Supplying and drawing following size of PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface / recessed, Steel/PVC conduit as required.

3x1.5 Sq. mm.

3x4 Sq. mm.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required:-25 mm. dia

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.

5/6 amps switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 A socket outlet and 5/6 A piano type switch, connections, painting etc. as required.

Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required.

Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.

Providing and installation of following surface mounting slim Square/ round type LED downlight in white finish with anti glare polycarbonate diffuser and energy efficient constant current, non-integral, electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connections, testing and commissioning etc. as required. Make: Philips, Syska, Bajaj,C&S, Panasonic or any other approved by Engineer-in-Charge.

Round LED Panel Light 6/7 W Surface

Square LED Panel Light 10/12 W Surface

Square LED Panel Light 15 W Surface

Square LED Panel Light 18/20 W Surface

Square LED Panel Light 36 W Surface

Providing and installation of following type of LED batten with aluminium housing, anti glare polycarbonate diffuser and energy efficient constant current, integral electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, including mounting clamps, connections, testing etc. as required: of Approved Make

LED Batten Light 20W

Supplying and fixing of following LED bulk head fitting with all accessories including making connections, testing etc. as required. Make C&S, Philips, Panasonic or any other approved by Engineer-in-Charge.

LED bulk head 10W

Supplying and fixing bakelite batten/angle holder including connections etc. as required:-

Supplying and fixing of fancy wall bracket suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, lamp holder, but excluding lamp including making connections, testing etc. as required: of Approved Make. Wall light fixture Polycarbonate body, suitable for 9 W retrofit LED lamp B22 base.

Providing and installation of LED 9W retrofit lamp B-22/E-27 holder base with polycarbonate body and aluminium heat sink; suitable for input voltage: AC 220-240 V,50/60Hz, including mounting in existing fixture, testing etc. as required complete in all respects. Make: Philips, Syska, GE, Bajaj, C&S, Panasonic or any other approved by Engineer-in-Charge.

Supplying and fixing of street light 45W LED IP65, versatile pressure die-cast alluminium IP 65 with high power LEDs as light source & exclusively designed polycarbonate cover alongwith electronic driver, complete with all accessories including making connections, testing etc. as required. Make:-C&S, Havells,Philips,Panasonic, SYSKA or any other approved by Engineer-in-Charge.

Supplying and erection of street light bracket made of G.I. pipe 'A' class of suitable length and dia, the pipe bended to give an angle of 100 to 110 degree fitted with bolt & nuts at the top of existing pole or wall including painting the pipe with two coats of approved paint over priming coat complete in all respects as required:- 32 mm dia. G.I. pipe, heavy class

Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required: of Approved Make

Ceiling Fan 1200 mm sweep

Ceiling Fan 1400 mm sweep

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Providing and installation exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required: of Approved Make

Exhaust Fan, Heavy duty, 300 mm sweep

Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, making good the damages, electrical connections, testing etc. complete as required:-

25 Liter capacity water heater (Cat-A)

35 Liter capacity water heater (Cat-A)

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Supplying and fixing Higher Rating (80 to 125A) 240/415 volts,10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.MCB DP 50/63 A 'C' curve

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

8 way , Double door

12 way , Double door

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required

Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.

Providing & Laying of one number aluminium conductor, PVC insulated and PVC sheathed armoured/ XLPE power cable, 1.1 KV grade of following sizes on wall surface as required.

Armoured cable 35 sq. mm (3.5 core)

Armoured cable 70 sq. mm (3.5 core)

Supplying and erection light sub- panel 63 Amp made from 1.6mm thick M.S. sheet steel duly fabricated in a segregated manner for housing of switch fuse units, by welding each compartment on five sides & front side hinged, complete with locking arrangement to house 63 Amp. MCCB with 100 Amp Copper busbar & 1 set RYB light indicator and cable alley as required complete in all respects including the cost of switchgears. The cubical pedestal shall have cable entry box at one side, with epoxy powder coated approved paint and bonding to the existing earth etc.

Supplying and erection light sub- panel 125 Amp made from 1.6mm thick M.S. sheet steel duly fabricated in a segregated manner for housing of switch fuse units, by welding each compartment on five sides & front side hinged, complete with locking arrangement to house 125Amp. MCCB with 200 Amp Copper busbar & 1 set RYB light indicator and cable alley as required complete in all respects including the cost of switchgears. The cubical pedestal shall have cable entry box at one side, with epoxy powder coated approved paint and bonding to the existing earth etc.

CHANDEL ELECTRICAL ENGG WORKS

Rakesh Kumar

sai electricals

Nand Ram

GOLD CUBE AUTOMATIONS AND ENERGY

Sharma and Company

Bhardwaj Electrical Co.

Kalra Hardware and Electric Store

Kumar Enterprises

Haminder Pal

D.S Ranta Electrical Contractor

M/s Naresh Elecric Works