REPAIR TO FENCE DRAIN AND COMPOUND WALL SOUTH SIDE AT AIR FORCE STATION SRINAGAR

Amount

Demolition of Brickwork or stone/boulder masonry, laid dry, including removal of debris from the site of work, complete all as specified and as directed by Engineer-in-Charge.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) including removal debris from the site of work, complete all as specified and directed by Engineer-in-Charge.

Dismantling fencing wire mesh, any type Complete all as specified and as directed by the Engineer-in-Charge.

Taking down cement or cement lime plaster, any description on brick/stone wall etc, etc. including raking out joints, hacking for key, scrubbing down with water, etc, including removal of debris from the site of work, complete all as specified and directed by Engineer-in-Charge.

Material and Labour for Plain cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed by Engineer-in-Charge.

Material and Labour for Plain cement concrete 1:2:4 type B2 using 40mm graded stone aggregate as in bedding of surface channels and drains complete all as specified and directed by Engineer-in-Charge.

Material and Labour for Plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including eathering, slightly rounded or chamfered angles and throating complete all as specified and directed by Engineer-in-Charge.

Material and Labour for Plain cement concrete 1:3:6 type C2 using 40mm graded stone aggregate as in post holes, foundation filling and mass concrete complete all as specified and directed by Engineer-in-Charge.

Material and Labour for Walling of random rubble uncoursed well bonded bedded and solidly hearted built in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge.

Material and Labour for Walling of random rubble uncoursed well bonded bedded and solidly hearted built in cement mortar 1:4 but except stone complete all as specified and directed by Engineer-in-Charge.

Material and Labour for Brick work with subclass 'B' bricks, strainght or curved in plan exceeding 6 mtr mean radius built in cement mortar 1:4, complete all as specified and directed by Engineer-in-Charge.

Material and Labour for Brick work with subclass 'B' bricks, strainght or curved in plan exceeding 6mtr mean radius built in cement mortar 1:4 but except bricks complete all as specified and directed by Engineer-in-Charge.

Material and Labour for Rendering 15mm thick on fair faces of brick work or concrete surface in cement mortor 1:4 including finished even and fair without using extra cement complete all as specified and directed by Engineer-in-Charge.

Material and Labour for Rendering 20mm thick on stone masonry surface in cement mortor 1:4 including finished even and fair without using extra cement complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-Charge.

Material and Labour for Precast reinforced cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in landings, cover slabs (for drain and man holes etc.) and similar articles with plain faces including chamfers, weatherings, throating etc and setting in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.

Demolition and breaking up drain pipes 450mm dia NP-2 set in cement mortar complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing 450mm dia reinforced concrete pipes, class NP2, conforming to IS: 458-2003, laid and jointed complete with collars complete all as specified and directed by Engineer-in-Charge.

Dismantiling -posts or struts (wood, steel RCC) any section, including taking out embedded portion and making good disturbed ground (Posts embedded in, concrete, brick work, masonry, etc)complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing Mild steel work as in angle iron posts and struts in fencing posts including cutting top to shape as directed, drilling, holes notching for wire, etc. iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc, and similar work conforming to Fe-410-0 or Fe-310-0 complete all as specified and directed by Engineer-in-Charge.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed by Engineer-in-Charge.

Supply only Chain link MS galvanised fencing fabric (Cold electro galvanised) any size or type complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing Mild steel screw bolts of dia 16 to 20mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut,of length of bolt exc 22.5cm and n exc 30cm long etc fixed in repairs complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails strainging bolts, including, securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc. (each line wire to be measured ) as in repairs complete all as specified and directed by Engineer-in-Charge.

Material and Labour for Preparation of new surfaces of steel and iron surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.

Material and Labour for Preparation of new surfaces of steel and iron surfaces of any description, over 10 cm width or girth when unconnected with other painting or when painted in a different tint including rubbing, and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.

Material and labour for Preparation of old or previously untreated steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamal paint complete all as specified and directed by Engineer-in-Charge.

Material and labour for Cleaning of existing Drains at any depth by removing the covers of any type / size and cleaning by means of hydraulic jet pressure machine required at site and well flushing with water after cleaning including getting out sludge if any and liquid materials from removing the solids and sludge to any distance place outside the defence land and reinstating the cover to its original position (cost removal of sludge / liquid material from drains in the same line is included in the rate of this item) complete all as specified and directed by Engineer-in-Charge.

M/S M.R. Construction

M/S maqsood enterprises

NAJAR ENTERPRISES

M/S A.R.TANTARY

M/S Thakur & Sons

M/S Abdul Ahad Rather

M/S Wani and Sons

M/S RATHER CONSTRUCTION CO

M/S Haji Zahoor Hussain Ganai

M/S GULZAR ENTERPRISES