REPAIR / MAINT/SERVICING OF PACKAGED TYPE AC PLANT, COOLING APPLIANCES AND RO SYSTEM AT MIRC AND CQA(V) AREA UNDER GE (S) AHMEDNAGAR

Amount

M&L in repairs, 100mm thick, insulation sheet as per existing type for packing purpose of storage room at magzine AC plant all as specified and as directed

S&F in repair NRV suitable for Refrigerator/Deep Freezer any capacity complete all as specified and as directed

Taking down PVC/MS desert cooler of any size and make from bracket/ stand, spanning all three side shutters and taking out old wooden chips pad, cleaning outer and inner surface by rubbing with sand paper or wire brush, including water tank complete and replacement of cooling pad of set of three of any size, superior quality with chicken wire mesh, oiling/greasing to motor and pump including re-fixing properly at the same place as required at site.

M&L in repairs/replacement of fan motor, 3 speed, single phase 230V AC supply, connecting and testing for desert cooler of any type and capacity all as specified and as directed.

M&L in repairs/replacement of water circulating submersible pump with motor 1/20 HP, 230 volts AC, ISI marked including electric connection for desert cooler of any type and capacity all as specified and as directed.

M&L in repairs, cutting burnt winding of fan motor and rewinding with supper enameled aluminium winding wire and replacing gun metal bush shaft for desert cooler of any type and capacity all as specified and as directed.

M&L in repairs, fan blade made of aluminium for desert cooler of any type and capacity all as specified and as directed.

M&L in repairs, fan blade made of plastic of superior quality for desert cooler of any type and capacity all as specified and as directed.

S&F in repairs, switch piano, flush type, 6 amp, 230V, AC, one way all as specified and as directed.

S&F in repairs, plug top, 3 pin, 6 amp, 230V AC, ISI marked all as specified and as directed.

M&L in repairs, Socket outlet 3 pin, 6A, flush type, 230 V complete all as specified and as directed.

M&L in repairs, cooling pad of set of three of any size superior quality with chicken wire mesh for desert cooler of any type and capacity all as specified and as directed.

M&L in repairs, PVC water distributor with PVC elbow and pipe for desert cooler of any type and capacity all as specified and as directed. Note:- This item includes the cost of elbow - 03 Nos, pipe-03 Nos of required length and dia and distributor -01 No

M&L in repairs, PVC insulated, sheathed, flexible, round, 3 core cable with copper conductor of size 1.0 sqmm, 2m length with 3 pin top all as specified and as directed.

S&F in repairs, capacitor 4 mfd all as specified and as directed.

S&F in repairs, PVC pipe, 15mm dia, heavy duty, all as specified and as directed.

S&F in repairs, 3 speed regulator switch for desert cooler complete all as specified and as directed.

S&F in repairs, mild steel adjustabel stand made with angle, flats, plates, nuts, bolts, washers including welding, bending cold or hot, drilling holes for bolts as in in any shape or size including painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

S&F in repairs, GI pipe, 15mm bore, medium grade, ISI marked, laid on floor/fixed on walls for desert cooler/ water cooler connections all as specified and as directed.

S&F in repairs, GI pipe, 20mm bore dia, medium grade, ISI marked, laid on floor/fixed on walls for desert cooler/ water cooler connections all as specified and as directed.

S&F in repairs, gun metal gate valve, 15mm bore dia, ISI marked with iron wheel, both end internally screwed for GI pipe all as specified and as directed.

S&F in repairs, gun metal gate valve, 20mm bore dia, ISI marked with iron wheel, both end internally screwed for GI pipe all as specified and as directed.

M&L for repair to body (viz. sides, base, bottom of tank) of water cooler of any make/size by replacing rusted worn out portion with suitable plain mild steel sheet of existing gauge to match original, mild steel angle iron suitable to match the existing body including transportation from MES store yard to repair shop and back complete all as specified and as directed.

Opening of voltage stabilizer of AC, single phase, 230V of 1/2/3/4/5 KVA capacity & make and detection of fault and replacement of defective parts like volt meter, auto cut relay, time delay relay PCB cards, LED, Switch Socket etc as per existing make and model as required at site. Note : Parts to be replaced will be measured and paid separately as 'S&F in repairs'.

S&F in repairs, volt meter of voltage stabilizer of AC all as specified and as directed.

S&F in repairs, auto cut relay as per existing make and model of voltage stabilizer of AC all as specified and as directed.

S&F in repairs, indicator lamp of voltage stabilizer of AC all as specified and as directed.

S&F in repairs, time delay relay as per existing make and model of voltage stabilizer of AC all as specified and as directed.

S&F in repairs, electronic circuit card with all components as per existing make and model of voltage stabilizer of AC all as specified and as directed.

S&F in repairs, LCD with PCB card for GN series stabilizers all as specified and as directed.

S&F in repairs, socket multi purpose, 2/3 pin, 6 amp all as specified and as directed.

S&F in repairs, transformer suitable for 1/2/3/4/5 KVA voltage stabilizer as per existing make & type complete all as specified and as directed.

Taking out hermetically sealed compressor unit (uncut) of refrigerator, single phase, 240 Volts, AC Supply for 165 to 180 ltr capacity of any make and replacing sealed unit with reconditioned sealed unit of same brand including following work all as specified and as directed. (Existing make - Godrej/ Whirlpool/ LG/ Voltas/ Carrier/ Blue star/ Kirloskar / Tuchmesh/ Usha (i) Connection to suction/discharge pipe with necessary repairs and brazing. (ii) Replacing capillary tube of existing size and copper liquid filters. (iii) Flushing of entire system before gas charging . (iv) Gas charging and testing the unit to the entire satisfaction complete.

All as per serial item No 33 but compressor unit of refrigerator 190 to 290 litre capacity.

All as per serial item No 33 but compressor unit of deep freezer 200 to 320 litre capacity.

S&F in repairs, heater for frost free refrigerator of any type and capacity, as per existing make & model all as specified and as directed.

S&F in repairs, freezer chest with cooling coil suitable for refrigerator 165 to 290 litre capacity as per existing make & model and fixing, connecting and testing complete all as specified and as directed.

S&F in repairs, freezer chest with cooling coil suitable for Deep freezer of 300 to 320 litre capacity as per existing make & model all as specified and as directed.

S&F in repairs, over load protector suitable for refrigerator of 165 to 320 ltr capacity as per existing make & model all as specified and as directed.

S&F in repairs, thermostat switch (auto de-frost) suitable for refrigerator of 165 to 320 ltr capacity as per existing make & model all as specified and as directed.

S&F in repairs, electric lamp pin/ threaded type, 240 volts, AC supply suitable for refrigerator of 165 to 320 ltr capacity as per existing make & model all as specified and as directed.

S&F in repairs, magnetic door gasket, superior quality, suitable for refrigerator/ Water Cooler of any capacity as per existing make & model all as specified and as directed.

S&F in repairs, leg, suitable for refrigerator/Water Cooler of any capacity as per existing make & model all as specified and as directed.

S&F in repairs, relay, suitable for refrigerator/deep freezer upto 320 ltr capacity as per existing make & model all as specified and as directed.

S&F in repairs, capillary tube and drier filter, suitable for refrigerator of 165 to 320 ltr capacity with brazing, nitrogen flushing, leak testing and gas charging all as specified and as directed. Note:- Charging of gas as specified by manufacturer will be measured and paid separately under respective item.

Taking out old hermetically sealed compressor unit (uncut) from water cooler, storage type, 40/80 ltr/hr cooling capacity and replacing the sealed unit with factory made new sealed unit of same brand as per existing, including the following work all as specified and as directed. (Existing make - Godrej, Whirlpool, LG, Voltas, Carrier, Blue star, Kirloskar, Tuchmesh, Usha) (i) Connection to suction/discharge pipe with necessary repairs and brazing.(ii) Replacing capillary tube of existing size and copper liquid filters.(iii) Flushing of entire system before gas charging. (iv) Gas charging and testing after repairs including installing the machine at site and testing on full load for its smooth functioning complete.

All as per serial item No 46 but for water cooler 60/120 ltr/hr cooling capacity.

All as per serial item No 46 but for water cooler 120/150 ltr/hr cooling capacity.

S&F in repairs, copper condensing coil with fixing arrangement of water cooler of 40/80 litre capacity complete all as specified and as directed.

S&F in repairs, fan blade for motor suitable for water cooler of 40/80 litre capacity as per existing make & model all as specified and as directed.

S&F in repairs, thermostat suitable for water cooler of 40/80 litre capacity as per existing make & model all as specified and as directed.

S&F in repairs, relay, suitable for water cooler of 40/80 litre capacity as per existing make & model all as specified and as directed.

S&F in repairs, over load protector, suitable for water cooler of 40/80 litre capacity as per existing make & model all as specified and as directed.

S&F in repairs, capacitor 10 mfd including necessary electrical connections, lugs, insulation tape etc complete suitable for water cooler of 40/80 litre capacity, all as specified and as directed.

S&F in repairs, PVC flexible drain pipe length 2 meter, with proper fixing clip as per existing type & size suitable for water cooler any capacity all as specified and as directed.

S&F in repairs, fan motor, 240 volts, single phase, AC supply, suitable for water cooler of 40/80, 60/120 & 150/150 litre capacity all as specified and as directed.

S&F in repairs, copper condensing coil with fixing arrangement of water cooler of 60/120 & 150/150 litre capacity all as specified and as directed.

S&F in repairs, fan blade for motor, suitable for water cooler of 60/120 & 150/150 litre capacity as per existing make & model all as specified and as directed.

S&F in repairs, thermostate, suitable for water cooler of 60/120 & 150/150 litre capacity, as per existing make & model all as specified and as directed.

S&F in repairs, relay suitable for water cooler of 60/120 & 150/150 litre capacity as per existing make & model all as specified and as directed.

S&F in repairs, over load protector suitable for water cooler of 60/120 & 150/150 litre capacity as per existing make & model all as specified and as directed.

S&F in repairs, internal wiring with PVC insulated copper conductor wire with lugs and thimbles complete suitable for water cooler of 40/80, 60/120 & 150/150 litre capacity all as specified and as directed.

M&L in repairs, rewinding of fan motor suitable for water cooler of 60/120 & 150/150 litre capacity of any make with super enameled copper wire of existing size and weight as required including replacement of bushing and capacitor of 4.0 mfd complete all as specified and as directed.

S&F in repairs, PTMT float valve assembly of 15 mm bore with plastic ball with suitable connections galvanized iron nipple 3” long and suitable GI sheet for fixing float valve suitable for water cooler of any make all as specified and as directed.

S&F in repairs, 15mm bore stop cock, cast copper alloy, ISI marked, all as specified and as directed.

S&F in repairs, GI pipe connector (male and female) 15mm bore pipe all as specified and as directed.

S&F in repairs, 15 mm dia, concussive push taps of stainless steel alloy, screwed for iron pipe for water cooler all as specified and as directed.

Dusting using blower and cleaning the housing from inside/out side, cooling system, cooling coil, condenser, capillary tube complete washing with CTC liquid and leak detection, testing for water cooler of 40/80, 60/120 & 150/150 litre capacity all as specified and as directed.

M&L for gas charging to compressors of refrigerator, 165 to 180 litre capacity to its full capacity with specified grade of refrigerant including other connected process required for gas charging and testing complete all as specified and as directed.

All as per serial item No 69 but for refrigerator, 190/200/290 litre capacity.

All as per serial item No 69 but for water cooler of 40/80 litres capacity

All as per serial item No 69 but for water cooler of 60/120 litres capacity

All as per serial item No 69 but for water cooler of 150/150 litres capacity

All as per serial item No 69 but for deep freezer 200 to 320 litre capacity

Taking out hermetically sealed compressor unit (uncut) from the Split/Window Air conditioner of any make & type of 1.5 TR capacity and replacing the sealed unit with new sealed unit complete including following work all as specified and as directed. (Existing Make:- Voltas/ Carrier/ Blue star/ Kirloskar/ Tuchmesh/ Usha/ Godrej/ Whirlpool/ LG/ Kenstar) (i) Connection to suction/discharge pipe with necessary repair and brazing. (ii) Replacing the capillary tubes of existing size and copper liquid filter. (iii) Flushing of entire system before gas charging. (iv) Gas charging and testing after complete repairs including installation of the machine at site and testing on full load for its smooth functioning complete.

All as per serial item No 75 but for Air Conditioner of 2.0 TR capacity.

All as per serial item No 75 but for Air Conditioner of 3.0 TR three phase capacity.

S&F in repairs, relay for existing make and model of AC, window type, capacity 1.5 TR, single phase, 240 Volts AC supply, including connecting and testing of relay all as specified and as directed.

S&F in repairs, thermostat with switch for existing make and model of AC, window type, capacity 1.5 TR all as specified and as directed.

S&F in repairs, starting capacitor 80/100 mfd including necessary electrical connections, lugs, insulation tape etc for existing make and model of AC, window type, capacity 1.5 TR all as specified and as directed.

S&F in repairs, PCB electronic circuit for existing make and model of AC, window type, capacity 1.5 TR all as specified and as directed.

S&F in repairs, remote for existing make and model of AC, window type, capacity 1.5 TR all as specified and as directed.

S&F in repairs, blower made of PVC heavy duty for existing make and model of AC, window type, capacity 1.5 TR all as specified and as directed.

S&F in repairs, condenser fan blade made of PVC heavy duty for existing make and model of AC, window type, capacity 1.5 TR all as specified and as directed.

S&F in repairs, running capacitor 50/60 mfd including necessary electrical connections, lugs, insulation tape etc for existing make and model of AC, window type, capacity 1.5 TR all as specified and as directed.

S&F in repairs, PVC air filter, 20 micron for existing make and model of AC, window type, capacity 1.5 TR all as specified and as directed.

S&F in repairs, internal wiring kit of PVC insulated copper conductor wire for existing make and model of AC, window type, capacity 1.5 TR all as specified and as directed.

S&F in repairs, over load protector for existing make and model of AC, window type, capacity 1.5 TR all as specified and as directed.

M&L in repairs, cutting, removing of burnt winding of fan motor/condenser fan motor of window type AC of any make and rewinding with super enameled copper winding wire of existing size and weight including replacement of bushing for existing make and model of AC, window type, capacity 1.5 TR all as specified and as directed.

S&F in repairs, copper condenser/ evaporator coil with brazing, nitrogen flushing, leak testing and gas charging for existing make and model of AC, window type, capacity 1.5 TR.all as specified and as directed. Note:- Charging of gas as specified by manufacturer will be measured and paid in respective item .

S&F in repairs, capillary tube and drier filter of any make for 1.5 TR window AC with brazing, nitrogen flushing, leak testing and gas charging complete all as specified and as directed. Note:- Charging of gas as specified by manufacturer will be measured and paid in respective item .

S&F in repairs, PCB electronic circuit for existing make and model of AC, window type, capacity 1.5 TR all as specified and as directed.

S&F in repairs, relay for existing make and model of split type AC of capacity 1.5 TR single phase, 240 Volts, AC supply including connecting and testing of relay all as specified and as directed.

S&F in repairs, thermostat with switch for existing make and model of split type AC of capacity 1.5 TR all as specified and as directed.

S&F in repairs, starting capacitor 80/100 mfd or suitable capacity including necessary electrical connections, lugs, insulation tape etc for existing make and model of split type AC of capacity 1.5 TR all as specified and as directed.

S&F in repairs, fan blade made of PVC, heavy duty for out door unit for existing make and model of split type AC of capacity 1.5 TR all as specified and as directed.

S&F in repairs, shut off valve brass with flair nut complete for existing make and model of split type AC of capacity 1.5 TR all as specified and as directed.

S&F in repairs, PCB electronic circuit including LCD of indoor/ outdoor unit of 1.5 TR of existing make and model of split AC all as specified and as directed.

S&F in repairs, remote for existing make and model of split type AC of capacity 1.5 TR all as specified and as directed.

S&F in repairs, swing assembly complete made of PVC, heavy duty for existing make and model of split type AC of capacity 1.5 TR all as specified and as directed.

S&F in repairs, swing motor, single phase, AC supply, for indoor unit.of existing make and model of split type AC of capacity 1.5 TR all as specified and as directed.

S&F in repairs, blower made of PVC, heavy duty for indoor unit of existing make and model of split type AC of capacity 1.5 TR all as specified and as directed.

S&F in repairs, running capacitor 45/50 mfd including necessary electrical connections, lugs, insulation tape etc for existing make and model of split type AC of capacity 1.5 TR all as specified and as directed.

S&F in repairs, PVC air filter, 20 micron for existing make and model of split type AC of capacity 1.5 TR all as specified and as directed.

S&F in repairs, internal wiring kit of PVC insulated copper conductor wire for indoor/outdoor unit of existing make and model of split type AC of capacity 1.5 TR all as specified and as directed.

S&F in repairs, over load protector for existing make and model of split type AC of capacity 1.5 TR all as specified and as directed.

M&L in repairs, cutting burnt winding of blower motor of split type AC 1.5 TR of any make and rewinding with super enamelled copper winding wire of existing size and weight including replacement of bushing all as specified and as directed.

S&F in repairs, condenser fan motor for Split AC 1.5 TR as per existing capacity 415 Volts, 50 Hz, speed up to 1000 RPM all as specified and as directed.

S&F in repairs, copper condenser/evaporator coil of outdoor/indoor units respectively of 1.5 TR split AC with brazing, nitrogen flushing, leak testing and gas charging complete all as specified and as directed. Note:- Charging of gas as specified by manufacturer will be measured and paid in respective item .

S&F in repairs, gromate with fixing arrangement for existing make and model of split type AC of capacity 1.5 TR all as specified and as directed.

S&F in repairs, capillary tube and drier filter of any make of 1.5 TR split AC with brazing, nitrogen flushing, leak testing and gas charging complete.all as specified and as directed. Note:- Charging of gas as specified by manufacturer will be measured and paid under respective item .

M&L for repair and refitting PCB electronic circuit of indoor/ outdoor unit of 1.5 TR of existing make and model of split AC all as specified and as directed.

M&L for repair & maintenance of heater of packaged type AC plant including coils, wires and other required spare parts all as specified and as directed.

S&F in repairs, relay as per existing make and model of split type AC of capacity 2.0 TR, single phase, 240 Volts, AC supply including connecting and testing of relay all as specified and as directed.

S&F in repairs, thermostat with switch of existing make and model of split type AC of capacity 2.0 TR all as specified and as directed.

S&F in repairs, starting capacitor 150/200 mfd including necessary electrical connections, lugs, insulation tape etc for existing make and model of split type AC of capacity 2.0 TR all as specified and as directed.

S&F in repairs, fan blade made of PVC heavy duty for out door unit of existing make and model of split type AC of capacity 2.0 TR all as specified and as directed.

S&F in repairs, shut off valve brass with flair nut for existing make and model of split type AC of capacity 2.0 TR all as specified and as directed.

S&F in repairs, PCB electronic circuit including LCD for existing make and model of split type AC of capacity 2.0 TR all as specified and as directed.

S&F in repairs, remote for existing make and model of split type AC of capacity 2.0 TR all as specified and as directed.

S&F in repairs, swing assembly complete made of PVC, heavy duty of existing make and model of split type AC of capacity 2.0 TR all as specified and as directed.

S&F in repairs, swing motor, single phase AC supply for indoor unit.of existing make and model of split type AC of capacity 2.0 TR all as specified and as directed.

S&F in repairs, blower made of PVC heavy duty for indoor unit of existing make and model of split type AC of capacity 2.0 TR all as specified and as directed.

S&F in repairs, running capacitor 50/60 mfd or as per existing capacity including necessary electrical connections, lugs, insulation tape etc for split type AC of capacity 2.0 TR all as specified and as directed.

S&F in repairs, PVC air filter, 20 micron for existing make and model of split type AC of capacity 2.0 TR all as specified and as directed.

S&F in repairs, internal wiring kit of PVC insulated copper conductor wire for indoor/outdoor unit of existing make and model of split type AC of capacity 2.0 TR all as specified and as directed.

S&F in repairs, over load protector of existing make and model of split type AC of capacity 2.0 TR all as specified and as directed.

M&L in repairs for cutting burnt winding of blower motor of existing make and model of split type AC 2.0 TR of any make and rewinding with super enamelled copper winding wire of existing size and weight including replacement of bushing all as specified and as directed.

S&F in repairs, condenser fan motor for Split AC 2.0 TR as per existing capacity 415 Volts, 50 Hz, speed up to 1000 RPM all as specified and as directed.

S&F in repairs, copper condenser/evaporator coil of outdoor/ indoor units respectively of 2 TR split AC with brazing, nitrogen flushing, leak testing and gas charging complete all as specified and as directed. Note:- Charging of gas as specified by manufacturer will be measured and paid in respective item .

Removing, repairing & refixing, copper condenser/ evaporator coil of outdoor/ indoor units respectively of 2 TR split AC with brazing, nitrogen flushing, leak testing and gas charging complete all as specified and as directed. Note:- Charging of gas as specified by manufacturer will be measured and paid in respective item .

S&F in repairs, gromate with fixing arrangement for existing make and model of split type AC of capacity 2.0 TR all as specified and as directed.

M&L for repairs, old PCB electronic circuit of indoor/ outdoor unit for 2.0 TR Split AC and repair and refixing same all as specified and as directed.

S&F in repairs, relay as per existing make and model of split type AC of capacity 3.0 TR, three phase Three phase, 240 Volts, AC supply including connecting and testing of relay all as specified and as directed.

S&F in repairs, fan blade made of PVC heavy duty for out door unit of existing make and model of split type AC of capacity 3.0 TR, three phase all as specified and as directed.

S&F in repairs, shut off valve brass complete with flair nut for existing make and model of split type AC of capacity 3.0 TR, three phase all as specified and as directed.

S&F in repairs, PCB electronic circuit including LCD for existing make and model of split type AC of capacity 3.0 TR, three phase all as specified and as directed.

S&F in repairs, remote for existing make and model of split type AC of capacity 3.0 TR, three phase all as specified and as directed.

S&F in repairs, swing assembly complete made of PVC heavy duty for existing make and model of split type AC of capacity 3.0 TR, three phase all as specified and as directed.

S&F in repairs, swing motor, single phase AC supply for indoor unit. for existing make and model of split type AC of capacity 3.0 TR, three phase all as specified and as directed.

S&F in repairs, blower made of PVC heavy duty for indoor unit for existing make and model of split type AC of capacity 3.0 TR, three phase all as specified and as directed.

S&F in repairs, PVC air filter, 20 micron for existing make and model of split type AC of capacity 3.0 TR, three phase all as specified and as directed.

S&F in repairs, internal wiring kit of PVC insulated copper conductor wire for indoor/outdoor unit of existing make and model of split type AC of capacity 3.0 TR, three phase all as specified and as directed.

S&F in repairs, over load protector. for existing make and model of split type AC of capacity 3.0 TR, three phase all as specified and as directed.

M&L in repairs for cutting burnt winding of condenser fan motor of split type AC of capacity 3.0 TR, three phase of any make/model and rewinding with supper enamelled copper winding wire of existing size and weight including replacement of bushing all as specified and as directed.

S&F in repairs,for cutting burnt winding of blower motor of split type AC of capacity 3.0 TR, three phase of any make/model and and rewinding with super enamelled copper winding wire of existing size and weight including replacement of bushing all as specified and as directed.

S&F in repairs, condenser fan motor for Split AC 3.0 TR three phase as per existing capacity 415 Volts, 50 Hz, speed up to 1000 RPM all as specified and as directed.

S&F in repairs, copper condenser/ evaporator coil of outdoor/ indoor units respectively of 3 TR split AC three phase with brazing, nitrogen flushing, leak testing and gas charging complete all as specified and as directed. Note:- Charging of gas as specified by manufacturer will be measured and paid in respective item .

Removing, repairing & refixing, copper condenser/ evaporator coil of outdoor/ indoor units respectively of 2 TR split AC with brazing, nitrogen flushing, leak testing and gas charging complete all as specified and as directed. Note:- Charging of gas as specified by manufacturer will be measured and paid in respective item .

S&F in repairs, gromate with fixing arrangement for existing make and model of split type AC of capacity 3.0 TR, three phase all as specified and as directed.

S&F in repairs, contactor for existing make and model of split type AC of capacity 3.0 TR, three phase all as specified and as directed.

M&L for repairs, old PCB electronic circuit of indoor/ outdoor unit for 3.0 TR Split AC and repair and refixing same all as specified and as directed.

Servicing of AC, window type, 1.5/ 2.0 TR capacity of any make, by cleaning the whole equipment, washing of filters, minor adjustments/repair, washing condenser unit all as specified and as directed.

All as per serial item No 153 but AC, split type, 1.5/2.0 TR capacity, indoor and out door unit.

All as per serial item No 153 but AC, split type, 3 TR three phase capacity, indoor and out door unit.

M&L for gas charging to compressors of AC, window type, 1.5 TR capacity of any make, installed machine/ equipment to its full capacity with specified grade (as per OEM recommended) of refrigerant including other connected process required for gas charging and testing complete all as specified and as directed.

All as per serial item No 156 but but AC, split type, 1.5 TR capacity of any make.

All as per serial item No 156 but but AC, split type, 2.0 TR capacity of any make.

All as per serial item No 156 but but AC, split type, 3.0 TR three phase capacity of any make.

Shifting of split AC of capacity 1.5/2.0 /3.0 TR including making hole in the brick/ shelter/ stone walls and making connections, fixing of brackets and insulating pipe lines with nitrile rubber, brazing of copper tubes including testing/ commissioning complete as required at site, including shifting of service connection, metal clad box and voltage stabilizer to the new location all as required. SOP is to be followed by proper pumping down of refrigerant gas before dismantling all as specified and as directed. Note : (i) The rate quoted for this item shall include transportation, civil work and making good to the disturb surfaces. (ii) Refrigerant pipes shall be measured and paid in respective item .

Shifting of AC window type of capacity 1.5/ 2.0 TR of any make complete with metal clad box, voltage stabilizer and service connection from one location to another and re-fixing the same by cutting steel/ wooden window/ removing glass pans etc and making opening for AC air tight by providing bedding/ rubber packing wooden frame etc complete including testing/ commissioning complete as required at site all as specified and as directed. Note : (i) The rate quoted for this item shall include transportation, civil work and making good to the disturb surfaces

S&F in repairs, connecting and testing copper refrigerant pipes, along with proper insulation with nitrile rubber of suitable size for incoming and outgoing pipes complete all as required at site for 1.5/2.0 TR/3.0 TR split AC all as specified and as directed. Note : One run of both copper pipes incoming and outgoing shall be measured as 01 RM unit for payment purpose

S&F in repairs, nylon pipe, cotton breaded, size 15mm dia, suitable for drain of split type AC, capacity 1.5/2.0/3.0 TR all as specified and as directed.

S&F in repairs, mounting frame/ stand including fasteners and nut bolts suitable for outdoor unit of split AC of any size complete all as required at site all as specified and as directed.

S&F in repairs and connecting PVC insulated and over all sheathed aluminium conductor, 10 sqmm, twin core, flat service connection, one end to be connected at sheet metal enclosure and other end at LT over head line at nearest pole all as required at site and as directed.

S&F in repairs, sheet metal enclosure, single pole & neutral with two pin & earth plug and socket with one MCB, single pole, 20 amp, 240 volts complete all as specified and as directed.

S&F in repairs, metalic plug top, 3 pin for AC point, single phase, 240 volts, AC ISI marked, all as specified and as directed.

S&F in repairs, metalic socket, 3 pin for AC point, single phase, 240 volts, AC ISI marked all as specified and as directed.

S&F in repairs, MCB, SP, 25 Amp, 10 KA, 'C' series all as specified and as directed.

M&L in repairs, PVC insulated, sheathed, flexible, round, 3 core cable with copper conductor of size 2.5 sqmm for AC all as specified and as directed.

M & L for cleaning surface of water cooler, refrigerator with detergent etc complete all as specified and as directed.

M&L in repairs, for duct insulation with resin bonded fibre glass wool roll of density 24 kg/Cum, with factory laminated aluminium vapour barrier, thickness of insulation as specified and including the following:- (a) M&L for cleaning the duct surface (to be insulated ) by scrapping carefully with wire brush etc. to make the surface completely free of millscale, dirt, dust, grease and other foreign materials, taking special care so that all duct joints are sealed against any leakage. (b) M&L for applying rubber based adhesive CPRX compound. (c) M&L for sealing of all longitudinal joints and circular overlaps with and including Aluminium foil tape 50 mm wide, to make the insulation leakproof. (d) M & L for securing the insulation with and including mechanically fastened nylon/steel straps of size 12 mm/50 mmat maximum intervals of 1.2 mtr.

Dismantaling unserviceable duct and fabricate and fix new GI sheet 24 gauge with C & SS rectagular / square duct made out of shapped hollow profile, duly factory boxed including all accessories such as corners cleat, carriage bolts , gasket and appropriate sealent on longitudinal joints complete all as specified and as directed.

Taking out unserviceable gasket of discharge and suction valves of packaged type AC plant of capacity 10 TR and replaceing the same with new gasket complete all as specified and as directed.

Taking out unserviceable pressure cut off cut-out and replacing the same with new pressure cut out of any type ,model, size required and testing for gas leakage complete all as specified and as directed.

M&L for servicing of packaged type AC of capacity 10 TR, three phase, blower, including dismantling, rewinding and re-installing and change of existing blower cloth, fan blade, duct work, filter, insulation material inside of packaged type AC unit and other materials. hermetically sealed compressor by removing nuts and blocking plates of suction and discharge valves, leakage testing with and including nitrogen gas arresting the leakage, charging refrigerent gas (R-22) or as per OEM recommended and fix new PCB reassembaling the complete system testing and commissioning of the compressor to the entire satisfaction of Engineer in charge. Notes :- (i) Replacement of material shall be measured and paid as supply only parts under the relevent items (ii) Refrigerant gas will be measured and paid under the relevent items (iii) Machining work as required deemed to be included in the unit rate quoted. (iv) The parts replaced shall be of make & size as per existing and shall be replaced after approval of Engineer-in-Charge.

S&F in repairs pressure gauge (low/high) for packaged air conditioning plant of 10TR capacity

S&F in repairs solenoid valve for packaged air conditioning plant of 10TR capacity

S&F in repairs suction valve for packaged air conditioning plant of 10TR capacity

S&F in repairs discharge valve for packaged air conditioning plant of 10TR capacity

S&F in repairs air filter as per existing shape and mateial for packaged air conditioning plant of 10TR capacity

S&F in repairs brass pressure valve 1/2 inches for packaged air conditioning plant of 10TR capacity of make BLUESTAR or as per existing at site.

S&F in repairs gas filter 1/2 inches for packaged air conditioning plant of 10TR capacity of make BLUESTAR or as per existing at site.

S&F in repairs filter drier for packaged air conditioning plant of 10TR capacity of make BLUESTAR or as per existing at site.

S&F in repairs out door unit condencing coil for packaged air conditioning plant of 10TR capacity of make BLUESTAR or as per existing at site.

S&F in repairs copper tubes for packaged air conditioning plant of 10TR capacity of make BLUESTAR or as per existing at site.

S&F in repairs cooling coil for packaged air conditioning plant of 10TR capacity of make BLUESTAR or as per existing at site.

S&F in repairs, Micro Computer Control (MCC)/Air conditioner control panel for control packaged type AC unit capacity of 10 TR viz contactor (Evap, Fan motor, compressor), overload relay (Evap, Fan motor), Reset P.B., Snubber, Toggle Switch, Thermostat, HI/LO PR control, Control relay, Glass fuse link compressor, Evap fan motor, Cond fan motor make Bluestar or as per existing at site all as specified and directed.

S&F in repairs, over load relay, suitable capacity as per existing size and make fixed in LT panel board of AC plant Capacity 10 TR complete all as specified and as directed.

S&F in repairs, power contactor ML-3, 63 A, 415 volts, 50 Hz ,TP for compressor motor all as specified and as directed.

S&F in repairs, MCB, TPN, 63 A, all as specified & as directed.

S&F in repairs, MCCB, TP, 100 A, 415 volts, all as specified & as directed.

S&F in repairs/replacement, new sealed reciprocating type compressor of capacity 5 ton suitable for the package unit AC of 2 x 5 TR capacity, three phase including soldering of copper pipe, cleaning of the refrigerant system of AC, charging of refrigerant and rubber pads for foundation, nuts and bolts etc. and testing & commissioning of AC plant complete all as specified and as directed. Make: Copeland / As per existing at site

S&F in repairs/replacement of condensor fan motor blades for packaged type AC including installation, commission and testing complete all as specified and as directed.

M&L for rewinding of condensor fan motor of capacity 0.75 HP, 415 Volts for packaged unit AC with super enamelled copper conductor wire of best quality, guage and weight and including replacement of insulation material, connection of plate and ressembling the motor including installation commision and testing complete all as specified and as directed.

S&F in repairs, voltage stabilizer, 5 KVA capacity for automatic operation, single phase, naturally air cooled, indoor type and designed for input variation between 170V to 250V with output voltage stablized at 230V with accuracy of (+) 2.5% complete all as specified & as directed.

S&F in repairs, voltage stabilizer, 2 KVA capacity for automatic operation, single phase, naturally air cooled, indoor type and designed for input variation between 170V to 250V with output voltage stablized at 230V with accuracy of (+) 2.5% complete all as specified & as directed.

S&F in repairs, digital thermometer to check temperature of explosive store suitable for packaged type AC complete all as specified and as directed.

Surface dressing around installations including cutting and dressing of the existing vegitation (small trees/bushes/plants/grass,etc) of all type and all sizes wherever required for the clear approach to the installation and the work alignment of area complete all as specified and as directed.

M&L for point wiring with 1.5 Sqmm (22/0.30mm) PVC insulated and unsheathed multistranded copper conductor cable, 1100 volts grade, ISI marked, FRLSH type drawn through and including PVC casing and caping (ISI marked) and its accessories such as Tee, elbow, jointer, elbow corner etc. fixed on surface of walls, columns/ beams alongwith 1.5 Sqmm (nominal area) copper conductor cable (multistranded) PVC insulated and unsheathed as earth wire connected to common earth dolly at one end and metalic bodies of luminaire/ fan at other end including PVC folding boards or wooden boards with sunmica top for mounting switches, sockets, fan Regulators, accessories etc for one 3 pin socket outlet, 5 Amps on independent board including taking down existing point wiring all as specified and as directed.

All as per serial item No. 200 but one 3 pin socket outlet, 15 Amps with 4.0 sqmm cable on independent board.

S&F in repairs, switch socket combination flush type 5 pin 5 Amp multipurpose 230 volts single pole one way suitable for 3 pin/2pin 5 Amp plug top white/ivory finish all as specified & directed.

S&F in repairs, switch socket combination multipurpose flush type 5 in 1 type, 6/16 Amps, 230V, AC all as specified & directed.

Overhauling of compressor & vaccumising of complete system of AC plant capacity 28 TR with vaccum pump descanning the refrigerent in suitable container with suitable precautions, isolating the reciprocating compressor by removing nuts and blocking plates of suction and discharge valves,opening compressor, replacement of unserviceable/damaged internal parts, reassembling complete and leakage testing with and including nirogen gas arresting the leakage, charging compressor oil and refrigerent gas (R-22) reassembaling the complete system testing and commissioning of the compressor to the entire satisfaction of Engineer in charge. Notes :- (i) Replacement of material shall be measured and paid under the relevent item (ii) Compressor oil and refrigerant gas will be measured and paid under the relevent items (iii) Machining work as required deemed to be included in the unit rate quoted.

Supply and filling of compressor oil ( Servo Freeze F-66 / Sheetal N - 51 / Clavus - 33) all as specified and as directed.

S&F in repairs, 3 pole power contactor having AC3 rating, 32 Amps with 2 NO + 2 NC Auxilliary Contacts all as specified and as directed.

S&F in repairs, 3 pole power contactor having AC3 rating, 25 Amps with 2 NO + 2 NC Auxilliary Contacts all as specified and as directed.

S&F in repairs, bimetal overload relay suitable for relay range 14-23 Amps all as specified and as directed.

S&F in repairs, bimetal overload relay suitable for relay range 9-15 Amps all as specified and as directed.

S&F in repairs, Star to Delta Delay Timer having variable time 9 - 30 Sec, 415V, AC all as specified and as directed.

S&F in repairs, V Belt of size B-102 all as specified and as directed. Make : Dunlop / Fenner.

S&F in repairs, V Belt of size B-76 all as specified and as directed. Make : Dunlop / Fenner.

S&F in repairs, oil filter cartridge for compressor SMC-8-65 all as specified and as directed.

S&F in repairs, oil pressure control switch MP 55 all as specified and as directed. Make : Danfoss

S&F in repairs, combine hight /low pressure switch MP- 15 all as specified and as directed. Make : Danfoss

S&F in repairs, solenoid valve for SMC 8-65 compressor, 3 Way, 230 Volt, AC all as specified and as directed. Make : Sporlon

S&F in repairs, 3 way by pass valve for SMC 8-65 compressor all as specified and as directed. Make : Rotey/AvCM

S&F in repairs, pressure gauge for R-22 refrigerant as per existing range all as specified and as directed.

S&F in repairs, thermometer with stem for AC plant as per existing range all as specified and as directed.

S&F in repairs, theremostat, 10 to 30 degree calcius, all as specified and as directed. Make : Honeywell / Danfoss

S&F in repairs, humidistat of 0 to 100% all as specified and as directed. Make : Honeywell / Danfoss

Supply and charging of refrigerant Gas R-22 for central and packaged type AC plant all as specified and as directed.

S&F in repairs, Current Transformer(CT), Ratio 50/5, 5VA, suitable for LT panel board, Bus Bar mounting, all as specified and as directed.

S&F in repairs, Current Transformer(CT), Ratio 100/5, 5VA, suitable for LT panel board, Bus Bar mounting, all as specified and as directed.

Supply only descaling liquid composition all as specified and as directed. Make : Clensol / scalgun - ws

S&F in repairs and connect fuse base, suitable for DIN fuse links, 63 Amps all as specified and as directed.

Supply, fix and connect DIN Type fuse links, 63 Amps, including taking down existing fuse link all as specified and as directed.

S&F in repairs, pre-air metallic filter of 20 micron, 90% effeciency all as specified and as directed.

S&F in repairs, micro `V' air filter nylon/fabric, media of capacity 6 micron, 98% efficienty of size 550 mm X 550 mm X 300 mm deep all as specified and as directed.

S&F in repairs, PVC filling blocks of size 300 mm x 200 mm x 150 mm, suitable for cooling tower all as specified and as directed. Make : Mihir/ Suvidha / Avirat

S&F in repairs, thermostat expansion valve of Cat Part No HVE - 16, all as specified and as directed. Make : Sporlon

S&F in repairs, rotary type sprinkler heater assembly suitable for 28 TR capacity complete all as specified and as directed.

S&F in repairs, and connect single phase preventer suitable for fully automatic Star / Delta starter or Direct - on - Line starter all as specified and as directed.

De-Scaling/cleaning of condenser coil (Two Nos condenser) condenser, connected water pipe lines, sluice valves, cooling tower complete with replacement of gasket , rusted nut, bolts & washers etc all as specified and as directed.

M&L for rendering 10 mm thick in cement mortar 1: 3 in patches for repairing damaged plaster of existing ducting, finished even and fair all as specified and as directed.

Disconnecting condenser, 28 TR capacity Central AC Plant and taking down carefully, drilling, tapping 12 mm and fixing ferrule / nipple, connect to 200 litre PVC Tank, filled with Diluted cleaning agent like scale gum/sulphuric acid and circulated by the help of 0.50 Hp Tully pump for at least for 2-4 four hours, opening both end covers and cleaning copper tubes with nylon brush till all scale / deposit is cleaned complete. Assembling connecting in position including new gasket set, nuts bolts and washer and testing for improved performance complete all as specified and as directed.

Servicing by opening / dismantling of Air handling unit (28 TR) including blower motor, shaft, bearing complete and assembling, refitting in situ and testing complete all as specified and directed. Note:- (i) Cost of minor spares are deemed to be included in quoted rate. (ii) Major spares parts will be measured separtely.

Dismantling cooling tower, taking out exhaust motor, PVC fills, cleaning internal surface, removing scale deposit on walls of FRP body, removing complete dust, dirt,algee, fungus growth and applying one coat of synthetic enamel paint including replacement MS mesh support to PVC fills, Assembling complete and testing on full load complete all as specified and directed.

Repairs / Maintenance of cooling tower basin by scraping, cleaning surface internal and external and applying two coat of FRP coating, 1mm thick inside surface and one coat of oval green enamelled paint out side body complete of cooling tower body including writing details of painting and cleaning complete all as specified and as directed.

S&F in repairs, butter fly / gun metal globe valve of 50 mm dia with iron wheel or handle complete all as specified and as directed. Make :- Kirloskar/Leader/BIR

S&F in repairs, butter fly / gun metal globe valve of 40 mm dia with iron wheel or handle complete all as specified and as directed. Make :- Kirloskar/Leader/BIR

S&F in repairs, MCCB 200 Amps ,4Pole, 415V , 50 Hz, 36 KA current carrying capacity with adjustable thermal magnetic release all as specified & as directed.

S&F in repairs, MCB, TPN , 32 A, complete all as specified & as directed.

Taking out sluice valve, 80 mm bore, refacing & refixing in the same position all as specified & as directed.

Taking LT shutdown, dismantle and remove the 30 HP electric motor of the mono block pump set / compressor/ blower/ cooling tower from existing foundation / position, shifting to authorized workshop for the repair work, removing the burnt winding, cleaning rotor / stator slots, re-winding the motor with super enameled copper wire of the size equivalent to the original winding including insulated packing materials, Varnishing, Heating, Drying etc, replacing the bearings, reassembling and installing back at it's original position, aligning, testing and commissioning on full load for 8 hrs continuous running all as specified & as directed.

All as per serial item No 245 but 20 HP elecrtic motor.

All as per serial item No 245 but 2 to 5 HP elecrtic motor.

M&L for reparing / servicing through authorised dealer of Manufacturer, 5 HP monoblock pump set including replacing followingh spares all as specified & directed by Engineer-in - Charge (a) Pump Shaft - 01 Nos (b) Bearing of suitable size - 02 Nos (c) Pump Impeller of suitable size - 02 Nos (d) Gland packing - 02 Nos (e) Nut bolts of suitable size - 01 Kg

Scraping the existing paint of compressor units, AHU, Pump sets, Valves, LT panel boards, connected pipe line and painting with two coats of approved synthetic enamel paint as directed.

Periodical maintenance (Once in 6 months) of electrically operated travelling(EOT) Cranes upto 20 mtr span, 3 Ton capacity, class -II medium duty floor operated comprising of hoist motor, micro motor, long travel motor, cross travel motor, gear box, control panel etc. including replaceing defetive part etc installed at CQA(V) TTP all as specified and directed. Note: (i) Spare parts will be measured and paid separately as 'Supply only' (ii) All consumables and T & P required for maintenance are inclusive of the rate quioted for the above.

Supply only copper conductor of size 4 SWG as per existing for EOT cranes all as specified and as directed.

Supply only end insulator for copper conductor as per existing make all as specified and as directed.

Supply only coupling set complete for 40 / 50 mm dia shaft all as specified and as directed.

Supply only ball bearing for gear box all as specified and as directed. Make- SKF/RADICON/Cranex.

Supply only LT motion chain guard, fixed in between LT shaft and LT motion wheel to prevent the slipage of LT chain from the wheel all as specified and as directed.

Supply only geared rotary limit switch, 3 phase, 415 volt, 50 Hz , 10 Amps for 3 Ton EOT crane suitable for any motion all as specified and as directed. Make- Sterlling Control / Speed 'O' Control

Supply only carbon brush for clutch for micro movment of EOT crane all as specified and as directed

Supply only steel wire rope, multi stranded, 1/2" dia, including manufacturer's test certificate , ISI marked, all as specified and as directed. Make: Usha Martin / South India Wire ropes.

Repair/servicing (Once in 4 months) to RO system with dismantling the accessories carefully of capacity 12 to 15 Ltrs and any type/make after disconnecting the electric connections if required, making necessary repairs by replacing following parts refixing the same in its original position testing and re-fixing properly at the same place all as specified and as directed. Notes :- Replacement of material shall be measured and paid under the relevent items

Supply only Pre filter for 12 to 15 Ltr capacity

Supply only Carbon block filter for 12 to 15 Ltrs capacity

Supply only UV for 12 to 15 ltrs capacity

Supply only Membrance 12 to 15 ltrs capacity

Supply only Pressure pump for 12 to 15 ltrs capacity

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc, including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement all as specified and as directed.

OM SAI ASSOCIATES

M/s ASPIRE ENGINEERING ENTERPRISES